Search Results (721)

Bilberry (Vaccinium myrtillus L.) fruits represent the recognized wellspring of bioactive compounds with various documented bioactivities. Although bilberry leaves are often treated as industrial by-products, they also represent a valuable source of phytochemicals with potential dermocosmetic applications. In this study, extracts of bilberry fruits and leaves were prepared using both conventional solvents (water and 50% ethanol) and natural deep eutectic solvents (NaDES) as green, biodegradable alternatives. The aim of this study was to examine the UV protective activity and inhibitory potential of those extracts against some enzymes (tyrosinase, hyaluronidase, collagenase) that are important in terms of skin conditioning and skin aging. The results of in vitro tests have shown the superiority of NaDES extracts compared to conventional extracts regarding all tested bioactivities. In addition, bilberry leaves extracts were more potent compared to fruit extracts in all cases. The most potent extract was bilberry leaf extract made with malic acid–glycerol, which exhibited strong anti-tyrosinase (IC₅₀ = 3.52 ± 0.26 mg/mL), anti-hyaluronidase (IC₅₀ = 3.23 ± 0.30 mg/mL), and anti-collagenase (IC₅₀ = 1.84 ± 0.50 mg/mL) activities. The correlation analysis revealed correlation between UV protective and anti-tyrosinase, UV protective and anti-collagenase as well as between anti-hyaluronidase and anti-collagenase activity. UV protection and anti-tyrosinase activity correlated significantly with chlorogenic acid and hyperoside contents in extracts. The extracts with the best activities also demonstrated a good safety profile in a 24 h in vivo study on human volunteers. Full article

The search for sustainable, economically viable, and effective plant protection strategies against pathogenic bacteria, fungi, and viruses is a major challenge in modern agricultural practices. Chitosan (CS) is an abundant cationic natural biopolymer known for its biocompatibility, low toxicity, and antimicrobial properties. Its potential use in agriculture for pathogen control is a promising alternative to traditional chemical fertilisers and pesticides, which raise concerns regarding public health, environmental protection, and pesticide resistance. This study focused on the preparation of chitosan nanoparticles (CS-NPs) through cross-linking with organic molecules, such as tannic acid (TA). Various formulations were explored for the development of stable nanoscale particles having encapsulation capabilities towards low compounds of varying polarity and with potential agricultural applications relevant to plant health and growth. The solution properties of the NPs were assessed using dynamic and electrophoretic light scattering (DLS and ELS); their morphology was observed through atomic force microscopy (AFM), while analytical ultracentrifugation (AUC) measurements provided insights into their molar mass. Their properties proved to be primarily influenced by the concentration of CS, which significantly affected its intrinsic conformation. Additional structural insights were obtained via infrared and UV–Vis spectroscopic measurements, while detailed fluorescence analysis with the use of three different probes, as model cargo molecules, provided information regarding the hydrophobic and hydrophilic microdomains within the particles. Full article

The development of sustainable and functional nanocomposites has attracted considerable attention in recent years due to their broad spectrum of potential applications, including wood preservation. Also, a global goal is to reuse the large volumes of waste for environmental issues. In this context, the aim of the study was to obtain soda lignin particles, to graft ZnO nanoparticles onto their surface and to apply these hybrids, embedded into a biodegradable polymer matrix, as protection/preservation coating for oak wood. The organic–inorganic hybrids were characterized in terms of compositional, structural, thermal, and morphological properties that confirm the efficacy of soda lignin extraction and ZnO grafting by physical adsorption onto the decorating support and by weak interactions and coordination bonding between the components. The developed solution based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and lignin-ZnO was applied to oak wood specimens by brushing, and the improvement in hydrophobicity (evaluated by water absorption that decreased by 48.8% more than wood, humidity tests where the treated sample had a humidity of 4.734% in comparison with 34.911% for control, and contact angle of 97.8° vs. 80.5° for untreated wood) and UV and fungal attack protection, while maintaining the color and aspect of specimens, was sustained. L.ZnO are well dispersed into the polymer matrix, ensuring a smooth and less porous wood surface. According to the results, the obtained wood coating using both a biodegradable polymeric matrix and a waste-based preservative can be applied for protection against weathering degradation factors, with limited water uptake and swelling of the wood, UV shielding, reduced wood discoloration and photo-degradation, effective protection against fungi, and esthetic quality. Full article

Aloin, a kind of active phenolic component, is sourced from Aloe vera. Recently, the determination of aloin has received enormous attention, owing to its positive performance (including anti-tumor, antibacterial, detoxification, liver protection, anti-stomach damage, and skin protection activities) and painful side effects (increased carcinogenicity caused by excessive use of aloin) impacting human health. This investigation was inspired by the good fluorescence properties of carbon dots (CDs); CD-based sensors have aroused a great deal of interest due to their excellent sensitivity and selectivity. Thus, it is of great significance to develop novel CD-based sensors for aloin determination. Herein, N,F-CDs were designed and synthesized through a convenient hydrothermal strategy; the synthesized N,F-CDs possessed good fluorescence performance and a small particle size (near 4.3 nm), which demonstrated the successful preparation of N,F-CDs. The resulting N,F-CDs possessed a large Stokes shift and could emit a highly stable green fluorescence. The fluorescence of the N,F-CDs could be effectively quenched by aloin through the inner filter effect. Furthermore, the synthesis procedure was easy to operate. Finally, the N,F-CD-coated test strips were fabricated and combined with a miniaturized fluorimeter for the fluorescence detection of aloin via the inner filter effect for the first time. The N,F-CD-coated test strips were fabricated and used for the fluorescence sensing of aloin, and the results were compared with a typical ultraviolet (UV) method. The N,F-CD-coated test strips exhibited high recovery (96.9~106.1%) and sensitivity (31.8 nM, n = 3), good selectivity, low sample consumption (1 μL), high speed (5 min), good stability, and anti-interference properties. The results indicate that N,F-CD-coated test strips are applicable for the quantitative determination of aloin in bovine serum, orange juice, and urine samples. Full article

Lignin, the most abundant renewable aromatic biopolymer on Earth, is rapidly emerging as a powerful enabler of next-generation sustainable technologies. This review shifts the focus to the latest industrial breakthroughs that exploit lignin’s multifunctional properties across energy, agriculture, healthcare, and environmental sectors. Lignin-derived carbon materials are offering scalable, low-cost alternatives to critical raw materials in batteries and supercapacitors. In agriculture, lignin-based biostimulants and controlled-release fertilizers support resilient, low-impact food systems. Cosmetic and pharmaceutical industries are leveraging lignin’s antioxidant, UV-protective, and antimicrobial properties to create bio-based, clean-label products. In water purification, lignin-based adsorbents are enabling efficient and biodegradable solutions for persistent pollutants. These technological leaps are not merely incremental, they represent a paradigm shift toward a materials economy powered by renewable carbon. Backed by global sustainability roadmaps like the European Green Deal and China’s 14th Five-Year Plan, lignin is moving from industrial residue to strategic asset, driven by unprecedented investment and cross-sector collaboration. Breakthroughs in lignin upgrading, smart formulation, and application-driven design are dismantling long-standing barriers to scale, performance, and standardization. As showcased in this review, lignin is no longer just a promising biopolymer, it is a catalytic force accelerating the global transition toward circularity, climate resilience, and green industrial transformation. The future of sustainable innovation is lignin-enabled. Full article

Viola philippica (VP), a traditional Chinese medicinal herb widely used for its antibacterial and antioxidant properties, has recently garnered attention for its potential in skin photoprotection. VP was extracted using glycerol (GLY), 1,3-propanediol (PDO), and 1,3-butanediol (BDO) at concentrations of 30%, 60%, and 90% (w/w) to evaluate its antioxidant and UV-protective properties. The total phenolic content (TPC) and total flavonoid content (TFC) of the nine extracts ranged from 34.73 to 71.45 mg GAEs/g and from 26.68 to 46.68 mg REs/g, respectively, with the highest TPC observed in 90% PDO and the highest TFC in 60% GLY. Antioxidant assays revealed IC₅₀ values of 0.49–1.26 mg/mL (DPPH), 0.10–0.19 mg/mL (ABTS), and 1.58–460.95 mg/mL (OH). Notably, the 60% GLY, 30% PDO, and 90% PDO extracts demonstrated notable protective effects against UVB-induced cell damage, reducing intracellular ROS levels and preventing DNA damage. RNA-seq analysis revealed that the protective effects were associated with the modulation of key molecular pathways, including neutrophil extracellular trap formation and TNF, IL-17, and HIF-1 signaling. These findings suggest that Viola philippica polyol extracts, particularly those using 60% GLY, 30% PDO, and 90% PDO, have promising potential for skin photoprotection and could be utilized as natural antioxidants in cosmetic formulations. Full article

During the operation of structures, the components and materials from which they are made are exposed to various environmental, technological, and operational impacts. In this context, the use of a modified water-dispersion composition containing finely dispersed fillers with enhanced protective and performance characteristics proves to be effective. This article examines the development of a paint-and-coating composition using hollow glass microspheres and modified diatomite as finely dispersed fillers. The influence of technological factors on the properties of coating materials based on a synthesized acrylic dispersion and fillers—such as modified diatomite and hollow glass microspheres ranging from 20 to 100 μm in size with a bulk density of 0.107–0.252 g/cm³—is analyzed. The optimal formulation of the coating materials was determined to ensure the required coating quality. Experimental results demonstrate the improved strength and hardness of the coating due to the use of acrylic dispersion obtained through an emulsifier-free method and modifiers in the form of finely dispersed fillers. It has been established that the resulting samples also exhibit high adhesion to mineral and metallic substrates, along with excellent corrosion resistance. Moreover, the incorporation of acrylic dispersion contributes to increased elasticity of the coating, resulting in improved resistance to washing and abrasion. The developed protective material can be applied to a variety of surfaces, including walls, ceilings, and roofs of buildings and structures, pipelines, and many other applications. Thus, modified water-dispersion compositions based on synthesized acrylic dispersion showed the following results: resistance to sticking—5, which is the best; chemical resistance and gloss level with standard single-phase acrylic dispersion—no destruction or change in gloss. The adhesion of coatings cured under natural conditions and under the influence of UV radiation was 1 point. The developed formulations for obtaining water-dispersion paint and varnish compositions based on synthesized polymer dispersions, activated diatomite, and hollow glass microspheres, meet all the regulatory requirements for paint and varnish materials in terms of performance, and in terms of economic indicators, the cost of 1 kg of paint is 30% lower than the standard. Full article

Helianthus annuus L. (H. annuus) receptacles, a major agricultural by-product generated during seed processing, are currently underutilized. This study aimed to explore the valorization potential of this by-product by extracting H. annuus receptacles total polysaccharides (HRTP) and characterizing their potential as natural ingredients in ultraviolet (UV)-protective cosmetics. A new purified polysaccharide named H. annuus receptacles polysaccharide-1 (HRP-1) was isolated, likely exhibiting a backbone of alternating →4)-α-D-GalA-(1→ and →4)-α-D-GalA(6-OCH₃)-(1→ units, with a weight-average molecular weight (Mw) of 163 kDa. HRTP demonstrated significant protective effects against UV-induced damage in human immortalized keratinocyte (HaCaT) cells by suppressing intracellular reactive oxygen species (ROS) levels and downregulating MAPK-p38/ERK/JNK pathways, thereby inhibiting inflammatory cytokines (IL-1β, IL-6, IL-8, and TNF-α) and matrix metalloproteinases (MMP-1, MMP-3, and MMP-9). Additionally, HRTP exhibited moisturizing properties. These findings highlight H. annuus receptacle polysaccharides as sustainable, bioactive ingredients for eco-friendly sunscreen formulations, providing a practical approach to converting agricultural by-products into high-value industrial biomaterials. Full article

This review examines the chemical functionalization of Camelina, hemp, and rapeseed oils for the development of sustainable bio-based resins. Key strategies, including epoxidation, acrylation, and click chemistry, are discussed in the context of tailoring molecular structure to enhance reactivity, compatibility, and material performance. Particular emphasis is placed on overcoming the inherent limitations of vegetable oil structures to enable their integration into high-performance polymer systems. The agricultural sustainability and environmental advantages of these feedstocks are also highlighted alongside the technical challenges associated with their chemical modification. Functionalized oils derived from Camelina, hemp, and rapeseed have been successfully applied in various resin systems, including protective coatings, pressure-sensitive adhesives, UV-curable oligomers, and polyurethane foams. These advances demonstrate their growing potential as renewable alternatives to petroleum-based polymers and underline the critical role of structure–property relationships in designing next-generation sustainable materials. Ultimately, the objective of this review is to distill the most effective functionalization pathways and design principles, thereby illustrating how Camelina, hemp, and rapeseed oils could serve as viable substitutes for petrochemical resins in future industrial applications. Full article

Background: Alcohol-associated liver disease (ALD) is a primary global health concern, exacerbated by oxidative stress, inflammation, and gut barrier dysfunction. Conventional phytocompounds exhibit hepatoprotective potential but are hindered by low bioavailability. This study aimed to evaluate the hepatoprotective and gut-barrier-restorative effects of green-synthesized silver nanoparticles (AgNPs) derived from Enicostemma littorale, a medicinal plant known for its antioxidant and anti-inflammatory properties. Methods: AgNPs were synthesized using aqueous leaf extract of E. littorale and characterized using UV-Vis, XRD, FTIR, DLS, and SEM. HepG2 (liver) and Caco-2 (colon) cells were exposed to 0.2 M ethanol, AgNPs (1–100 µg/mL), or both, to simulate ethanol-induced toxicity. A range of in vitro assays was performed to assess cell viability, oxidative stress (H₂DCFDA), nuclear and morphological integrity (DAPI and AO/EtBr staining), lipid accumulation (Oil Red O), and gene expression of pro- and anti-inflammatory, antioxidant, and tight-junction markers using RT-qPCR. Results: Ethanol exposure significantly increased ROS, lipid accumulation, and the expression of inflammatory genes, while decreasing antioxidant enzymes and tight-junction proteins. Green AgNPs at lower concentrations (1 and 10 µg/mL) restored cell viability, reduced ROS levels, preserved nuclear morphology, and downregulated CYP2E1 and SREBP expression. Notably, AgNPs improved the expression of Nrf2, HO-1, ZO-1, and IL-10, and reduced TNF-α and IL-6 expression in both cell lines, indicating protective effects on both liver and intestinal cells. Conclusions: Green-synthesized AgNPs from E. littorale exhibit potent hepatoprotective and gut-barrier-restoring effects through antioxidant, anti-inflammatory, and antilipidemic mechanisms. These findings support the therapeutic potential of plant-based nanoparticles in mitigating ethanol-induced gut–liver axis dysfunction. Full article

This study focuses on the stabilization of a natural hair dye derived from Lawsonia inermis L. (henna) and Indigofera suffruticosa (indigo). Although various formulations already exist, they are designed for immediate use and cannot be stored. Lawsonia, a primary component of the dye, tends to degrade after release. To ensure its stability, freeze-drying was implemented as a protective measure. Colorimetric analysis confirmed the dye’s ability to maintain an intense, uniform coloration even after multiple washing cycles. Stability tests demonstrate that freeze-drying effectively enhances the dye’s stability and capacity to retain its physical properties and color under various environmental conditions, demonstrating its potential for long-term use. The dye’s pH (5.05) aligns with the natural pH of hair, promoting cuticle sealing and improving hair health. Cytotoxicity tests confirmed the dye’s safety, showing no harmful effects. Gray hair exhibited a total color difference (ΔE) of 64.06 after the initial application, using natural gray hair as a reference. By the third application, ΔE increased to 69.86 and gradually decreased to 68.20 after 15 washing cycles, highlighting its long-term durability. Gray hair exposed to 720 h of UV radiation showed a ΔE of 17.34, whereas dyed gray hair exhibited a ΔE of 2.96 compared to non-UV-exposed samples. This indicates superior resistance to color degradation in dyed hair. Also, SEM imaging revealed the dye’s restorative effects, progressively improving hair cuticle structure with each application. Full article

The new generation of food packaging should not only be biodegradable, but also provide additional protective properties for packaged products, extending their shelf life. In this paper, we present the results of research on cast-extruded poly(butylene succinate) (PBS) films coated with hydroxypropyl methylcellulose (HPMC) modified with CO₂ extract from sea buckthorn (ES) or its ethosomes (ET) at amounts of 1 or 5 pph per HPMC. In addition, the developed films were exposed to accelerated aging (UV radiation and elevated temperature) to determine its effect on the films’ properties. Based on SEM, it can be concluded that accelerated aging results in the uncovering of the extract and ethosomes from the coating’s bulk. GPC showed a decrease in the molecular weight of PBS after treatment, additionally amplified by the presence of HPMC. However, the addition of ES or ET in low concentrations reduced the level of polyester degradation. The presence of the modified coating and its treatment increased the oxygen barrier (a decrease from 324 cm³/m² × 24 h for neat PBS to 208 cm³/m² × 24 h for the coated and modified PBS ET5). Despite the presence of colored extract or ethosomes in the coating, the color differences compared with neat PBS were imperceptible (ΔE < 1). The addition of 5 pph of sea buckthorn extract or its ethosomes in combination with accelerated aging resulted in the complete inhibition of the growth of E. coli and S. aureus, which was not observed in non-aged samples. The results obtained demonstrate an improvement in bioactive properties and protection against the negative effects of UV radiation on the film due to the presence of ET or ES in the coating. The developed systems could be used in the food industry as active packaging. Full article

Hamamelis virginiana L. (witch hazel) is a traditionally used medicinal plant, well-known for its dermatological applications. The plant’s bark and leaves contain a rich array of bioactive compounds, including phenolic acids, flavonoids, catechins, proanthocyanidins, and tannins, many of which exhibit antimicrobial, anti-inflammatory, antioxidant, and wound-healing properties. These activities have been verified by numerous in vitro and in vivo studies, as well as limited clinical trials. The H. virginiana extracts have demonstrated effectiveness against bacteria, fungi, and some viruses. Moreover, the extracts exert anti-inflammatory effects by modulating cytokine expression and NF-κB signaling, improve skin regeneration, and protect against UV-induced damage and pollution. This review highlights H. virginiana as a complex botanical resource to be used in dermatology and cosmetology and shows that current research offers encouraging results for its future therapeutic use, especially in skin treatment. Full article

This study investigates the effects of destructive climatic factors on the mechanical and performance properties of various structural materials, encompassing both polymers and metals. Over recent decades, the growing adoption of synthetic polymers has revolutionized engineering applications, yet their susceptibility to environmental degradation poses significant challenges. This research emphasizes the need for comprehensive testing under both operational and environmental stressors, including extreme temperatures, UV radiation, and moisture, to assess material durability and performance. Mechanical tests were conducted at ambient (25 °C) and low temperatures (−50 °C) to evaluate the strength and strain responses of selected materials. Additionally, a 12-month accelerated aging process using UV radiation and elevated temperatures was performed to simulate long-term environmental exposure. Parameters such as Shore D hardness, gloss, and mass were measured at regular intervals to quantify material degradation. The results revealed significant differences in performance across material types. Among polymers, laser-extruded and milky plexiglass, as well as solid polycarbonate, exhibited satisfactory resistance to aging, with minimal changes in mechanical properties. However, high-impact polystyrene displayed substantial deformation and hardness loss after prolonged UV exposure. For metals, aluminum and stainless steel (304 and 316) demonstrated exceptional durability, retaining structural and aesthetic properties after 12 months of accelerated aging, whereas galvanized steel exhibited pronounced corrosion. The study highlights the critical interplay between mechanical loading and environmental factors, stressing the importance of material selection tailored to specific climatic conditions. It further underscores the value of integrating experimental findings with predictive models, such as finite element analysis, to enhance the design and longevity of engineering materials. The findings provide actionable insights for industries operating in temperate climates, where materials are subjected to diverse and cyclic environmental stressors. Recommendations are offered for selecting resilient materials suitable for protective housings and structural components. Full article

Tetrastigma erubescens, a native medicinal plant of Vietnam, has long been used in folk medicine to manage various diseases, including skin-related issues. However, limited research has been conducted on this herb’s bioactivities and chemical composition. This study aims to investigate the chemical constituents and evaluate the anti-tyrosinase activity and UV-A/UV-B absorption capacity of T. erubescens extracts, highlighting their potential as natural sources for skin-whitening and sun protection agents. In vitro assays demonstrated that the ethyl acetate (EA) extract of T. erubescens exhibited a significant UV-A and UV-B absorption capacity. Notably, this extract showed a strong anti-tyrosinase activity for the first time, with a maximum inhibition rate of 99.2% and an IC₅₀ value of 70.3 µg/mL. Based on the UHPLC and GCMS analysis, phenolic compounds (1–9) and ten volatile constituents (10–19) were identified in the EA extract of T. erubescens. Of these, almost all volatiles and some phenolics were reported for the first time in this genus. The molecular docking analysis revealed that all identified phytochemicals showed a comparable or greater binding affinity to both mushroom tyrosinase (docking scores: from −7.5 to −14.1 kcal/mol) and human tyrosinase (from −6.7 to −14.8 kcal/mol) than kojic acid (−8.7 and −8.6 kcal/mol, respectively). In addition, these identified compounds showed favorable drug-like properties and low toxicity risks via ADMET prediction and Lipinski’s Rule of Five analyses. The results obtained in this work suggest that the EA extract of T. erubescens is a promising natural source of bioactive compounds for cosmetic applications, particularly in whitening and sun protection formulations. Full article