Search Results (920)

With the acceleration of urbanization in China, water resources have become a key factor restricting regional sustainable development. Current research primarily examines the temporal or spatial variations in the water resources ecological footprint (WREF), with limited emphasis on the integration of both spatial and temporal scales. In this study, we collected the data and information from the 2005–2022 Statistical Yearbook and Water Resources Bulletin of the Yangtze River Delta Urban Agglomeration (YRDUA), and calculated evaluation indicators: WREF, water resources ecological carrying capacity (WRECC), water resources ecological pressure (WREP), and water resources ecological surplus and deficit (WRESD). We primarily analyzed the temporal and spatial variation in the per capita WREF and used the method of Geodetector to explore factors driving its temporal and spatial variation in the YRDUA. The results showed that: (1) From 2005 to 2022, the per capita WREF (total water, agricultural water, and industrial water) of the YRDUA generally showed fluctuating declining trends, while the per capita WREF of domestic water and ecological water showed obvious growth. (2) The per capita WREF and the per capita WRECC were in the order of Jiangsu Province > Anhui Province > Shanghai City > Zhejiang Province. The spatial distribution of the per capita WREF was similar to those of the per capita WRECC, and most areas effectively consume water resources. (3) The explanatory power of the interaction between factors was greater than that of a single factor, indicating that the spatiotemporal variation in the per capita WREF of the YRDUA was affected by the combination of multiple factors and that there were regional differences in the major factors in the case of secondary metropolitan areas. (4) The per capita WREF of YRDUA was affected by natural resources, and the impact of the ecological condition on the per capita WREF increased gradually over time. The impact factors of secondary metropolitan areas also clearly changed over time. Our results showed that the ecological situation of per capita water resources in the YRDUA is generally good, with obvious spatial and temporal differences. Full article

The Chinese red panda (Ailurus styani) is a rare and endangered animal in China; the increase in global temperature and the interference of human activities have caused irreversible effects on the suitable habitat of wild red pandas and threatened their survival. Therefore, it is necessary to carry out scientific research and protection for Chinese red pandas. In this study, the MaxEnt model was used to predict and analyze the suitable habitats of Chinese red pandas in the large and small Xiangling Mountains. The results showed that the main ecological factors affecting the suitable habitat distribution of Chinese red pandas in the Daxiangling Mountains are the average slope (45.6%, slope), the distance from the main road (24.2%, road), and the average temperature in the coldest quarter (11%, bio11). The main ecological factors affecting the suitable habitat distribution of Chinese red pandas in the Xiaoxiangling Mountains are bamboo distribution (67.4%, bamboo), annual temperature range (20.7%, bio7), and the average intensity of human activities (8.7%, Human Footprint). The predicted suitable habitat area of the Daxiangling Mountains is 123.835 km², and the predicted suitable habitat area of the Xiaoxiangling Mountains is 341.873 km². The predicted suitable habitat area of the Daxiangling Mountains accounts for 43.45% of the total mountain area, and the predicted suitable habitat area of the Xiaoxiangling Mountains accounts for 71.38%. The suitable habitat area of the Xiaoxiangling Mountains is nearly three times that of the Daxiangling Mountains, and the proportion of suitable habitat area of the Xiaoxiangling Mountains is much higher than that of the Daxiangling Mountains. The suitable habitat of Chinese red pandas in the Daxiangling Mountains is mainly distributed in the southeast, and the habitat is coherent but fragmented. The suitable habitat of Chinese red panda in Xiaoxiangling Mountains is mainly distributed in the east, and the habitat is more coherent. The results of this study can provide a scientific basis for the protection of the population and habitat of Chinese red pandas in Sichuan. Full article

This study investigates the impact of partially replacing cement with fly ash (FA) on the mechanical performance of fiber-reinforced rubberized concrete (FRRC) incorporating waste tyre rubber and recycled macro-synthetic fibers (MSF). FRRC mixtures were prepared with varying fly ash replacement levels (0%, 25%, and 50%), rubber aggregate contents (0%, 10%, and 20% by volume of fine aggregate), and macro-synthetic fiber dosages (0% to 1% by total volume). The fresh properties were evaluated through slump tests, while hardened properties including compressive strength, splitting tensile strength, and flexural strength were systematically assessed. Results demonstrated that fly ash substitution up to 25% improved the interfacial bonding between rubber particles, fibers, and the cementitious matrix, leading to enhanced tensile and flexural performance without significantly compromising compressive strength. However, at 50% replacement, strength reductions were more pronounced due to slower pozzolanic reactions and reduced cement content. The inclusion of MSF effectively mitigated strength loss induced by rubber aggregates, improving post-cracking behavior and toughness. Overall, an optimal balance was achieved at 25% fly ash replacement combined with 10% rubber and 0.5% fiber content, producing a more sustainable composite with favorable mechanical properties while reducing carbon and ecological footprints. These findings highlight the potential of integrating industrial by-products and waste materials to develop eco-friendly, high-performance FRRC for structural applications, supporting circular economy principles and reducing the carbon footprint of concrete infrastructure. Full article

The escalating threat of climate change has intensified the global urgency to accurately predict carbon dioxide (CO₂) emissions for sustainable development, particularly in developing economies experiencing rapid industrialization and globalization. Traditional Extreme Learning Machines (ELMs) offer rapid learning but often yield unstable performance due to random parameter initialization. This study introduces a novel hybrid model, Red-Billed Blue Magpie Optimizer-tuned ELM (RBMO-ELM) which harnesses the intelligent foraging behavior of red-billed blue magpies to optimize input-to-hidden layer weights and biases. The RBMO algorithm is first benchmarked on 15 functions from the CEC2015 test suite to validate its optimization effectiveness. Subsequently, RBMO-ELM is applied to predict Indonesia’s CO₂ emissions using a multidimensional dataset that combines economic, technological, environmental, and globalization-driven indicators. Empirical results show that the RBMO-ELM significantly surpasses several state-of-the-art hybrid models in accuracy (higher R²) and convergence efficiency (lower error). A permutation-based feature importance analysis identifies social globalization, GDP, and ecological footprint as the strongest predictors underscoring the socio-economic influences on emission patterns. These findings offer both theoretical and practical implications that inform data-driven Artificial Intelligence (AI) and Machine Learning (ML) applications in environmental policy and support sustainable governance models. Full article

The rice-wheat rotation is the main agricultural cropping system in Jiangsu Province, playing a vital role in ensuring food security and promoting economic development. However, current research on rice-wheat systems mainly focuses on in-situ controlled experiments at the point scale, with limited studies addressing carbon footprint (CF) and energy balance (EB) at the regional scale and long time series. Therefore, we analyzed the evolution patterns of the CF and EB of the rice-wheat system in Jiangsu Province from 1980 to 2022, as well as their influencing factors. The results showed that the sown area and total yield of rice and wheat exhibited an increasing–decreasing–increasing trend during 1980–2022, while the yield per unit area increased continuously. The CF of rice and wheat increased by 4172.27 kg CO₂ eq ha⁻¹ and 2729.18 kg CO₂ eq ha⁻¹, respectively, with the greenhouse gas emissions intensity (GHGI) showing a fluctuating upward trend. Furthermore, CH₄ emission, nitrogen (N) fertilizer, and irrigation were the main factors affecting the CF of rice, with proportions of 36%, 20.26%, and 17.34%, respectively. For wheat, N fertilizer, agricultural diesel, compound fertilizer, and total N₂O emission were the primary contributors, accounting for 42.39%, 22.54%, 13.65%, and 13.14%, respectively. Among energy balances, the net energy (NE) of rice exhibited an increasing and then fluctuating trend, while that of wheat remained relatively stable. The energy utilization efficiency (EUE), energy productivity (EPD), and energy profitability (EPF) of rice showed an increasing and then decreasing trend, while wheat decreased by 46.31%, 46.31%, and 60.62% during 43 years, respectively. Additionally, N fertilizer, agricultural diesel, and compound fertilizer accounted for 43.91–45.37%, 21.63–25.81%, and 12.46–20.37% of energy input for rice and wheat, respectively. Moreover, emission factors and energy coefficients may vary over time, which is an important consideration in the analysis of long-term time series. This study analyzes the ecological and environmental effects of the rice-wheat system in Jiangsu Province, which helps to promote the development of agriculture in a green, low-carbon, and high-efficiency direction. It also offers a theoretical basis for constructing a low-carbon sustainable agricultural production system. Full article

The global plastic crisis has generated significant interest in repurposing waste plastics as asphalt modifiers, presenting both environmental and engineering advantages. This study offers a comprehensive review of the applications of waste plastics in asphalt, focusing on their types, modification mechanisms, incorporation techniques, and environmental impacts, alongside proposed mitigation strategies. Commonly utilized plastics include polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET), each affecting asphalt performance differently—enhancing high-temperature stability and fatigue resistance while exhibiting varying levels of compatibility and environmental risks. The incorporation techniques, namely wet and dry processes, differ in terms of efficiency, cost, and environmental footprint: the wet process enhances durability but requires more energy, whereas the dry process is more cost-effective but may lead to uneven dispersion. Environmental concerns associated with these practices include toxic emissions (such as polycyclic aromatic hydrocarbons and volatile organic compounds) during production, microplastic generation through abrasion and weathering, and ecological contamination of soil and water. Mitigation strategies encompass optimizing plastic selection, improving pre-treatment and compatibilization methods, controlling high-temperature processing, and monitoring the spread of microplastics. This review highlights the need for balanced adoption of waste plastic-modified asphalt, emphasizing sustainable practices to maximize benefits while minimizing risks. Full article

Societies are aiming to have a higher ecological consciousness in wastewater treatment operations and achieve a more sustainable future. With this said, global demands for larger quantities of resources and the consequent waste generated will inevitably lead to the exhaustion of current municipal wastewater treatment works. The utilization of biosolids (particularly microbial proteins) from wastewater treatment operations could generate a sustainable bio-adhesive for the wood industry, reduce carbon footprint, mitigate health concerns related to the use of carcinogenic components, and support a more circular economic option for wastewater treatment. A techno-economic analysis for three 10 MGD wastewater treatment operations producing roughly 11,300 dry pounds of biosolids per day, in conjunction with co-feedstock defatted soy flour protein at varying ratios (i.e., 0%, 15%, and 50% wet weight), was conducted. Aspen Capital Cost Estimator V12 was used to design and estimate installed equipment additions for wastewater treatment plant integration into an urban biorefinery process. Due to the mechanical attributes and market competition, the chosen selling prices of each adhesive per pound were set for analysis as USD 0.75 for Plant Option P1, USD 0.85 for Plant Option P2, and USD 1.00 for Plant Option P3. Over a 20-year life, each plant option demonstrated economic viability with high NPVs of USD 107.9M, USD 178.7M, and USD 502.2M and internal rates of return (IRRs) of 24.0%, 29.0%, and 44.2% respectively. The options examined have low production costs of USD 0.14 and USD 0.19 per pound, minimum selling prices of USD 0.42–USD 0.51 per pound, resulting in between 2- and 4-year payback periods. Sensitivity analysis shows the effects biosolid production fluctuations, raw material market price, and adhesive selling price have on economics. The results proved profitable even with large variations in the feedstock and raw material prices, requiring low market selling prices to reach the hurdle rate of examination. This technology is economically enticing, and the positive environmental impact of waste utilization encourages further development and analysis of the bio-adhesive process. Full article

Cheese production is an ancient practice that is associated with the food and cultural identity of different peoples. There are over 500 cheese types globally, including 207 with protected denomination of origin (PDO) and 70 with protected geographical indication (PGI) status in the European Union (EU). Each cheese has various biochemical compositions, production methods, and maturation environments. This study has provided a critical review of the environmental impacts of cheese production, focusing on energy consumption, greenhouse gas (GHG) emissions, and the integration of renewable energy sources as sustainable strategies for this sector. Based on case studies and life cycle assessment (LCA) methodologies, the analysis revealed significant variability in energy use (3.0 to 70.2 MJ/kg) and GHG emissions (up to 22.13 kg CO₂ eq/kg), influenced by factors such as the cheese type, production complexity, system boundaries, and the technological or geographical context. Particular attention was given to heat treatment, refrigeration, and maturation processes, which contribute substantially to the overall energy footprint. The paper also discusses the methodological challenges in LCA studies, including the role of co-product allocation and database limitations. Finally, strategic renewable energy options, such as biogas recovery and solar thermal integration, are discussed as sustainable alternatives to reduce the environmental footprint of the dairy sector and support its sustainability. Full article

In recent years, agricultural crops have increasingly been attacked by more destructive insect pests, forcing modern farming to depend mainly on chemical insecticides. Although valuable, their widespread and intensive misuse has raised serious concerns about environmental and public health impacts. RNAi has been proposed as a safer alternative due to its high specificity, adaptability, and low ecological footprint. So far, dsRNA has proven effective in controlling various pest species, either through topical application or via genetically modified plants. Despite advances, large-scale implementation of RNAi remains challenging due to technical and biological hurdles that contribute to inconsistent performance. Key aspects such as dsRNA design, delivery techniques, and cellular uptake mechanisms still require refinement. Additionally, ensuring environmental stability, addressing biosafety concerns, and developing cost-effective production methods are essential for its practical application. In this review, we explore recent advances in the design and implementation of dsRNA, as well as the strategies that could support the successful integration of RNAi technology into pest management programs. Full article

This study discusses the role of organizational pro-environmental behavior in driving sustainable development. Studies of green practices highlight their capacity to achieve ecological goals while delivering economic sustainability with business strategies for sustainable businesses and advancing environmental sustainability law. It also considers how the development of artificial intelligence, resource management, big data analysis, blockchain, and the Internet of Things enables companies to maximize supply efficiency and address evolving environmental regulations and sustainable decision-making. Through digital technology, businesses can facilitate supply chain transparency, adopt circular economy practices, and produce in an equitable and environmentally friendly manner. Additionally, intelligent business management practices, such as effective decision-making and sustainability reporting, enhance compliance with authorities while ensuring long-term profitability from a legal perspective. Integrating business innovation and digital technology within legal entities enhances economic efficiency, reduces operational costs, improves environmental sustainability, reduces paper usage, and lowers the carbon footprint, creating a double-benefit model of long-term resilience. The policymakers’ role in formulating policy structures that lead to green digital innovation is also to ensure that economic development worldwide is harmonized with environmental protection and international governance. Using example studies and empirical research raises awareness about best practices in technology-based sustainability initiatives across industries and nations, aligning with the United Nations Sustainable Development Goals. Full article

Rural areas around the world are increasingly dealing with energy and environmental challenges. These challenges are particularly acute in developing countries, where persistent reliance on traditional energy sources—such as wood fuel—intersects with concerns about forest conservation and energy sustainability. While wood fuel use is often portrayed as unsustainable, it is important to acknowledge that much of it remains ecologically viable and socially embedded. This study explores the role of rural entrepreneurs in shaping low-carbon transitions at the intersection of household energy practices and environmental stewardship. Fieldwork was carried out in four rural Zambian communities in 2016 and complemented by 2024 follow-up reports. It examines the connections between household energy choices, greenhouse gas emissions, and forest resource dynamics. Findings reveal that over 60% of rural households rely on charcoal for cooking, with associated emissions estimated between 80 and 150 kg CO₂ per household per month. Although this is significantly lower than the average per capita carbon footprint in industrialized countries, such emissions are primarily biogenic in nature. While rural communities contribute minimally to global climate change, their practices have significant local environmental consequences. This study draws attention to the structural constraints as well as emerging opportunities within Zambia’s rural energy economy. It positions rural entrepreneurs not merely as policy recipients but as active agents of innovation, environmental monitoring, and participatory resource governance. A model is proposed to support sustainable rural energy transitions by aligning forest management with context-sensitive emissions strategies. Full article

The growing urgency of the climate crisis has heightened the importance of integrating sustainability into health education. Allied health professionals are well positioned to lead sustainable healthcare efforts, yet evidence suggests a persistent gap between student awareness and formal training. This study explored the perspectives, knowledge, and attitudes of Portuguese allied health students regarding sustainability. An online and anonymous cross-sectional survey was conducted among undergraduate and graduate students across multiple allied health disciplines. The questionnaire assessed general knowledge, perceptions of curricular integration, and attitudes toward sustainable clinical practice. A total of 247 (response rate of 8.23%) students participated, with the majority expressing high concern about climate change and strong support for environmentally responsible healthcare. However, the results revealed inconsistent awareness of healthcare’s environmental footprint and a limited exposure to structured sustainability education. Friedman tests indicated significant variability in students’ knowledge, perceived responsibility, and curricular experiences. Students identified priority themes for curricular inclusion—such as the environmental impact of the health system—and recognized their alignment with the UN Sustainable Development Goals (SDGs), particularly SDG 3 (Good Health) and SDG 13 (Climate Action). The findings highlight the need for the systematic, competency-based integration of sustainability into allied health curricula to support a climate-resilient and ecologically responsible future healthcare workforce. Full article

Vegetation is a fundamental component of terrestrial ecosystems. Understanding how vegetation changes and what drives these evolutions is crucial for developing a high-quality ecological environment and addressing global climate change. Extensive evidence has shown that China has undergone substantial vegetation changes, characterized primarily by greening. To quantify vegetation dynamics in China and assess the contributions of various drivers, we explored the spatiotemporal variations in the kernel Normalized Difference Vegetation Index (kNDVI) from 2001 to 2020, and quantitatively separated the influences of climate and human factors. The kNDVI time series were generated from the MCD19A1 v061 dataset based on the Google Earth Engine (GEE) platform. We employed the Theil-Sen trend analysis, the Mann-Kendall test, and the Hurst index to analyze the historical patterns and future trajectories of kNDVI. Residual analysis was then applied to determine the relative contributions of climate change and human activities to vegetation dynamics across China. The results show that from 2001 to 2020, vegetation in China showed a fluctuating but predominantly increasing trend, with a significant annual kNDVI growth rate of 0.002. The significant greening pattern was observed in over 48% of vegetated areas, exhibiting a clear spatial gradient with lower increases in the northwest and higher amplitudes in the southeast. Moreover, more than 60% of vegetation areas are projected to experience a sustained increase in the future. Residual analysis reveals that climate change contributed 21.89% to vegetation changes, while human activities accounted for 78.11%, being the dominant drivers of vegetation variation. This finding is further supported by partial correlation analysis between kNDVI and temperature, precipitation, and the human footprint. Vegetation dynamics were found to respond more strongly to human influences than to climate drivers, underscoring the leading role of human activities. Further analysis of tree cover fraction and cropping intensity data indicates that the greening in forests and croplands is primarily attributable to large-scale afforestation efforts and improved agricultural management. Full article

Unveiling the relationship between the “Water–Carbon–Ecology” (W-C-E) footprints embodied in regional trade and resource flows is crucial for enhancing the synergistic benefits between economic development and environmental protection. This study constructs an association framework based on the Multi-Regional Input–Output (MRIO) model to systematically evaluate the “W-C-E” footprints and resource flow characteristics of the Yangtze River Economic Belt and the Yellow River Basin. By integrating import and export trade data, this study reveals the patterns of resource flows within and outside these regions. This research delineates the connection patterns between the “W-C-E” footprints and resource flows across three dimensions: spatial, sectoral, and environmental–economic factors. The results indicate that the Yangtze River Economic Belt has gained significant economic benefits from regional trade but also bears substantial environmental costs. Import and export trade further exacerbate the imbalance in regional resource flows, with the Yangtze River Economic Belt exporting many embodied resources through high-energy-consuming products, while the Yellow River Basin increases resource input by importing products such as food and tobacco. Sectoral analysis reveals that agriculture, electricity and water supply, and mining are the sectors with the highest net output of “W-C-E” footprints in both regions, whereas services, food and tobacco, and construction are the sectors with the highest net input. The comprehensive framework of this study can be extended to the analysis of resource–environment–economic systems in other regions, providing methodological support for depicting complex human–land system linkage patterns. Full article

This study evaluated the viability of using the solid residues (bagasse) of the mezcal industry produced with Agave durangensis as a substrate for biogas production, using two chemical pretreatments, acid (HCl) and alkaline (KOH + Ca(OH)₂), to enhance its biodegradability and improve the anaerobic digestion (AD) process. The chemical composition of bagasse was analyzed before and after the chemical pretreatments and then AD experiments were conducted in anaerobic sequential batch reactors (A-SBR) to analyze the effect of pretreatments on biogas production performance. The results showed that acid pretreatment increased cellulose content to 0.606 g, which represented an increase of 34%, and significantly reduced hemicellulose. In contrast, alkaline pretreatment did not show significant changes in cellulose composition, although it caused a swelling of the Agave durangensis mezcal bagasse (Ad-MB) fibers. In terms of biogas production, Ad-MB pretreated with acid (Ad-MB-acid) increased cumulative production by 76% compared to the Agave durangensis mezcal bagasse that was not pretreated (Ad-MB-not pretreated) and by 135% compared to Agave durangensis mezcal bagasse pretreated with an alkaline solution (Ad-MB-alkaline). These results confirmed that Agave durangensis solid waste from the mezcal industry that receives acidic chemical pretreatment has the potential to generate biogas as a sustainable biofuel that can be used to reduce the ecological footprint of this industry. Full article