Search Results (425)

Coffee cherry pulp (CCP), a coffee by-product rich in pectin and phenolic compounds, serves as a valuable substrate for microbial enzyme production, improving the nutritional and antioxidant properties of poultry feed. This study evaluated the potential of Kluyveromyces marxianus ST5 to produce pectin-degrading enzymes using CCP. Under unoptimized conditions, the pectin lyase (PL) and polygalacturonase (PG) activities were 3.29 ± 0.22 and 6.32 ± 0.13 U/mL, respectively. Optimization using a central composite design (CCD) identified optimal conditions at 16.81% (w/v) CCP, 5.87% (v/v) inoculum size, pH 5.24, and 30 °C for 48 h, resulting in PL and PG activities of 9.17 ± 0.20 and 15.78 ± 0.14 U/mL, representing increases of 178.7% and 149.7% over unoptimized conditions. Fermented CCP was further evaluated using an in vitro chicken gastrointestinal digestion model. Peptide release increased by 66.2% compared with unfermented CCP. Antioxidant capacity also improved, with significant increases observed in DPPH (32.4%), ABTS (45.0%), and FRAP (42.3%) assays, along with an 11.1% increase in total phenolic content. These results demonstrate that CCP bioconversion by K. marxianus ST5 enhances digestibility and antioxidant properties, supporting its potential as a sustainable poultry feed additive and contributing to the valorization of agro-industrial waste. Full article

This study aimed to evaluate solid-state fermentation (SSF) as a sustainable approach for the simultaneous detoxification of olive pomace (OP) and the production of industrially relevant enzymes. OP, a semisolid byproduct of olive oil extraction, is rich in lignocellulose and phenolic compounds, which limit its direct reuse due to phytotoxicity. A native strain of Aspergillus sp., isolated from OP, was employed as the biological agent, while grape pomace (GP) was added as a co-substrate to enhance substrate structure. Fermentations were conducted at two scales, Petri dishes (20 g) and a fixed-bed bioreactor (FBR, 2 kg), under controlled conditions (25 °C, 7 days). Key parameters monitored included dry and wet weight loss, pH, color, phenolic content, and enzymatic activity. Significant reductions in color and polyphenol content were achieved, reaching 68% in Petri dishes and 88.1% in the FBR, respectively. In the FBR, simultaneous monitoring of dry and wet weight loss enabled the estimation of fungal biotransformation, revealing a hysteresis phenomenon not previously reported in SSF studies. Enzymes such as xylanase, endopolygalacturonase, cellulase, and tannase exhibited peak activities between 150 and 180 h, with maximum values of 424.6 U·g⁻¹, 153.6 U·g⁻¹, 67.43 U·g⁻¹, and 6.72 U·g⁻¹, respectively. The experimental data for weight loss, enzyme production, and phenolic reduction were accurately described by logistic and first-order models. These findings demonstrate the high metabolic efficiency of the fungal isolate under SSF conditions and support the feasibility of scaling up this process. The proposed strategy offers a low-cost and sustainable solution for OP valorization, aligning with circular economy principles by transforming agro-industrial residues into valuable bioproducts. Full article

Coffee silverskin (CS), a by-product generated during coffee roasting, contains high levels of xylan hemicellulose and protein, making it a promising substrate for functional ingredient production. This study developed an integrated bioprocess to simultaneously produce bioactive peptides and xylooligosaccharides (CS-XOS) from CS. Conventional alkaline extraction (CAE) under optimized conditions (1.0 M NaOH, 90 °C, 30 min) yielded 80.64 mg of protein per gram of CS and rendered the solid residue suitable for XOS production. Enzymatic hydrolysis of the extracted protein using protease_SE5 generated low-molecular-weight peptides (0.302 ± 0.01 mg/mL), including FLGY, FYDTYY, and FDYGKY. These peptides were non-toxic, exhibited in vitro antioxidant activity (0–50%), and showed ACE-inhibitory activities of 60%, 26%, and 79%, and DPP-IV-inhibitory activities of 19%, 18%, and 0%, respectively. Concurrently, the alkaline-treated CS solid residue (ACSS) was hydrolyzed using recombinant endo-xylanase, yielding 52.5 ± 0.08 mg of CS-XOS per gram of ACSS. The CS-XOS exhibited prebiotic effects by enhancing the growth of probiotic lactic acid bacteria (μ_max 0.100–0.122 h⁻¹), comparable to commercial XOS. This integrated bioprocess eliminates the need for separate processing lines, enhances resource efficiency, and provides a sustainable strategy for valorizing agro-industrial waste. The co-produced peptides and CS-XOS offer significant potential as functional food ingredients and nutraceuticals. Full article

The use of chemical fertilizers has significantly increased crop yields but has also led to soil problems such as nutrient imbalance and salinization. In response, organic fertilizers have emerged as a crucial component for sustainable agricultural development. This study was designed to develop an easily applicable organic suspension fertilizer using peanut bran, the primary by-product of peanut oil extraction, as the main raw material. Fourier-transform infrared (FTIR) analysis revealed that 80 °C is the optimal heating temperature for forming a stable peanut-bran suspension. A comprehensive experimental investigation was conducted to evaluate the effects of different peanut bran addition levels, stabilizers, emulsifiers, and suspending agents on the stability of suspension fertilizers. The results identified the optimal suspension fertilizer formulation as comprising 20% peanut bran, 0.5% sodium bentonite, 0.1% monoglyceride, 0.2% sucrose ester, 0.02% carrageenan, and 0.3% xanthan gum. This formulation ensures good stability and fluidity of the suspension fertilizer while maintaining a low cost of 0.134 USD·kg⁻¹. The findings provide a scalable technological framework for valorizing agro-industrial waste into high-performance organic fertilizers. Full article

The growing demand for sustainable plant-based dairy alternatives has spurred interest in valorizing agro-industrial byproducts like hazelnut cake, a protein-rich byproduct of oil extraction. This study developed formulations for vegan ice cream using unfermented (HIC) and Aspergillus oryzae-fermented hazelnut cake (FHIC), comparing their physicochemical, functional, and sensory properties to conventional dairy ice cream (DIC). Solid-state fermentation (72 h, 30 °C) enhanced the cake’s bioactive properties, and ice creams were characterized for composition, texture, rheology, melting behavior, antioxidant activity, and enzyme inhibition pre- and post-in vitro digestion. The results indicate that FHIC had higher protein content (64.64% vs. 58.02% in HIC) and unique volatiles (e.g., benzaldehyde and 3-methyl-1-butanol). While DIC exhibited superior overrun (15.39% vs. 4.01–7.00% in vegan samples) and slower melting, FHIC demonstrated significantly higher post-digestion antioxidant activity (4.73 μmol TE/g DPPH vs. 1.44 in DIC) and angiotensin-converting enzyme (ACE) inhibition (4.85–7.42%). Sensory evaluation ranked DIC highest for overall acceptability, with FHIC perceived as polarizing due to pronounced flavors. Despite textural challenges, HIC and FHIC offered nutritional advantages, including 18–30% lower calories and enhanced bioactive compounds. This study highlights fermentation as a viable strategy to upcycle hazelnut byproducts into functional vegan ice creams, although the optimization of texture and flavor is needed for broader consumer acceptance. Full article

The sugarcane industry plays a crucial economic role worldwide, with sucrose and ethanol as its main products. However, its processing generates large volumes of by-products—such as bagasse, molasses, vinasse, and straw—that contain valuable components for biotechnological valorization. This review integrates approximately 100 original research articles published in JCR-indexed journals between 2015 and 2025, of which over 50% focus specifically on sugarcane-derived agroindustrial residues. The biotechnological approaches discussed include submerged fermentation, solid-state fermentation, enzymatic biocatalysis, and anaerobic digestion, highlighting their potential for the production of biofuels, enzymes, and high-value bioproducts. In addition to identifying current advances, this review addresses key technical challenges such as (i) the need for efficient pretreatment to release fermentable sugars from lignocellulosic biomass; (ii) the compositional variability of by-products like vinasse and molasses; (iii) the generation of metabolic inhibitors—such as furfural and hydroxymethylfurfural—during thermochemical processes; and (iv) the high costs related to inputs like hydrolytic enzymes. Special attention is given to detoxification strategies for inhibitory compounds and to the integration of multifunctional processes to improve overall system efficiency. The final section outlines emerging trends (2024–2025) such as the use of CRISPR-engineered microbial consortia, advanced pretreatments, and immobilization systems to enhance the productivity and sustainability of bioprocesses. In conclusion, the valorization of sugarcane by-products through biotechnology not only contributes to waste reduction but also supports circular economy principles and the development of sustainable production models. Full article

The development of active food packaging has evolved rapidly in recent years, offering innovative solutions to enhance food preservation and safety while addressing sustainability challenges. This review compiles and analyzes recent advancements (2019–2024) in release-type active packaging, focusing on essential oils, natural extracts, and phenolic compounds as active agents. Primarily plant-derived, these compounds exhibit significant antioxidant and antimicrobial activities, extending shelf life and enhancing food quality. Technological strategies such as encapsulation and polymer blending have been increasingly adopted to overcome challenges related to volatility, solubility, and sensory impact. Integrating bio-based polymers, including chitosan, starch, and polylactic acid, further supports the development of environmentally friendly packaging systems. This review also highlights trends in compound-specific research, release mechanisms, and commercial applications, including a detailed analysis of patents and case studies across various food matrices. These developments have already been translated into practical applications, such as antimicrobial sachets for meat and essential oil-based pads for fresh produce. Moreover, by promoting the valorization of agro-industrial by-products and the use of biodegradable materials, emission-type active packaging contributes to the principles of the circular economy. This comprehensive overview underscores the potential of natural bioactive compounds in advancing sustainable and functional food packaging technologies. Full article

Agricultural and industrial residues are increasingly recognized as valuable resources for sustainable innovation, offering significant potential for biotechnological applications. By integrating waste valorization into production systems, this approach aims to mitigate environmental impacts and enhance economic value across various sectors. The findings underline the critical need for further research and policy support to scale these solutions, advancing global sustainability goals through innovative resource management. In this perspective, this article reviews the utilization of key by-products, including coffee residues, sugarcane bagasse, whey, cassava wastewater (manipueira), and brewery waste, highlighting their transformation into high-value products such as biofuels, bioplastics, enzymes, bioactive compounds, and organic fertilizers. The discussion presented encompasses the challenges and opportunities in leveraging these residues, emphasizing the role of advanced technologies, intellectual property, and circular economy principles. Full article

Alperujo, a solid by-product from the two-phase olive oil extraction process, poses significant environmental challenges due to its high organic load, phytotoxicity, and phenolic content. At the same time, it represents a promising feedstock for recovering value-added compounds such as phenols and volatile fatty acids (VFAs). When used as a substrate for white rot fungi (WRF), it also produces ligninolytic enzymes. This study explores the use of two native WRF, Anthracophyllum discolor and Stereum hirsutum, for the biotransformation of alperujo under solid-state fermentation conditions, with and without supplementation of copper and manganese, two cofactors known to enhance fungal enzymatic activity. S. hirsutum stood out for its ability to release high concentrations of phenolic compounds (up to 6001 ± 236 mg gallic acid eq L⁻¹) and VFAs (up to 1627 ± 325 mg L⁻¹) into the aqueous extract, particularly with metal supplementation. In contrast, A. discolor was more effective in degrading phenolic compounds within the solid matrix, achieving a 41% reduction over a 30-day period. However, its ability to accumulate phenolics and VFAs in the extract was limited. Both WRF exhibited increased enzymatic activities (particularly Laccase and Manganese Peroxidase) with the addition of Cu-Mn, highlighting the potential of the aqueous extract as a natural source of biocatalysts. Phytotoxicity assays using Solanum lycopersicum seeds confirmed a partial detoxification of the treated alperujo. However, none of the fungi could entirely eliminate inhibitory effects on their own, suggesting the need for complementary stabilization steps before agricultural reuse. Overall, the results indicate that S. hirsutum, especially when combined with metal supplementation, is better suited for valorizing alperujo through the recovery of bioactive compounds. Meanwhile, A. discolor may be more suitable for detoxifying the solid phase strategies. These findings support the integration of fungal pretreatment into biorefinery schemes that valorize agroindustrial residues while mitigating environmental issues. Full article

This study explores the sustainable valorization of Annurca apple by-products by examining the polyphenolic content and antioxidant activity of peel, flesh, and core at two ripening stages. Ripening significantly enhanced the concentration of bioactive compounds, particularly in the peel, where total polyphenols increased from 124.4 to 423.3 mg of CAE/100 g FW, flavonoids from 18.2 to 51.3 mg of quercetin equivalents, and ortho-diphenols from 11.9 to 36.1 mg of CAE. The flesh and core showed more moderate increases. Antioxidant activity, assessed using five in vitro assays (DPPH, ABTS, FRAP, TAC, and H₂O₂), was consistently highest in the peel, especially in the ABTS assay. Although the flesh had fewer phenolics, it showed a 1.5-fold increase during ripening, accompanied by improved antioxidant performance. The core also proved notable antioxidant potential, particularly in ripe samples. UHPLC-MS/MS analysis identified 11 phenolic compounds, showing tissue- and ripening-specific distribution. SDS-PAGE revealed a ripening-related increase in Thaumatin-like Protein 1a (TLP1a), especially in the core and flesh. Its association with tissues showing high antioxidant ability suggests a possible role in enhancing the bioactivity of polyphenol-rich extracts. From an agri-food waste valorization perspective, the peel and core represent promising sources of bioactive compounds for developing functional foods and nutraceuticals. Full article

Lactic acid (LA) is a high-value chemical with growing demand for the production of polymers and plastics and in the food and pharmaceutical industries. However, production costs remain a significant constraint when using conventional food-grade substrates. This study investigates Ivorian sugarcane molasses, an abundant agro-industrial by-product, as a low-cost carbon source for LA production via batch fermentation with Limosilactobacillus fermentum ATCC 9338. Molasses was pretreated by acid hydrolysis to improve fermentability, increasing glucose and fructose concentrations. Comparative fermentations using raw and pretreated molasses showed a 75% increase in LA production (32.4 ± 0.03 g/L) after pretreatment. Optimisation using Box–Behnken design revealed that the initial sugar concentration, inoculation rate, and stirring speed significantly influenced lactic acid production. Under optimal conditions, a maximum LA concentration of 52.4 ± 0.49 g/L was achieved with a yield of 0.95 g/g and productivity of 0.73 g/L·h. Kinetic analysis confirmed efficient sugar utilisation under the optimised conditions, and polarimetry revealed a near-racemic lactic acid. A simplified cost analysis showed that molasses could reduce carbon source costs by over 70% compared to refined sugars, supporting its economic viability. This work demonstrates the potential of pretreated molasses under robust fermentation conditions as a sustainable and cost-effective substrate for LA production in resource-limited contexts. The approach aligns with circular bioeconomy principles and presents a replicable model for decentralised bioproduction in a developing country like Côte d’Ivoire. Full article

The production of bio-based products for different purposes has become an increasingly common strategy over the last few decades, both in Europe and worldwide. This trend seeks to contribute to mitigating the impacts associated with climate change and to cope with the ambitious objectives established at European level. Over recent decades, agro-industries have shown significant potential as biomass suppliers, triggering the development of robust logistical supply chains and the valorization of by-products to obtain bio-based products that can be marketed at competitive prices. However, this transformation may, in some cases, involve restructuring traditional business model to incorporate the biorefinery concept. In this sense, the first step in developing a bio-based value chain involves assessing the resource’s availability and characterizing the feedstock to select the valorization pathway and the bio-application with the greatest potential. The paper incorporates inputs from a case study on PATURPAT, a company commercializing a wide range of ready-prepared potato products, which has commissioned a starch extraction facility to process the rejected pieces of potatoes and water from the process to obtain starch that can be further valorized for different bio-applications. This study aims to comprehensively review current trends and frameworks for potatoes processing agro-industries and define the most suitable bio-applications to target, as well as identify opportunities and challenges. Full article

This research analyzes the innovative development of carnauba wax coatings enriched with essential oils (EOs: lemon, orange, grapefruit, clove, oregano, and cinnamon) or fruit by-products (FBPs: avocado, tomato, carrot, orange, lemon, and grapefruit) to improve postharvest preservation of organic oranges and lemons. Six EOs and six FBPs were evaluated for total phenolic content (TPC) and in vitro antifungal activity against Penicillium digitatum. Based on results, grapefruit, oregano, and clove EOs were selected for lemons, while avocado, orange, and grapefruit FBPs were selected for oranges. An in vivo test at 20 °C for 15 days with carnauba wax coatings assessed antifungal performance. Clove EO and avocado FBP showed strong in vitro inhibition and consistent hyphal suppression (~100 and ~82%, respectively). In vivo, coatings with grapefruit EO and avocado FBP significantly reduced fungal decay and sporulation (~75%) in lemons and oranges, respectively. Coated fruits also retained weight losses by ~25% compared to uncoated ones. These findings suggest that phenolic-rich natural extracts, especially from agro-industrial residues like avocado peels, offer a promising and sustainable strategy for postharvest citrus disease control. Further studies should test coating effectiveness in large-scale trials under refrigeration combined with other preservation strategies. Full article

Agriculture and its related industries produce annually a vast amount of byproducts and waste which comprise a large proportion of global waste. Only a small percentage is managed with environmentally acceptable procedures, while a large proportion is either incinerated or discarded into nearby open fields, causing serious environmental burdens. Since these byproducts exhibit a rich nutritional and phytochemical content, they may be considered as raw materials for various industrial applications, initiating the need for the development of sustainable and eco-friendly methods for their valorization. Among the various methods considered, Solid-State Fermentation (SSF) constitutes an intriguing eco-friendly bioprocess, being suitable for water-insoluble mixtures and providing products with improved stability and depleted catabolic suppression. Thus, there are several literature studies highlighting the aspects and efficacy of SSF for improving the nutritional and phytochemical contents of diverse agro-industrial waste. The review herein aspires to summarize these literature results with a special focus on the enhancement of their antioxidant potency. For this purpose, specific keywords were used for searching multiple scientific databases with an emphasis on the most recent studies and higher impact journals. The presented data establish the usefulness and efficacy of the SSF bioprocess to obtain fermentation products with enhanced antioxidant profiles. Full article

The agro-industrial sector produces large amounts of by-products that have a high environmental impact, so it has become essential to recover food waste at all levels. This is because it often contains bioactive molecules that can be a valuable source of new products such as animal feed, biopolymers, or products for human use, (e.g., cosmetics and nutraceuticals) due to its antioxidant, antimicrobial, and anti-inflammatory properties. Advanced analytical methodologies such as liquid chromatography coupled to mass spectrometry (LC-MS) are crucial for the characterisation of bioactive chemicals in these waste materials. LC-MS enables both targeted and untargeted metabolomic approaches, facilitating the identification and quantification of a wide range of secondary metabolites, including polyphenols, flavonoids, alkaloids, and terpenoids. The choice of extraction methodology is essential for the precise identification and quantification of these metabolites. This study provides an overview of LC-MS as an effective tool for analysing complex extracts derived from plant waste, discussing both methodological aspects and typical bioactive metabolites identified, and offering examples of their potential applications in cosmeceutics. Full article