Search Results (40)

Urban parks are essential to sustainable cities, providing climate regulation, supporting biodiversity, and offering vital spaces for recreation and overall well-being. At the same time, their soils can act as long-term reservoirs for persistent organic pollutants (POPs), reflecting decades of atmospheric deposition, diffuse urban emissions, and historical land-use practices. This review synthesises current knowledge on the occurrence, sources, and environmental behaviour of priority POPs, including OCPs, PCBs, PCDD/Fs, PBDEs, PFAS, and PAHs, in the soils of urban parks and gardens worldwide. Evidence from multiple regions reveals consistent patterns: urban parks accumulate complex mixtures of legacy and emerging contaminants, reflecting both historical inputs and ongoing urban activities. These contaminants primarily contribute to scenarios of chronic, low-level exposure through the ingestion of soil and dust, inhalation of resuspended particles, dermal contact, and, in some cases, dietary intake when food is cultivated in contaminated park soils. While such exposure pathways have been associated with a range of adverse health outcomes in toxicological and epidemiological studies, the presence of POPs in park soils does not imply that urban parks represent hazardous environments. Instead, it emphasises the importance of proportionate, evidence-based assessments within spaces that yield substantial net benefits to public health. Despite growing research interest, significant gaps remain, including limited understanding of mixture toxicity, insufficient data on temporal trends, a lack of harmonised monitoring strategies, and the absence of exposure scenarios specifically tailored to recreational soils. This review also examines major international and European regulatory frameworks and soil-quality guideline approaches relevant to urban and recreational soils, identifying mismatches between scientific evidence and regulatory practice. By integrating perspectives from environmental chemistry, toxicology, urban ecology, and policy, this review highlights the importance of targeted monitoring and context-specific management strategies to ensure that urban parks remain safe, healthy, and equitable components of increasingly complex urban landscapes. Full article

There is an urgent need to develop sustainable approaches for the remediation of contaminated soil as well as to promote sustainable practices for waste management. Here, we provide the first evaluation of the performance of two types of iron nanoparticles (NA and NH) obtained from olive mill wastewater for the remediation of an acidic multi-contaminated soil, including metal(loid)s, PCBs, and a flame retardant (TCPP). Their efficiency was then compared against that of a commercial nanoscale zero-valent iron (NS) through a one-month microcosm experiment employing two doses of each nanomaterial. The impact of the treatments on key soil physicochemical properties, metal(loid) availability, PCB and TCPP concentrations, and soil phytotoxicity was assessed. All treatments reduced soil acidity. Regarding organic contaminants, bioremediation of TCPP was enhanced by all nanomaterials, particularly NH, whereas NA was the only treatment that significantly reduced PCB concentration under the tested conditions. NS achieved the highest rates of metal(loid) immobilization (63–100%); NH was most beneficial for soil fertility and immobilized As, Ni, and Pb (100, 38, and 53%, respectively), whereas NA was only effective for Pb (21–49%). The low dose of both NA and NH improved the germination index (66 and 61%, respectively), reducing soil phytotoxicity. These results highlight the potential of valorizing olive mill wastewater for soil remediation, thereby contributing to the principles of the Circular Economy. Full article

The widespread use of antibiotics, combined with pervasive exposure to diverse environmental media, has intensified the global challenge of antibiotic resistance. Accumulating evidence reveals that beyond direct antibiotic pressure, residual non-antibiotic chemicals—despite lacking intrinsic antibacterial activity—can significantly promote the enrichment and spread of antibiotic resistance genes (ARGs) in farmland soils through indirect mechanisms such as inducing oxidative stress, altering microbial community structure, and enhancing both vertical and horizontal gene transfer. To address this issue, the present study investigates the influence of representative non-antibiotic contaminants commonly detected in agricultural environments—including pesticides (e.g., Omethoate, imidacloprid, and atrazine), industrial pollutants (e.g., PCB138, BDE47, benzo [a] pyrene, 2,3,7,8-tetrachlorodibenzo-p-dioxin [TCDD], and benzene), plastic-associated compounds (e.g., Polyethylene trimer, phthalates, and tributyl acetylcitrate), and ingredients from personal care products (e.g., triclosan and bisphenol A)—on ARG transmission dynamics. Leveraging bioinformatics resources such as the CARD database, PDB, AlphaFold, and molecular sequence analysis tools, we identified relevant small-molecule ligands and macromolecular receptors to construct a simulation system modeling ARG transfer pathways. Molecular docking and molecular dynamics (MD) simulations were then implemented, guided by a Plackett–Burman experimental design, to systematically evaluate the impact of individual and co-occurring pollutants. The resulting data were processed using advanced analytical tools, and MD trajectories were interpreted at the molecular level across three scenarios: an unperturbed (blank) system, single-pollutant exposures, and dual-pollutant combinations. By integrating computational simulations with machine learning approaches, this work uncovers the “co-selection” effect exerted by non-antibiotic chemical residues in shaping the environmental resistome, thereby providing a mechanistic and scientific basis for comprehensive risk assessment of agricultural non-point source pollution and the development of effective soil health management and antimicrobial resistance containment strategies. Full article

This study examines the impact of an unintended fire at the Drava International plastic processing facility near Osijek, Croatia, on soil quality and the potential human health risks associated with agricultural soils within a 10 and 20 km radius. Surface soil samples (0–5 cm) were collected from ten locations within 10 km three days after the incident, and eight composite samples were taken from sites 10–20 km away 17 days’ post-event. Additionally, 18 control samples previously collected for soil fertility or quality monitoring were included for comparative analysis. In total, 36 agricultural soil samples were analyzed for pH, organic matter, total phosphorus, potassium, calcium, magnesium, and trace elements (Cr, Co, Ni, Cu, Zn, As, Pb). Eighteen post-fire samples were also analyzed for polycyclic aromatic hydrocarbons (PAHs), dioxins, and perfluoroalkyl substances (PFAS). Ecological risk was assessed using the pollution load index (PLI) and enrichment factor (EF), while human health risk was evaluated through the estimation of incremental lifetime cancer risk (ILCR) and individual carcinogenic risks (CRi) for As, Cr, Ni, and Pb. Results showed that concentrations of dioxins (TEQ LB and UB), dioxin-like PCBs, and non-dioxin-like PCBs in samples within 10 km were either below detection limits or present in trace amounts (4.0 × 10⁻⁶ mg/kg). PFAS compounds were not detected (<0.0005 mg/kg). The total concentration of non-dioxin-like PCBs ranged from 0.0023 to 0.0047 mg/kg, well below the maximum permissible levels. Post-fire contamination profiles revealed consistently higher PAH concentrations in the 0–10 km zone (mean 0.100 mg/kg) compared to the 10–20 km zone (mean 0.062 mg/kg). Twenty PLI values exceeded the threshold of 1 (range: 1.00–1.26), indicating moderate pollution, while the remaining values (PLI 0.82–0.99) suggested no pollution. EF values indicated minimal to moderate enrichment (EF < 2), supporting the conclusion that metal presence was predominantly geological with limited anthropogenic influence. All ILCR values for adults and children remained below the acceptable threshold of 1 × 10⁻⁴, indicating low carcinogenic risk under both pre- and post-fire conditions. CRi values followed a consistent decreasing trend across exposure pathways: ingestion > dermal absorption > inhalation. Full article

The main objective of this study was to select indigenous fungal species suitable for the potential mycoremediation of the soils polluted by organic pollutants. As a sampling area, Litvínov City (North Bohemia, Czech Republic) was selected. The city is characterized by intensive coal mining, coal processing, and the chemical industry, predominantly petrochemistry. The elevated contents of persistent organic pollutants (POPs) such as polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were identified in urban soils due to the long-term industrial pollution. The results confirmed elevated contents of PAHs in all the analyzed soil samples with high variability ranging between 0.5 and 23.3 mg/kg regardless of the position of the sampling area on the city map. PCBs and PCDD/Fs exceeded the detection limits in the soil at the sampling points, and several hotspots were revealed at some locations. All the sampling points contained a diverse community of saprotrophic and mycorrhizal fungi, as determined according to abundant basidiomycetes. Fungal species with a confirmed ability to degrade organic pollutants were found, such as species representing the genera Agaricus from the Agaricaceae family, Coprinopsis from the Psathyrellaceae family, Hymenogaster from the Hymenogasteraceae family, and Pluteus from the Pluteaceae family. These species are accustomed to particular soil conditions as well as the elevated contents of the POPs in them. Therefore, these species could be taken into account when developing potential bioremediation measures to apply in the most polluted areas, and their biodegradation ability should be elucidated in further research. The results of this study contribute to the investigation of the potential use of fungal species for mycoremediation of the areas polluted by a wide spectrum of organic pollutants. Full article

Polychlorinated biphenyls (PCBs) are synthetic organic compounds that were widely used in industrial applications throughout the 20th century. Due to their chemical stability, resistance to degradation and ability to bioaccumulate and biomagnify through food chains, PCBs pose long-term environmental and health risks. Due to these characteristics, PCBs have been globally regulated as persistent organic pollutants (POPs), despite being banned from production in most countries decades ago. This study investigates temporal trends in PCB contamination in urban soils of Bucharest over a 20-year period (2002–2022), focusing on six principal congeners (PCB 28, 52, 101, 138, 153, and 180) sampled from 13 locations, including roadsides and urban parks. Gas chromatography and spatial analysis using inverse distance weighting (IDW) revealed a marked reduction in Σ6PCB concentrations, declining from 0.0159 mg/kg in 2002 to 0.0065 mg/kg in 2022, with statistically significant differences confirmed by Kruskal–Wallis analysis (p < 0.05). This decline is primarily attributed to reduced emissions, source control measures, and natural attenuation. However, the persistence of PCBs in localized hotspots is influenced by secondary dispersion mechanisms, such as atmospheric deposition and surface runoff, which redistribute contaminants rather than eliminate them. Health risk assessments via ingestion, dermal absorption, and inhalation routes confirmed negligible carcinogenic risk for both adults and children. Although measurable progress has been achieved, the persistence of localized contamination underscores the need for targeted remediation strategies and sustained environmental monitoring to protect vulnerable urban areas from recontamination. Full article

Heavy metal-organic pollutants compound pollution at industrial legacy sites and have caused damage to the ecological environment and human health during recent decades. In view of the difficulty and high cost of post-contamination remediation, it is worth studying, and practically applying, cutoff walls to reduce the spread of pollution in advance. In this study, field-scale studies were carried out at e-waste dismantling legacy sites in Taizhou, Zhejiang Province of China, through the process of site investigation, numerical simulation, and cutoff wall practical application. Firstly, the concentrations and spatial distributions of Pb, Cd and polychlorinated biphenyls (PCBs) and poly brominated diphenyl ethers (PBDEs) were identified in both soil and groundwater. Then, potential dispersal routes of key combined contaminants (Pb and PCBs) at the soil–groundwater interface were systematically studied through numerical simulation applying Visual MODFLOW-MT3DMS. One site was chosen to predict the barrier effect of differently sized cutoff walls based on the migration path of compound pollutants. A protocol for a cutoff wall (50 m length × 2 m width × 3 m height) was finally verified and applied at the real contaminated site for the blocking of compound pollutant diffusion. Further, the groundwater quality of the contaminated site was monitored consecutively for six months to ensure the durability and stability of barrier measures. All pollutant indicators, including for Pb and PCB complex pollutants, were reduced to below the national Grade IV groundwater standard value, achieving environmental standards at these polluted sites and providing possibilities for land reuse. In summary, this field-scale test provided new ideas for designing cutoff walls to block the diffusion of complex pollutants; it also laid a basis for the practical application of cutoff walls in pollution prevention and control of complex contaminated sites and for soil–groundwater environmental protection at industrial heritage sites. Full article

Hexachlorobenzene (HCB) is one of the most persistent environmental pollutants of global concern. Ni/Fe nanoparticles, with their small particle size, large surface area, and high reactivity, are a promising candidate for HCB degradation. In this work, we investigated the kinetics and products of the dechlorination of HCB by Ni/Fe nanoparticles and how the presence of heavy metal ions Cd(Ⅱ) and Zn(Ⅱ) influences the reaction. It is found that 400 μg/L HCB can be rapidly removed by 7.5 g/L Ni/Fe nanoparticles and the removal percentage reaches 99% in 48 h. The removal is facilitated by adsorption and sequential dechlorination of HCB, producing PCB, 1,2,3,4-TeCB, and 1,2,3-TCB as the main products, with 1,2,3,5/1,2,4,5-TeCB, 1,2,4-TCB, and 1,2-DCB as the minor products. The addition of heavy metal ions Cd(Ⅱ) and Zn(Ⅱ) does not significantly affect the removal rate of HCB but hinders the adsorption and degradation of the byproducts through competitive adsorption. Additionally, the concentration of both Cd(Ⅱ) and Zn(Ⅱ) decreases rapidly and achieves over 98% removal in 4 h. Our study reveals that Ni/Fe nanoparticles can remove HCB and heavy metals Cd(Ⅱ) and Zn(Ⅱ) concurrently, with the extent of HCB dechlorination reduced compared to that without heavy metal. These findings may inform the application of Ni/Fe nanoparticles in the treatment of water bodies and soil contaminated by both halogenated aromatics and heavy metal. Full article

This study examines the environmental impacts of informal e-waste recycling processes in Agbogbloshie, Ghana, which is one of the most notorious e-waste recycling sites in sub-Saharan Africa. Despite being unsafe and unorganized, the informal sector is still actively involved in dismantling, extracting, and disposing of e-waste in unauthorized locations on a considerably large scale. However, the academic research on the environmental consequences of informal recycling practices is limited. Soil and groundwater samples for five important and representative informal e-waste recycling processes and one related oil process were collected and analyzed to determine heavy metal-, PBDEs, PCBs, CBs, and PAHs concentrations. Contamination indices were used to assess and compare the effects of informal recycling processes, thereby providing a geochemical evaluation of soil conditions. As a result, the manual dismantling of CRT and ICT devices is the major source of heavy metal pollution. Furthermore, the burning of e-waste plastic for waste reduction purposes and the oil collection process substantially contribute to the input of organic pollutants. Regulatory measures for CRT and ICT recycling would result in an 85% reduction of heavy metals and the enforcement of a compulsory collection system for plastic and oil would eliminate 86% of the organic pollutants. Full article

Most organic pollutants are serious environmental concerns globally due to their resistance to biological, chemical, and photolytic degradation. The vast array of uses of organic compounds in daily life causes a massive annual release of these substances into the air, water, and soil. Typical examples of these substances include pesticides, polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). Since they are persistent and hazardous in the environment, as well as bio-accumulative, sensitive and efficient extraction and detection techniques are required to estimate the level of pollution and assess the ecological consequences. A wide variety of extraction methods, including pressurized liquid extraction, microwave-assisted extraction, supercritical fluid extraction, and subcritical water extraction, have been recently used for the extraction of organic pollutants from the environment. However, subcritical water has proven to be the most effective approach for the extraction of a wide range of organic pollutants from the environment. In this review article, we provide a brief overview of the subcritical water extraction technique and its application to the extraction of PAHs, PCBs, pesticides, pharmaceuticals, and others form environmental matrices. Furthermore, we briefly discuss the influence of key extraction parameters, such as extraction time, pressure, and temperature, on extraction efficiency and recovery. Full article

This paper aims to assess the pollution by determining the sources of persistent organic pollutants (POPs) in 22 rural Roma communities in Transylvania in order to assess the human health risk associated with this exposure. For this, 16 polycyclic aromatic hydrocarbons (PAHs), 20 organochlorine pesticides (OCPs) and 12 polychlorinated biphenyls (PCBs) were determined in 22 soil samples collected from selected areas by gas chromatography coupled with mass spectrometry for PAHs and with electron capture detector for all halogenated compounds. Target compounds were isolated from soil by ultrasound-assisted extraction. We found that POP concentrations in soil ranged from 4.86 to 451.85 ng/g dw for PAHs, from 25.62 to 139.30 ng/g dw for OCPs, and from 0.22 to 49.12 ng/g dw for PCBs. The diagnostic ratios Ʃ_LMW/Ʃ_HMW, ANT/(ANT + PHE), and FLT/(FLT + PYR) strongly suggest a pyrogenic model of PAHs, such as biomass, coal, and petroleum combustion, while the isomer ratios Ʃ_DDT/Ʃ_HCH, α-HCH/γ-HCH and (DDE + DDD)/Ʃ_DDT suggest that OCP residues originate from their ancient uses. Non-carcinogenic (HI) and carcinogenic (CR) risks of these organic compounds present in the soil through non-dietary pathways were in the very low-risk category (ranging from 10⁻⁸ to 10⁻⁴), indicating an absence of these risks from the investigated POPs in the studied area. Full article

With the popularization and high-intensity utilization of greenhouse cultivation for crops growth, the pollution of greenhouse soils has been of concern. Therefore, a national-scale survey was conducted to investigate the contamination status, sources, influence factors and the risks of polychlorinated biphenyls (PCBs) and hexachlorobutadiene (HCBD) in greenhouse and nearby open-field soils. Contents of PCBs ranged from <LOD to 673.78 ng/g (mean: 77.38 ng/g) in greenhouse soils, and <LOD to 552.53 ng/g (mean: 61.90 ng/g) in open-field soils. HCBD was detected in all greenhouse soils with content ranging from 0.85 to 24.18 ng/g (mean: 8.33 ng/g), and a range of <LOD-20.19 ng/g (mean: 6.39 ng/g) in open-field soils. The sources of PCBs were the disposal of electrical equipment, domestic coal, wood burning emissions, etc. Levels of PCBs and HCBD were not correlated with the soil properties but positively correlated with Pseudomonas as the PCBs-degrader in open-field soils. Although the higher values of mean contents were found in greenhouses, the health risks of ΣPCBs in open-field soils were higher than in greenhouse soils due to the higher percentages of high-toxicity PCBs, especially the carcinogenic risks to children (>10⁻⁶). This study provided a full insight on the contamination status and risks of PCBs and HCBD when guiding greenhouse agriculture activities. Full article

Fluvial sediment recycling in agronomy is a relatively recent development, as sediment fertilizing potential for crops is unexplored. Freshwater sediments can act as fertilizer and improve the aeration of soils to increase the yield of crops, support vegetation for landscaping, and provide protective cover against erosion. This study focuses on the investigation of the agronomic potential of Usumacinta River sediments. The pH of the sediments is around 8.5, which is slightly alkaline. The organic matter content is low (5.7%). The sodium absorption ratio is 1.2 and the electrical conductivity is low (0.02 mS/cm). These values indicate that sediments are nonsaline, which is essential for the growth of crops and vegetation. The environmental characteristics of sediments show that the heavy metals, polycyclic aromatic hydrocarbon (PAH), and polychlorinated biphenyl (PCB) pollutants in sediments are below the recommended thresholds. In addition, sediments from the Usumacinta River contain minerals such as potassium and iron oxides that are helpful in improving the biological and nutritional characteristics of the soil. Furthermore, the pH, granulometry, mineralogy, organic matter, and carbonate contents of the Usumacinta River sediments are similar to agronomic soils. The Usumacinta River sediment’s potential for agronomy was practically investigated by sowing ryegrass (Lolium perenne) in a greenhouse by using the local climatic conditions and mixing sediments with potting soil. Three soil compositions were used to evaluate the germination and growth of ryegrass. The soil compositions were 100% potting soil (C1), 50% sediments + 50% potting soil (C2), and 100% sediments (C3). The growth rate of ryegrass was evaluated by monitoring the increase in grass height and production of fresh biomass. The germination of ryegrass was similar in all three compositions. The growth of ryegrass and production of fresh biomass were the most significant with 100% potting soil (0.25 kg/m²), somewhat less with sediment mix (0.18 kg·m²), and were the least significant with 100% sediments (0.05 kg/m²). The mixture of potting soil and sediments shows similar growth to 100% potting soil. The ryegrass seed germination, growth, and production of fresh biomass with the mixture of sediments gave encouraging results, and underlined the potential of sediments for soil amendments for agronomy and protective developments, such as limiting riverbank erosion, gardening, and landscaping. Full article

Soils contaminated with polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), and dioxin-like (dl) polychlorinated biphenyls (PCBs), known as persistent organic pollutants (POPs), have garnered global attention because of their toxicity and persistence in the environment. The standard method for target analytes has been used; however, it is an obstacle in large-scale sample analysis due to the comprehensive sample preparation and high-cost instrumental analysis. Thus, analytical development of inexpensive methods with lower barriers to determine PCDDs/Fs and dl-PCBs in soil is needed. In this study, a one-step cleanup method was developed and validated by combining a multilayer silica gel column and Florisil micro-column followed by gas chromatography with triple quadrupole mass spectrometry (GC-QqQ-MS/MS). To optimize the separation and quantification of 17 PCDDs/Fs and 12 dl-PCBs in soils, the sample cleanup and instrumental conditions were investigated. For quantification method validation, spiking experiments were conducted to determine the linearity of the calibration, recovery, and method detection limit of PCDDs/Fs and dl-PCBs using isotopic dilution GC-QqQ-MS/MS. The applicability of the simultaneous determination of PCDDs/Fs and dl-PCBs was confirmed by the recovery of native target congeners and labeled surrogate congeners spiked into the quality-control and actual soil samples. The results were in good agreement with the requirements imposed by standard methods. The findings in this work demonstrated the high accessibility of the sample cleanup and analysis methods for the efficient determination of PCDDs/Fs and dl-PCBs in contaminated soils. Full article

To optimize the workflow of civil engineering construction in a harbour, this paper developed a framework of the contaminant leaching assessment carried out on the stabilized/solidified dredged soil material. The specimens included the sampled sediments collected from the in situ fieldwork in Arendal and Kongshavn. The background levels of the concentration of pollutants were evaluated to assess the cumulative surface leaching of substances from samples over two months. The contamination of soil was assessed using a structured workflow scheme on the following toxic substances, heavy metals—As, Pb, Cd, Cr, Hg, Ni, and Zn; organic compounds—PAH-16 and PCB; and organotin compounds—TBT. The numerical computation and data analysis were applied to the results of geochemical testing creating computerised solutions to soil quality evaluation in civil engineering. Data modelling enabled the estimation of leaching of the contaminants in one year. The estimated leaching of As is 0.9153 mg/m², for Ni—2.8178 mg/m², for total PAH-16 as 0.0507 mg/m², and for TBT—0.00061 mg/m² per year. The performance of the sediments was examined with regard to permeability through a series of the controlled experiments. The environmental engineering tests were implemented in the Swedish Geotechnical Institute (SGI) in a triplicate mode over 64 days. The results were compared for several sites and showed that the amount of As is slightly higher in Kongshavn than for Arendal, while the content of Cd, Cr, and Ni is lower. For TBT, the levels are significantly lower than for those at Arendal. The algorithm of permeability tests evaluated the safety of foundation soil for construction of embankments and structures. The optimized assessment methods were applied for monitoring coastal areas through the evaluated permeability of soil and estimated leaching rates of heavy metals, PHB, PACs, and TBT in selected test sites in harbours of southern Norway. Full article