Search Results (315)

Cloud detection is an indispensable step in satellite remote sensing of cloud properties and objects under the influence of cloud occlusion. Nevertheless, interfering targets such as snow and haze pollution are easily misjudged as clouds for most of the current algorithms. Hence, a robust cloud detection algorithm is urgently needed, especially for regions with high latitudes or severe air pollution. This paper demonstrated that the passive satellite detector Advanced Geosynchronous Radiation Imager (AGRI) onboard the FY-4A satellite has a great possibility to misjudge the dense aerosols in haze pollution as clouds during the daytime, and constructed an algorithm based on the spectral information of the AGRI’s 14 bands with a concise and high-speed calculation. This study adjusted the previously proposed cloud mask rectification algorithm of Moderate-Resolution Imaging Spectroradiometer (MODIS), rectified the MODIS cloud detection result, and used it as the accurate cloud mask data. The algorithm was constructed based on adjusted Fisher discrimination analysis (AFDA) and spectral spatial variability (SSV) methods over four different underlying surfaces (land, desert, snow, and water) and two seasons (summer and winter). This algorithm divides the identification into two steps to screen the confident cloud clusters and broken clouds, which are not easy to recognize, respectively. In the first step, channels with obvious differences in cloudy and cloud-free areas were selected, and AFDA was utilized to build a weighted sum formula across the normalized spectral data of the selected bands. This step transforms the traditional dynamic-threshold test on multiple bands into a simple test of the calculated summation value. In the second step, SSV was used to capture the broken clouds by calculating the standard deviation (STD) of spectra in every 3 × 3-pixel window to quantify the spectral homogeneity within a small scale. To assess the algorithm’s spatial and temporal generalizability, two evaluations were conducted: one examining four key regions and another assessing three different moments on a certain day in East China. The results showed that the algorithm has an excellent accuracy across four different underlying surfaces, insusceptible to the main interferences such as haze and snow, and shows a strong detection capability for broken clouds. This algorithm enables widespread application to different regions and times of day, with a low calculation complexity, indicating that a new method satisfying the requirements of fast and robust cloud detection can be achieved. Full article

The Geostationary Interferometric Infrared Sounder (GIIRS) on board FengYun-4B (FY-4B), a Chinese second-generation hyperspectral infrared, enables the provision of critical data for forecasting high-impact weather events such as typhoons. To evaluate the reliability of FY-4B/GIIRS data, this study conducted three comparative assimilation trials for both Typhoon Gaemi and Typhoon Doksuri, assimilating observations from the Infrared Atmospheric Sounding Interferometer (IASI), Advanced Microwave Sounding Unit-A (AMSU-A), and FY-4B/GIIRS, respectively. Results demonstrate that the assimilation of GIIRS observations yields more stable forecasts of the wind field at 300 hPa and 500 hPa compared to AMSU-A and IASI, with biases within ±6 m/s relative to NCEP FNL data. However, GIIRS assimilation produces systematic underprediction of vertical velocity, whereas AMSU-A forecasts align more closely with reanalysis. For track forecasts, the GIIRS-assimilated trajectory exhibits closer alignment with observations than AMSU-A and IASI experiments, maintaining biases below 50 km throughout 48 h forecast period of Gaemi. This study provides valuable experience for the application of FY-4B/GIIRS data assimilation. Full article

The Geostationary Interferometric Infrared Sounder (GIIRS) onboard the Fengyun-4B satellite plays a critical role in numerical weather prediction and extreme weather monitoring. To meet the requirements of quantitative remote sensing and high-precision operational applications for radiometric calibration accuracy, this study, based on pre-launch calibration experiments, conducts a novel modeling analysis of the coupling between stray radiation at the input side and the system’s nonlinearity, and proposes a correction method for nonlinear coupling errors. This method explicitly models and physically traces the calibration residuals caused by stray radiation introduced via non-nominal optical paths under the effect of system nonlinearity, which are related to the radiance of the observed target. Experimental results show that, within the brightness temperature range of 200–320 K, the calibration bias is reduced from approximately 0.7 to 0.3–0.4 K, with good consistency and stability observed across channels and pixels. Full article

Ocean surface wind fields are crucial for marine environmental research and applications in weather forecasting, ocean disaster monitoring, and climate change studies. However, traditional wind retrieval methods often struggle with modeling complexity and ambiguity due to the nonlinear nature of geophysical model functions (GMFs), leading to increased computational costs and reduced accuracy. To tackle these challenges, this study establishes a sea surface wind field retrieval model employing a backpropagation (BP) neural network, which integrates multi-angular observations from the Wind Radar (WindRAD) sensor aboard the Fengyun-3E (FY-3E) satellite. Experimental results show that the proposed model achieves high precision in retrieving both wind speed and direction. The wind speed model achieves a root-mean-square error (RMSE) of 1.20 m/s for the training set and 1.00 m/s for the selected test set when using ERA5 data as the reference, outperforming the official WindRAD products. For wind direction, the model attains an RMSE of 23.99° on the training set and 24.58° on the test set. Independent validation using Tropical Atmosphere Ocean (TAO) buoy observations further confirms the model’s effectiveness, yielding an RMSE of 1.29 m/s for wind speed and 24.37° for wind direction, also surpassing official WindRAD products. The BP neural network effectively captures the nonlinear relationship between wind parameters and radar backscatter signals, showing significant advantages over traditional methods and maintaining good performance across different wind speeds, particularly in the moderate range (4–10 m/s). In summary, the method proposed herein significantly enhances wind field retrieval accuracy from space; it has the potential to optimize satellite wind field products and improve global wind monitoring and meteorological forecasting. Full article

High-resolution numerical weather prediction requires accurate cloud microphysical initial conditions to enhance forecasting capabilities for high-impact severe weather events such as convective storms. This study integrated Fengyun-2 (FY-2) geostationary satellite data (equivalent blackbody temperature and total cloud cover) and next-generation 3D weather radar reflectivity from the China Meteorological Administration (CMA) to construct cloud microphysical initial fields and evaluate their impact on the CMA-MESO 3 km regional model. An analysis of the catastrophic rainfall event in Henan on 20 July 2021, and a 92-day continuous experiment (May–July 2024) revealed that assimilating cloud microphysical variables significantly improved precipitation forecasting: the equitable threat scores (ETSs) for 1 h forecasts of light, moderate, and heavy rain increased from 0.083, 0.043, and 0.007 to 0.41, 0.36, and 0.217, respectively, with average hourly ETS improvements of 21–71% for 2–6 h forecasts and increases in ETSs for light, moderate, and heavy rain of 7.5%, 9.8%, and 24.9% at 7–12 h, with limited improvement beyond 12 h. Furthermore, the root mean square error (RMSE) of the 2 m temperature forecasts decreased across all 1–72 h lead times, with a 4.2% reduction during the 1–9 h period, while the geopotential height RMSE reductions reached 5.8%, 3.3%, and 2.0% at 24, 48, and 72 h, respectively. Additionally, synchronized enhancements were observed in 10 m wind prediction accuracy. These findings underscore the critical role of cloud microphysical initialization in advancing mesoscale numerical weather prediction systems. Full article

Clouds are important for Earth’s energy budget and water cycles, and precisely characterizing their vertical structure is essential for understanding their impact. Although passive remote sensing offers broad coverage and high temporal resolution, sensor and algorithmic limitations impede the accurate depiction of cloud vertical profiles. To improve estimates of their key structural parameters, e.g., cloud top height (CTH) and cloud vertical extent (CVE), we propose a multi-source collaborative optimization algorithm. The algorithm synergizes the wide-coverage FY-4A (FengYun-4A) and DSCOVR (Deep Space Climate Observatory) cloud products with high-precision CloudSat vertical profile data and establishes LightGBM-based CTH/CVE optimization models. The models effectively reduce systematic errors in the FY-4A and DSCOVR cloud products, lowering the CTH Mean Absolute Error (MAE) to 1.8 km for multi-layer clouds, an improvement of 4–8 km over the original. The CVE MAEs for single- and multi-layer clouds are ~2.5 km. Some bias remains in complex cases, e.g., multi-layer thin clouds at low altitudes, and error tracing analysis suggests this may be related to cloud layer number misclassification. The proposed algorithm facilitates daytime near-hourly cloud retrievals over China and neighboring regions. Full article

Surface soil moisture (SM) is a critical factor in hydrological modeling, agricultural management, and numerical weather forecasting. This paper presents a highly effective soil moisture retrieval algorithm developed for the FY-3E (FengYun-3E) GNOS-R (GNSS Occultation Sounder II-Reflectometry) instrument. The algorithm incorporates a first-order vegetation model that considers vegetation density and volume scattering. Utilizing multi-angle GNOS-R observations, the algorithm derives surface reflectivity, which is combined with ancillary data on opacity, vegetation water content, and soil moisture from SMAP (Soil Moisture Active Passive) to optimize the retrieval process. The algorithm has been specifically tailored for different surface conditions, including bare soil, areas with low vegetation, and densely vegetated regions. The algorithm directly incorporates the angle-dependence of observations, leading to enhanced retrieval accuracy. Additionally, a new approach parameterizes surface roughness as a function of angle, allowing for refined corrections in reflectivity measurements. For vegetated areas, the algorithm effectively isolates the soil surface signal by eliminating volume scattering and vegetation effects, enabling the accurate estimation of soil moisture. By leveraging multi-angle data, the algorithm achieves significantly improved retrieval accuracy, with root mean square errors of 0.0235, 0.0264, and 0.0191 (g/cm³) for bare, low-vegetation, and dense-vegetation areas, respectively. This innovative methodology offers robust global soil moisture estimation capabilities using the GNOS-R instrument, surpassing the accuracy of previous techniques. Full article

The near-surface air temperature lapse rate (SATLR) is a crucial parameter in climate, hydrology, and ecology research conducted in mountainous regions. However, existing research has difficulty characterizing its dynamic changes on an hourly scale. Obtaining data with high spatiotemporal resolution in complex terrains using existing methods poses challenges. This study introduces a hierarchical method for estimating SATLR at high spatiotemporal resolutions based on Fengyun-4A (FY-4A) Advanced Geostationary Radiation Imager (AGRI) land surface temperature (LST) data and machine learning techniques. Based on reconstructed FY-4A AGRI LST data, this study downscales the 4 km resolution data to a 1 km resolution using machine learning. It then estimates the spatial distribution of near-surface air temperature (SAT) and normalized near-surface air temperature (nSAT) by integrating station observations. Subsequently, high spatiotemporal resolution SATLRs are estimated, and their spatial and temporal distribution characteristics in the Beijing–Tianjin–Hebei mountainous region are analyzed. The results indicate that the SATLR exhibits a predominant distribution of 2~6 °C/km annually across the study area. However, in specific regions such as Taihang Mountains in the southwest, Damajun Mountain in the northwest, and certain areas of central Beijing City, the SATLR exceeds 6 °C/km in depth. Conversely, in Chengde City in the northeast and Huapiling in Damajun Mountain in the northwest, the SATLR is shallower than 2 °C/km. Seasonally, the average SATLR displays significant variation, with 3~5 °C/km being prevalent in spring, summer, and autumn, and 2~4 °C/km in winter. Moreover, the diurnal SATLR patterns from the second to fifth altitude grades exhibit consistency throughout the year and across seasons, albeit with varying overall values at different altitudes. Notably, the SATLR of the first altitude grade demonstrates stability within a day at lower elevations. Full article

This study aims to develop a high-resolution temperature dataset from 40 km to 110 km over China by machine learning techniques, with a horizontal resolution of 0.5° × 0.5° and vertical resolution of 1 km, utilizing measurements from SABER onboard the Thermosphere, Ionosphere, Mesosphere Energetics, and Dynamics (TIMED) and Fengyun 4A (FY-4A) satellites. Accurate temperature profiles play a critical role in understanding the atmospheric dynamics and climate change. However, because of the limitation of traditional detecting methods, the measurements of the upper stratosphere and mesosphere are rare. In this study, a new method is developed to construct a high-resolution temperature dataset over China in the middle atmosphere based on the XGBoost technique. The model’s performance is also validated based on rocket observations and ERA5 reanalysis data. The results indicate that the model effectively captures the characteristics of the vertical and seasonal variations in temperature, which provide a valuable opportunity for further research and improvement of climate models. The model demonstrates the highest accuracy below 80 km with RMSE < 12 K, while its performance decreases above 100 km, where RMSE can exceed 20 K, indicating optimal performance in the upper stratosphere and lower mesosphere regions. Full article

All-sky radiance assimilation can increase the utilization of satellite observations in cloudy regions and improve typhoon forecasts. This study focuses on the newly launched FengYun-3F satellite equipped with the Microwave Humidity Sounder II (MWHS-II) and develops an all-sky assimilation capability for its radiance data. A series of assimilation experiments were conducted to evaluate their impacts on the forecast of Typhoon Yagi (2024), demonstrating that all-sky assimilation leads to reductions in track error (23.14%) and improvements in precipitation forecasts (Equitable Threat Score increase of 16.92%) compared to clear-sky assimilation. Furthermore, a detailed comparison of assimilation experiments shows that using only the 183 GHz humidity channels yields limited improvement in tropospheric humidity, whereas assimilating the 118 GHz temperature channels significantly enhances temperature and wind forecasts. Combined assimilation of both frequency bands synergistically maintains accurate track and intensity predictions while further improving precipitation prediction. These findings demonstrate the value of multichannel all-sky assimilation and inform future satellite data assimilation strategies. Full article

PM_2.5 pollution poses significant risks to human health and the environment, underscoring the importance of accurate PM_2.5 simulation. This study simulated a representative PM_2.5 pollution event using the Weather Research and Forecasting model coupled with chemistry (WRF-Chem), incorporating the assimilation of infrared atmospheric motion vector (AMV) data from the Fengyun-4A (FY-4A) satellite. A comprehensive analysis was conducted to examine the meteorological characteristics of the event and their influence on PM_2.5 concentration simulations. The results demonstrate that the assimilation of FY-4A infrared AMV data significantly enhanced the simulation performance of meteorological variables, particularly improving the wind field and capturing local and small-scale wind variations. Moreover, PM_2.5 concentrations simulated with AMV assimilation showed improved spatial and temporal agreement with ground-based observations, reducing the root mean square error (RMSE) by 8.2% and the mean bias (MB) by 15.2 µg/m³ relative to the control (CTL) experiment. In addition to regional improvements, the assimilation notably enhanced PM_2.5 simulation accuracy in severely polluted cities, such as Tangshan and Tianjin. Mechanistic analysis revealed that low wind speeds and weak atmospheric divergence restricted pollutant dispersion, resulting in higher near-surface concentrations. This was exacerbated by cooler nighttime temperatures and a lower planetary boundary layer height (PBLH). These findings underscore the utility of assimilating satellite-derived wind products to enhance regional air quality modeling and forecasting accuracy. This study highlights the potential of FY-4A infrared AMV data in improving regional pollution simulations, offering scientific support for the application of next-generation Chinese geostationary satellite data in numerical air quality forecasting. Full article

Land Surface Temperature (LST), as a core variable in the coupling of land–atmosphere energy transfers and ecological responses, relies heavily on the global coverage capacity of thermal infrared remote sensing (TIR-LST) for dynamic monitoring. Currently, the time reconstruction method of the TIR-LST products from China’s Fengyun polar-orbiting satellite under dynamic cloud interference remains under exploration. This study focuses on the Heihe River Basin in western China, and addresses the issue of cloud coverage in relation to the Fengyun-3C (FY-3C) satellite TIR-LST. An innovative spatiotemporal reconstruction framework based on multi-source data collaboration was developed. Using a hybrid ensemble learning framework of random forest and ridge regression, environmental parameters such as vegetation index (NDVI), land cover type (LC), digital elevation model (DEM), and terrain slope were integrated. A downscaling and multi-factor collaborative representation model for land surface temperature was constructed, thereby integrating the passive microwave LST and thermal infrared VIRR-LST from the FY-3C satellite. This produced a seamless LST dataset with 1 km resolution for the period of 2017–2019, with temporal continuity across space. The validation results show that the reconstructed data significantly improves accuracy compared to the original VIRR-LST and demonstrates notable spatiotemporal consistency with MODIS LST at the daily scale (annual R² ≥ 0.88, RMSE < 2.3 K). This method successfully reconstructed the FY-3C satellite’s 1 km level all-weather LST time series, providing reliable technical support for the use of domestic satellite data in remote sensing applications such as ecological drought monitoring and urban heat island tracking. Full article

The satellite remote sensing of Aerosol Optical Depth (AOD) products is crucial in environmental monitoring and atmospheric pollution research. However, data gaps in AOD products from satellites like Fengyun significantly hinder continuous, seamless environmental monitoring capabilities, posing challenges for the long-term analysis of atmospheric pollution trends, responses to sudden ecological events, and disaster management. This study aims to develop a high-precision method to fill spatial AOD missing values and generate daily full-coverage AOD products for the Beijing–Tianjin–Hebei region in 2021 by integrating multi-dimensional data, including meteorological models, multi-source remote sensing, surface conditions, and nighttime light parameters, and applying machine learning methods. A comparison of five machine learning models showed that the random forest model performed optimally in AOD inversion, achieving a root mean square error (RMSE) of 0.11 and a coefficient of determination (R²) of 0.93. Seasonal evaluation further indicated that the model’s simulation was best in winter. Variable importance analysis identified relative humidity (RH) as the most critical factor influencing model results. The reconstructed full-coverage AOD product exhibited a spatial distribution trend of significantly higher values in the southern plain areas compared to mountainous regions, consistent with the actual aerosol distribution patterns in the Beijing–Tianjin–Hebei area. Moreover, the product demonstrated overall smoothness and high accuracy. This research lays the foundation for establishing a long-term, 1 km resolution, daily spatially continuous AOD product for the Beijing–Tianjin–Hebei region and beyond, providing more robust data support for addressing regional and larger-scale environmental challenges. Full article

The Total Precipitable Water (TPW) is a key variable of atmospheres, and its spatiotemporal distribution is of great importance in global climate change. This paper addresses the TPW retrieval over both sea and land surfaces from the data acquired by the Microwave Humidity Sounder II (MWHS-II) on Fengyun 3D (FY-3D) satellite. First, the Back Propagation Neural Network (BPNN) algorithms are developed with the spatiotemporal matching samples of the MWHS-II data with the fifth-generation European Centre for Medium-Range Weather Forecast (ECMWF) atmospheric reanalysis (ERA5) data. Then, the TPWs at spatial resolutions of 0.25° in longitude and latitude between 65°S and 65°N over both sea and land surfaces are retrieved from the pixel-aggregated FY-3D MWHS-II data in 2022. Finally, the TPWs retrieved in this work are validated with the radiosonde TPWs over both sea and land surfaces, and they are also compared to the F18 Special Sensor Microwave Imager Sounder (SSMIS) TPWs over sea surfaces. The results indicate that the BPNN algorithms developed in this work are valid and superior to the D-matrix method, the Ridge method, the Lasso method, the physical method, the random forest (RF) method, the support vector machine (SVM) method, and the eXtreme Gradient Boosting (XGBoost) method. Against the radiosonde TPWs, the mean error (ME), the root mean square error (RMSE), and mean absolute error (MAE) of the TPWs retrieved in this work are −1.17 mm, 3.46 mm, and 2.63 mm over sea surfaces, respectively, and they are −0.80 mm, 4.04 mm, and 3.13 mm over land surfaces, respectively. The TPWs retrieved in this work are much more accurate than the F18 SSMIS TPWs. Full article

Microwave sounding observations obtained from the National Oceanic and Atmospheric Administration (NOAA) and the European Meteorological Operational Satellite Program (METOP) satellites have been used for retrieving the cloud ice water path (IWP). However, the IWP algorithms developed in the past cannot be applied to the Fengyun-3F (FY-3F) microwave radiometers due to the differences in frequency of the primary channels and the fields of view. In this study, the IWP algorithm was tailored for the FY-3F satellite, and the retrieved IWP was compared with the fifth generation of reanalysis data from the European Centre for Medium-Range Weather Forecasts (ERA5) and the Meteorological Operational Satellite-C (METOP-C) products. The results indicate that the IWP distribution retrieved from FY-3F observations demonstrates strong consistency with the cloud ice distributions in ERA5 data and METOP-C products in low-latitude regions. However, discrepancies are observed among the three datasets in mid- to high-latitude regions. ERA5 data underestimate the frequency of high IWP values and overestimate the frequency of low IWP values. The IWP retrieval results from satellite datasets demonstrate a high level of consistency. Furthermore, an analysis of the IWP time series reveals that the retrieval algorithm used in this study better captures variability and seasonal characteristics of IWP compared to ERA5 data. Additionally, a comparison of FY-3F retrieval results with METOP-C products shows a high correlation and generally consistent distribution characteristics across latitude bands. These findings confirm the high accuracy of IWP retrieval from FY-3F data, which holds significant value for advancing IWP research in China. Full article