Search Results (147)

This study presents the design and application of an electrochemical sensor for selective detection of lead ions (Pb²⁺) based on ionophore-modified raspberry-like Fe₃O₄–Au nanostructures. The material was engineered with a magnetic Fe₃O₄ core, coated with polyethyleneimine (PEI) to facilitate nucleation, and subsequently decorated with Au nanoparticles, providing a raspberry-like (Fe₃O₄@PEI@AuNPs) nanostructure with high surface area and excellent electrochemical conductivity. Surface functionalization with Lead Ionophore IV (ionophore thiol) introduced Pb²⁺-selective binding sites, whose presence and structural evolution were verified by TEM and Raman spectroscopy. The Fe₃O₄ core endowed strong magnetic properties, enabling facile manipulation and immobilization onto screen-printed carbon electrodes (SPCEs) via physical adsorption, while the Au nanoparticles enhanced electron transfer, supplied thiol-binding sites for stable ionophore anchoring, and increased the effective electroactive surface area. Operational conditions were systematically optimized, with acetate buffer (HAc/NaAc, pH 5.7) and chronoamperometric preconcentration (CA) at −1.0 V for 175 s identified as optimal for differential pulse voltammetry (DPV) measurements. Under these conditions, the sensor exhibited a linear response toward Pb²⁺ from 0.025 mM to 2.00 mM with superior sensitivity and reproducibility compared to conventional AuNP-modified SPCEs. Furthermore, the ionophore-modified Fe₃O₄–Au nanostructure-based sensor demonstrated outstanding selectivity for Pb²⁺ over competing heavy metal ions (Cd²⁺, Hg²⁺, Cr³⁺), owing to the specific coordination interaction of Lead Ionophore IV with target ions. These findings highlight the potential of raspberry-like Fe₃O₄@PEI@AuNP nanostructures as a robust and efficient electrochemical platform for the sensitive and selective detection of toxic heavy metal ions. Full article

SPCEs are crucial for electrochemical sensing because of their portability, low cost, disposability, and ease of mass production. This study details their manufacture, surface modifications, electrochemical characterization, and use in chemical and biosensing. SPCEs integrate working, reference, and counter electrodes on PVC or polyester substrates for compact sensor design. Surface modifications, such as plasma treatment (O₂, Ar), nanomaterial addition (AuNPs, GO, CNTs), polymer coatings, and MIPs, enhance performance. These changes improve sensitivity, selectivity, stability, and electron transport. Electrochemical methods such as CV, DPV, SWV, and EIS detect analytes, including biomolecules (glucose, dopamine, and pathogens) and heavy metals (Pb²⁺, As³⁺). Their applications include healthcare diagnostics, environmental monitoring, and food safety. Modified SPCEs enable rapid on-site analysis and offer strong potential to transform our understanding of the physical world. Full article

The development of dielectric capacitors with high energy-storage density and ultrafast discharge capability is essential for next-generation pulsed power systems. In this work, (Pb, La, Ho, Zr, Ti)O₃ (PLZTH) ceramics were fabricated via medium-temperature sintering (950–1100 °C) combined with Ho³⁺ doping to systematically tailor their energy-storage properties. This processing strategy not only mitigates Pb volatilization but also enhances compatibility with base-metal electrodes such as Ni and Cu. In addition, Ho³⁺ ions exhibit amphoteric doping behavior, which contributes to the enhancement of relaxor characteristics and grain refinement. H4 ceramic delivers an outstanding recoverable energy-storage density (W_rec) of 0.91 J/cm³ and a high energy efficiency (η) of 87% under 216 kV/cm, along with a power density (P_D) of 28.8 MW/cm³ and an ultrafast discharge time (t_0.9) of only 4.97 ns at 180 kV/cm. This study not only proposes a viable route toward high-performance medium-temperature-sintered PLZT ceramics but also elucidates the effective mechanism of Ho³⁺ amphoteric doping in modulating the relaxor state and properties of perovskite-based ceramics. Full article

Uric acid (UA) detection is critical for human health monitoring, necessitating the development of electrochemical sensing electrodes suitable for physiological environments. This study evaluated four 2D conductive metal–organic frameworks (2D c-MOFs), namely Cu-HHTP, Ni-HHTP, Cu-HAB, and Ni-HAB, which share identical graphene-like 2D sheet structures but differ in π-conjugation extent and catalytic active centers [MX₄] (M = Cu or Ni; X = O or NH) as electrosensing electrodes. Electrochemical sensing performance was compared by detecting UA in phosphate-buffered saline (PBS). Herein, the Ni-HHTP electrode demonstrated superior sensitivity (6.79 μA·μM⁻¹·cm⁻²), the lowest oxidation potential (0.272 V), and the lowest detection limit (0.44 μM). Langmuir adsorption isotherm analysis revealed that the Ni-HHTP electrode possesses the highest surface coverage (Γ_A) (5061.16 pmol cm⁻²) and the most favorable Gibbs adsorption free energy (ΔG°) (−18.775 kJ mol⁻¹), indicating its strongest UA adsorption capacity and molecular interaction. This enhanced performance is attributed to the optimal synergy between [NiO₄] catalytic centers and extended ligand π-conjugation, facilitating greater analyte adsorption and electron transfer efficiency. This work establishes clear structure–performance relationships for 2D c-MOF electrodes in UA detection, providing key insights for designing advanced electrosensing materials. Full article

This work examines the possibility of using a PbO₂-based electrode doped with the rare-earth metal holmium in the field of oxygen evolution and the development of an efficient method for the degradation of acetamiprid. Acetamiprid is a widely used insecticide and, as such, it very often reaches waterways, where it can cause many problems for wildlife and the environment. X-ray powder diffraction analysis, Raman spectroscopy, and energy-dispersive X-ray spectroscopy results confirmed the structure of Ti/SnO₂-Sb₂O₃/Ho-PbO₂, while the morphology of its surface was investigated by scanning electron microscopy with energy-dispersive X-ray spectroscopy. Ti/SnO₂-Sb₂O₃/Ho-PbO₂ showed good OER activity in alkaline media with a Tafel slope of 138 mV dec⁻¹. The Ti/SnO₂-Sb₂O₃/Ho-PbO₂ electrode shows very good efficiency in removing acetamiprid. By optimizing the degradation procedure, the following operating conditions were obtained: a current density of 20 mA cm⁻², a pH value of the supporting electrolyte (sodium sulfate) of 2, and a concentration of the supporting electrolyte of 0.035 M. After optimization, the maximum efficiency of removing acetamiprid (10 mg L⁻¹, 4.5 × 10⁻⁵ mol) from water was achieved, 96.8%, after only 90 min of treatment, which represents an efficiency of 1.125 mol cm⁻² of the electrode. Additionally, it was shown that the degradation efficiency is strictly related to the concentration of the treated substance. Full article

Excessive levels of Pb²⁺ and Cd²⁺ in seawater pose significant combined toxicity to marine organisms, resulting in harmful effects and further threatening human health through biomagnification in the food chain. Traditional methods for detecting marine Pb²⁺ and Cd²⁺ rely on laboratory analyses, which are hindered by limitations such as sample degradation during transport and complex operational procedures. In this study, we present an electrochemical sensor based on intelligent mobile detection devices. By combining G-COOH-MWCNTs/ZnO with differential pulse voltammetry, the sensor enables the efficient, simultaneous detection of Pb²⁺ and Cd²⁺ in seawater. The G-COOH-MWCNTs/ZnO composite film is prepared via drop-coating and is applied to a glassy carbon electrode. The film is characterized using cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy, while Pb²⁺ and Cd²⁺ are quantified using differential pulse voltammetry. Using a 0.1 mol/L sodium acetate buffer (pH 5.5), a deposition potential of −1.1 V, and an accumulation time of 300 s, a strong linear correlation was observed between the peak response currents of Pb²⁺ and Cd²⁺ and their concentrations in the range of 25–450 µg/L. The detection limits were 0.535 µg/L for Pb²⁺ and 0.354 µg/L for Cd²⁺. The sensor was applied for the analysis of seawater samples from Maowei Sea, achieving recovery rates for Pb²⁺ ranging from 97.7% to 103%, and for Cd²⁺ from 97% to 106.1%. These results demonstrate that the sensor exhibits high sensitivity and stability, offering a reliable solution for the on-site monitoring of heavy metal contamination in marine environments. Full article

Creatinine serves as a crucial diagnostic biomarker for assessing kidney disease. This work developed portable non-enzymatic and multienzyme-modified electrochemical biosensors for the detection of creatinine based on commercial screen-printed carbon electrodes (SPCEs). The non-enzymatic creatinine sensor was constructed by the electrochemical deposition of AuNPs onto the surface of a pre-activated SPCE by electrochemical activation, followed by the surface modification of a Nafion membrane. The developed AuNPs/SCPE exhibited excellent reproducibility, and the proposed Nafion/AuNPs/SPCE sensor showed excellent detection sensitivity and selectivity toward creatinine. In comparison, the enzymatic creatinine biosensor was gradually established by the electrodeposition of a Prussian blue (PB) membrane on the optimal AuNPs/SCPE surface, followed by multi-enzyme cascade modification (which consisted of creatinine amidohydrolase (CA), creatine oxidase (CI) and sarcosine oxidase (SOx)) and drop-casting the Nafion membrane to stabilize the interface. The introduction of a PB interlayer acted as the redox layer to monitor the generation of hydrogen peroxide (H₂O₂) produced by the enzymatic reaction, while the Nafion membrane enhanced the detection selectivity toward creatine, and the multi-enzyme cascade modification further increased the detection specificity. Both non-enzymatic and enzymatic creatinine sensors could detect the lowest concentrations of less than or equal to 10 μM. In addition, the efficiency and reproducibility of the proposed composite biosensor were also confirmed by repetitive electrochemical measurements in human serum, which showed a positive linear calibration relation of peak currents versus the logarithm of the concentration between 10 μM and 1000 μM, namely, i_p (μA) = −7.06 lgC (μM) −5.30, R² = 0.996. This work offers a simple and feasible approach to the development of enzymatic and non-enzymatic creatinine biosensors. Full article

For relaxor ferroelectric single crystal (1 − x)Pb(Mg_1/3Nb_2/3)O₃ − xPbTiO₃ (PMN-PT), through reasonable component regulation and electric field polarization, an orthogonal mm² point group structure can be obtained, which has high piezoelectric constants and is, therefore, a desired substrate material for lateral-field-excited (LFE) bulk acoustic wave (BAW) devices. In this work, acoustic wave resonance characteristics of (zxt) 45° PMN-PT BAW devices with LFE are investigated. Firstly, Mindlin first-order plate theory is used to obtain vibration governing equations of orthorhombic crystals excited by a lateral electric field. By analyzing the electrically forced vibrations of the finite plate, the basic vibration characteristics, such as motional capacitance, resonant frequency, and mode shape are obtained, and influences of different electrode parameters on resonance characteristics of the device are investigated. In addition, the effects of the structure parameters on the mass sensitivity of the devices are analyzed and further verified by FEM simulations. The model presented in this study can be conveniently used to optimize the structural parameters of LFE bulk acoustic wave devices based on orthorhombic crystals, which is crucial to obtain good resonance characteristics. The results provide an important basis for the design of LFE bulk acoustic wave resonators and sensors by using PMN-PT orthorhombic crystals. Full article

This study presents the fabrication of a samarium-doped Ti/Sb-SnO₂/PbO₂ electrode and investigates its applications in polluted water treatment and energy conversion. Physicochemical properties were characterized by scanning electron microscopy with energy-dispersive X-ray spectroscopy, X-ray powder diffraction analysis, and Raman spectroscopy. The Ti/Sb-SnO₂/Sm-PbO₂ electrode showed 2.5 times higher oxygen evolution potential activity than the Ti/Sb-SnO₂/PbO₂ electrode. Density Functional Theory was used to conduct first-principles calculations, and the obtained results indicated that Sm doping enhances the production of reactive oxygen species. The application of the Ti/Sb-SnO₂/Sm-PbO₂ electrode in carbendazim (CBZ) removal was investigated, since CBZ is a fungicide whose presence in the environment, including food, water, and soil, poses a threat. After 60 min of the treatment under optimized working parameters, the degradation rate of CBZ reached 94.2% in the presence of 7.2 g/L Na₂SO₄ with an applied current density of 10 mA/cm² in an acidic medium (pH 4). Of the four investigated parameters, the current density had the most significant influence on the degradation process. At the same time, the initial pH value of the solution was shown to have the least impact on degradation efficiency. These results imply a potential use of the proposed treatment for CBZ removal from wastewater. Full article

Excessive levels of heavy metal pollutants in the environment pose significant threats to human health and ecosystem stability. Consequently, the accurate and rapid detection of heavy metal ions is critically important. A AgNPs@CeO₂/Nafion composite was prepared by dispersing nano-ceria (CeO₂) in a Nafion solution and incorporating silver nanoparticles (AgNPs). The morphology, microstructure, and electrochemical properties of the modified electrode materials were systematically characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and cyclic voltammetry (CV). By leveraging the oxygen vacancies and high electron transfer efficiency of CeO₂, the strong adsorption capacity of Nafion, and the superior conductivity of AgNPs, an AgNPs@CeO₂/Nafion/GCE electrochemical sensor was developed. Under optimized conditions, trace Pb²⁺ in water was detected using square wave anodic stripping voltammetry (SWASV). The sensor demonstrated a linear response for Pb²⁺ within the concentration range of 1–100 μg·L⁻¹, with a detection limit of 0.17 μg·L⁻¹ (S/N = 3). When applied to real water samples, the method achieved recovery rates between 93.7% and 110.3%, validating its reliability and practical applicability. Full article

Flow injection analysis (FIA) is widely used in drug screening, neurotransmitter detection, and water analysis. In this study, we investigated the electrochemical sensing performance of glassy graphene electrodes derived from pyrolyzed positive photoresist films (PPFs) via rapid thermal annealing (RTA) on SiO₂/Si and polycrystalline diamond (PCD). Glassy graphene films fabricated at 800, 900, and 950 °C were characterized using Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) to assess their structural and morphological properties. Electrochemical characterization in phosphate-buffered saline (PBS, pH 7.4) revealed that annealing temperature and substrate type influence the potential window and double-layer capacitance. The voltammetric response of glassy graphene electrodes was further evaluated using the surface-insensitive [Ru(NH₃)₆]^3+/2+ redox marker, the surface-sensitive [Fe(CN)₆]^3−/4− redox couple, and adrenaline, demonstrating that electron transfer efficiency is governed by annealing temperature and substrate-induced microstructural changes. FIA with amperometric detection showed a linear electrochemical response to adrenaline in the 3–300 µM range, achieving a low detection limit of 1.05 µM and a high sensitivity of 1.02 µA cm⁻²/µM. These findings highlight the potential of glassy graphene as a cost-effective alternative for advanced electrochemical sensors, particularly in biomolecule detection and analytical applications. Full article

Removing high-concentration organic dye from wastewater is of great concern because the hazards can cause serious damage to the environment and human health. In this study, the hybrid dimensionally stable anode (DSA) with a Ce-doped and SnO₂-Sb₂O₅ intermediate layer was fabricated and used for the electro-catalytic oxidation of three kinds of ultra-high-concentration organic dyes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) confirmed the denser surface structure and morphology of the composite Ti/SnO₂-Sb₂O₅/Ce-PbO₂ electrode. Moreover, the electrode exhibited an excellent oxygen evolution potential of 1.58 V. The effect on the removal efficiencies of high concentrations of up to 1 g/L of methyl orange, methylene blue, and neutral red solutions with the above composite electrode was investigated. The research results illustrated that target molecules in the three different dye solutions were rapidly decolorized and decomposed by electro-catalytic oxidation in less than 35 min. Additionally, the degradation process still followed pseudo-first-order kinetics for high-concentration dye solutions. The removal efficiency of Total Organic Carbon (TOC) and Chemical Oxygen Demand (COD) for the three dye solutions was more than 98%, and the results of the gas chromatography–mass spectrometry (GC-MS) analysis showed that it had the best degradation effects for neutral red, which decomposed more thoroughly. More than 80 h of accelerated life also revealed excellent performance of the composite electrode in the face of high-concentration dye solution degradation. Considering these results, the Ti/SnO₂-Sb₂O₅/Ce-PbO₂ anode could be utilized to treat wastewater containing high-concentration dyes with high efficiency. Full article

The recycling of spent automotive batteries is essential for minimizing their environmental impact. This requires eco-innovative methods with low cost and energy use. The present study explores the recycling of battery electrodes through the melt quenching method, a process that incorporates spent anode and cathode plates into a vitreous host matrix. Samples with the xCuO·10Sb₂O₃·(90 − x)[4PbO₂·Pb] composition, where x = 0 to 30 mol% CuO, were prepared by the melt quenching method. The XRD analysis indicates the vitroceramic structures of the obtained samples. Thus, the presence of varied crystalline phases such as Pb₂(SO₄)O, PbSO₄, and metallic Pb was detected. The SEM micrographs highlighted heterogeneous regions within the samples and showed a decreases of the size of crystallites with increased dopant concentrations. IR and UV-Vis spectra suggest that the copper ions act as network modifiers, creating bond defects and free oxygen ions, and yielding a reduction of the optical bandgap energy at higher dopant contents. EPR data show that the shape of the resonance lines and the coordination geometry of the Cu²⁺ ions are influenced by the dopant concentrations. The analysis of the voltammetric data indicates that doping the recycled material with 20 mol% CuO and 10 mol% Sb₂O₃ eliminates the process of hydrogen evolution and reduces the anodic electrode passivation. Full article

This study investigated the morphological dependence of ZnO nanostructures, specifically nanotube- and nanorod-based electrodes, on their electrochemical performance for the detection of lead ions (Pb²⁺) in aqueous solutions. The results demonstrate that ZnO nanotubes exhibit significantly enhanced sensitivity compared to nanorods during CV measurements. During SWV measurements, the sensitivity (116.79 mA·mM⁻¹) and a lower limit of detection of 0.0437 μM were determined. The hollow, high-aspect-ratio structure of nanotubes provides a larger active surface area and facilitates better ion accessibility, resulting in superior electron transfer efficiency and catalytic activity. These results underscore the critical role of morphology in optimizing ZnO-based sensors. Analysis of real water samples from various natural reservoirs revealed no detectable lead, while lead was identified exclusively in artificially prepared samples containing water exposed to lead hunting shot. Over a 30-day period, the sensor retained over 95% of its initial performance when stored under vacuum conditions, demonstrating minimal signal degradation. Under ambient conditions, stability loss was attributed to moisture adsorption on the porous nanostructure. The sensor also displayed outstanding reproducibility, with current response variations across multiple probes remaining within 4%. The cost-effective and simple fabrication process of ZnO nanostructures further highlights their potential for scalable production, environmental monitoring, and integration into portable sensing devices. Full article

Piezoelectric materials (PZTs) enjoy extensive applications in the field of electromechanical sensors due to their sensitive response to external electric fields. The limited piezoelectric response for single-layer piezoceramic pellets drives the use of multilayered technology to increase the electric displacement of a single piezo device. As is well known, Ag is commonly used as a metal for electrodes in devices based on traditional PZTs, which always densify at a high temperature above 1100 °C, resulting in Ag migration. Here, a high-performance samarium-ion-doped Sm_0.01Pb_0.99(Zr_0.54Ti_0.46)O₃ ceramic was selected as parent materials to develop a new Ag-cofired ceramic matrix with a sintering temperature of 920 °C by glass flux. The ceramic composition with 2.0 wt% glass addition exhibits the excellent performance of piezoelectric d₃₃~492 pC/N, planar electromechanical coupling coefficient k_p~50.1%, mechanical quality factor Q_m~68.71, and Curie temperature T_c~356 °C, respectively. The cyclic stability of d₃₃ was measured below 6.6% at 30 kV/cm, which indicates that the piezoceramic has good temperature stability and fatigue resistance. Therefore, this study provides a novel high-performance piezoelectric system to meet the cofired requirement for multilayered piezoelectric devices. Full article