Search Results (14)

Lubricating oil plays a critical role in protecting mechanical systems. Driven by sustainable development strategies, the development of high-performance, biocompatible green lubricants has become an urgent industry need. Biomass resources, characterized by wide distribution, renewability, and environmental friendliness, represent ideal raw materials for replacing petrochemical-based lubricants. In this study, renewable Xanthoceras sorbifolia oil was utilized as the feedstock. Branched modification was achieved via ring-opening esterification using 2-ethylhexanol (2-EH) as the modifier and tetrafluoroboric acid (HBF₄) as the catalyst. This epoxidation-branching modification process was synergistically combined with Nano-C₁₄MA/MMT treatment. This approach significantly reduced high-temperature kinematic viscosity loss while maintaining excellent low-temperature flow properties, resulting in an Xanthoceras sorbifolia oil-based lubricant with outstanding viscosity–temperature performance and low-temperature fluidity. At a Nano-C₁₄MA/MMT mass ratio of 0.3 wt% of the base oil, the lubricant demonstrated superior wide-temperature performance: KV₄₀ = 424.1 mm²/s, KV₁₀₀ = 50.8 mm²/s, VI = 180.8. The SP was reduced to −43 °C, exceeding the performance requirements of V-class environmentally friendly lubricants (e.g., synthetic ester oils). Furthermore, the coefficient of friction (COF) was 0.011 and the anti-wear scar diameter (AWSD) was 0.44 mm, indicating lubrication performance significantly superior to SN-class lubricants (specifications: COF < 0.12, AWSD < 0.50 mm). Full article

The swift exhaustion of natural oil reserves and worsening environmental issues have prompted the quest for an economical method to produce biofuels. The superiority of heterogeneous catalysis promotes the development of bio-based catalysts. Carbon materials prepared from agricultural and forestry biomass waste have good application prospects in catalysis. In the present study, Xanthoceras sorbifolia shell waste was used as the raw material, Xanthoceras sorbifolia Bunge Carbon (XC) was used as the catalyst carrier, and K₂CO₃ was used as the activator to prepare a heterogeneous catalyst (KXC). The heterogeneous catalyst was characterized by scanning electron microscopy-energy dispersion X-ray spectroscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) and X-ray photoelectron spectroscopy (XPS) analysis techniques to evaluate its chemical composition, structure, and physical morphology. EDS and XPS revealed the presence of K metal, which provided an alkaline site for the transesterification reaction to produce biodiesel. The biodiesel yield was observed by gas chromatography−mass spectrometry (GCMS). Under the reaction conditions of a methanol-to-oil molar ratio of 12:1, a reaction time of 90 min, a temperature of 65 °C, and a catalyst loading of 4 wt.% using 25KXC-600-4, the yield of biodiesel can reach 95.13 ± 0.82%. After being repeated five times, the yield was still 58.11 ± 3.80%. The catalyst has no waste generation, and has the characteristics of simple preparation and environmental friendliness, which make it a green heterogeneous catalyst for biodiesel production. Full article

Vegetable oils, which are considered potential lubricants, are composed of different types and proportions of fatty acids. Because of their diverse types and varying compositions, they exhibit different lubrication performances. The genetic function approximation algorithm was used to model the quantitative structure–property relationship between fatty acid structure and the wear scar diameter and friction coefficients measured by four-ball friction and wear tests. Based on the models with adjusted R² greater than 0.9 and fatty acid compositions of vegetable oils, the wear scar diameter and friction coefficients of Xanthoceras sorbifolia bunge oil and Soybean oil as validation oil samples were predicted. The difference between the predicted and experimental values was small, indicating that the models could accurately predict the lubrication performances of vegetable oils. The lubrication performances of 14 kinds of vegetable oils were predicted by GFA-QSPR models, and the primary factors influencing their lubrication properties were studied by cluster analysis. The results show that the content of C18:1 has a positive effect on the lubrication performances of vegetable oils, while the content of C18:3 has a negative effect, and the length of the carbon chain of fatty acids significantly affects their lubrication properties. Full article

The WUSCHEL-related homeobox (WOX) gene family plays a crucial role in regulating embryonic development, organ formation, and stress resistance. Yellowhorn (Xanthoceras sorbifolia Bunge), a drought-resistant tree known for its oil production, lacks sufficient information regarding the WOX gene family. To understand the evolutionary mechanisms and potential functions of this gene family in yellowhorn, we conducted a comprehensive investigation on its expression patterns and evolutionary characteristics. Our analysis revealed the presence of nine XsWOX genes in the yellowhorn genome, which could be categorized into three distinct clades through a phylogenetic analysis. A chromosomal localization analysis indicated that these nine XsWOX genes were situated on six out of the fifteen chromosomes. An intra-species collinear analysis revealed only one pair of tandem duplicated genes within the XsWOX family. The promoter regions of the XsWOX family were found to contain responsive cis-acting elements associated with plant growth and development, stress responses, and hormone signaling. Moreover, an analysis of the gene expression profiles in different developmental stages of callus revealed significant expressions of XsWOX1, XsWOX4, and XsWOX5 in embryogenic callus and somatic embryo formation, suggesting that they have special roles in regulating yellowhorn’s somatic embryogenesis. Furthermore, the expression level of XsWOX5 indicated its potential involvement not only in organ formation but also in responding to low temperature, salt, and saline-alkali stresses. Overall, our findings lay a solid foundation for future in-depth studies on the functionality and evolution of XsWOX genes in yellowhorn. Full article

Soil carbon and nitrogen pools are crucial for maintaining the balance of carbon and nitrogen cycling in ecosystems and also for reducing the impacts of global climate change. However, current research lacks an understanding of the effects of long-term vegetation restoration on soil carbon and nitrogen pools and their storage in vulnerable ecosystems. Therefore, we studied the characteristics of soil carbon (soil organic carbon, microbial biomass carbon, dissolved organic carbon) and nitrogen pools (total nitrogen, ammonium nitrogen, nitrate nitrogen) and their storage under four types of vegetation restoration (Stipa bungeana Trin., SB; Caragana korshinskii Kom., CK; Xanthoceras sorbifolia Bunge., XS; Picea asperata Mast., PA) in the Longzhong Loess Plateau area. We found that the carbon and nitrogen pools in the 0–40 cm soil layer under the XS and PA vegetation restoration types were higher compared to those under the SB and CK vegetation, and the values of soil ammonium–nitrogen ratios ranged from 0.72 to 0.83 under different vegetation types. Carbon and nitrogen interactions were stronger in the 0–40 cm soil under PA vegetation, which had significantly higher soil carbon (49.06 t·ha⁻¹) and nitrogen (1.78 t·ha⁻¹) storage than did the other vegetation types. We also found that soil carbon and nitrogen stores differed among different types of vegetation restoration. These elements were mainly distributed in soils from 0 to 20 cm depth, where the carbon and nitrogen pools in soils from 0 to 10 cm exceeded those in the lower layers. Furthermore, we discovered that redundancy analysis (RDA) supported by soil enzyme activity and physical properties significantly explained the variation in soil carbon and nitrogen triggered by vegetation restoration. According to this research, the stability and transformation of soil carbon and nitrogen pools in the region can be influenced by various forms of vegetation restoration. Additionally, the findings highlight that forest vegetation restoration can be a successful strategy for effectively sequestering soil carbon and nitrogen within the Longzhong Loess Plateau area. Full article

Volatile compounds (VOCs) present in the oil extracted from yellow horn seeds were first analyzed using GC-IMS and GC-O-MS at varying roasting temperatures. A total of 97 VOCs were detected using GC-IMS, while 77 were tentatively identified using GC-O-MS. Moreover, both methods allowed the identification of 24 VOCs, of which the type of aldehydes is the most abundant. Combining the results of GC-IMS, GC-O-MS, OAVs, and VIP, it was concluded that hexanal, 2,5-dimethylpyrazine, heptanal, 2-pentylfuran, 1-hexanol, and 1-octen-3-ol were the key aroma compounds. The PLS-DA and OPLS-DA models have demonstrated the ability to discriminate between different oil roasting temperatures with high accuracy. The roasting temperature of 160 °C was found to yield the highest content of main aroma substances, indicating its optimality for yellow horn seed oil production. These findings will prove beneficial for optimizing industrial production and enhancing oil aroma control. Full article

Heterogeneous catalysts play a dual role in transesterification due to their advantages of being separable and reusable. In recent years, heterogeneous catalysts derived from renewable resources have received more attention. In this paper, the production of biodiesel from Xanthoceras sorbifolia bunge oil via transesterification was studied under the action of an ILe@Cu@MOF catalyst. Fourier-Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, scanning electron microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Thermogravimetric (TG) and other characterization methods were used to characterize the microstructure and thermal stability of the catalyst and further study the ILe@Cu@MOF catalyst for the preparation of biodiesel from Xanthoceras sorbifolia bunge oil. The results show that the surface of the ILe@Cu@MOF catalyst is attached with a sheet-like structure of isoleucine (ILe), which mainly contains Cu, O, C and N elements. The specific surface area is 19.687 m²/g, and the average pore size is 31.74 nm, which belongs to mesoporous material. The pyrolysis temperature of ILe@Cu@MOF reached 360 °C, indicating that the grafting of ILe had a protective effect on Cu@MOF and increased the pyrolysis temperature of Cu@MOF. At the same time, the water contact angle increased from 86° to 121°, and the material was hydrophobic. The optimum conditions for the preparation of biodiesel were as follows: the amount of catalyst was 3 wt%, the molar ratio of methanol to oil was 35:1, the reaction temperature was 50 °C, and the reaction time was 4 h. At this time, the biodiesel yield was up to 82.85%. Moreover, after five cycles of ILe@Cu@MOF, the yield still reached 73.4%. GC–MS and MNR studies showed that the quality of biodiesel after catalysis was higher. The prepared catalyst can make biodiesel products more sustainable, environmentally friendly and economical, and can provide future prospects for the energy utilization of renewable resources. Full article

Xanthoceras sorbifolia Bunge, an indigenous oilseed tree from China, is a major woody energy plant that has been used for biodiesel production for a long time. In the past decade, X. sorbifolia has become a hot research topic due to its diverse bioactivities, which include improving learning and memory deficits, killing sperm, stabilizing capillaries, lowering cholesterol, and rheumatism. This review aims to analyze a comprehensive appraisal of X. sorbifolia, including its history, traditional uses, biological activities, food value, economic value, and current applications, and provide instruction for promoting the multipurpose utilization of X. sorbifolia. Full article

In this study, we investigated and compared the oil yield, physicochemical properties, fatty acid composition, nutrient content, and antioxidant ability of Xanthoceras sorbifolia Bunge (X. sorbifolia) kernel oils obtained by cold-pressing (CP), hexane extraction (HE), aqueous enzymatic extraction (AEE), and supercritical fluid extraction (SFE). The results indicated that X. sorbifolia oil contained a high percentage of monounsaturated fatty acids (49.31–50.38%), especially oleic acid (30.73–30.98%) and nervonic acid (2.73–3.09%) and that the extraction methods had little effect on the composition and content of fatty acids. X. sorbifolia oil is an excellent source of nervonic acid. Additionally, the HE method resulted in the highest oil yield (98.04%), oxidation stability index (9.20 h), tocopherol content (530.15 mg/kg) and sterol content (2104.07 mg/kg). The DPPH scavenging activity rates of the oil produced by SFE was the highest. Considering the health and nutritional value of oils, HE is a promising method for X. sorbifolia oil processing. According to multiple linear regression analysis, the antioxidant capacity of the oil was negatively correlated with sterol and stearic acid content and positively correlated with linoleic acid, arachidic acid and polyunsaturated fatty acid content. This information is important for improving the nutritional value and industrial production of X. sorbifolia. Full article

The husks of Xanthoceras sorbifolia Bunge (X. sorbifolia), as by-products of industrial production, have brought a severe burden to the environment and caused an enormous waste of resources. Bioactive triterpenoid saponins are rich in the husks. To reuse the husks and gain high-quality saponin products, saponin-oriented deep eutectic solvents (DESs), as an efficient and selective extraction strategy from X. sorbifolia husks, were designed for the first time. The enhancement of the extraction rate was investigated by screening solvents from acidic DESs and response surface methodology (RSM) optimization. As a result, the tetrapropylammonium bromide-lactic acid (TPMBr-La) was the most efficient DESs, with an extraction efficiency of up to 135% higher than 70% ethanol. A maximum extraction rate of 72.11 ± 0.61 mg Re/g dw was obtained under the optimized parameters. Scanning electron microscope graphs revealed that damage to the microstructure caused by DESs enhanced the extraction efficiency. Moreover, the recovery of total saponins with D101 macroporous resin was consistent with the pseudo-second-order kinetic model. Seven saponins were also identified by HPLC-MS analysis. Finally, TPMBr-La extracts exhibited 92.30 ± 1.10% DPPH radical scavenging rate at 100 μg/mL, and 92.20 ± 0.30% ABTS radical scavenging rate at 1200 μg/mL. Our current research proposes a selective and high-efficiency substitute for the extraction of saponins and might contribute to further DESs application in the recycling of by-products. Full article

In the present work, the extraction process of total flavonoids (TFs) from X. sorbifolia flowers by ultrasound-assisted extraction was optimized under the response surface methodology (RSM) on the basis of single-factor experiments. The optimal extraction conditions were as follows: ethanol concentration of 80%, solid–liquid ratio of 1:37 (g/mL), temperature of 84 °C, and extraction time of 1 h. Under the optimized conditions, the extraction yield of the TFs was 3.956 ± 0.04%. The radical scavenging capacities of TFs against 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) were much greater than that of rutin. The results of antibacterial experiments indicated that the TFs displayed strong inhibitory activities on E. coli, S. aureus and Bacillus subtilis. Therefore, X. sorbifolia flowers can be used as a novel source of natural flavonoids, and the TFs have potential applications as natural antioxidants or antibacterial agents in the food and pharmaceutical industries. Full article

In order to explore the potential therapeutic effect of Xanthoceras sorbifolia Bunge. against Alzheimer’s disease, an HPLC-MS/MS method has been developed and validated for simultaneous determination in rat brain of eight neurotransmitters, including dopamine, norepinephrine, 5-hydroxy-tryptamine, acetylcholine, l-tryptophan, γ-aminobutyric acid, glutamic acid and aspartic acid with a simple protein precipitation method for sample pre-treatment. The brain samples were separated on a polar functional group embedded column, then detected on a 4000 QTrap HPLC-MS/MS system equipped with a turbo ion spray source in positive ion and multiple reaction monitoring mode. The method was fully validated to be precise and accurate within the linearity range of the assay, and successfully applied to compare the neurotransmitters in the rat brain from four groups of normal, Alzheimer’s disease, and the oral administration group of X. sorbifolia extract and huperzine. The results indicated that brain levels of dopamine, norepinephrine and acetyl choline all decreased in the AD rats, while l-tryptophan showed an opposite trend. After administration of the Xanthoceras sorbifolia extract and huperzine, the level of acetyl choline and tryptophan returned to normal. Combination of the metabolic analysis, the results indicated that acetyl choline and l-tryptophan could be employed as therapy biomarkers for AD, and the results shown that the crude extract of the husks from Xanthoceras sorbifolia might ameliorate the impairment of learning and memory in the Alzheimer’s disease animal model with similar function of AchEI as huperzine. The established method would provide an innovative and effective way for the discovery of novel drug against Alzheimer’s disease, and stimulate a theoretical basis for the design and development of new drugs. Full article

A low-cost activated carbon (XSBLAC) prepared from Xanthoceras Sorbifolia Bunge hull via chemical activation was investigated to determine its adsorption and desorption properties for zinc(II) ions from aqueous solutions. XSBLAC was characterized based on its N₂-adsorption/desorption isotherm, EDX, XRD, SEM and FTIR results. An adsorption study was conducted in a series of experiments to optimize the process variables for zinc(II) removal using XSBLAC. Modeling the adsorption kinetics indicated good agreement between the experimental data and the pseudo-second-order kinetic model. The Langmuir equilibrium isotherm fit the experimental data reasonably well. The calculated enthalpy (ΔH⁰), entropy (ΔS⁰) and Gibbs free energy (ΔG⁰) values revealed the endothermic and spontaneous nature of the adsorption process. HNO₃ displayed the best desorption performance. The adsorption mechanism was investigated in detail through FTIR and SEM/EDX spectroscopic analyses. The results suggested that XSBLAC is a potential biosorbent for removing zinc(II) from aqueous solutions. Full article

Xanthoceras sorbifolia Bunge. is used in traditional medicine in North China. To evaluate the anti-tumor and radical-scavenging activities of X. sorbifolia husks polyphenols and determine their structure-activity relationships, 37 polyphenols 1–37 were obtained by bioassay-guided fractionation. Two new compounds 1–2, and compounds 5, 6, 8, 9, 11, 14–17, 21–25, 27–29, 31, 33, 34, 36, and 37 were isolated from the genus Xanthoceras for the first time. Compounds 1–37 did not show strong cytotoxicity against the four tested tumor cell lines (A549, HepG2, MGC-803, and MFC) compared to paclitaxel and under the conditions tested in the anti-tumor assay, but compounds 3, 4, 7, 8, 10, 18–20, 25, 26, 29, 30, 32, and 35 exhibited stronger radical-scavenging activity than ascorbic acid in a 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt assay. This was the first report on the anti-tumor and radical-scavenging activities of the polyphenols isolated from X. sorbifolia husks. Overall, the present study contributed valuable information concerning X. sorbifolia husks use in medicine and pharmacology. Full article