Search Results (161)

Environmental pollution from ozone and wastewaters containing dyes from various industries is an important problem for humanity. In this study, novel composite catalysts based on manganese carbonate ore from the Obrochishte deposit, Bulgaria, were used successfully in two environmentally relevant catalytic processes—the ozone decomposition and photocatalytic decolourization of Malachite Green (MG) dye under UV illumination. Manganese carbonate ore/NiO, manganese oxides, and silver-containing composites were synthesized via co-precipitation, followed by calcination at 500 °C or hydrothermal treatment at 160 °C, and then thermal treatment. The phase and elemental composition, structure, morphology, and textural characteristics of the obtained composites were investigated using powder X-ray diffraction analysis, wavelength-dispersive X-ray fluorescence, Fourier-transform infrared spectroscopy, scanning electron microscopy, nitrogen adsorption–desorption isotherms, and the BET method. The materials exhibit a mesoporous structure. The results established that the thermally treated MnCO₃ ore/NiO, manganese oxides, and Ag-containing composites demonstrate a higher catalytic efficiency for the removal of ozone (85%, 93%, and 99%) in comparison with hydrothermally treated analogues—79%, 66%, and 98%, respectively. The thermally treated manganese carbonate ore/silver-containing composite exhibits the highest photocatalytic ability (83% degree of decolourization of MG dye) compared to the other investigated catalysts. Full article

Acrylic resins are commonly used for denture bases due to ease of molding but are prone to water absorption and microbial contamination. This study aimed to evaluate the effects of ozonated water immersion (OZ), ultrasonic cleaning (US), and ultraviolet (UV) irradiation on the removal of Candida albicans from acrylic resins produced by heat curing and additive manufacturing. The resin specimens were then subjected to treatment with OZ, US, UV irradiation, and commercial denture cleansers. Following treatment, the number of viable C. albicans cells was quantified and statistically analyzed (α = 0.05), morphology was observed under a scanning electron microscope (SEM) and fluorescence imaging. OZ, US, and UV irradiation significantly reduced the viable C. albicans count. Notably, the combination of the three treatments achieved a reduction exceeding 99.9% of viable cells. Although SEM revealed that C. albicans remained on the specimens, fluorescence imaging demonstrated a progressive decrease in viable cells and an increase in dead cells with each treatment, with the greatest effect observed when the three treatments were combined. The difference of removal behaviors of C. albicans among fabrication methods was not observed, comparable to denture cleaners. The combined application of all three treatments was the most effective strategy for microbial removal. Full article

Water scarcity is fostering an urgent need to drive research into novel and synergistic water treatment approaches, with advanced oxidation processes (AOPs) emerging as a superior option for treating various contaminants. The spread of vinyl chloride (VC) through groundwater sources raises concerns for potable water production due to its toxic and carcinogenic properties. This study integrates ozone-based degradation experiments with data-driven modelling approaches to statistically characterize and predict VC removal under different water-matrix conditions. Ozonation alone enables partial removal of VC from two contaminated groundwater samples, while integration of O₃/H₂O₂ treatment further enhances the degradation efficacy (70–97%). Decreasing VC concentration below the parametric value of 0.5 µg/L requires application of the peroxone process or photodegradation by O₃/H₂O₂/UV for groundwater with higher levels of interfering compounds. Advanced machine learning models and ensemble methods were also tested to enhance predictive accuracy for target molecule degradation, considering water characteristics and treatment parameters as input features. An ensemble of Random Forest and Neural Network predictions yielded the best performance (R² = 0.99; Mean Squared Error = 10.8), demonstrating the effectiveness of ensemble approaches for complex chemical prediction tasks and highlighting areas for further refinement to improve interpretability and predictive consistency of AOP treatment outcomes. This study not only aligns with the current momentum in AI-assisted AOP research but also advances it by delivering a generalizable, reproducible, and interpretable ensemble model trained on experimentally diverse datasets. Full article

Biodegradable bioplastics have emerged as a promising sustainable alternative to minimize the environmental impact of traditional plastics. Nevertheless, many of them degrade slowly under natural or industrial conditions, raising concerns about their practical biodegradability. This fact is related to the high-order structure of the polymer backbones, i.e., high molar mass and high crystallinity. Research efforts are being devoted to the development of technologies capable of reducing the length of polymer segments by accelerated chain scission, which could help improve biodegradation rates upon disposal of bioplastic products. The objective of this review is to examine the current state of the art of abiotic degradation techniques, physically driven by temperature, mechanical stress, UV/gamma/microwave irradiation, or plasma or dielectric barrier discharge, and chemically induced by ozone, water, or acidic/basic solutions, with the aim of enhancing the subsequent biodegradation of bioplastics in controlled valorization scenarios such as composting and anaerobic digestors. Particular attention is given to pretreatment degradation technologies that modify surface properties to enhance microbial adhesion and enzymatic activity. Technologies such as ozonation and plasma-driven treatments increase surface hydrophilicity and introduce functional groups with oxygen bonds, facilitating subsequent microbial colonization and biodegradation. Irradiation-based techniques directly alter the chemical bonds at the polymer surface, promoting the formation of free radicals, chain scission, and crosslinking, thereby modifying the polymer structure. Pretreatments involving immersion in aqueous solutions may induce solution sorption and diffusion, together with hydrolytic chain breakage in bulk, with a relevant contribution to the ulterior biodegradation performance. By promoting abiotic degradation and increasing the accessibility of biopolymers to microbial systems, these pretreatment strategies can offer effective tools to enhance biodegradation and, therefore, the end-of-life management of bioplastics, supporting the transition toward sustainable cradle-to-cradle pathways within a biocircular economy. Full article

This study explores the effectiveness of ultraviolet (UV) irradiation, ozonation (O₃), granular activated carbon (GAC) adsorption, and their combinations (UV/GAC, O₃/GAC) in removing selected pharmaceuticals and common wastewater micropollutants under controlled laboratory-scale conditions. Eight target compounds—candesartan, irbesartan, valsartan, metoprolol, diclofenac, metformin, sucralose, and caffeine—were identified and quantified in real wastewater samples collected from a municipal wastewater treatment plant. Ozonation proved to be the most effective standalone method, achieving complete removal (100%) of five pharmaceuticals and partial removal of sucralose (~60%) and metformin (~17%). The combined O₃/GAC treatment further enhanced overall removal efficiency. In contrast, UV irradiation alone showed limited effectiveness. Importantly, all substances except metformin were fully removed by at least one of the tested methods. These findings underscore the potential of advanced and hybrid treatment technologies—validated here at the laboratory scale—for improving pharmaceutical removal from wastewater and mitigating their environmental impact. Full article

Depression is becoming more common in the face of modern life’s obstacles. Antidepressants are a fast-expanding pharmaceutical category. Antidepressant residues in water must be closely monitored and kept at levels that do not endanger human health, just like those of other psychotropic medications. Additionally, research has shown that these pollutants severely hinder aquatic life’s ability to migrate, reproduce, and interact with one another when they enter natural ecosystems. Antidepressants released into the natural environment can therefore be expected to have an impact on exposed fish and other aquatic species. There is a lot of information available about how exposure affects fish, but much of it is for exposure levels higher than those seen in their natural habitats. Antidepressants can bioaccumulate in fish tissues, and some behavioral effects have been documented for exposures that are relevant to the environment. As a result, antidepressant residue removal methods must be incorporated into contemporary wastewater treatment plant technology. In addition to covering a wide range of suggested treatment options and their ecotoxicological consequences on non-target organisms, this study discusses recent efforts to accomplish this goal. First, a thorough analysis of the harmful impacts on non-target people is provided. This work describes a variety of adsorptive methods that can make use of modern materials like molecularly imprinted polymers or ion-exchange resins or can rely on well-known and efficient adsorbents like silicates or activated carbon. Although extractive methods are also taken into consideration, they are now impractical due to the lack of reasonably priced and ecologically suitable solvents. Lastly, sophisticated oxidation methods are discussed, such as electrochemical alternatives, UV and gamma radiation, and ozone therapy. Notably, some of these techniques could totally mineralize antidepressant toxicants, either alone or in combination. Lastly, the topic of biological treatment with microorganisms is covered. This method can be very specific, but it usually prevents full mineralization. Full article

To address the challenge of treating reverse osmosis concentrate (ROC) in municipal wastewater reclamation processes, this study systematically investigated changes in ozone demand, organic compound molecular weight distribution, UV/fluorescence characteristics, and microalgal growth potential during ozone treatment of ROC. The ROC contained fast-reacting substances and had an instantaneous ozone demand of 6.3 mg/L. The chemical oxygen demand (COD) and total organic carbon were partially removed, and the COD/five-day biochemical oxygen demand ratio increased slightly during the ozonation process. The molecular weight components shifted considerably during ozonation: the 300 Da–1000 Da components became dominant (51.6–72.3%), while the 1000 Da–4000 Da and <300 Da components were partially or completely removed. The maximum absorbance of the ROC peaked at 270 nm. At an ozone dosage of 84 mg/L, the UV₂₅₄ and UV₂₇₀ removal rates reached 76.9% and 86.5%, respectively. The three-dimensional fluorescence spectra showed that ozone effectively removed tryptophan-type aromatic proteins, fulvic acid-type substances, aromatic proteins, soluble microbial metabolites, and humic acid-type substances from the concentrate (84.6–88.9%), but only removed a minimal amount of the tyrosine-type aromatic protein (7.4%). The UV₂₅₄ at different molecular weights and the fluorescence area integrals across regions declined rapidly initially, then slowed gradually, correlating with the rapid reaction of UV/fluorescence chromophore-containing substances in ROC. Studies on microalgal growth potential indicate that ozonation increased the maximum algal density (K) in ROC (48.9–91.7%), while ozone/coagulation effectively reduced K (35.1–76.6%). This occurs because ozone converts organic phosphonate antiscalants in ROC into more readily absorbable inorganic phosphorus, whereas ozone/coagulation effectively removes total phosphorus from water. These results can guide the safe disposal of ROC and facilitate sustainable reclamation of municipal wastewater. Full article

Antibiotics are essential for treating bacterial and fungal infections in plants, animals, and humans. Their widespread use in agriculture and the food industry has significantly enhanced animal health and productivity. However, extensive and often inappropriate antibiotic use has driven the emergence and spread of antimicrobial resistance (AMR), a global health crisis marked by the reduced efficacy of antimicrobial treatments. Recognized by the World Health Organization (WHO) as one of the top ten global public health threats, AMR arises when certain bacteria harbor antimicrobial resistance genes (ARGs) that confer resistance that can be horizontally transferred to other bacteria, accelerating resistance spread in the environment. AMR poses a significant global health challenge, affecting humans, animals, and the environment alike. A One-Health perspective highlights the interconnected nature of these domains, emphasizing that resistant microorganisms spread across healthcare, agriculture, and the environment. Recent scientific advances such as metagenomic sequencing for resistance surveillance, innovative wastewater treatment technologies (e.g., ozonation, UV, membrane filtration), and the development of vaccines and probiotics as alternatives to antibiotics in livestock are helping to mitigate resistance. At the policy level, global initiatives including the WHO Global Action Plan on AMR, coordinated efforts by (Food and Agriculture Organization) FAO and World Organisation for Animal Health (WOAH), and recommendations from the O’Neill Report underscore the urgent need for international collaboration and sustainable interventions. By integrating these scientific and policy responses within the One-Health framework, stakeholders can improve antibiotic stewardship, reduce environmental contamination, and safeguard effective treatments for the future. Full article

This study couples a carbon quantum dot photocatalyst with a proton relay installed (EDTA-CQDs) for efficient hydrogen peroxide (H₂O₂) production with an ozone (O₃) system. In situ activation of O₃ is achieved by the photogenerated H₂O₂, which integrates the photocatalytic hydrogen peroxide production (PHP) and advanced oxidation processes (AOPs) to form a new photocatalytic peroxone (H₂O₂/O₃) system, achieving highly efficient solar-driven degradation of recalcitrant organic pollutants in landfill leachate without the addition of external H₂O₂. The composite system exhibits efficient degradation ability for various typical pollutants in landfill leachate, among which the degradation percentage of 100 mg L⁻¹ hydroquinone (HQ) reaches 97% within 30 min. This is due to the synergistic effects of O₃ oxidation, photoactivation of O₃, activation of O₃ by EDTA-CQDs, and activation of O₃ by in situ-generated H₂O₂. In the EDTA-CQD-based H₂O₂/O₃ system, free radicals can be dynamically regenerated after the addition of pollutants, achieving sustained and efficient degradation. Therefore, in the treatment of actual leachate, the removal percentages of COD, TOC, and UV254 are nearly 90%, 70%, and 55%, respectively, demonstrating the significant advantage of this system in treating high-concentration recalcitrant organic pollutants in wastewater of complex quality. Full article

In the context of exponential global population growth, climate change, and increasingly stringent regulations limiting the use of agrochemical inputs, it is essential to explore sustainable alternatives that can enhance crop productivity. This study contributes to the search for innovative solutions to address these challenges by evaluating more efficient and environmentally friendly agricultural practices. Among such alternatives, seed priming has emerged as a promising and cost-effective technique to improve crop performance. In this work, the responses of wheat and barley seeds to treatments involving low-dose ultraviolet (UV) radiation, ozone, and nutripriming—a technique based on soaking seeds in nutrient solutions containing boron (B), iron (Fe), and/or zinc (Zn), were evaluated. All treatments were initially assessed under in vitro conditions using a Petri dish assay, followed by a tray cell experiment to evaluate their impact on various seedling biometric parameters. For nutripriming, an additional experiment was conducted under deficit irrigation to examine its effectiveness under water stress. A field trial was subsequently performed to evaluate the transferability of the results to real-world conditions. Seed priming with UV and ozone significantly enhanced root development in the in vitro assay for both crops, but these effects were not consistently observed in the tray experiment. In the field trial, the UV treatment increased thousand grain weight (TGW) in wheat, although no improvements in final yield were detected. Nutripriming treatments produced positive effects in both the Petri dish and tray experiments. Individual nutrient treatments mitigated early water stress in wheat and enhanced root development in barley. Combined nutrient treatments generally showed no significant effects, with the exception of the Zn+B combination, which improved shoot development in barley. Although no statistically significant differences were observed in the field trial, positive trends were identified, supporting the need for further research under diverse field conditions. Full article

Blueberries are in high demand worldwide because of their taste and functional components. However, the shelf life of blueberries is short owing to their perishability and rapid quality deterioration. Therefore, a sterilization technology must be developed that can extend the shelf life of blueberries while maintaining their appearance and taste. As such, we verified the effectiveness of three pre-storage sterilization treatments (UV-C, ozone gas, and ozone water) using mercury-free excimer UV lamps that did not adversely affect the environment. We then created a device that continuously treated blueberries with approximately 2.57 ppm of ozone gas to ensure sterilization during the storage period, and we verified the effectiveness of the device. We found that the pre-storage ozone treatment reduced the number of fungi on the blueberry surface without adversely affecting fruit quality. The continuous ozone treatment suppressed the decrease in anthocyanin content, further reduced the number of fungi on the fruit surface and maintained fruit appearance for a longer period compared with the control. This suggests that continuous low-concentration ozone treatment suppresses the decay and extends the storage period of blueberries intended for raw consumption. Full article

Cost-effective procedures usually cannot achieve complete removal of priority contaminants present in water at very low concentrations (as pesticides or pharmaceuticals). Advanced oxidation processes (AOPs) represent promising technologies for removing priority contaminants from water at trace concentrations, yet practical implementation remains limited due to technical and economic constraints. This study presents an innovative flow-through photodegradation device designed to overcome current limitations while achieving efficient contaminant removal at industrial scale. The device integrates a UVC 254 nm lamp-equipped flow chamber with automated dosing pumps for hydrogen peroxide and/or solid catalyst suspensions, coupled with a 30 nm porous membrane filtration system for catalyst recirculation. This configuration optimizes light–catalyst–pollutant contact while enabling combined catalytic processes. Performance evaluation using acesulfame (ACE) and iohexol (IHX) as model contaminants demonstrated rapid and effective removal. IHX degradation with UVC and 75 μM H₂O₂ achieved complete removal with t₉₅% = 7.23 ± 1.21 min (pseudo-order 0.25, t₁/₂ = 3.27 ± 0.39 min), while ACE photolysis (with UVC only) required t₉₅% = 14.88 ± 2.02 min (pseudo-order 1.27, t₁/₂ = 2.35 ± 0.84 min). The introduction of t₉₅% as a performance metric provides practical insights for near-complete contaminant removal requirements. Real-world efficacy was confirmed using tertiary wastewater treatment plant effluents containing 14 μg/L IHX, achieving complete removal within 8 min. However, carbamazepine degradation proved slower (t₉₅% > 74 h), highlighting the need for combined catalytic approaches for recalcitrant compounds. Spiking experiments (1000 μg/L) revealed concentration-dependent kinetics and synergistic effects between co-present contaminants. Analysis identified degradation byproducts consistent with previous studies, including tri-deiodinated iohexol (474.17 Da) intermediates. This scalable system, constructed from commercially available components, demonstrates potential for cost-effective industrial implementation. The modular design allows adaptation to various contaminants through adjustable AOP combinations (UV/H₂O₂, photocatalysts, ozone), representing a practical advancement toward addressing the gap between laboratory-scale photocatalytic research and full-scale water treatment applications. Full article

Introduction: Extrinsic skin damage is often a result of oxidative stress caused by exposure to environmental factors such as ultraviolet (UV) radiation, ozone (O₃), and various pollutants. As a result, topical antioxidants have been evaluated for their effectiveness in mitigating or reversing skin damage caused by environmental factors. Topical antioxidants containing a combination of l-ascorbic acid, tocopherol, and ferulic acid have significantly improved markers of skin health after exposure to environment-induced skin damage. However, research suggests that l-ascorbic acid and tocopherol tend to be relatively unstable, possibly affecting their efficacy against outdoor stressor damage. It has been shown that ferulic acid significantly improves the stability of both l-ascorbic acid and tocopherol, but its long-term stabilization effects on these antioxidants are relatively unknown. Material and Methods: This study evaluated the time-dependent effectiveness of a topical antioxidant mix containing 15% l-ascorbic acid, 1% tocopherol, and 0.5% ferulic acid (AOX) on UV-induced skin damage. Skin biopsies (12 mm, n = 60) were placed in a 6-well plate with medium and incubated at 37 °C and 5% CO₂ overnight. The day after, skin samples were pretreated with 10 µL of differently aged AOX (0-, 6-, 12-, and 36-month-old) and then exposed to different doses of UV light (100, 200, 400 mJ/cm²) daily over four days. AOX formulations were stored in a cool, dry, and dark place at approximately 20–22 °C during the whole study. This study evaluated 4-hydroxynonenal (4-HNE) and 8-hydroxy-2′-deoxyguanosine (8-OHdG) as oxidative damage and skin DNA damage markers, Collagen1 and Filaggrin as skin structure, and IL-8 and Nrf2 as inflammatory and defensive response. Results: UV exposure significantly increased oxidative and inflammatory markers in human skin explants affecting also filaggrin and collagen levels. However, pre-treatment with the antioxidant formulation, particularly in its younger formulations (0-, 6-, and 12-month-old), significantly reduced the damaging effect of UV. Additionally, all antioxidant formulations effectively mitigated UV-induced damage across all doses. Conclusions: Our results indicate that pre-treatment with this formulation consistently reduces UV-induced oxidative damage and DNA damage in human skin explants, regardless of the formulation age and the discoloration state. Although effective, the protective capacity of aged formulations may be reduced only when extreme UV exposure is tested, a condition that is unlikely to occur under typical environmental conditions. These results support ferulic acid as a stabilization agent for topical antioxidant mixtures. Full article

Background: The emergence and spread of antimicrobial-resistant bacteria (ARB) has become an urgent global concern as a silent pandemic. When taking measures to reduce the impact of antimicrobial resistance (AMR) on the environment, it is important to consider appropriate treatment of wastewater from medical facilities. Methods: In this study, a continuous-flow wastewater treatment system using ozone and ultraviolet light, which has excellent inactivation effects, was implemented in a hospital in an urban area of Japan. Results: The results showed that 99% (2 log₁₀) of Gram-negative rods and more than 99.99% (>99.99%) of ARB comprising ESBL-producing Enterobacterales were reduced by ozone treatment from the first day after treatment, and ultraviolet light-emitting diode (UV-LED) irradiation after ozone treatment; UV-LED irradiation after ozonation further inactivated the bacteria to below the detection limit. Inactivation effects were maintained throughout the treatment period in this study. Metagenomic analysis showed that the removal of these microorganisms at the DNA level tended to be gradual in ozone treatment; however, the treated water after ozone/UV-LED treatment showed a 2 log₁₀ (>99%) removal rate at the end of the treatment. The residual antimicrobials in the effluent were benzylpenicillin, cefpodoxime, ciprofloxacin, levofloxacin, azithromycin, clarithromycin, doxycycline, minocycline, and vancomycin, which were removed by ozone treatment on day 1. In contrast, the removal of ampicillin and cefdinir ranged from 19% to 64% even when combined with UV-LED treatment. Conclusions: Our findings will help to reduce the discharge of ARB and antimicrobials into rivers and maintain the safety of aquatic environments. Full article

Diclofenac (DCF), a widely consumed non-steroidal anti-inflammatory drug, presents significant environmental challenges due to its persistence and toxicity in aquatic ecosystems. This study investigates the pH-dependent ozonation of DCF in aqueous media, focusing on degradation kinetics, transformation pathways, and effects on key water quality indicators. Ozonation experiments were conducted across a broad pH range (2.0–13.0), using a multi-scale analytical approach combining UV/Vis spectroscopy, colorimetry, turbidity, and aromaticity measurements. The results show that pH strongly influences DCF degradation efficiency: acidic conditions favor selective reactions with molecular ozone, while an alkaline pH enhances non-selective oxidation via hydroxyl radicals. Spectroscopic analyses revealed the progressive breakdown of aromatic structures, the transient formation of quinonoid and phenolic intermediates, and eventual mineralization to inorganic by-products such as nitrate. Low-pH conditions also induced turbidity due to precipitation of neutral DCF species. These findings underline the importance of pH control in optimizing ozonation performance and minimizing toxic by-products. Furthermore, this study proposes ozonation as a viable pre-treatment step within Nature-Based Solutions (NBSs), potentially improving the performance of downstream biological systems such as constructed wetlands. The results contribute to the development of integrated and sustainable water treatment strategies for pharmaceutical contaminant removal and water reuse. Full article