Search Results (89)

A key component of research on disaster risk in modern-age society in the inland areas of the Campania Region, southern Italy, was discovered in parish registers. Ecclesiastical archives, containing thousands of largely unpublished pages, served as a rich source of information on disruption and casualties. The parish registers preserved in these archives from the 16th century provide demographic records as well as notes on the most terrible events that affected society at the time. They include the catastrophic effects of seismic events recorded in this sector of the southern Apennines, an area characterised by high seismicity due to the complex dynamics of the convergence zone between the African and Eurasian plates. New findings reveal a more precise number and previously unreported deaths in several villages, confirming and suggesting some macroseismic intensities for the 1694 seismic event; moreover, further evidence was found for the hypothesised 1692 seismic event. A greater number of deaths was observed in some villages during the 1702 and 1732 events. Parish documents provided details about local construction techniques adopted after the well-known earthquake of 1732, including the use of more resilient materials and design modifications. Full article

Northwestern Türkiye (Biga Peninsula, Edremit Gulf, Saros Bay) is a highly seismically active region at the convergence of the Anatolian, Eurasian, and Aegean tectonic plates. It features numerous active faults, including the Yenice–Gönen and Edremit fault zones, in addition to offshore segments of the North Anatolian Fault Zone (NAFZ) in Saros Bay. Earthquakes here exhibit various mechanisms: the 2017 Ayvacik earthquake sequence (Mw 5.4) near the Tuzla Fault featured NE–SW normal faulting, reflecting regional extension. Other moderate events display strike–slips with minor normal components, indicating transtensional forces. These findings enhance our understanding of the area’s complex seismotectonic activity and stress the critical need for continuous seismic monitoring and hazard assessment in this geologically complex and densely populated part of Türkiye. Full article

Earthquakes are the result of the dynamic processes occurring beneath the Earth’s crust; specifically, the movement and interaction of tectonic/lithospheric plates. When one plate shifts relative to another, stress accumulates and is eventually released as seismic energy. This process is continuous and unstoppable. This phenomenon is well recognized in the Mediterranean region, where significant seismic activity arises from the northward convergence (4–10 mm per year) of the African plate relative to the Eurasian plate along a complex plate boundary. Consequently, our research will focus on the Mediterranean region, specifically examining seismic activity from 1990 to 2015 within the latitude range of 33–44° and longitude range of 17–44°. These geographical coordinates encompass 28 seismic zones, with the most active areas being Turkey and Greece. In this paper, we applied Grammatical Evolution for artificial feature construction in earthquake prediction, evaluated against machine learning approaches including MLP(GEN), MLP(PSO), SVM, and NNC. Experiments showed that feature construction (FC) achieved the best performance, with a mean error of 9.05% and overall accuracy of 91%, outperforming SVM. Further analysis revealed that a single constructed feature $\left(N_f=1\right)$ yielded the lowest average error (8.21%), while varying the number of generations indicated that $N_g=200$ provided an effective balance between computational cost and predictive accuracy. These findings confirm the efficiency of FC in enhancing earthquake prediction models through artificial feature construction. Our results, as will be discussed in greater detail within the research, yield an average error of approximately 9%, corresponding to an overall accuracy of 91%. Full article

The first oil and gas well in the South Yellow Sea Basin was completed in 1961. In 1984, 2.45 tons of light oil were obtained from the Cenozoic strata. However, it remains the only large oil and gas basin in China’s offshore area without industrial oil and gas discoveries. Although the consensus is that the South Yellow Sea Basin is a foreland basin, and the oil and gas exploration prospects are promising, the research on the regional structure and the tectonic evolution of the foreland basin system is weak, which seriously hinders the process of industrial oil and gas discoveries. This paper reports the results of over 30 years of onshore and offshore investigations and well-seismic joint interpretation in the study area: for the first time, the mountains and basins formed by the collision of the North China and Yangtze plates were discovered in the geological survey of the northern islands of the South Yellow Sea Basin; the C-type eclogite chronology of Qianliyan Island, the characteristics of the foreland basins and intracontinental foreland basins around the South Yellow Sea, and the tectonic evolution characteristics and models of the basins were clarified. Through the zircon/phosphate fission track analysis of the deep black Jurassic strata in the Qianyuan S-2 well, it was revealed that the collision and subduction of the Pacific Plate against the Eurasian Plate since the Late Cretaceous–Paleogene led to large-scale uplift movements, and more than 3000 m of strata were eroded in the basin area. This is consistent with the multiple unconformities of E/N, K/N, and T₂/N identified by well-seismic joint interpretation, and is also the main reason why oil and gas have been difficult to preserve in the South Yellow Sea Basin since the Middle Triassic–Jurassic. Deep prototype oil and gas exploration in the basin may be the preferred option for current oil and gas exploration deployment, which is conducive to achieving industrial oil and gas discoveries. Full article

Quantitative investigation of major fault zones with low slip rates and long recurrence intervals in densely populated regions is essential for understanding earthquake recurrence and assessing seismic hazard. The Tanlu Fault Zone, a major lithospheric boundary extending from eastern China into Russia, provides a key case study. Through remote sensing interpretation integrated with seismic-geological evidence, we identified a ~150 km-long fresh surface rupture zone along the Yilan–Yitong Fault in the Fangzheng–Tangyuan region of Heilongjiang Province, NE China. Chronological constraints from previous and recent trenching indicate that the most recent event occurred in the late Holocene, with an estimated magnitude of M_w ≈ 7.6, comparable to the scale of AD 1668 Tancheng earthquake in North China. The northeastern section of the Tanlu Fault Zone is also subject to long-term far-field Coulomb stress loading from subduction of the Pacific Plate beneath the Eurasian Plate. Although the fault exhibits long recurrence intervals, the urgency of future strong earthquakes cannot be overlooked. Furthermore, our results suggest that the northeastern Tanlu Fault Zone is characterized by segmentation, underscoring the need for refined paleoseismic investigations to constrain recurrence behavior and seismic hazard in Northeast China. Full article

The newly discovered Yanshan gold deposit within the Qixia–Penglai mineralization belt is situated within the Daliuhang goldfield of Daliuhang Town, approximately 45 km southeast of Penglai City, the Jiaodong Peninsula. Quartz-vein–type gold orebodies are mainly distributed among the Guojialing granite and are controlled by NNE-trending faults. Native gold primarily occurs within the interiors of pyrite grains, forming inclusion gold and fracture gold. In this study, LA-ICP-MS zircon U-Pb dating and in situ sulfur isotope analysis of gold-bearing pyrite were conducted to constrain the ore genesis of the Yanshan gold deposit. Guojialing monzogranite and porphyritic granodiorite yielded weighted mean ²⁰⁶Pb/²³⁸U ages of 130 ± 2 Ma (MSWD = 1.8) and 131 ± 2 Ma (MSWD = 1.8), respectively, indicating that magmatism and gold mineralization occurred during the Early Cretaceous period. The in situ sulfur δ³⁴S values of euhedral crystalline pyrite (Py1) formed in the early stage ranged from 3.21% to 5.35‰ (n = 11), while the in situ sulfur δ³⁴S values of pyrite (Py2) formed in the later stage ranged from 6.32‰ to 9.77‰ (n = 10), suggesting that the sulfur of the Yanshan gold deposit primarily originates from magmatism, with contamination from stratigraphic materials. Granitoids are highly likely to provide the thermal drive for fluid activity; however, the origins of the fluids and ore-forming materials remain difficult to determine. Based on geological features, geochronological data, and in situ sulfur isotopic analysis, this study concludes that the Yanshan gold deposit is a mesothermal magmatic hydrothermal vein-type gold deposit. The mineralization of the Yanshan gold deposit is related to the subduction of the Mesozoic Paleo-Pacific Plate beneath the Eurasian continent and is mainly controlled by steep dip faults. This study provides theoretical guidance for further exploration and prospecting of the Yanshan gold deposit. Full article

The Diaoyu Islands Folded-Uplift Belt consists of metamorphic basement, magmatic rocks and Paleogene series in the Eastern Depression Zone of the East China Sea Basin which was deformed and uplifted by magma emplacement. The emplacement of the magma resulted in an unclear understanding of the Paleogene geomorphy in the paleo-uplift, further affecting the analysis of the eastern boundary and the sedimentary environment of Paleogene prototype basin in the Eastern Depression Zone. To explore the Paleogene geomorphy and magma emplacement process of the Diaoyu Islands Folded-Uplift Belt, we conducted a detailed interpretation of 2-D seismic profiles and identified nearshore subaqueous fans and fan deltas within the deformed strata. The development scale of them helps to determine the approximate location of the Paleogene eastern boundary of the Eastern Depression Zone. We integrated the boundary location with gravity, magnetic, and well data to obtain the Paleogene geomorphy of the Diaoyu Islands Folded-Uplift Belt. Our results indicate that the subduction direction of the Pacific Plate was almost perpendicular to the Eurasian Plate during the late Eocene, leading to the development of numerous left-lateral strike-slip faults within the East China Sea Basin, further forming channels within the paleo-uplift, which connected the Eastern Depression Zone and the ocean. In the Early Oligocene, the subduction rate of the Pacific Plate abruptly increased, resulting in large-scale and significant exhumation of the paleo-uplift, and the Eastern Depression Zone had transformed into a lacustrine sedimentary environment. Furthermore, due to the continuous retreat of the Pacific Plate, the extension center of the back-arc basin moved to the eastern margin of the Eastern Depression Zone in the late Oligocene. This work provides a method for recovering the geomorphology of complex tectonic units in back-arc basins based on fine seismic interpretation, solving the key problem that constrained the recovery of boundaries and sedimentary environment of the prototype basin. Full article

The Southern Lhasa Terrane, as the southernmost tectonic unit of the Eurasian continent, has long been a focal area in global geoscientific research due to its complex evolutionary history. The Yeba Formation exposed in this terrane comprises an Early–Middle Jurassic volcanic–sedimentary sequence that records multiphase tectonic deformation. This study applies structural analysis to identify three distinct phases of tectonic deformation in the Yeba Formation of the Southern Lhasa Terrane. The D₁ deformation is characterized by brittle–ductile shearing, as evidenced by the development of E-W-trending regional shear foliation (S₁). S₁ planes dip northward at angles of 27–87°, accompanied by steeply plunging stretching lineations (85–105°). Both south- and north-directed shear-rotated porphyroclasts are observed in the hanging wall. ⁴⁰Ar-³⁹Ar dating results suggest that the D₁ deformation occurred at ~79 Ma and may represent an extrusion-related structure formed under a back-arc compressional regime induced by the low-angle subduction of the Neo-Tethys Ocean plate. The D₂ deformation is marked by the folding of the pre-existing shear foliation (S₁), generating an axial planar cleavage (S₂). S₂ planes dip north or south with angles of 40–70° and fold hinges plunge westward or NWW. Based on regional tectonic evolution, it is inferred that the deformation may have resulted from sustained north–south compressional stress during the Late Cretaceous (79–70 Ma), which caused the overall upward extrusion of the southern Gangdese back-arc basin, leading to upper crustal shortening and thickening and subsequently initiating folding. The D₃ deformation is dominated by E-W-striking ductile shear zones. The regional shear foliation (S₃) exhibits a preferred orientation of 347°∠75°. Outcrop-scale ductile deformation indicators reveal a top-to-the-NW shear sense. Combined with regional tectonic evolution, the third-phase (D3) deformation is interpreted as a combined product of the transition from compression to lateral extension within the Lhasa terrane, associated with the activation of the Gangdese Central Thrust (GCT) and the uplift of the Gangdese batholith since ~25 Ma. Full article

The Chagai porphyry copper belt is a major component of the Tethyan metallogenic domain, which spans approximately 300 km and hosts several giant porphyry copper deposits. The tectonic setting, whether subduction-related or post-collisional, and the deep dynamic processes governing the formation of these giant deposits remain poorly understood. Mafic microgranular enclaves (MMEs), mafic dikes, and multiple porphyries have been documented in the Saindak mining area. This work examines both the ore-rich and non-ore intrusions in the Saindak porphyry Cu-Au deposit, using methods like molybdenite Re-Os dating, U-Pb zircon ages, Hf isotopes, and bulk-rock geochemical data. Geochronological results indicate that ore-fertile and barren porphyries yield ages of 22.15 ± 0.22 Ma and 22.21 ± 0.33 Ma, respectively. Both MMEs and mafic dikes have zircons with nearly identical ²⁰⁶Pb/²³⁸U weighted mean ages (21.21 ± 0.18 Ma and 21.21 ± 0.16 Ma, respectively), corresponding to the age of the host rock. Geochemical and Sr–Nd–Hf isotopic evidence indicates that the Saindak adakites were generated by the subduction of the Arabian oceanic lithosphere under the Eurasian plate, rather than through continental collision. The adakites were mainly formed by the partial melting of a metasomatized mantle wedge, induced by fluids from the dehydrating subducting slab, with minor input from subducted sediments and later crust–mantle interactions during magma ascent. We conclude that shallow subduction of the Arabian plate during the Oligocene–Miocene may have increased the flow of subducted fluids into the sub-arc mantle source of the Chagai arc. This process may have facilitated the widespread deposition of porphyry copper and copper–gold mineralization in the region. Full article

Hainan Island and its surrounding seabed are located at the intersection of the Eurasian, Indochina, and South China Sea tectonic plates with active Quaternary volcanism and intensive seismicity, such as the 7.6-magnitude earthquake that occurred in northern Hainan in 1605. Based on the newest airborne gravity data of Hainan Island and its adjacent areas, this paper uses wavelet multiscale decomposition followed by power spectral analysis to estimate the average depth of each layer of the source field. We use the Parker–Oldenburg method to invert the Moho structure, incorporating constraints from seismic data to investigate the fine crustal structure and deformation characteristics to elucidate the deep seismogenic mechanism. The regional Moho depth decreases from 30 km in the northwest to 16 km in the southeast. The map of the Moho surface shows three Moho uplift zones, located in the northern Hainan Island, the southern Qiongdongnan Basin, and the southwestern tip of Hainan Island. The following findings are revealed: Firstly, a series of northeastward high-gravity anomaly strips are discovered for the first time in the middle and lower crust of Hainan Island, which may be the remnants within the continental crust of the ancient Pacific northwestward subduction during the Mesozoic era. Secondly, under the Leiqiong volcanic rocks, there is a pronounced northeastward high-value anomaly and shallower Moho depth, which may indicate the deep-seated mantle material that rose and intruded during the activity of the Hainan mantle plume. Thirdly, the seismogenic structure is discussed by combining the wavelet multiscale decomposition results with natural seismic data. The results show that earthquakes occur in the place where the NE-trending gravity anomaly is cut by the NW-trending fault in the upper crust. That place also lies in the gravity anomaly gradient or high-value anomaly in the middle and lower crust. These features reveal that the earthquakes on Hainan Island are controlled by the left strike-slip activity of the Red River Fault and deep mantle upwelling caused by Hainan Plume. Full article

This study examines the origin, tectonic setting, and Cu–Pb–Zn polymetallic mineralization of the Yangjiayu Complex, situated on the southwestern margin of the Jiaolai Basin. We present detailed geochemical, zircon U–Pb geochronological, and Hf isotopic data for rhyolite porphyry and monzodiorite samples. Zircon U–Pb dating reveals that the emplacement of both intrusions occurred in the Early Cretaceous. While the monzodiorite (122.5 ± 0.7 Ma) is numerically slightly older than the rhyolite porphyry (121.2 ± 0.6 Ma), considering the error ranges, their ages are essentially similar. The rhyolite porphyry displays higher SiO₂ and Na₂O + K₂O contents and a lower Al₂O₃ content relative to the monzodiorite. Geochemically, both intrusions are classified as high-K calc-alkaline and peraluminous, characterized by enrichment in large-ion lithophile elements (LILEs; e.g., Ba, Rb, Pb) and light rare earth elements (LREEs), along with depletion in high-field-strength elements (HFSEs; e.g., Nb, P, Ta) and heavy rare earth elements (HREEs). The rhyolite porphyry further exhibits middle rare earth elements (MREEs; e.g., Eu, Gd, Tb, Dy) depletion. Similar zircon εHf(t) values (monzodiorite: −23.0 to −26.1; rhyolite porphyry: −23.2 to −25.0) suggest a shared source derived from partial melting of the thickened lower crustal rocks. In comparison to the monzodiorite, the rhyolite porphyry shows lower total REE contents, a more pronounced negative Eu anomaly and stronger MREE depletion, higher Rb, Th, and U concentrations, and more significant P depletion, features indicative of more extensive assimilation-fractional crystallization (AFC). These geochemical and geochronological data indicate that the Yangjiayu Complex originated within an extensional tectonic setting associated with the Early Cretaceous subduction of the Paleo-Pacific Plate underneath the Eurasian Plate. Cu–Pb–Zn mineralization, primarily localized within the monzodiorite, is interpreted to be generated by magmatic-hydrothermal fluids. Therefore, ~120 Ma dioritic intrusions within the Jiaolai Basin constitute prospective targets for (Cu)–Pb–Zn polymetallic exploration. Full article

Afghanistan is located on the Eurasian tectonic plate’s edge, a highly seismically active region. It is bordered by the northern boundary of the Indian plate and influenced by the collisional Arabian plate to the south. The Hindu Kush and Pamir Mountains in Afghanistan are part of the western extension of the Himalayan orogeny and have been uplifted and sheared by the convergence of the Indian and Eurasian plates. These tectonic activities have generated numerous active deep faults across the Hindu Kush–Himalayan region, many of which intersect Afghanistan, resulting in frequent high-magnitude earthquakes. This tectonic interaction produces ground shaking of varying intensity, from high to moderate and low, with the epicenters often located in the northeast and extending southwest across the country. This study maps Afghanistan’s tectonic structures, identifying the most active geological faults and regions with heightened seismicity. Historical earthquake data were reviewed, and recent destructive events were incorporated into the national earthquake dataset to improve disaster management strategies. Additionally, the study addresses earthquake hazards related to building and infrastructure design, offering potential solutions and directions to mitigate risks to life and property. Full article

The convergence zone of the Eurasian (EURA) and North Africa plate (NUBIA) is primarily marked by the activity between the Betics in south of Spain and the Rif and Atlas in Morocco. This area, where the diffuse tectonics between these plates are currently converging in a NW-SE direction, presents several continuous fault zones, such as the Betic–Alboran–Rif shear zone. The Royal Institute and Observatory of the Spanish Navy (ROA) currently operates geodetic stations in various parts of North Africa, some in particularly interesting locations, such as the Alhucemas (ALHU) rock, and also in more stable areas within the Nubian plate, such as Tiouine (TIOU). For the first time, the displacement velocities of the ROA CGNSS stations have been estimated to provide additional geodynamic information in an area with few stations. The obtained velocities have been compared with other recent studies in this field that included data older than 10 years or episodic campaigns without continuous stations. PRIDE (3.1.2) and SARI (February, 2025) software were used for processing, and the velocities were obtained by the ROA for international stations (RABT, SFER, MALA, HUEL, LAGO, TARI, and ALME). These initial results confirm the convergence trend between Eurasia and Nubia of approximately 4 mm/year in the NW-SE direction. It is also evident that there is independent behavior among the Atlas stations and those in the Moroccan Meseta compared to those located in the Rif mountain range, which could indicate the separation of smaller tectonic domains within the continental plate convergence zone. Along the Rif coast in Al Hoceima Bay, the faults are being approached; additionally, there is a slight clockwise displacement towards Melilla, which has also been demonstrated by stations in the Middle Atlas, such as TAZA. As for the stations in the Strait of Gibraltar, they exhibit a similar behavior until reaching the diffuse zone of the Guadalquivir basin where the diffuse convergence zone may exist. This may explain why stations to the north of the basin, such as LIJA or HUEL, change their behavior compared to nearby ones like SFER in the south. Furthermore, Alboran seems to follow the same displacement in direction and velocity as the other stations in North Africa and southern Spain. Full article

The Makran Subduction Zone (MSZ) is a tectonic plate boundary where the Arabian Plate is subducting beneath the Eurasian Plate. This study investigated the dynamic response in the Gwadar region, located in the eastern part of the MSZ. A suite of seismic records compatible with the Building Code of Pakistan (BCP:2021) rock design spectrum was used as the input ground motions at the bedrock. The amplification characteristics were assessed through a series of one-dimensional (1D) site response analyses utilizing a non-linear (NL) approach. The results revealed significant de-amplification in soft soils at short spectral periods. A general depth-wise decrease in the shear stress ratio and peak ground acceleration values was observed, influenced by shear-strain-induced effects and shear wave velocity reversals within the site profiles. The code spectra, compared to the proposed design spectra, underestimated the site amplification for stiff soils (i.e., Site Class D) for periods of less than 0.32 s and overestimated it for soft soils (i.e., Site Class E) across all periods. These findings underscore the necessity for site-specific ground response analyses, particularly within the framework of the China–Pakistan Economic Corridor (CPEC). Full article

The newly discovered Erdaodianzi gold deposit in southern Jilin Province, Northeast China, is located in the eastern segment of the northern margin of the North China Craton (NCC). It is a large-scale gold deposit with reserves of 38.4 tons of gold. Gold mineralization in the ore district primarily occurs in gold-bearing quartz–sulfide veins. The gold ore occurs mainly as vein, veinlet, crumby, and disseminated structures. The hydrothermal process can be divided into three stages: stage I, characterized by quartz, arsenopyrite, and pyrite; stage II, featuring quartz, arsenopyrite, pyrite, pyrrhotite, chalcopyrite, sphalerite, and native gold; and stage III, consisting of quartz, pyrite, sphalerite, galena, electrum (a naturally occurring Au–Ag alloy), and calcite. Electrum and native gold primarily occur within the fissures of the polymetallic sulfides. To determine the enrichment mechanism of the Au element and the genetic types of ore deposits in the Erdaodianzi deposit, sourcing in situ trace element data, element mapping and sulfur isotope analysis were carried out on sphalerites from different stages using LA-ICP-MS. Minor invisible gold, in the form of Au–Ag alloy inclusions, is present within sphalerites, as revealed by time-resolved depth profiles. The LA-ICP-MS trace element data and mapping results indicate that trivalent or quadrivalent cations, such as Sb³⁺ and Te⁴⁺, exhibit a strong correlation with Au. This correlation can be explained by a coupled substitution mechanism, where these cations (Sb³⁺ and Te⁴⁺) replace zinc ions within the mineral structure, resulting in a strong association with Au. Similarly, the element Pb exhibits a close relationship with Au, which can be attributed to the incorporation of tetravalent cations like Te⁴⁺ into the mineral structure. The positive correlation between Hg and Au can be attributed to the formation of vacancies and defects within sphalerite, caused by the aforementioned coupled substitution mechanism. A slight positive relationship between Au and other divalent cations, including Fe²⁺, Mn²⁺, and Cd²⁺, may result from these cations simply replacing Zn within the sphalerite lattice. The crystallization temperatures of the sphalerite, calculated via the Fe/Zn ratio, range from 238 °C to 320 °C. The δ³⁴S values are divided into two intervals: one ranging from −1.99 to −1.12‰ and the other varying from 10.96 to 11.48‰. The sulfur isotopic analysis revealed that the ore-forming materials originated from magmatic rock, with some incorporation of metamorphic rock. Comparative studies of the Erdaodianzi gold deposit and other gold deposits in the Jiapigou–Haigou gold belt have confirmed that they are all mesothermal magmatic–hydrothermal lode gold deposits formed at the subduction of the Paleo-Pacific Plate beneath the Eurasian Plate during the Middle Jurassic. The Jiapigou–Haigou gold belt extends northwest to the Huadian area of Jilin province. This suggests potential for research on gold mineralization in the northwest of the belt and indicates a new direction for further gold prospecting in the region. Full article