Search Results (127)

Accurate identification of acid-producing layers is key to controlling acid mine drainage (AMD) in abandoned coal mines. This study collected 337 core samples from 34 boreholes in the Modigou mining area, Shanxi, China, and established a combined static–mineralogical–kinetic approach to evaluate the acid-generating and neutralization potentials of sulfur-bearing rocks. Three-stage net acid generation (NAG) tests identified the pyrite-bearing layer of the Benxi Formation and the No. 10 coal seam of the Taiyuan Formation as the main acid producers, with NAG values of 360.41 and 97.87 kg H₂SO₄/t, respectively, while the Taiyuan limestone showed a high neutralization capacity (ANC = 490 kg H₂SO₄/t). NAG pH was strongly negatively correlated with sulfur content (Pearson r = −0.75, p < 0.01). Sulfide oxidation acid production showed staged attenuation, with average decreases of 64.81% and 47.65% in the second and third stages. Humidity cell experiments demonstrated continuous acid production over 63 days under dry–wet cycles, with increased acid generation rates at higher flow velocities (Darcy flux: 3.54 × 10⁻³ cm/s for accelerated vs. 8.84 × 10⁻⁴ cm/s for standard conditions). Multi-dimensional flow-through simulations confirmed the AMD formation mechanism of “acid supply, buffer, and fracture conduction”. The identified acid-producing layers matched well with field discharge points. This multi-method coupling system provides a theoretical basis for source control of AMD in abandoned high-sulfur coal mines in the Yellow River Basin. This study did not account for microbial catalysis, which is a key limitation of the static chemical oxidation method used. Full article

The environmental impacts of treated acid mine drainage on receiving river systems remain insufficiently understood. This study investigated four typical closed coal mines in northern Sichuan Province, China, by analyzing heavy metals, sulfate, pH, UV-Vis spectroscopy, and dissolved organic matter (DOM) characteristics at 24 sampling sites along the receiving reaches. Parallel factor analysis (PARAFAC) and two-dimensional correlation spectroscopy (2D-COS) were employed to examine the longitudinal response sequence of DOM components. Results showed that pollutant concentrations generally increased immediately after the inflow of treated acid mine drainage and then progressively attenuated downstream, although the dominant pollution factors varied significantly among the reaches. DOM composition exhibited spatial heterogeneity, with protein-like components dominating three reaches and humic-like components prevailing in one reach. Based on the co-variation characteristics of DOM and heavy metals along the river course, four response patterns were identified: rapid-recovery, slow-recovery, disturbance–oscillation recovery, and delayed-recovery patterns. The 2D-COS analysis validated the rationality of these four patterns and revealed differences in the sensitivity of various DOM components to longitudinal disturbances. This study provides a scientific basis for the environmental impact assessment of mine water from remediated closed coal mines. Full article

The successful realization of a circular economy in the cement industry, coupled with a substantial reduction in carbon emissions, relies on the development of sustainable alternative binder systems. This study investigated the physicomechanical performance and sulfate resistance of composites produced by alkali activation of natural perlite and blast furnace slag. The aim of the research was to improve mechanical properties under low- and medium-alkalinity conditions (5–10 M NaOH). The samples were cured at an ambient temperature of 20 °C and then treated with heat at 60 °C. These samples were then mechanically processed and subjected to five soak–dry cycles in 5% and 10% Na₂SO₄ solutions. The results showed that heat treatment resulted in the formation of a dense C-A-S-H gel, increasing compressive strength approximately eightfold, from 11.64 MPa to 92 MPa. However, perlite’s porous and brittle structure limits its flexural strength to 0.27 MPa; this value is insufficient for structural applications. Under severe sulfate attack (10% Na₂SO₄), samples cured at ambient temperature showed a 12% mass increase in the first cycle due to solution infiltration into capillary voids. As a consequence of extensive ettringite and gypsum formation, the specimens experienced severe deterioration, resulting in a complete loss of mechanical integrity and a residual compressive strength of 0 MPa. In contrast, heat-treated samples showed limited ion diffusion due to a denser matrix and an improved aggregate interface transition zone, resulting in a 2.6% mass increase and a residual compressive strength of 5.17 MPa. Consequently, the obtained findings indicate that thermally treated alkali-activated slag–perlite composites exhibit high resistance against sodium sulfate attack and may have potential for use in specific industrial environments with high sulfate concentrations. However, the performance of these materials under more complex aggressive conditions, such as mining environments involving magnesium sulfate exposure and acidic drainage waters, should be further validated through future studies. Full article

Schwertmannite (Sch) is a widespread iron oxyhydroxysulfate mineral in acid mine drainage (AMD) systems, and its transformation strongly influences the environmental fate of chromium (Cr). However, the role of Ca(II), which is commonly introduced during alkaline neutralization of AMD, in regulating the transformation of Cr(VI)-adsorbed schwertmannite (Cr-Sch) and subsequent Cr redistribution remains insufficiently understood. In this study, transformation experiments were conducted under various pH conditions (3.0, 7.0, and 10.0) to investigate the effects of Ca(II) speciation on mineral transformation and Cr behavior. The results demonstrated that the transformation of Cr-Sch was predominantly pH-dependent. Under acidic conditions, Cr-Sch transformed into goethite via dissolution–recrystallization, resulting in transient Cr release followed by partial refixation. The presence of Ca(II) exerted only a minor influence due to weak interactions between Ca²⁺ and positively charged mineral surfaces. Under alkaline conditions, Cr-Sch preferentially transformed into hematite through dehydroxylation and cation rearrangement, leading to the sustained release of adsorbed Cr(VI). In contrast, Ca(II) predominantly precipitated as CaCO₃ precipitate (calcite, aragonite, and vaterite) under alkaline conditions, which coated mineral surfaces and inhibited phase transformation and Cr release. These findings reveal that Ca(II) regulates Cr redistribution primarily through pH-dependent speciation and mineral–surface interactions, highlighting coupled geochemical processes governing iron mineral transformation and contaminant mobility in AMD environments. This study provides mechanistic insights for predicting Cr behavior and optimizing alkaline remediation strategies in mining-impacted systems. Full article

Gold mining in South Africa’s Witwatersrand Basin represents a critical case study of mining-induced environmental degradation affecting interconnected ecological and human systems. While the cascading effects of acid mine drainage (AMD), originating from a legacy of approximately 270 tailings dams containing 6 billion tons of FeS₂ waste and 600,000 tons of residual uranium, are widely documented, this evidence often remains fragmented. This study applies a systematic, framework-based analytical approach that integrates multidisciplinary evidence from geochemical, ecological, agricultural, and public health research within a One Health/EcoHealth perspective. Qualitative field observations are used to contextualize and validate the analytical synthesis along the water–soil–food–human continuum. A four-pathway conceptual model, including environmental dispersion, biotic uptake, trophic transfer, and direct human exposure, is developed to structure and interpret the integrated findings. The results demonstrate that mining-derived contaminants propagate through interconnected pathways, leading to persistent contamination of water resources, agricultural systems, and human communities, particularly within the Wonderfonteinspruit watershed. Evidence synthesized across pathways reveals extreme bioaccumulation and exposure levels and elevated uranium levels in the hair of local children. The study concludes that the impacts of acid mine drainage constitute a systemic socio-ecological failure driven by cumulative and interacting exposure pathways that cannot be effectively addressed through sectoral or single-medium interventions. The principal contribution of this research is the development of an operational, transferable framework that enables integrated risk assessment and supports evidence-based management and remediation strategies in post-mining landscapes. Full article

Acid mine drainage (AMD) and acid-generating mine wastes exhibit low pH, high sulfate levels, and complex multi-metal loads that strain conventional treatment. Thermoacidophilic red algae of the order Cyanidiales, particularly Galdieria sulphuraria (G. sulphuraria), have attracted interest as a biological option because they tolerate extreme acidity and elevated temperatures, grow under low light in mixotrophic or heterotrophic modes, and display rapid metal binding at the cell surface. This review synthesizes about two decades of peer-reviewed work to clarify how G. sulphuraria can be deployed as a practical module within mine water treatment trains. We examine the mechanisms of biosorption and bioaccumulation and show how they map onto two distinct configurations. Processed freeze-dried biomass functions as a regenerable sorbent for rare earth elements (REEs) and selected transition metals in packed beds with acid elution for recovery. Living cultures serve as polishing units for divalent metals and, when present, nutrients or dissolved organics under low light. We define realistic operating windows centered on pH 2–5 and temperatures of approximately 25–45 °C, and we identify matrix effects that govern success, including competition from ferric iron and aluminum, turbidity and fouling risks, ionic strength from sulfate, and suppression of REE uptake by phosphate in living systems. Building on laboratory studies, industrial leachate tests, and ecosystem observations, we propose placing G. sulphuraria upstream of bulk neutralization and outline reporting practices that enable cross-site comparison. The goal is an actionable framework that reduces reagent use and sludge generation while enabling metal capture and potential recovery of valuable metals from mine-influenced waters. Full article

The microbial ecology of acid mine drainage (AMD) systems in Armenia, with a long mining history, remains unexplored. This study aimed to characterize the microbial diversity and functional potential of AMD in the Syunik region and to isolate novel microorganisms with biotechnological value. A comprehensive analysis of the microbial communities’ structure of Kavart abandoned, Kapan exploring mines effluent, and Artsvanik tailing was conducted. Metagenomics revealed bacterial-dominated communities, comprising Pseudomonadota (previously “Proteobacteria”) (68–72%), with site-specific variations in genus abundance. A high abundance and diversity of metal resistance genes (MRGs), particularly for copper and arsenic, were identified. Carbohydrate-active enzyme (CAZy) analysis showed a dominance of GT2 and GT4 genes, suggesting a high potential for extracellular polymeric substances (EPS) production and biofilm formation. A novel strain of iron-oxidizing bacteria Arm-12 was isolated that shares only ~90% similarity with known Leptospirillum type species, indicating it may represent a new genus without culturable representatives. The strain exhibits enhanced copper extraction from concentrate. This study provides the first metagenomic insights into Armenian AMD systems and tailing, revealing a unique community rich in metal resistance and biofilm-forming genes. The isolation of a novel highly effective iron-oxidizer Arm-12 highlights the potential of AMD environments as a source of novel taxa with significant applications in biomining and bioremediation processes. Full article

Some mining sites generate acid mine drainage (AMD)—a highly acidic, metal-rich waste stream that affects bodies of water. Passive treatment systems are widely being adapted, particularly for abandoned or closed mines, due to their cost-effectiveness and lower environmental impact. However, novel strategies and approaches still need to be developed, especially in their implementation. Through batch experiments, this study identifies the effective sequence of three locally available treatment media, namely limestone (LS), steel slag (SS), and activated carbon (AC), using various water quality and pollution indices (WQPIs). The performance of the sequences was assessed based on their ability to improve various in situ parameters (pH, oxidation–reduction potential (ORP), dissolved oxygen (DO), and electrical conductivity (EC)) and their efficiency in removing Fe, Mn, Cu, and SO₄²⁻. Six sequences of media were identified and ranked by calculating a score based on comparisons with the Philippine General Effluent Standard (GES) by normalization and specific WQPIs for AMD and AMD-impacted waters, such as the CCMEWQI, MAMDI, and WPI-AMD. Analysis showed that the sequence of LS-AC-SS and SS-LS-AC yielded the highest removal for heavy metals (98.78% for Fe and Mn and 89.92% for Cu). However, limited removal of SO₄²⁻ was observed (14.96%), which suggests that additional treatment beyond the materials explored must be considered. Considering all the parameters and assessing them through normalization and WQPIs, the sequence of SS-LS-AC achieved the overall best treatment performance. Differences were observed in the ranking between the methods, with WQPIs successfully capturing actual water quality, demonstrating its robustness as an assessment tool. This study shows that the treatment media sequence is a factor in treating AMD, specifically utilizing AC, SS, and LS. Full article

N-tetradecanoyl-L-homoserine lactone (C₁₄-HSL) is a long-chain signaling molecule belonging to acyl-homoserine lactones (AHLs), which is widely present in the quorum sensing (QS) system of Gram-negative bacteria. In this study, the effects of C₁₄-HSL on chalcopyrite bioleaching mediated by Acidithiobacillus ferrooxidans (A. ferrooxidans) were investigated. After cultivating A. ferrooxidans with different energy substrates and exploring the potential mechanisms of signal molecule production, chalcopyrite was selected as the energy substrate for further study. Molecular docking analysis revealed that the high binding affinity between AHL and the receptor protein AfeR in A. ferrooxidans was beneficial for the activation of transcription by the AfeR-AHL complex, promoting their biological impact. The variations in the physicochemical parameters of pH, redox potential, and copper ions revealed that after adding C₁₄-HSL, the leaching rate of chalcopyrite increased (1.15 times during the initial 12 days). Further analysis of the mechanism of extracellular polymers formation indicated that the presence of C₁₄-HSL could promote the formation of biofilms and the adhesion of bacteria, facilitating mineral leaching rate of A. ferrooxidans. This research provides a theoretical basis for regulating the biological leaching process of chalcopyrite and metal recovery using signaling molecules, which could also be used to control environmental damage caused by acid mine/rock drainage. Full article

Acid mine drainage (AMD), characterized by low pH and high sulfate concentrations, poses severe environmental risks. Sulfate-reducing bacteria (SRB) are promising for AMD bioremediation, but their activity is often inhibited in such extreme conditions. This study proposed two strategies—SRB pre-cultivation and SRB-enhanced sediment amendment—to address this limitation, and systematically examined the effects of sulfate concentration, pH, inoculum size, and carbon source on sulfate removal. Results showed that pre-cultivation significantly improved SRB’s acid tolerance, expanding the effective AMD treatment pH range from 6.8–8.8 to 4.8–8.8. At pH 7.8, pre-cultivated SRB achieved 50% removal of 11,760 mg/L sulfate within 24 h and complete removal within 150 h. The SRB-enhanced sediment system further enabled efficient and stable remediation of real AMD (sulfate removal > 97%, Fe/Mn co-removal > 90%). This work provides a practical solution to overcome SRB inhibition in harsh AMD environments and contributes to the development of low-cost, sustainable AMD bioremediation technologies. Full article

This research utilizes a modified cellulose nanocrystal composite as an adsorbent to remove cadmium (II) through a column study. A fixed-bed column was used to remove cadmium (II) at room temperature using varying process factors, such as pH (4–8), bed height (3–9 cm), flow rate (3–7 mL/min), and concentration (10–20 mg/L). According to these findings, cadmium (II) breakthrough occurred more quickly at lower bed heights, higher flow rates, and higher cadmium (II) concentrations. The Thomas model is the most appropriate kinetic model. Deep learning models, such as the adaptive neuro-fuzzy inference model with two algorithms (backpropagation and least squares estimation), were effectively used to model the effectiveness of cadmium (II) removal in aqueous solutions via modified cellulose nanocrystals. To compare the model’s predicted results with experimental data, statistical approaches were employed, including calculating the coefficient of determination (R²) and mean square error (MSE). The ANFIS model used to predict cadmium (II) adsorption via modified cellulose nanocrystals had a strong correlation value of 0.997 for least squares estimation (LSE) and 0.999 for the gradient descent (backpropagation) method, indicating the effectiveness of the trained model in predicting the cadmium (II) adsorption process. Full article

The Água Forte (AF) stream located in the Southern Alentejo region (Portugal), is a tributary of the Roxo river. The AF stream has acid mining drainage (AMD) traits, which contributes to the degradation of the river’s water quality and the adjacent soils. The use of ecological floating beds (EFBs) is an eco-rehabilitation strategy for polluted waters. This work aimed to evaluate the application of EFBs at real-scale as a water treatment system for the AF stream. Thus, three EFB, planted with Vetiveria zizanioides (3.3 m²·unit⁻¹; density 40.5 plants·m⁻²), were placed on the stream. The water quality was monitored monthly, upstream (Inlet) and downstream (Outlet) of EFBs, from May 2020 to November 2021. With the use of the EFBs, the pH remained acidic, and the other main parameters showed average removal rates of around: 8% organic matter; 7% sulphates; 4% chlorides; 18% nitrogen, 30% copper, 29% zinc, 53% iron, and 10% manganese. Inlet and Outlet mass loads correlations showed high removal diversity. For the parameters under analysis, during the treatment period, the removal efficiency showed high variability due to the hydraulic conditions. The higher removal efficiencies were obtained for low-hydraulic retention times, except for heavy metals. Overall, EFBs showed some potential, but their efficiency was variable, highlighting the need for optimization under variable hydraulic conditions. Full article

With the weathering of iron sulfide minerals, acid rock drainage (ARD) emanates from the 60-millon tonne Main Waste Stockpile (MWS) at the Red Dog Mine. Following completion of the stockpile, a collection trench was constructed in 2012–2013 to capture and treat a portion of the ARD, and a cover system was emplaced from 2021 to 2025 to cover 90% of the stockpile. Select wells in the collection trench are associated with the different cover phases. Analysis of the water chemistry of samples collected at the wells indicates increased pH and decreased dissolved solids with each phase of the cover along with significant changes in flow and solutes such as aluminum, iron, sulfate, and zinc. Although the cover should continue to decrease ARD volume, acidity, and solute concentrations, an evaluation of historical acid production and iron sulfide consumption in the stockpile indicates a likely majority of the iron sulfide content remains available for weathering and acid production. Continued MWS ARD monitoring is necessary to evaluate the multi-year effect of the cover because of the variability of the pre-cover ARD, identification of seasonal and multi-year precipitation influences on ARD generation, and a yet to be determined influence of the cover on the volume of infiltrating precipitation. Full article

Acid mine drainage (AMD) environments feature extreme acidity (pH ≤ 2) and high heavy metal concentrations. Acidophiles survive these conditions through unique genetic adaptations and secondary metabolite (SM) pathways. Leptospirillum ferriphilum, known for its acid and heavy metal resistance, serves as a model for AMD bioremediation, though systematic multi-omics studies on its key SMs and biosynthesis pathways remain underexplored. In this study, L. ferriphilum YR01 was isolated and identified from the AMD of the Zijinshan copper mine, China. Pangenomic analysis revealed that YR01 possesses the largest number of genes (2623) among the eight sequenced L. ferriphilum strains. Comparative genomics, antiSMASH, BiG-SCAPE, and metabolomic analyses (LC-MS and HPLC-MS) were integrated to comprehensively explore its biosynthetic capacity. A total of 39 biosynthetic gene clusters (BGCs) were identified, of which 60% shared <50% similarity with known clusters, indicating substantial novel biosynthetic potential. The sequence alignment of SM biosynthetic gene clusters (BGCs) demonstrated the potential of L. ferriphilum to synthesize conserved clusters for ectoine, choline, carotenoids, terpenoids, and terpene precursors. YR01 harbors complete BGCs for all five SM types. Notably, key nonribosomal peptide synthetase (NRPS) modules implicated in N-acyl homoserine lactone (AHL) synthesis were identified. Untargeted metabolomics (LC-MS) revealed the production of diverse SMs (18 types) putatively involved in environmental adaptation, including phosphocholine, carotenoids (e.g., anteraxanthin), cholera autoinducer-1 (CAI-1), and multiple AHLs. Targeted detection (HPLC-MS) further confirmed that YR01 could produce ectoine (0.10 ng/mL) and specific AHLs (C₁₄-HSL, C₁₂-HSL, C₁₂-OH-HSL), which were beneficial for the survival of the strain in extremely acidic environments and interspecies communication through SMs. This study represents the first comprehensive multi-omics characterization of BGCs in L. ferriphilum and experimentally validates the production of key SMs. Collectively, this study provides a comprehensive elucidation of the SM biosynthetic repertoire and environmental adaptation strategies in L. ferriphilum, advancing our understanding of microbial adaptation and interspecies communication in AMD systems, and offering potential implications for biomining applications. Full article

Despite South Africa’s robust environmental legislation governing the mining industry, abandoned coal mines persist as a significant environmental concern, largely due to some companies evading accountability. This study assesses the level of contamination at an abandoned coal mine site in Mpumalanga, South Africa, and proposes preliminary remediation strategies and potential site repurposing options. The analysis included measuring parameters such as pH, electrical conductivity (EC), sulphates (SO₄), calcium (Ca), iron (Fe), manganese (Mn), magnesium (Mg), and lead (Pb) in both soil and water samples. Additionally, soil samples were analyzed for ammonia (NH₃), while water samples were analyzed to determine total suspended solids (TSSs) and total dissolved solids (TDSs). The results revealed that soil samples exceeded prescribed thresholds for SO₄ and Pb, according to Soil Screening Values 1 (SSV1) for protection of land and resources. Water samples also showed exceedances for several parameters, except for Mg and Pb, as per South African National Standards and guidelines. Water quality assessment using the Canadian Council of Ministers of the Environment Water Quality Index (CCME-WQI) yielded scores of 43.33 and 15.56, indicating poor quality for livestock watering and unsuitability for domestic use, respectively. These results suggest threatened water conditions, highlighting significant implications for human health and ecosystem. The study recommends a circular economy-driven approach to environmental remediation, where acid mine drainage is treated using passive systems like constructed wetlands, and phytomining is used to extract valuable metals or minerals. Invasive alien species are harvested and converted into compost, reducing waste and promoting sustainable land use. This approach not only restores the site but also generates economic opportunities through resource recovery, paving the way for sustainable post-mining land uses. Full article