Search Results (423)

The spaceborne full-polarimetric (FP) synthetic aperture radar (SAR) is an advanced sensor for high-resolution Earth observation. However, FP data acquired by such a system are prone to distortions induced by ionospheric Faraday rotation (FR). From the perspective of exploiting these distortions, this enables the estimation of the ionospheric FR angle (FRA), and consequently the total electron content, across most global regions (including the extensive ocean areas) using spaceborne FP SAR measurements. The accuracy of FRA estimation, however, is highly sensitive to noise interference. This study addresses denoising in FRA retrieval based on the Bickel–Bates estimator, with a specific focus on noise reduction methods built upon the adaptive Goldstein filter (AGF) that was originally designed for radar interferometric processing. For the first time, three signal-to-noise ratio (SNR)-based AGFs suitable for FRA estimation are investigated. A key feature of these filters is that their SNRs are all defined using the amplitude of the Bickel–Bates estimator signal rather than the FRA estimates themselves. Accordingly, these AGFs are applied to the estimator signal instead of the estimated FRAs. Two of the three AGFs are developed by adopting the mathematical forms of SNRs and filter parameters consistent with the existing SNR-based AGFs for interferogram. The third AGF is newly proposed by utilizing more general mathematical forms of SNR and filter parameter that differ from the first two. Specifically, its SNR definition aligns with that widely used in image processing, and its filter parameter is derived as a function of the defined SNR plus an additionally introduced adjustable factor. The three SNR-based AGFs tailored for FRA estimation are tested and evaluated against existing AGF variants and classical image denoising methods using three sets of FP SAR Datasets acquired by the L-band ALOS PALSAR sensor, encompassing an ocean-only scene, a plain land–ocean combined scene, and a more complex land–ocean combined scene. Experimental results demonstrate that all three filters can effectively mitigate noise, with the newly proposed AGF achieving the best performance among all denoising methods included in the comparison. Full article

The mineral-mapping capability of three spaceborne sensors with different spatial and spectral resolutions, the Environmental Mapping and Analysis Program (EnMap), Sentinel-2, and World View-3 (WV3), is assessed regarding bauxite mining wastes in Amphissa, Greece, with validation based on ground samples. We applied the well-established Linear Spectral Unmixing (LSU) and Spectral Angle Mapping (SAM) classification techniques utilizing endmembers of two established spectral libraries and incorporated ground data through geochemical and mineralogical analyses, X-ray fluorescence (XRF), Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS), and X-ray Diffraction (XRD), to assess classification performance. The main lithologies in this area are bauxites and limestones; therefore, aluminum oxyhydroxides, calcite, and iron oxide minerals were the dominant phases as indicated by the XRF/XRD results. Almost all target minerals were mapped with the three sensors and both methods. The performance of EnMap is affected by its coarser spatial resolution despite its higher spectral resolution using these methods. Sentinel-2 is most effective for mapping iron-bearing minerals, particularly hematite, due to its higher spatial resolution and the presence of diagnostic iron oxide absorption features in the VNIR. World View 3 Shortwave Infrared (WV3-SWIR) performs better when mapping calcite, benefiting from its eight SWIR spectral bands and very high spatial resolution (3.7 m). Hematite and calcite yield the highest accuracy, especially with SAM, indicating 0.80 for Sentinel-2 (10 m) for hematite and 0.87 for WV3-SWIR (3.7 m) for calcite. AlOOH shows higher accuracy with SAM, ranging from 0.57 to 0.80 across the sensors, while LSU shows lower accuracy, ranging from 0.20 to 0.73 across the sensors. This study showcases each sensor’s ability to map minerals while also demonstrating that spectral coverage and the spatial and spectral resolution, as well as the characteristics of the selected endmembers, exert a critical influence on the accuracy of mineral mapping in mine waste. Full article

Using the near-space platform to conduct radiometric calibrations of ocean color sensors is a promising method for refining calibration precision, but there is knowledge gap about the radiance contributions above near-space over the open ocean. We used the radiative transfer (RT) model (PCOART) to assess the contributions (L_R) of the upwelling radiance received at the near-space balloons to the total radiance (L_t) measured at the top of the atmosphere (TOA). The results indicated that the L_R displayed distinct geometric dependencies with exceeding 2% across most observation geometries. Moreover, the L_R increased with wavelengths under the various solar zenith angles, and the L_R values fell below 1% only for the two near-infrared bands. Additionally, the influences of variations in oceanic constituents on L_R were negligible across various azimuth angles and spectral bands, except in nonalgal particle (NAP)-dominated waters. Furthermore, the influences of aerosol optical thicknesses (AOTs) and atmospheric vertical distributions on L_R were examined. Outside glint-contaminated areas, the atmosphere-associated L_R variations could exceed 2% but declined substantially as AOTs increased under most observation geometries. The mean height of the vertically inhomogeneous layer (h_m) significantly influenced L_R, and the differences in L_t could exceed 5% when comparing atmospheric vertical distributions following homogeneous versus Gaussian-like distributions. Finally, the transformability from near-space radiance to L_t was examined based on a multiple layer perceptron (MLP) model, which exhibited high agreement with the RT simulations. The MAPD averaged 0.420% across the eight bands, ranging from 0.218% to 0.497%. Overall, the radiometric calibration utilizing near-space represents a significant innovation method for satellite-borne ocean color sensors. Full article

Eutrophication has emerged as a critical threat to water quality degradation and ecosystem health on a global scale, calling for prompt management actions. Remote sensing enables the monitoring of eutrophication by detected changes in ocean color caused by fluctuations in chlorophyll a (chl a). Although chl a is a crucial indicator of phytoplankton biomass and nutrient overloading, it reflects the outcome of eutrophication rather than its cause. Nutrients, the primary “drivers” of eutrophication, are essential indicators for predicting the potential phytoplankton growth in water bodies, allowing adoption of effective preventive measures. Long-term monitoring of nutrients combined with multiple water quality indicators using remotely sensed data could lead to a more precise assessment of the trophic state. Retrieving non-optically active constituents, such as nutrients and DO, remains challenging due to their weak optical characteristics and low signal-to-noise ratios. This work is an attempt to review the current progress in the retrieval of un-ionized ammonia (NH₃), ammonium (NH₄⁺), ammoniacal nitrogen (AN), nitrite (NO₂⁻), nitrate (NO₃⁻), dissolved inorganic nitrogen (DIN), phosphate (PO₄³⁻), dissolved inorganic phosphorus (DIP), silicate (SiO₂) and dissolved oxygen (DO) using remotely sensed data. Most studies refer to Case II highly nutrient-enriched water bodies. The commonly used spaceborne and airborne sensors, along with the selected spectral bands and band indices, per study area, are presented. There are two main model categories for predicting nutrient and DO concentration: empirical and artificial intelligence (AI). Comparative studies conducted in the same study area have shown that ML and NNs achieve higher prediction accuracy than empirical models under the same sample size. ML models often outperform NNs when training data are limited, as they are less prone to overfitting under small-sample conditions. The incorporation of a wider range of conditions (e.g., different trophic state, seasonality) into model training needs to be tested for model transferability. Full article

Space-based gravitational wave detection imposes extremely high requirements on displacement measurement accuracy, with its core measurement components being laser interferometers and inertial sensors. The laser interferometers detect gravitational wave signals by measuring the distance between two test masses (TMs) housed within the inertial sensors. Spatial alignment errors of the TMs relative to the laser interferometers can severely degrade the interferometric performance, primarily by significantly amplifying tilt-to-length (TTL) coupling noise and reducing interferometric efficiency. This paper presents a systematic analysis of the coupling mechanisms between TM alignment errors and TTL coupling noise. We first establish a comprehensive TTL noise model that accounts for alignment errors, then verify and analyze it through optical simulations. This research ultimately clarifies the coupling mechanisms of TM alignment errors in the context of space-borne gravitational wave missions and determines the allowable alignment tolerance specifications required to meet the gravitational wave detection sensitivity requirements. This work provides critical theoretical foundations and design guidance for the ground alignment procedures and on-orbit performance prediction of future space-based gravitational wave detection missions. Full article

Correcting atmospheric effects on hyperspectral optical satellite scenes is paramount to ensuring the accuracy of derived bio-geophysical products. The open-access benchmark Atmospheric Correction Inter-comparison eXercise (ACIX) was first initiated in 2016 and has now been extended to provide a comprehensive assessment of atmospheric processors of space-borne imaging spectroscopy missions (EnMAP and PRISMA) over land surfaces. The exercise contains 90 scenes, covering stations of the Aerosol Robotic Network (AERONET) for assessing aerosol optical depth (AOD) and water vapour (WV) retrievals, as well as stationary networks (RadCalNet and HYPERNETS) and ad hoc campaigns for surface reflectance (SR) validation. AOD, WV, and SR retrievals were assessed using accuracy, precision, and uncertainty metrics. For AOD retrieval, processors showed a range of uncertainties, with half showing overall uncertainties of <0.1 but going up to uncertainties of almost 0.4. WV retrievals showed consistent offsets for almost all processors, with uncertainty values between 0.171 and 0.875 g/cm². Average uncertainties for SR retrievals depend on wavelength, processor, and sensor (uncertainties are slightly higher for PRISMA), showing average values between 0.02 and 0.04. Although results are biased towards a limited selection of ground measurements over arid regions with low AOD, this study shows a detailed analysis of similarities and differences of seven processors. This work provides critical insights for understanding the current capabilities and limitations of atmospheric correction algorithms for imaging spectroscopy, offering both a foundation for future improvements and a first practical guide to support users in selecting the most suitable processor for their application needs. Full article

During the suspension flight of high-altitude scientific balloons in near-space, they are highly vulnerable to time-varying wind field disturbances, which tend to excite multiple distinctive torsional modes of the balloons themselves, thereby interfering with the observations of balloon-borne equipment. Focusing on the azimuth control of the balloon-borne gondola, this paper designs a simplified decoupling mechanism and a reaction wheel as actuators. Specifically, the reaction wheel achieves azimuth tracking through angular momentum exchange, while the simplified decoupling mechanism performs the functions of decoupling and unloading. To fully utilize the control performance of the actuating structure, this paper further proposes a control algorithm based on a nonlinear differential tracker and neural network PID. Simulation results demonstrate that under typical wind disturbances and sensor noise conditions, the proposed system exhibits excellent smoothness and high-precision and stable control performance. This research provides a significant basis for stable observation platforms in precise near-space observation missions. Full article

Extreme climate events such as heatwaves are becoming more frequent and pose serious challenges in cities. Urban areas are particularly vulnerable because built surfaces absorb and release heat, while human activities generate additional greenhouse gases. This increases health risks, making it crucial to study population exposure to heat stress. This research focuses on Naples, Italy’s most densely populated city, where intense human activity and unique geomorphological conditions influence local temperatures. The presence of a Surface Urban Heat Island (SUHI) is assessed by deriving high-resolution Land Surface Temperature (LST) in a time series ranging from 2013 to 2023, processed with the Statistical Mono Window (SMW) algorithm in the Google Earth Engine (GEE) environment. SMW needs brightness temperature (Tb) extracted from a Landsat 8 (L8) Thermal InfraRed Sensor (TIRS), emissivity from Advanced Spaceborne and Thermal Emission Radiometer Global Emissivity Database (ASTERGED), and atmospheric correction coefficients from the National Center for Environmental Prediction and Atmospheric Research (NCEP/NCAR). A total of 64 nighttime images were processed and analyzed to assess long-term trends and identify the main heat islands in Naples. The hottest image was compared with population data, including demographic categories such as children, elderly people, and pregnant women. A risk index was calculated by combining temperature values, exposure levels, and the vulnerability of each group. Results identified three major heat islands, showing that risk is strongly linked to both population density and heat island distribution. Incorporating Local Climate Zone (LCZ) classification further highlighted the urban areas most prone to extreme heat based on morphology. Full article

This study investigates multi-level coupled dynamic issues in near-space balloon-borne astronomical observation platforms subjected to multi-source disturbances, proposing an integrated azimuth pointing control scheme combining unified modeling with composite control strategies. A nonlinear dynamic model is established to characterize inertial coupling effects between the gondola system and secondary gimbal platform. The velocity-loop feedback mechanism utilizing fiber-optic gyroscopes achieves base disturbance decoupling, while an adaptive fuzzy PID controller enhances position-loop disturbance rejection capabilities. A gain adaptation strategy coordinates hierarchical control dynamics, complemented by anti-windup constraints safeguarding actuator operational boundaries. Simulation verifications confirm the exceptional high-precision pointing capability and robust stability under representative wind disturbances and sensor noise conditions. The system maintains a superior control performance across parameter perturbation scenarios, demonstrating consistent operational reliability. This study provides an innovative technical paradigm for precision observation missions in near space. Full article

This study provides a comprehensive and systematic review of hyperspectral remote sensing in urban areas, with a focus on the evolving roles of airborne and spaceborne platforms. The main objective is to assess the state of the art and identify current trends, challenges, and opportunities arising from the scientific literature (the gray literature was intentionally not included). Despite the proven potential of hyperspectral imaging to discriminate between urban materials with high spectral similarity, its application in urban environments remains underexplored compared to natural settings. A systematic review of 1081 peer-reviewed articles published between 1993 and 2024 was conducted using the Scopus database, resulting in 113 selected publications. Articles were categorized by scope (application, method development, review), sensor type, image processing technique, and target application. Key methods include Spectral Unmixing, Machine Learning (ML) approaches such as Support Vector Machines and Random Forests, and Deep Learning (DL) models like Convolutional Neural Networks. The review reveals a historical reliance on airborne data due to their higher spatial resolution and the availability of benchmark datasets, while the use of spaceborne data has increased notably in recent years. Major urban applications identified include land cover classification, impervious surface detection, urban vegetation mapping, and Local Climate Zone analysis. However, limitations such as lack of training data and underutilization of data fusion techniques persist. ML methods currently dominate due to their robustness with small datasets, while DL adoption is growing but remains constrained by data and computational demands. This review highlights the growing maturity of hyperspectral remote sensing in urban studies and its potential for sustainable urban planning, environmental monitoring, and climate adaptation. Continued improvements in satellite missions and data accessibility will be key to transitioning from theoretical research to operational applications. Full article

Accurate observations of Ocean Surface Wind Speed (OSWS) are vital for predicting extreme weather and understanding ocean–atmosphere interactions. However, spaceborne sensors (e.g., ASCAT, SMAP) often experience data loss due to harsh weather and instrument malfunctions. Existing inpainting methods often rely on reanalysis data that is released with delays, which restricts their real-time capability. Additionally, deep-learning-based methods, such as Transformers, face challenges due to their high computational complexity. To address these challenges, we present the Multimodal Wind Speed Inpainting Dataset (MWSID), which integrates 12 auxiliary forecasting variables to support real-time OSWS inpainting. Based on MWSID, we propose the MMamba framework, combining the Multimodal Feature Extraction module, which uses mutual information (MI) theory to optimize feature selection, and the OSWS Reconstruction module, which employs Attention-Mamba-2 within a Residual-in-Residual-Dense architecture for efficient OSWS inpainting. Experiments show that MMamba outperforms MambaIR (state-of-the-art) with an RMSE of 0.5481 m/s and an SSIM of 0.9820, significantly reducing RMSE by 21.10% over Kriging and 8.22% over MambaIR in high-winds (>15 m/s). We further introduce MMamba-L, a lightweight 0.22M-parameter variant suitable for resource-limited devices. These contributions make MMamba and MWSID powerful tools for OSWS inpainting, benefiting extreme weather prediction and oceanographic research. Full article

This study evaluates the capabilities of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Hyperion remote sensing sensors for mapping ophiolitic sequences and identifying manganese mineralization in the Bela Ophiolite region, located along the axial fold–thrust belt northwest of Karachi, Pakistan. The study area comprises tholeiitic basalts, gabbros, mafic and ultramafic rocks, and sedimentary formations where manganese occurrences are associated with jasperitic chert and shale. To delineate lithological units and Mn mineralization, advanced image processing techniques were applied, including band ratio (BR), Principal Component Analysis (PCA), and Spectral Angle Mapper (SAM) on visible and near-infrared (VNIR) and shortwave infrared (SWIR) bands of ASTER. Using these methods, gabbros, basalts, and mafic-ultramafic rocks were effectively mapped, and previously unrecognized basaltic outcrops and gabbroic outcrops were also discovered. The ENVI Spectral Hourglass Wizard was used to analyze the hyperspectral data, integrating the Minimum Noise Fraction (MNF), Pixel Purity Index (PPI), and N-Dimensional Visualizer to extract the spectra of end-members associated with Mn-bearing host rocks. In addition, the Hyperspectral Material Identification (HMI) tool was tested to recognize Mn minerals. The remote sensing results were validated by petrographic analysis and ground-truth data, confirming the effectiveness of these techniques in ophiolite mapping and mineral exploration. This study shows that ASTER band combinations (3-6-7, 3-7-9) and band ratios (1/4, 4/9, 9/1 and 3/4, 4/9, 9/1) provide optimal results for lithological discrimination. The results show that remote sensing-based image processing is a powerful tool for mapping ophiolites on a regional scale and can help geologists identify potential mineralization zones in ophiolitic sequences. Full article

Monitoring freshwater resources is essential for assessing the impacts of drought, water management and global warming. Spaceborne LiDAR altimeters allow researchers to obtain water height information, while water area and precipitation data can be obtained using different satellite systems. In our study, we examined 5 years (2018–2022) of data concerning the Euphrates–Tigris Basin (ETB), one of the most important freshwater resources of the Middle East, and the water bodies of both the ETB and the largest lake of Türkiye, Lake Van. A multi-sensor study aimed to detect and monitor water levels and water areas in the water scarcity basin. The ATL13 product of the Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) was used to determine water levels, while the normalized difference water index was applied to the Sentinel-2 optical imaging satellite to monitor the water area. Variations in both water level and area may be related to the time series of precipitation data from the ECMWF Reanalysis v5 (ERA5) product. In addition, our results were compared with global HydroWeb water level data. Consequently, it was observed that the water levels in the region decreased by 5–6 m in many reservoirs after 2019. It is noteworthy that there was a decrease of approximately 14 m in the water level and 684 km² in the water area between July 2019 and July 2022 in Lake Therthar. Full article

Bathymetry, the measurement of water depth and underwater terrain, is vital for scientific, commercial, and environmental applications. Traditional methods like shipborne echosounders are costly and inefficient in shallow waters due to limited spatial coverage and accessibility. Emerging technologies such as satellite imagery, drones, and spaceborne LiDAR offer cost-effective and efficient alternatives. This research explores integrating multi-sensor datasets to enhance bathymetric mapping in coastal and inland waters by leveraging each sensor’s strengths. The goal is to improve spatial coverage, resolution, and accuracy over traditional methods using data fusion and machine learning. Gülbahçe Bay in İzmir, Turkey, serves as the study area. Bathymetric modeling uses Sentinel-2, Göktürk-1, and aerial imagery with varying resolutions and sensor characteristics. Model calibration evaluates independent and integrated use of single-beam echosounder (SBE) and satellite-based LiDAR (ICESat-2) during training. After preprocessing, Random Forest and Extreme Gradient Boosting algorithms are applied for bathymetric inference. Results are assessed using accuracy metrics and IHO CATZOC standards, achieving A1 level for 0–10 m, A2/B for 0–15 m, and C level for 0–20 m depth intervals. Full article

Surface soil moisture (SSM) is a critical land surface parameter affecting a wide variety of economically and environmentally important processes. Spaceborne microwave remote sensing has been extensively employed for monitoring SSM. Active microwave sensors offering high spatial resolution are typically utilized to capture dynamic fluctuations in soil moisture, albeit with low temporal resolution, whereas passive sensors are typically used to monitor the absolute values of large-scale soil moisture, but offer coarser spatial resolutions (~10 km). In this study, a passive microwave observation system using an X-band microwave radiometer mounted on a drone was established to obtain high-resolution (~1 m) radiative brightness temperature within the observation region. The region was a control experimental field established to validate the proposed approach. Additionally, machine learning models were employed to invert the soil moisture. Based on the site-based validation the trained inversion model performed well, with estimation accuracies of 0.74 and 2.47% in terms of the coefficient of determination and the root mean square error, respectively. This study introduces a methodology for generating high-spatial resolution and high-accuracy soil moisture maps in the context of precision agriculture at the field scale. Full article