Search Results (267)

The newly discovered Caijiagou gold deposit is hosted in metasedimentary rocks of the Silurian Taiyangsi Formation in the West Qinling Orogen (WQO), central China. Three mineralization stages are recognized: (1) the quartz–sericite–pyrite stage (Stage I), characterized by fine-grained, disseminated pyrite (Py1) and arsenopyrite (Apy1) with trace amounts of native gold; (2) the main ore-stage, the quartz–polymetallic sulfide–ankerite stage (Stage II), which contains coarse-grained euhedral pyrite (Py2) and arsenopyrite (Apy2) intergrown with ankerite and native gold; and (3) the post-ore calcite stage (Stage III), which is barren. Hydrothermal alteration assemblages include silicification, sericitization, pyritization, and carbonatization. In situ trace element analyses show that gold is mainly hosted in Py2 (avg. 2.86 ppm Au) and Apy2 (avg. 1.95 ppm Au), with consistently low Co/Ni ratios (<0.6) in ore-stage sulfides, supporting a metamorphic fluid origin. Sulfur isotope values (δ³⁴S = +6.47‰ to +11.96‰) point to sulfur derived from thermochemical reduction of marine sulfate. Apatite from the main ore stage (Stage II) yields a U–Pb lower intercept age of 237 ± 4.3 Ma (MSWD = 0.89), placing the mineralization in the Middle Triassic (Indosinian orogeny). These results are consistent with a sediment-hosted orogenic gold model, and the geochemical and geochronological signatures provide insights into the ore-forming process and regional metallogeny of the WQO. Full article

The Hailijin uranium (U) deposit is one of the super-large U-deposits recently discovered in the Qianjiadian ore field, southwestern Songliao Basin. The ore bodies are mainly hosted in the lower member sandstones of the Upper Cretaceous Yaojia Formation and occur as multilayered tabular bodies. The nature and source of the ore-forming fluids remain unclear, limiting the understanding of the genetic type of the deposit. This study integrated drill-core observation, mineralogy, whole-rock geochemistry, in situ pyrite trace elements and sulfur isotopes, fluid-inclusion, and Raman spectroscopy to constrain ore-forming fluids. The host sandstones experienced hematitization, limonitization, carbonate cementation, clay alteration, sulfidation and bleaching. Pitchblende and coffinite occur as submicron grains in dissolution pores of quartz and feldspar, on clay-mineral surfaces and within mobile organic matter (OM), commonly associated with pyrite and sphalerite. The ores and gray mineralized sandstones are enriched in U, Mo, Re, Co, Ni, Zn and Pb, and syn-ore pyrite shows positive correlations between U and As, Mo, Cu, Zn, Se and Sb. Mineralization-related fluid-inclusion assemblages occur mainly in syn-ore dolomite/ankerite cements and in secondary trails along microfractures in detrital quartz; they yield homogenization temperatures of 130–190 °C and salinities of 3–8 wt.% NaCl eq., higher than the normal burial temperature of the basin (80–90 °C), especially meteoric fluid. Raman and gas-chromatographic analyses indicate carbonaceous matter, CH₄, CO₂, H₂ and minor O₂. Pyrite δ³⁴S values of −49.24‰ to −23.1‰ indicate isotopically light reduced sulfur ultimately related to microbial sulfate reduction and/or thermal decomposition of sulfur-bearing OM, whereas thermochemical sulfate reduction was unlikely to be dominant. Therefore, the ore-forming fluid is interpreted as a low-temperature, low-salinity organic-rich fluid, most likely derived from U-enriched source rocks at depth, and the uranium mineralization is closely associated with the exudation of such deep-derived organic fluids. Full article

The Lower Cretaceous volcanic–sedimentary succession in the Dehui Graben of the southern Songliao Basin preserves critical records of syn-rift volcanism and basin filling in NE China. This study presents an integrated dataset of zircon cathodoluminescence (CL) imaging, LA-ICP-MS U-Pb geochronology, trace-element geochemistry, and LA-MC-ICP-MS Lu-Hf isotopic analyses for four representative Yingcheng Formation samples collected from three boreholes (D102, D21, and D83) in the Dehui Graben. Zircon grains from samples S1 (gray crystal-vitric tuff, Well D102, 3050.5 m) and S3 (gray tuff, Well D21, 2287 m) are predominantly euhedral to subhedral with well-developed oscillatory zoning, elevated Th/U ratios (>0.4), and chondrite-normalized REE patterns characterized by depletion in light REEs, enrichment in heavy REEs, and pronounced negative Eu anomalies, all of which are diagnostic of a magmatic origin. The 37 zircon analyses from S1 yield ²⁰⁶Pb/²³⁸U ages ranging from 109 to 122 Ma, with a KDE peak at ~116 Ma and two inherited grains at 158 Ma and 262 Ma, whereas the 43 analyses from S3 define a narrow age population between 110 and 123 Ma with a KDE peak at ~114 Ma and a single inherited grain at 145 Ma. Together, these ages constrain Yingcheng Formation felsic volcanism in the Dehui Graben to the Aptian stage of the Early Cretaceous. In marked contrast, the 54 zircon analyses from S2 (dark gray crystal-rich tuff, Well D21, 2288 m) exhibit a polymodal distribution dominated by an Early Jurassic population (KDE peak ~181 Ma), with subordinate Permian–Triassic (~251 Ma) and Carboniferous (~325 Ma) components and a complete absence of Cretaceous-aged zircons. We interpret this population entirely as inherited (xenocrystic) zircons entrained from conduit wall rocks during the incipient phase of volcanic eruption. Notably, S2 and S3 were collected from the same well at depths separated by only 1 m, yet they display fundamentally contrasting zircon age spectra. This abrupt vertical discontinuity is consistent with a two-phase eruptive model in which an early xenocryst-rich volcaniclastic unit (S2), possibly related to conduit-wall entrainment during the initial eruptive stage, was rapidly followed by a juvenile magma-derived tuff (S3). Sample S4 (gray coarse sandstone, Well D83, 3273 m) contains 84 detrital zircon grains spanning 112 to 440 Ma, with a dominant Early Jurassic peak (~179 Ma) that correlates with widespread granitoids in the Zhangguangcai Range and a youngest single-grain age of 110.5 Ma that constrains the maximum depositional age of the Yingcheng Formation. All 86 zircon Lu-Hf analyses yield positive εHf(t) values (+0.8 to +9.2), with two-stage Hf model ages (TDM2) clustering between 536 and 1100 Ma and peaking at ~700–800 Ma (Neoproterozoic). These data indicate that the parental magmas were predominantly derived from partial melting of Neoproterozoic juvenile crust extracted from a depleted mantle source. Among the four samples, S3 records the highest mean εHf(t) (+7.1) and the youngest mean TDM2 (~672 Ma), which may indicate a relatively stronger depleted-mantle affinity during the extensional stage at ca. 114 Ma. The positive εHf(t) values of the ~181 Ma S2 xenocrysts further imply that the Early Jurassic magmatic event in this region also sampled juvenile Neoproterozoic crust, which thus served as the common source basement for both episodes of magmatism. A regional compilation reveals a systematic north-to-south younging trend of syn-rift volcanism across the Songliao Basin (Yingtai ~119 Ma, Dehui ~115 Ma, Wangfu ~110 Ma), with the Dehui Graben occupying a critical intermediate position that is consistent with the southeastward migration of back-arc extension possibly related to Paleo-Pacific slab rollback. Full article

The Shiganghe tungsten–tin deposit and the Tiechang tin deposit are located in the northern part of the Baoshan Block, approximately 25 km apart. They were formed in the Late Cretaceous and Early Oligocene, respectively, and exhibit distinct deposit characteristics. This study presents a comparative analysis of in situ trace elements and S-Pb isotopes of pyrite from the two deposits to trace the sources of ore-forming fluids and materials and to further constrain the evolution of the metallogenic setting in the Baoshan Block. The trace element compositions of pyrite from the Shiganghe tungsten–tin deposit differ significantly from those of the Tiechang tin deposit. The former is relatively enriched in Se, Al, and W, while the latter contains relatively high concentrations of Cu, As, Sb, Pb, Bi, and Ag. The sulfur isotopic compositions of pyrite from the Shiganghe deposit are lower than those from the Tiechang deposit, with δ³⁴S_CDT values ranging from 2.11‰ to 6.86‰ and 6.74‰ to 8.72‰, respectively. The two deposits share consistent lead isotopic ratios, characterized by a mixture of upper crustal and orogenic belt sources. Therefore, the mineralization of the Shiganghe tungsten–tin deposit may be related to deep seated, concealed Late Cretaceous magmatism. Relatively oxidized and W-rich magmatic fluids contributed to tungsten–tin mineralization that characterized by a zoning pattern of “tungsten above and tin below”. In contrast, the Tiechang tin deposit is likely associated with coeval leucogranites present in the shear tectonic zone near Caojian. The ore-forming fluids underwent long distant migration with extensive crustal contamination, resulting in a relatively reduced hydrothermal system. Combined with the regional geological setting, the mineralization of the Shiganghe tungsten–tin deposit and the Tiechang tin deposit records the geological event from Neo-Tethys Ocean subduction to the collisional orogeny between the Indian and Eurasian blocks. The ore-forming materials originated from a mixture of upper crustal materials and orogenic belt materials. Full article

The Donggou Pb-Zn deposit in the Qimantagh region is stratabound, with ore bodies occurring as stratoid and lenticular forms within clastic rocks and andesites of the Qimantagh Group. To constrain the mineralization age, ore genesis, and ore-forming conditions, this study conducted zircon U-Pb dating, sulfur isotope analysis, and LA-ICP-MS trace element analysis of sphalerite. Zircon U-Pb dating of the overlying andesite yields an age of 437.1 ± 1.9 Ma, which provides an upper age constraint for mineralization. Sulfur isotope values (δ³⁴S range from −5.98‰ to +12.01‰) suggest a mixed sulfur source, dominated by magmatic sulfur with a minor seawater contribution. Trace element analysis of sphalerite (Sp1) shows enrichment in Fe, Mn, Co, Cd, and In, and depletion in Ni, Ga, and Ge. The estimated mineralization temperature, based on the sphalerite geothermometer, is approximately 327–344 °C. Volcanic rocks in the deposit are mainly andesite with minor dacite and rhyolite, indicating an island arc setting, and the clastic rocks point to a continental arc provenance and a shallow marine environment. Collectively, these features suggest that the Donggou Pb-Zn deposit is a VMS-type deposit formed during the late subduction stage of the Qimantagh Ocean. This study provides new constraints on the Early Silurian Pb-Zn mineralization in the Qimantagh region and has implications for exploration targeting in similar volcanic-hosted settings. Full article

Lead isotope ratios are frequently used in archaeometric provenance analysis; however, the overlap of isotopic fields within the Andean metallogenic belt complicates reliable provenance determination. This study presents a reproducible fidelity-based kernel method for the unsupervised clustering of Andean lead-isotope data and investigates whether a quantum-mechanical similarity space can reveal geologically significant structures beyond the classical Euclidean partition. A dataset of 1522 measurements of ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb was analyzed using a fidelity-based quantum kernel based on a three-qubit Pauli feature map and compared with classical K-means clustering, Gaussian mixture models, and Ward’s agglomerative clustering under various preprocessing strategies and cluster counts. The optimal quantum kernel setup achieved the highest silhouette score at k = 2. However, because analytical uncertainties were not consistently reported across all the compiled sources, an uncertainty-weighted similarity could not be applied. Geological insights indicate that this binary division separates less radiogenic, arc-related compositions from more radiogenic and thorogenic crustal signatures, a contrast that broadly follows the west-to-east crustal-contamination gradient across the Andes. Conversely, the traditional four-cluster approach provides more detailed subdivisions that align with the previously identified isotopic provinces. The reported separation reflects the geometry of the quantum feature space rather than any hardware-level speed-up, as this work represents only a simulation approach. Overall, these findings support a hierarchical and complementary approach to analyzing Pb isotope origins, in which quantum kernel clustering provides robust large-scale separation and classical clustering enhances regional understanding. Full article

Heavy metal (HM) contamination in urban soils is a pressing global issue, particularly in rapidly industrializing regions like Kazakhstan, where anthropogenic activities such as transportation, energy production, and manufacturing exacerbate accumulation in ecosystems. In Almaty, the largest city in Kazakhstan, urban expansion and legacy pollution pose risks to soil functions, biodiversity, and public health through bioaccumulation and migration pathways. This study evaluates the spatial distribution and ecological impacts of total heavy metal concentrations (HMs) (Pb, Cd, As, Zn, Cu, Ni, Co, Mo, Mn) in Almaty’s soils to inform remediation strategies. Soil samples (n = 73) were collected using a systematic grid sampling method across urban, industrial, and peri-urban zones in Almaty. HM concentrations were determined via X-ray fluorescence spectrometry (XRF) following GOST 33850-2016 standards. Pollution indices (contamination factor K_c and integrated pollution index Z_c) were calculated relative to Kazakhstani permissible limits (PDK RK) and Russian approximate permissible concentrations (ODK RF). Statistical analyses included Spearman’s correlation, boxplots, and coefficient of variation. Morphological, physicochemical (pH, humus content), and biological assessments evaluated degradation. Spatial interpolation via GIS mapped the hotspots. HM distributions showed significant variability, with As, Zn, and Ni exceeding norms in >90% of samples (median K_c ≈ 5 for As). Z_c classified >70% of sites as hazardous or extremely hazardous (Z_c > 32), with hotspots in central-eastern districts (Z_c 90–145). Strong correlations (ρ ≥ 0.6) identified a technogenic group (Pb–Zn–Cu–Ni) from traffic and industry, contrasting predominantly geogenic elements with possible anthropogenic contribution (As–Co–Mo–Mn). Pollution induced soil compaction, reduced humus/pH, and disrupting biogeochemical cycles. Local exceedances were noted near TECs, factories, and transport hubs. Almaty’s soils exhibit pervasive technogenic HM pollution, driven by urban sources, leading to ecosystem degradation and health risks. Future research should incorporate vertical profiling and isotopic sourcing for refined risk models. Prioritized monitoring and phytoremediation in hotspots are recommended to enhance resilience, aligning with UN SDGs for sustainable cities and ecosystems. Future research should incorporate vertical profiling and isotopic sourcing for refined risk models. Full article

The Huomaxie granite in Ningdu, southern Jiangxi Province, is located in the central part of the Cathaysia Block. Previous studies assigned this pluton to the Huitong batholith as S-type granite, but lacked precise geochronological and petrogenetic constraints. This paper presents systematic petrography, whole-rock geochemistry, zircon U–Pb dating, in situ Hf isotopic analysis, and electron microprobe analysis (EPMA) of muscovite from the muscovite monzogranite of the pluton. The weighted mean ²⁰⁶Pb/²³⁸U age is 420.1 ± 3.1 Ma. The rocks are silicic, high-K calc-alkaline, and peraluminous S-type granites. Zircon ε_Hf(t) values range from −15.0 to −11.8, with two-stage Hf model ages (T_DM2) of 2360–2150 Ma. Geochemical characteristics and muscovite composition data indicate that the magma was derived from high-temperature partial melting of psammitic sedimentary rocks. Tectonic discrimination diagrams suggest that the pluton formed in a post-orogenic extensional setting. It was generated by lower crustal melting induced by asthenospheric upwelling. Full article

The Dadonggou Mo deposit in Western Hebei, within the Yanshan–Liaoning Mo metallogenic belt, is a newly recognized medium-sized porphyry Mo system. Exploration has delineated 126 orebodies, most of which are blind, with identified resources of ~22,000 t Mo at an average grade of 0.071% Mo. Integrated lithogeochemistry, zircon U-Pb chronology, molybdenite Re-Os geochronology, quartz fluid-inclusion microthermometry, and H-O-S isotope analyses constrain the mineralization age, ore-fluid evolution, and sources of ore-forming materials. The zircon U-Pb dating of the ore-bearing granite porphyry and quartz porphyry from the Dadonggou molybdenum deposit yields ages ranging from 135.8 Ma to 141.5 Ma. The low Ti content in zircons indicates that they are super-wet magmatic rocks. The magmatic evolution experienced a change in oxygen fugacity from oxidizing to reducing conditions, which facilitated the initial enrichment of molybdenum. Molybdenite yields a Re-Os isochron age of 135.9 ± 4.0 Ma and a weighted mean model age of 134.2 ± 1.6 Ma, indicating Early Cretaceous mineralization. Ore fluids evolved from an early CO₂-H₂O-NaCl system with relatively high temperature and salinity to a later H₂O-NaCl system with lower temperature and salinity. Isotopic data indicate progressive meteoric-water incorporation into dominantly magmatic fluids. Sulfur isotopes and high Re contents in molybdenite indicate a mixture of mantle magma mixed with some seawater. Lower late-stage trapping pressures record post-ore depressurization and hydrothermal-system shallowing. Full article

The Nam Xan gold deposit is located in the central Truong Son Fold Belt of Laos. It is a newly identified distal intrusion-related gold system (IRGS) in a continental arc setting. This study uses whole-rock geochemistry, Pb and S isotope systematics, and mineral-scale analyses to trace magmatic evolution and ore-forming processes. Whole-rock data indicate that the associated intrusive suite is a calc-alkaline volcanic-arc granite (VAG) series, derived from a subduction-modified mantle source with notable crustal contributions. Pb isotopes reveal mixing arrays rather than true isochrons. Monte Carlo modeling shows binary mantle–crust mixing for igneous rocks and ternary mixing with an additional radiogenic component in ore samples, indicating enhanced fluid–rock interaction during mineralization. Sulfur isotope data show a shift from magmatic sulfur (δ³⁴S ≈ −5‰) in early skarn-stage pyrite to heavier values (δ³⁴S ≈ +6‰) in gold-bearing stages, reflecting fluid evolution driven by cooling and redox changes. Mineral chemistry data demonstrate that gold is present both as invisible gold within arsenian pyrite and as free gold in late-stage fractures. Strong correlations between Au and As, along with elevated Co/Ni ratios and enrichments in Bi, W, and F, collectively support a magmatic-hydrothermal origin. These findings define a three-stage mineralization process: an initial phase involving high-temperature magmatic fluids, a main stage characterized by sulfidation and gold deposition, and a final stage marked by polymetallic overprinting. The Nam Xan deposit is therefore interpreted as the distal manifestation of a Permian arc-related magmatic system in which magmatic fluids migrated along structural conduits and precipitated gold through interaction with carbonate host rocks. The identification of these intrusions in the distal IRGS at Nam Xan informs regional exploration models in the Truong Son Fold Belt, demonstrating the potential of carbonate platforms near Permian intrusions for future mineral exploration. Full article

Radon (²²²Rn) is a noble, radioactive gas and tends to be accumulated in poorly ventilated enclosed spaces. Mainly due to its radioactive daughters and the α-particles emitted, ²²²Rn poses a risk of cancer and therefore its concentration in air and water should be kept under certain reference levels. Several methods have been developed to accurately measure ²²²Rn concentration in water, using α, β or γ counting. A well-established, but not the only, method involves γ-spectroscopy using a High-Purity Germanium (HPGe) detector to identify the ²²²Rn decay isotopes ²¹⁴Pb and ²¹⁴Bi, assuming they are in secular equilibrium with ²²²Rn. This technique requires costly, bulky equipment due to the HPGe’s operation at −196 °C and the need for substantial shielding. The present study introduces a more affordable and compact device, utilizing CdZnTe (CZT) crystals, which provide exceptional energy resolution in the 300 to 600 keV range, with nearly eight times the Full Width at Half Maximum (FWHM) of HPGe. Four stacked CZT detectors, each containing a 0.5 cm³ crystal, were compared with measurements from an HPGe detector. Water samples were collected from boreholes and taps in a region where radon concentration in water ranged from 10 to 900 Bq/L. The results are promising for samples around 100 Bq/L, considering the potential advancements of the device with larger CZT detectors. Additionally, the method has the potential for in situ use due to its handheld capability. Full article

The Dajing giant Cu–Sn polymetallic deposit is located in the Cu–Sn–Ag–Pb–Zn polymetallic belt of the southern Great Xing’an Range, NE China. Research on its ore genesis is of great significance for understanding Sn polymetallic mineralization in this region. In this study, pyrite, arsenopyrite, and sphalerite were analyzed by electron-microprobe analysis (EMPA) and in situ S–Pb isotope analysis. Previously published fluid-inclusion microthermometric and H–O isotope data were also incorporated to constrain fluid evolution and ore genesis. Both in situ S and Pb isotopic compositions fall within short ranges. The δ³⁴S values suggest a sulfur reservoir with possible magmatic contribution, whereas Pb isotopes indicate a mainly crustal Pb signature in an orogenic setting. Arsenopyrite records variations in As, S, Fe, and Co contents from core to rim. The Co-rich core shows Co enrichment accompanied by Fe depletion, consistent with Co-for-Fe isomorphous substitution. These features indicate changes in local fluid chemistry during arsenopyrite growth. Sulfur isotope geothermometry based on coexisting late-stage pyrite–sphalerite pairs yields 118–233 °C, with an average of 159 ± 49 °C, indicating medium- to low-temperature hydrothermal activity during the late sulfide stage. The Dajing deposit is interpreted as a fault-controlled hydrothermal vein-type Cu–Sn polymetallic deposit formed in a Late Jurassic extensional setting. Ore precipitation was likely promoted by cooling during upward fluid migration away from the magmatic heat source, pressure release, meteoric-water mixing, and fluid–rock interaction with granitic rocks and Linxi Formation wall rocks. This study provides mineral-scale constraints on fluid evolution and ore genesis in the Great Xing’an metallogenic belt. Full article

The Shizui Cu–Pb–Zn deposit is located in central Jilin Province. It sits at the tectonic junction between the eastern Xing’an–Mongolia Orogenic Belt (XMOB) and the northeastern North China Craton (NCC). This is the first discovered Paleozoic Cu-polymetallic deposit in the region. Our study combines detailed geological investigation with systematic fluid inclusion analysis. We analyzed samples from four distinct paragenetic stages. Analytical methods include microthermometry, laser Raman spectroscopy, and hydrogen-oxygen isotope analysis. These data constrain the source, evolution, and precipitation mechanisms of the ore-forming fluids. The results delineate a clear evolutionary path: the ore-forming fluid originated as a high-temperature (346–437 °C), high-salinity (up to 51.68 wt.% NaCl equiv.) NaCl–H₂O–CO₂ system during the early quartz-sulfide stage (Stage I, Quartz ± Arsenopyrite ± Pyrite Stage), as evidenced by the coeval presence of high-salinity S-type and CO₂-rich C-type inclusions, indicating fluid immiscibility. The fluid then evolved into a boiling, medium temperature to high temperature (262–355 °C), high-salinity NaCl–H₂O system during the later part of early quartz-sulfide stage (Stage II, Quartz-Cu Polymetallic Sulfide Stage), a transition marked by the common coexistence of liquid-rich (L-type) and vapor-rich (V-type) inclusions with similar homogenization temperatures. This phase separation (boiling) served as the primary trigger for the massive deposition of chalcopyrite, arsenopyrite, and pyrite. Subsequently, the system cooled and diluted, transforming into a medium- to low-temperature (182–275 °C), low-salinity, partially homogeneous NaCl–H₂O system in the late quartz-sulfide stage (Stage III, Quartz-Pb-Zn Polymetallic Sulfide Stage). Finally, in the quartz-carbonate stage (Stage IV, Quartz-Carbonate Stage), the fluid temperature further decreased, resulting in a low-temperature (128–211 °C), low-salinity, homogeneous NaCl–H₂O system. Hydrogen-oxygen isotope data show that the calculated δ¹⁸O_H2O values decreased from +6.6‰ to +6.7‰ in Stage I to +3.4‰ to +3.9‰ in Stage II, and further to −0.4‰ in Stage III, while the δD values shifted from −91.6‰ to −90.6‰, to −94.4‰ to −94.2‰, and finally to −95.7‰. This trend indicates that the initial magmatic fluid progressively mixed with meteoric water. The geological characteristics, spatial association with Hercynian biotite monzogranite, developed skarn alteration, and the documented fluid evolution trajectory collectively affirm that the Shizui deposit is a typical skarn-type system. The deposit shares significant similarities in mineralization conditions, age, and tectonic setting with the skarn-type Tianbaoshan Pb–Zn–Cu–Mo deposits in the western segment of the XarMoron–Changchun Metallogenic Belt (XCMB). This correlation strongly suggests that the Paleozoic XCMB extends eastward and holds considerable potential for the discovery of late Paleozoic skarn-type Cu-polymetallic deposits in its eastern part. Full article

The southern margin of the Beishan orogen is a key region hosting mafic–ultramafic intrusions and Cu-Ni sulfide deposits, yet previous studies have focused mainly on the Xinjiang segment, leaving the eastern extension in Gansu Beishan poorly constrained. To constrain the emplacement age, tectonic setting and assimilation–contamination of the mafic–ultramafic intrusions in the Chengxuan area, and to address the research gaps regarding Cu-Ni sulfide mineralization and magmatic evolution, this study conducted systematic petrographic, geochronological, and whole-rock geochemical and isotopic analyses of the Chengxuanbei intrusions. The intrusions are dominated by olivine gabbro and gabbro facies, with the sulfides predominantly hosted in the olivine gabbro and gabbro; zircon U-Pb dating yields a weighted mean age of 283.5 ± 0.85 Ma, corresponding to the Early Permian. The rocks exhibit pronounced negative Nb-Ta and moderate negative Zr-Hf anomalies, indicating magma derivation from partial melting of the mantle wedge metasomatized by subduction fluids, and high-field-strength element diagrams reveal an island arc calc-alkaline basalt affinity, reflecting a subduction-related extensional setting (e.g., back-arc extension) during the Early Permian. The Sr-Nd-Hf isotopes suggest crustal contamination during magma ascent, while the δ³⁴S values indicate input of crust-derived sulfur; the olivine Fo values (79.8–81.0) and Ni contents (573–1320 ppm) indicate sulfide saturation and Ni extraction processes. A regional correlation confirms that the Chengxuanbei intrusion has favorable magmatic Cu-Ni metallogenic conditions and great exploration potential, providing pivotal theoretical support for Early Permian Cu-Ni prospecting in the southern Beishan belt. Full article

The giant Dulong Sn-Zn polymetallic deposit, located in the eastern part of the southeastern Yunnan metallogenic belt, is a world-class ore system. Despite extensive research on the source of tin and its mineralization processes, the specific ore-related intrusion and the source of copper remain highly debated. Recent deep exploration has revealed a deep-seated granite porphyry, yet its geochronological and geochemical characteristics, along with its genetic link to mineralization, are poorly constrained. This study presents new zircon U-Pb age, whole-rock geochemistry, and Sr-Nd-Hf isotopic compositions of this granite porphyry, integrated with a regional comparison to multi-phase Laojunshan granites. LA-ICP-MS zircon U-Pb dating yields a Late Cretaceous age of 85.1 ± 1.2 Ma. The Dulong granite porphyry is strongly peraluminous and high-K calc-alkaline to shoshonitic, exhibiting typical S-type granite affinities with enrichment in Rb, U, and Ta, as well as depletions in Ba, Sr, Nb, and Eu. Isotopic signatures (ε_Nd(t) = −12.5 to −12.0, t_DM2(Nd) = 1.87 to 1.91 Ga; zircon ε_Hf(t) = −10.24 to −1.44, t_DM2(Hf) = 1.24 to 1.79 Ga) suggest that the parental magma was derived from the partial melting of ancient crust, with possible minor input of mantle-derived components in an extensional tectonic setting. The Dulong granite porphyry represents a moderate-to-high temperature, reduced, and highly evolved magmatic system. Notably, its high concentrations of Sn, W, Zn, and Cu indicate that the parental melt was metal-rich, possessing potential for Sn and Cu mineralization. Accordingly, future exploration should prioritize areas characterized by well-developed granite porphyry dykes, skarn–wallrock contact zones, and deep-seated structural intersections. Full article