Search Results (194)

The development of effective materials for uranium extraction from seawater is vital for advancing sustainable energy solutions. However, the efficient recovery of uranium from seawater presents significant challenges due to its extremely low concentration, the presence of competing ions, and the complex marine environment. To address these issues, various materials such as inorganic and organic sorbents, chelating resins, nanostructured sorbents, and composite materials have been explored. More recently, the functionalization of carbon-based materials for enhanced adsorption properties has attracted much interest because of their high specific surface area, excellent chemical and thermal stability, and tunable porosity. These materials include activated carbon, graphene oxide, biochar, carbon cloths, carbon nanotubes, and carbon aerogels. The enhancement of carbonaceous materials is typically achieved through surface functionalization with chelating groups and the synthesis of composite materials that integrate other high-performance sorbents. This review aims to summarize the work of these functionalized carbon materials, focusing on their adsorption capacity, selectivity, and durability for uranium adsorption. This is followed by a discussion on the binding mechanisms of uranium with major chelating functional groups grafted on carbonaceous sorbents. Finally, an outlook for future research is suggested. We hope that this review will be helpful to researchers engaged in related studies. Full article

The transition to a sustainable energy mix is essential to mitigate climate change. Enhanced Oil Recovery (EOR) using low-salinity water (smart water) has emerged as a promising strategy for reducing environmental impacts in the petroleum industry, producing a highly valuable energy source due to both its energy density and market value. This study critically reviews intermediate technological readiness levels (TRL), applying a patent-based approach (TRL 4–5) and a review of articles (TRL 3) to analyze various aspects of smart water for EOR, including its composition. A total of 23 patents from the European Patent Office (Questel Orbit) and 1395 articles from Elsevier’s Scopus database were analyzed, considering annual trends, country distribution, international collaborations, author and applicant affiliations, citation dependencies, and factorial analyses. Both patents and articles show exponential growth; however, international collaboration is more frequent in the scientific literature, while patents remain concentrated in a few countries aligned with their markets. Technologies are focused on wettability, surface complexation, CO₂ interactions, emulsification, aerogels, reinjection water treatment, carbonate reservoirs, effluent treatment, nanofluidics, and ASP fluids. Recent topics include CO₂ associations, permeability, fractured reservoirs, gels, reservoir water, wettability alteration, and reservoir/oil heterogeneity. The findings indicate the need for multivariated development of customized smart waters to address complex interfacial synergistic mechanisms. International Joint Industry Projects and global regulations on the safe use and composition of hybrid injections are recommended to accelerate development, reduce environmental impacts, and enhance the efficient use of existing fields, alleviating the challenges of finding new reservoirs. Full article

New energy vehicles face a critical challenge in balancing the thermal safety management of high-specific-energy battery systems with the simultaneous improvement of energy density. With the large-scale application of high-energy-density systems such as silicon-based anodes and solid-state batteries, their inherent thermal runaway risks pose severe challenges to battery thermal management systems (BTMS). Currently, the thermal insulation performance, temperature resistance, and fire protection capabilities of flame-retardant materials (e.g., foam cotton, fiber felts) used in automotive batteries are inadequate to meet the demands of intense combustion and high temperatures generated during thermal failure in high-energy-density batteries. Against this backdrop, thermal insulation and fireproof aerogel materials are emerging as a revolutionary solution for the next generation of power battery thermal protection systems. Leveraging their nanoporous structure’s exceptional thermal insulation properties (thermal conductivity of 0.013–0.018 W/(m·K) at room temperature) and extreme fire resistance (temperature resistance > 1100 °C/UL94 V-0 flame retardancy), aerogels are gaining prominence. This article provides a systematic review of thermal runaway phenomena in automotive batteries and corresponding protective measures. It highlights recent breakthroughs in the selection of material systems, optimization of preparation processes, and fiber–matrix composite technologies for automotive fireproof aerogel composites. The core engineering values of these materials, such as blocking thermal runaway propagation, reducing system weight, and improving volumetric efficiency, are quantitatively validated. Furthermore, the paper explores future research directions, including the development of low-cost aerogel composites and the design of organic–inorganic hybrid composite structures, aiming to provide a foundation and industrial pathway for the research and development of next-generation high-performance battery thermal management systems. Full article

Polymer gel-based triboelectric nanogenerators (TENGs) have emerged as versatile platforms for self-powered sensing due to their inherent softness, stretchability, and tunable conductivity. This review comprehensively explores the roles of polymer gels in TENG architecture, including their function as triboelectric layers, electrodes, and conductive matrices. We analyze four operational modes—vertical contact-separation, lateral-sliding, single-electrode, and freestanding configurations—alongside key performance metrics. Recent studies have reported output voltages of up to 545 V, short-circuit currents of 48.7 μA, and power densities exceeding 120 mW/m², demonstrating the high efficiency of gel-based TENGs. Gel materials are classified by network structure (single-, double-, and multi-network), matrix composition (hydrogels, aerogels, and ionic gels), and dielectric medium. Strategies to enhance conductivity using ionic salts, conductive polymers, and nanomaterials are discussed in relation to triboelectric output and sensing sensitivity. Morphological features such as surface roughness, porosity, and micro/nano-patterning are examined for their impact on charge generation. Application-focused sections detail the integration of gel-based TENGs in health monitoring (e.g., sweat, glucose, respiratory, and tremor sensing), environmental sensing (e.g., humidity, fire, marine, and gas detection), and tactile interfaces (e.g., e-skin and wearable electronics). Finally, we address current challenges, including mechanical durability, dehydration, and system integration, and outline future directions involving self-healing gels, hybrid architectures, and AI-assisted sensing. This review expands the subject area by synthesizing recent advances and offering a strategic roadmap for developing intelligent, sustainable, and multifunctional TENG-based sensing technologies. Full article

Aerogels (AGs) are highly porous, low-density, disordered, ultralight macroscopic materials with immense surface areas. Traditionally synthesized using aqueous sol–gel chemistry, starting by molecular precursors, the nanoparticles (NPs) dispersions gelation method is nowadays the most used procedure to obtain AGs with improved crystallinity and broader structural, morphological and compositional complexity. The Sol–gel process consists of preparing a solution by hydrolysis of different precursors, followed by gelation, ageing and a drying phase, via supercritical, freeze-drying or ambient evaporation. AGs can be classified based on various factors, such as appearance, synthetic methods, chemical origin, drying methods, microstructure, etc. Due to their nonpareil characteristics, AGs are completely different from common NPs, thus covering different and more extensive applications. AGs can be applied in supercapacitors, acoustic devices, drug delivery, thermal insulation, catalysis, electrocatalysis, gas absorption, gas separation, organic and inorganic xenobiotics removal from water and air and radionucleotides management. This review provides first an analysis on AGs according to data found in CAS Content Collection. Then, an AGs’ classification based on the chemical origin of their precursors, as well as the different methods existing to prepare AGs and the current optimization strategies are discussed. Following, focusing on AGs of inorganic origin, silica and metal oxide-based AGs are reviewed, deeply discussing their properties, specific synthesis and possible uses. These classes were chosen based on the evidence that they are the most experimented, patented and marketed AGs. Several related case studies are reported, some of which have been presented in reader-friendly tables and discussed. Full article

To meet the massive increase in energy demand, extensive research has been conducted over the past few decades on developing clean and sustainable energy storage methods. Hydrogen is considered as one of the most promising future energy carriers due to its high energy density and renewability, but it requires storage. Storing hydrogen using metal hydride offers several advantages, including stability, safety compactness and reversibility of the hydrogen absorption/desorption process. Thermal management during hydrogen storage using metal hydride is critically important since the reaction between the metal and hydrogen is highly exothermic. We are aiming to develop thermal storage systems based on composite phase change materials (CPCMs) that absorb the heat generated during hydrogen absorption and release it during desorption, in an effort to improve energy storage efficiency. Lightweight, shape-stable CPCMs are prepared by loading the selected organic phase change materials into expanded graphite and hydrophobic monolithic silica aerogel. The chemical structure, microstructure, thermal properties and leakage of CPCMs are investigated. These samples were subjected to variable power electrical heating to simulate the heat generated during hydrogen reaction, forming lanthanum hydride, according to its published reaction kinetics. Full article

As an emerging thermal insulation material, silica aerogel holds broad application prospects in building energy conservation. Silica aerogel based waterborne coatings are low thermal conductivity, readily applicable and environmentally friendly, offering significant advantages for improving building energy efficiency. However, the inadequate dispersibility and agglomeration tendency of silica aerogel in aqueous polymer systems adversely affect coating properties. To address this challenge, a waterborne polyurethane (WPU) coating incorporating 3-aminopropyltriethoxysilane-modified organo-bridged silica aerogel (APTES-OBSA) was developed. Integration of organic segments within organo-bridged silica aerogel (OBSA) framework enhanced compatibility of silica aerogel with organic polyurethane chains, thereby reducing aerogel agglomeration. 3-aminopropyltriethoxysilane (APTES) surface modification of OBSA introduced amino groups that strengthened interfacial interaction between OBSA-WPU, effectively enhancing aerogel dispersion within the aqueous polyurethane matrix. APTES-OBSA loading achieved 20 wt% in WPU composite coatings. Compared to neat WPU coating, the composite coatings achieved 21.6% reduction in thermal conductivity, 10 °C lower temperature under thermal irradiation, and 26.6% higher adhesion. Additionally, the composite coatings demonstrated enhanced thermal stability and good water resistance. The excellent comprehensive performance positions this material as a promising eco-friendly thermal insulation coating for building energy-saving applications. Full article

The safe and efficient capture of CO₂ in confined environments such as coal mine goafs remains a significant challenge, posing both environmental and safety risks. To address this issue, this study developed a novel biomass-based aerogel adsorbent using CNF-C and CS through sol–gel synthesis and freeze-drying. A series of composite aerogels with varying mass ratios were systematically characterized by SEM, BET, FTIR, and TG-DSC to analyze their microstructure, specific surface area, pore characteristics, chemical properties, and thermal stability. A constant temperature and humidity experimental setup was specially designed to explore the effects of various temperatures, humidity, and material ratios on CO₂ adsorption performance. FTIR analysis confirmed that -NH₂ served as the primary adsorption site, with its density increasing with higher chitosan content. The 1:3 ratio exhibited the optimal specific surface area (7.05 m²/g) and thermal stability, withstanding temperatures up to 350.0 °C, while the 1:1 ratio demonstrated the highest porosity (80.74%). Adsorption experiments indicated that 35.0 °C and 50% humidity were the optimal conditions, under which the 1:2 ratio biomass aerogel achieved an 18% increase in CO₂ adsorption capacity compared to room temperature. The sample with a 1:1 high cellulose ratio is primarily dominated by physical adsorption, making its performance susceptible to environmental fluctuations. The sample with a 1:3 high chitosan ratio is predominantly governed by chemical adsorption, exhibiting more stable adsorption characteristics. The 1:2 ratio achieved the best balance under 35.0 °C and 50% humidity. The biomass aerogel synergistically combined physical barriers from its three-dimensional network structure and chemical adsorption via active functional groups, enabling efficient CO₂ capture and stable sequestration. This study demonstrates the feasibility of biomass-derived aerogels for CO₂ adsorption under complex conditions and provides new insights into the design of sustainable materials for environmental remediation and carbon reduction applications. Full article

Graphitic carbon nitride (g-C₃N₄)-based materials hold significant promise for environmental remediation, particularly water purification, owing to their unique electronic structure, metal-free composition, and robust chemical stability. However, powdered g-C₃N₄ faces challenges such as particle aggregation, poor recyclability, and limited exposure of active sites. Structuring g-C₃N₄ into hydrogels or aerogels—three-dimensional porous networks offering high surface area, rapid mass transport, and tunable porosity—represents a transformative solution. This review comprehensively examines recent advances in g-C₃N₄-based gels, covering synthesis strategies such as crosslinking (physical/chemical), in situ polymerization, and the sol–gel and template method. Modification approaches including chemical composition and structural engineering are systematically categorized to elucidate their roles in optimizing catalytic activity, stability, and multifunctionality. Special emphasis is placed on environmental applications, including the removal of emerging contaminants and heavy metal ions, as well as solar-driven interfacial evaporation for desalination. Throughout, the critical interplay between gel structure/composition and performance is evaluated to establish design principles for next-generation materials. Finally, this review identifies current challenges regarding scalable synthesis, long-term stability, in-depth mechanistic understanding, and performance in complex real wastewater matrices. This work aims to provide valuable insights and guidance for advancing g-C₃N₄-based hydrogel and aerogel technologies in environmental applications. Full article

The United States produces approximately 500 million tons of asphalt mixtures annually, while generating vast amounts of waste materials that could be repurposed for sustainable infrastructure. Each year, 1.4 billion gallons of lubricating oils are available for reuse and recycling. Additionally, 280 million tires are discarded, contributing to significant environmental challenges. Given the critical role of the roadway network in economic growth, mobility, and infrastructure sustainability, there is a pressing need for innovative material solutions that integrate recycled materials without compromising performance. This study introduces a Rubberized-Aerogel Composite (RaC), a novel asphalt binder modifier combining crumb rubber, recycled oil, and a silica-based aerogel to enhance the sustainability and durability of asphalt pavements. The research methodology involved blending the RaC with the PG70-10 asphalt binder at a 5:1 ratio and conducting comprehensive laboratory tests on binders and mixtures, including rheology, thermal conductivity (TC), specific heat capacity (Cp), the Hamburg Wheel-Tracking Test (HWTT), and indirect tensile strength (IDT). Pavement performance was simulated using AASHTOWare Pavement ME under hot and cold climates with thin and thick pavement structures. Results showed that RaC-modified binders reduced thermal conductivity by up to 30% and increased specific heat capacity by 15%, improving thermal stability. RaC mixtures exhibited a 50% reduction in rut depth in the HWTT and lower thermal expansion/contraction coefficients. Pavement ME simulations predicted up to 40% less permanent deformation and 60% reduced thermal cracking for RaC mixtures compared to the controls. RaC enhances pavement lifespan, reduces maintenance costs, and promotes environmental sustainability by repurposing waste materials, offering a scalable solution for resilient infrastructure. Full article

The development of stable and efficient heterogeneous Fenton oxidation for organic pollutant degradation is crucial to avoid iron sludge formation and cumbersome filtration processes. In this study, iron oxide/carbon aerogel was prepared via the sol–gel method, freeze-drying, and high-temperature carbonization using iron nitrate heptahydrate, ammonium hydroxide, and cellulose as raw materials, with polyvinylimine serving as the crosslinking agent. To enhance the pH adaptability of the catalyst, copper and cerium elements were introduced. The characterization results demonstrate the iron (III) oxide within the carbon aerogel, achieving phenol degradation efficiency exceeding 95% within 120 min. Meanwhile, the introduction of copper and cerium accelerated the degradation of phenol while maintaining a certain catalytic degradation effect at pH 5-7. In addition, the catalyst exhibited excellent recyclability, retaining 85% of its initial degradation efficiency after five reaction cycles. This work offers a new method for the development of heterogeneous Fenton catalysts. Full article

Infection control and bleeding management in deep wounds remain urgent and unmet clinical challenges that demand innovative, multifunctional, and sustainable solutions. Unlike previously reported sodium alginate and silk fibroin-based gel formulations, the present work introduces a dual-functional system combining antimicrobial and haemostatic activity in the form of conformable aerogel beads. This dual-functional formulation is designed to absorb exudate, promote clotting, and provide localized antimicrobial action, all essential for accelerating wound repair in high-risk scenarios within a single biocompatible system. Aerogel beads were obtained by supercritical drying of a silk fibroin–sodium alginate blend, resulting in highly porous, spherical structures measuring 3–4 mm in diameter. The formulations demonstrated efficient ciprofloxacin encapsulation (42.75–49.05%) and sustained drug release for up to 12 h. Fluid absorption reached up to four times their weight in simulated wound fluid and was accompanied by significantly enhanced blood clotting, outperforming a commercial haemostatic dressing. These findings highlight the potential of silk-based aerogel beads as a multifunctional wound healing platform that combines localized antimicrobial delivery, efficient fluid and exudate management, biodegradability, and superior haemostatic performance in a single formulation. This work also shows for the first time how the prilling encapsulation technique with supercritical drying is able to successfully produce silk fibroin and sodium alginate composite aerogel beads. Full article

To meet the European Green Deal targets, the construction sector must improve building thermal performance via advanced insulation systems. Eco-friendly sandwich panels offer a promising solution. Therefore, this work aims to develop and validate a new eco-friendly composite sandwich panel (basalt fibres and recycled extruded polystyrene) with enhanced multifunctionality for lightweight and energy-efficient building façades. Two panels were produced via vacuum infusion—a reference panel and a multifunctional panel incorporating phase change materials (PCMs) and silica aerogels (AGs). Their performance was evaluated through lab-based thermal and acoustic tests, numerical simulations, and on-site monitoring in a living laboratory. The test results from all methods were consistent. The PCM-AG panel showed 16% lower periodic thermal transmittance (0.16 W/(m²K) vs. 0.19 W/(m²K)) and a 92% longer time shift (4.26 h vs. 2.22 h), indicating improved thermal inertia. It also achieved a single-number sound insulation rating of 38 dB. These findings confirm the panel’s potential to reduce operational energy demand and support long-term climate goals. Full article

Aerogel sponges of bio-based polymers loaded with metal–organic frameworks (MOFs) are highly promising for environmental applications, but a central challenge is to improve their stability and efficiency for removal processes. Here, the effective incorporation of the MOFs MIL-100(Fe) and ZIF-8 in composite aerogels of chitosan–pectin–lactic acid is reported. The presence of pectin was critical to loading the MOFs efficiently and homogeneously, while the incorporation of lactic acid induced a large increase in the Young’s modulus and provided structural preservation in aqueous solutions. The presence of MOFs enhanced the removal of two dyes, methyl orange (MO) and methylene blue (MB), under batch and flow conditions, with removal efficiencies of methyl orange of about 85% and 90% when loaded with ZIF-8 and MIL-100(Fe), respectively. Bentonite, celite 545, and two ionenes were loaded for comparison. Factors beyond charge-to-charge electrostatic interactions influenced the removal, since no correlations were obtained between the electrical charges of dyes, fillers, and polymers. The kinetic data were analyzed by adapting the Langmuir kinetic model, incorporating absorption and desorption processes, which allowed the recovery of the respective rate constants. Full article

Amidst global imperatives for sustainable energy and environmental remediation, carbon aerogels (CAs) present a transformative alternative to conventional carbon materials (e.g., activated carbon, carbon fibers), overcoming limitations of disordered pore structures, unmodifiable surface chemistry, and functional inflexibility. This review systematically examines CA-based electrochemical systems as its primary focus, analyzing fundamental charge-storage mechanisms and establishing structure–property–application relationships critical to energy storage performance. We critically assess synthesis methodologies, emphasizing how stage-specific parameters govern structural/functional traits, and detail multifunctional modification strategies (e.g., heteroatom doping, composite engineering) that enhance electrochemical behavior through pore architecture optimization, surface chemistry tuning, and charge-transfer kinetics acceleration. Electrochemical applications are extensively explored, including the following: 1. Energy storage: supercapacitors (dual EDLC/pseudocapacitive mechanisms) and battery hybrids. 2. Electrocatalysis: HER, OER, ORR, and CO₂ reduction reaction (CO₂RR). 3. Electrochemical processing: capacitive deionization (CDI) and electrosorption. Beyond this core scope, we briefly acknowledge CA versatility in ancillary domains: environmental remediation (heavy metal removal, oil/water separation), flame retardancy, microwave absorption, and CO₂ capture. Full article