Search Results (79)

South Dongting Lake is an essential aquatic ecosystem that receives substantial water inflows from the Xiangjiang and Zishui Rivers. However, it is significantly impacted by human activities, including mining, smelting, and farming. These activities have led to serious contamination of the lake’s sediments with heavy metals (HMs). This study investigated the distribution, mobility, and influencing factors of HMs at the sediment–water interface. To this end, sediment samples were analyzed from three key regions (Xiangjiang River estuary, Zishui River estuary, and northeastern South Dongting Lake) using traditional sampling methods and Diffusive Gradients in Thin Films (DGT) technology. Analysis of fifteen HMs (Pb, Bi, Ni, As, Se, Cd, Sb, Mn, Zn, V, Cr, Cu, Tl, Co, and Fe) revealed significant spatial heterogeneity. The results showed that Cr, Cu, Pb, Bi, Ni, As, Se, Cd, Sb, Mn, Zn, and Fe exhibited high variability (CV > 0.20), whereas V, Tl, and Co demonstrated stable concentrations (CV < 0.20). Concentrations were found to exceed background values of the upper continental crust of eastern China (UCC), Yangtze River sediments (YZ), and Dongting Lake sediments (DT), particularly at the Xiangjiang estuary (XE) and in the northeastern regions. Speciation analysis revealed that V, Cr, Cu, Ni, and As were predominantly found in the residual fraction (F4), while Pb and Co were concentrated in the oxidizable fraction (F3), Mn and Zn appeared primarily in the exchangeable fractions (F1 and F2), and Cd was notably dominant in the exchangeable fraction (F1), suggesting a high potential for mobility. Additionally, DGT results confirmed a significant potential for the release of Pb, Zn, and Cd. Contamination assessment using the Pollution Load Index (PLI) and Geoaccumulation Index (Igeo) identified Pb, Bi, Ni, As, Se, Cd, and Sb as major pollutants. Among these, Bi and Cd were found to pose the highest risks. Furthermore, the Risk Assessment Code (RAC) and the Potential Ecological Risk Index (PERI) highlighted Cd as the primary ecological risk contributor, especially in the XE. The study identified sediment grain size, pH, electrical conductivity, and nutrient levels as the primary influencing factors. The PMF modeling revealed HM sources as mixed smelting/natural inputs, agricultural activities, natural weathering, and mining/smelting operations, suggesting that remediation should prioritize Cd control in the XE with emphasis on external inputs. Full article

The Dangerous Goods Transportation (DGT) presents significant challenges, requiring a strong and systematic risk assessment framework to ensure the safety and efficiency of the supply chain. This study addresses a critical gap by integrating a deterministic and holistic approach to risk assessment and management. Utilizing Geographic Information Systems (GIS), meteorological data, and material-specific information, the research develops a data-driven approach to identify analyze, evaluate, and mitigate risks associated with DGT. The main objectives include monitoring dangerous goods flows to identify critical risk areas, optimizing emergency response using a shared model, and providing targeted training for stakeholders involved in DGT. The study leverages Information and Communication Technologies (ICT) to systematically collect, interpret, and evaluate data, producing detailed risk scenario maps. These maps are instrumental in identifying vulnerable areas, predicting potential accidents, and assessing the effectiveness of risk management strategies. This work introduces an innovative GIS-based risk assessment model that combines static and dynamic data to address various aspects of DGT, including hazard identification, accident prevention, and real-time decision support. The results contribute to enhancing safety protocols and provide actionable insights for policymakers and practitioners aiming to improve the resilience of technological systems for road transport networks handling dangerous goods. Full article

Umami is a fundamental taste sensation, often described as a delicious and pleasant flavor perception. To enhance or complement the original flavor and meet the tastes of diverse regions, umami dipeptides have been extensively utilized in global food manufacturing. Currently, the application and purification techniques of dipeptides are relatively mature, while their umami mechanisms and molecular modification are both scarce. In this work, the 3D structure of the umami dipeptide target T1R1/T1R3 was first obtained through sequence alignment and homology modeling, then followed by the successful construction of a database containing 400 samples of dipeptides. Subsequently, the complex models of T1R1/T1R3, respectively, with DG (Asp-Gly) and EK (Glu-Lys) (i.e., T1R1_DG/T1R3, T1R1/T1R3_DG, T1R1_EK/T1R3, and T1R1/T1R3_EK) were obtained via molecular docking and virtual screening. Finally, based on comparative molecular dynamics (MD) simulation trajectories, the binding free energy was calculated to investigate receptor–ligand recognition and conformational changes, providing some implications for potential modifications of umami dipeptides. T1R1 tends to bind relatively small umami dipeptides, whereas T1R3 does the opposite, both of which favor the recognition of acidic and hydrophilic dipeptides. By comparing strategies such as hydroxyl introduction and chain length alteration, electrostatic effects may be more important than non-polar effects in molecular design. This work not only explores the recognition mechanism of umami dipeptides with the receptor T1R1/T1R3 showing certain theoretical significance, but also provides feasible suggestions for dipeptide screening and modification having certain application value. Full article

Heavy metals in peatland pose significant ecological risks due to their persistence, bioaccumulation, and dynamic mobilization under fluctuating environmental conditions. Understanding heavy metal dynamics in subtropical peatlands is critical for addressing global gaps in wetland metal cycling, as these ecosystems face intensified organic decomposition and climatic fluctuations that amplify mobilization risks—contrasting starkly with stable northern counterparts. This study investigates the geochemistry of heavy metals (Cr, Cu, Cd, and Pb) of Dajiuhu peatland in central China, using sequential extraction, gradient diffusion (DGT), and random forest modeling. The mean concentrations of Cr, Cu, Cd, and Pb in peat samples were 24.6 ± 13.7 mg/kg, 14.9 ± 2.51 mg/kg, 1.15 ± 0.62 mg/kg, and 54.9 ± 16.16 mg/kg. Principal component analysis identified three sources: plant-derived litter, bedrock weathering, and atmospheric deposition. Metal speciation revealed the predominance of residual fractions (Cr: 64%, Cu: 61%, Pb: 65%, Cd: 35%), with Cd exhibiting higher mobility (exchangeable: 20%, reducible: 25%). DGT measurements further confirmed distinct migration behaviors, as Cd stored in peat actively diffuses into the surrounding environment, while Pb present in the environment becomes immobilized within the peat matrix. Environmental factors regulate heavy metal speciation through distinct mechanisms. The exchangeable fractions of Cu and Cr are primarily controlled by the C/N ratio, whereas their oxidizable forms are significantly associated with Al content and pH levels. The exchangeable fractions of Pb and Cd are largely influenced by oxidation-reduction potential (ORP) and Ca concentrations, and their reduced forms are closely linked to total sulfur (TS) content. Furthermore, the reducible fractions of Cr and Cd are not only regulated by ORP but also modulated by TS. Our study highlights that the mobility of heavy metals in subtropical peatlands is likely to increase substantially as a result of environmental changes. Full article

In this work, photothermal beam deflection spectrometry (BDS), combined with a passive sampling technique of diffusive gradients in thin film (DGT), is optimized to improve the method’s sensitivity. The limit of detection (LOD) is then reduced by a factor of 2 (to the value of 20 nM). The functionality of the technique is compared for Chelex-100 (Ch-100) and suspended particulate reagent–iminodiacetate resin (SPR-IDA), used as binding resins in passive samplers. The absorption capacity of SPR-IDA resin is found to be less than 1 μM and far below that one of Chelex-100 resin (around 6 μM). The BDS technique is applied for determination of iron redox species concentration in sediment porewater. It is found that Fe in sediment porewater occurs both in Fe²⁺ (0.073 μM) and Fe³⁺ (0.095 μM) forms. The validation of the presented method reveals that the BDS technique ensures good repeatability, reproducibility, and reliability. Full article

Microplastics have a large surface area and hydrophobic characteristics, which helps them to easily adsorb organic matter and trace metals in soil. This interaction has the potential to alter soil physicochemical properties, affect the bioavailability of metals, and finally influence the toxicity of organisms. In the present study, we exposed Cd or As (Cd/As) to the earthworm Eisenia fetida (Savigny, 1826) in uncontaminated paddy soil, both in the presence and absence of polystyrene (PS) MPs (100~300 μm). The results show that MPs exhibit a significant influence on the physicochemical properties of As-contaminated soil, notably reducing the pH while increasing the electrical conductivity (EC), redox potential (Eh), and dissolved organic carbon (DOC), relative to single As treatment. At a Cd concentration of 40 mg·kg⁻¹, the addition of MPs substantially altered the soil properties, decreasing the pH while increasing the EC and DOC. The effect of MPs on the bioavailable Cd content in soil was associated with Cd concentration. Specifically, MPs significantly increased the content of DGT (diffusion gradient technology)-Cd at a Cd concentration of 60 mg·kg⁻¹. Regarding the bioavailable As content in the soil, MPs led to an increase at a high As concentration (40 mg·kg⁻¹). Moreover, the addition of MPs amplified the uptake rate constants (k_u) of DGT-Cd/As at various exposure concentrations, expediting the uptake of Cd/As by earthworms. In addition, compared to Cd treatment, the growth inhibition of earthworms in the As-treatment group was more significant due to microplastics. The results show that MPs in terrestrial environments magnify the negative effects of (semi-)metals, a phenomenon intricately tied to the degree of contamination by (semi-)metals. The interaction between MPs and metals may induce higher ecological risks for organisms. Full article

Elevated levels of cadmium (Cd) and lead (Pb) in the edible parts of rice (Oryza sativa L.) grown in agricultural soils may enter the human body through the food chain, posing significant health risks. In this study, rice and paired rhizosphere soil samples were collected from 194 locations in Jiangsu Province, China, with 60 samples selected for diffusive gradients in thin films (DGT) extraction analysis. The findings indicate that total soil concentrations of Cd and Pb are inadequate for assessing cadmium bioavailability, implying that current soil quality standards may not accurately reflect the bioaccessible fractions of these metals. Both DGT and soil solution measurements effectively predicted crop Cd levels, with the effective concentration (C_E) derived from the DGT-induced soil flux (DIFS) model showing the strongest correlation with rice Cd content. Pearson correlation analysis and a random forest (RF) model further identified critical factors influencing rice uptake of Cd and Pb, including soil iron (Fe) content, cation exchange capacity (CEC), pH, and the levels of zinc (Zn) and selenium (Se), which antagonize Cd uptake. Full article

The transformations of iron (Fe), phosphorus (P), and sulfide (S) have been previously investigated in many areas, but quantifying the effects of the seasons on nutrient transformations and bacterial community distributions is a major issue that requires urgent attention in areas with serious anthropogenic disturbance. The authors used the diffusive gradients in thin films (DGTs) technique and 16S rRNA gene sequencing to determine the spatial heterogeneity in the nutrient distribution and bacterial community structure in the overlying water and sediment in the Pearl River Delta (PRD). Sampling campaigns were conducted in summer and winter. The results show that the nutrient salts exhibited greater differences in time than in space and there were higher water pollution levels in winter than in summer. During summer, the abundant non-point source pollution from the rainfall input provided a rich substrate for the bacteria in the water, leading to a strong competitiveness of the PAOs and nitrifying bacteria. Meanwhile, a high temperature was favorable for the exchange of elements at the SWI, with a greater release of P, Fe, and N, while, with the low temperatures and high DO and nutrient salts seen in winter, the SOB and denitrifying bacteria were active, which correctly indicated the high concentration of SO₄²⁻ and NH₄⁺-N in the water. The microbial diversity and abundance were also affected by the season, with a higher richness and diversity of the microbial communities in summer than in winter, and the high salinity and nutrient salt concentration had a significant inhibitory effect on the microorganisms. A Mantel test revealed that the spatiotemporal distribution patterns of the dominant bacteria were closely related to the TOC and DO levels and played an important role in the P, Fe, S, and N cycle. These observations are important for understanding the nutrient salt transformation and diffusion in the Pearl River Delta. Full article

Urban areas are expanding rapidly and experience diverse and complex contamination of their surface waters. Addressing these issues requires different tools to describe exposures and predict toxicological risk to exposed biota. We surveyed 21 stormwater management ponds in Brampton, Ontario using three types of sampling methods deployed concurrently: time-integrated water sampling, biofilms cultured on artificial substrates, and organic-diffusive gradients in thin films (o-DGT) passive samplers. Our objective was to compare pesticide occurrences and concentrations to inform monitoring in stormwater ponds, which reflect pesticide pollution in urban areas. We detected 82 pesticides across the three sampling matrices, with most detections occurring in o-DGT samplers. The in situ accumulation of pesticides in o-DGTs during deployment and the high analytical sensitivity achieved establishes o-DGTs as excellent tools for capturing the mixtures of pesticides present. Water and biofilm sampling demonstrated that pesticide concentrations available for uptake are relatively low, with most below toxicological thresholds. Yet our results demonstrate that urban areas are subject to a wide range of pesticides, including herbicides, insecticides, and fungicides, and underscores the urgency of research to quantify the risks of chronic exposure to this chemical mixture. Full article

Background/Objectives: Plant-derived compounds are increasingly valued in drug discovery for their therapeutic potential. This study aims to examine the antimicrobial, antioxidant, and anticancer properties of kombucha beverages fermented with Gardenia jasminoides (GJ) and various types of Camellia sinensis teas: matcha green tea (MGT), organic green tea (OGT), and decaffeinated green tea (DGT). Methods: Two experimental designs were employed: (1) using black tea as a base substrate, infusing the four teas post-fermentation over 0–14 days, and (2) directly fermenting tea–herb combinations over 0–21 days. Antioxidant activity was assessed via the DPPH assay. Microbial dynamics were analyzed through total mesophilic bacteria and Lactobacillus counts. Antimicrobial potential was evaluated against E. coli, S. aureus, and S. enteritidis over 24 h. Cytotoxicity assays were conducted on Caco-2 and U251 cell lines to assess anticancer effects, with pH-adjusted controls used to differentiate bioactivity from acidity. Results: In the first experiment, GJ kombucha displayed the highest antioxidant potential (IC50: 14.04 µg/mL), followed by MGT (IC₅₀: 32.85 µg/mL) and OGT (IC₅₀: 98.21 µg/mL). In the second setup, unfermented GJ kombucha initially showed high antioxidant activity (IC₅₀: 12.94 µg/mL), improving during fermentation to reach an IC₅₀ of 18.26 µg/mL by day 21. Microbial analysis indicated moderate increases in total mesophilic bacteria and Lactobacillus in GJ kombucha after 14 days, while MGT, OGT, and DGT exhibited higher increments. GJ kombucha consistently demonstrated the highest antimicrobial activity against E. coli, S. aureus, and S. enteritidis, with significant inhibitory effects observed by 24 h. Cytotoxicity assays showed that GJ kombucha reduced Caco-2 cell viability to 20% at 800 µg/mL after 14 days, while U251 cells maintained 50% viability at the same concentration. Conclusions: This study highlights the antimicrobial, antioxidant, and anticancer potential of GJ kombucha, with fermentation enhancing bioactive metabolite production. Optimizing fermentation conditions, identifying specific bioactive compounds, expanding cytotoxicity testing, and exploring broader therapeutic applications of kombucha could maximize its health benefits and establish it as a natural antimicrobial and anticancer agent. Full article

The Density Gradient Theory (DGT) permits obtaining the surface tension by using an equation of state and the so-called influence parameter. Different correlations of the influence parameter versus temperature have been proposed, with the two-coefficient ones from Zuo and Stenby (full temperature range) and Miqueu et al. (valid for the lower temperature range) being widely used. Recently, Cachadiña et al. applied the DGT with the Peng-Robinson Equation of State to esters. They proposed a new two-coefficient correlation that uses a universal exponent related to the critical exponent associated with the dependence of coexistence densities on temperature near the critical point. When applied to n-alkanes, it is shown that the Cachadiña et al. correlation must be modified to improve the lower temperature range behavior. The proposed modification results in a three-coefficient correlation that includes the triple point temperature as an input parameter and incorporates the Zuo and Stenby and Miqueu et al. correlations as particular cases. Firstly, the correlation coefficients for each of the 32 n-alkanes considered are obtained by fitting the selected values for the surface tension obtained from different databases, books, and papers. The results obtained are comparable to other specific correlations reported in the literature. The overall mean absolute percentage deviation (OMAPD) between the selected and calculated data is just $0.79\%$. Secondly, a general correlation with three adjustable coefficients valid for all the n-alkanes is considered. Despite the OMAPD of 4.38% obtained, this correlation is discarded due to the high deviations found for methane. Finally, it is found that a new six-coefficient general correlation, including the radius of gyration as an input fluid parameter, leads to an OMAPD of $1.78\%$ for the fluid set considered. The use of other fluid properties as an alternative to the radius of gyration is briefly discussed. Full article

To improve the mechanization levels of red cluster pepper harvesting in hilly and mountainous regions of southwest China, a crawler-type harvester is developed to suit the local planting and growth characteristics of red cluster pepper and to facilitate mechanized picking, conveying, and collecting processes. The design, supported by theoretical calculations and structural analysis, includes detailed studies of the picking, conveying, and collecting mechanisms, as well as the hydraulic system. Factors affecting picking efficiency were identified. ADAMS simulation was used to determine the optimum rotational speed range for the spring-tooth roller by analyzing its trajectory. A prototype was then built and field tested with forward speed and the spring-tooth roller’s rotational speed as variables to assess impurity, damage, loss, and hanging rates. Data from these tests were analyzed using Design Expert software, which created a mathematical model relating the test indices to the two variables. Optimum parameters were identified, resulting in a harvester configuration that achieved an average productivity of 0.21 ha·h⁻¹ at a forward speed of 1.75 m·s⁻¹ and a roller rotational speed of 181 r·min⁻¹. The impurity rate was 26.7%, the loss rate was 6.1%, the damage rate was 2.3%, and the hanging rate was 4.2%, conforming to the industry standard DG/T 114-2019. This research provides a viable solution for mechanized harvesting of red cluster pepper in hilly and mountainous regions with small planting plots. Full article

The bioavailability of heavy metals in soil is a crucial factor in determining their potential uptake by plants and their subsequent entry into the food chain. Various methods, including traditional chemical extractants and the diffusive gradients in thin films (DGT) technique, are employed to assess this bioavailability. The bioavailability of heavy metals, particularly cadmium (Cd) and lead (Pb), is also influenced by soil texture and their concentrations in the soil solution. The primary objectives of this experiment were to compare and correlate the assessment of the Cd and Pb bioavailability using the DGT technique and traditional extractants across two soil textural classes: sandy clay loam (SCL) and clay loam (CL) at two contamination levels: aged contaminated (NC) and artificially contaminated (AC). The specific objectives included assessing the bioavailability of Cd and Pb at different growth stages of the wheat plant and correlating the DGT-based bioassessments of Cd and Pb with their concentrations in various plant parts at different growth stages. This study also compared the effectiveness of the DGT method and traditional extraction techniques in assessing the bioavailable fractions of Cd and Pb in soil. The regression analysis demonstrated strong positive correlations between the DGT method and various extraction methods. The results showed that the wheat plants grown in the AC soils exhibited lower root, shoot, and grain weights compared to those grown in the NC soils, indicating that metal contamination negatively impacts plant performance. The concentrations of Cd and Pb in the wheat tissues varied across different growth stages, with the highest levels observed during the grain filling (S3) and maturity (S4) stages. It is concluded that the in situ assessment of Cd and Pb though DGT was strongly and positively correlated with the Cd and Pb concentration in wheat plant parts at the maturity stage. A correlation and regression analysis of the DGT assessment and traditional extractants showed that the DGT method provides a reliable tool for assessing the bioavailability of Cd and Pb in soils and helped in developing sustainable soil management strategies to ensure the safety of agricultural products for human consumption. Full article

Currently, 4.0 technologies have generated important changes in government entities, promoting digital government transformation (DGT). This article addresses the challenge of improving the security, reliability and traceability of communications and certified notifications of state entities, particularly in the case of the Colombian government entity called the Comisión de Regulación de Comunicaciones (CRC). Four important points are presented in this report: (a) Research interest in blockchain and smart contracts has been greatly increasing, evidenced in a literature review conducted in the SCOPUS index; (b) a global reference framework on the use of emerging technologies, as is the case of blockchain, has been developed, as well as the legal and juridical framework in Colombia as a baseline; (c) a multi-criteria decision making framework has been used, resulting in the choice of the Zilliqa platform; and (d) The Tecnotifica™ V1.0 software tool is developed to automate notifications with stakeholders using blockchain. Its effectiveness and acceptance is validated with a technology acceptance level test (TAM). It is concluded that the incorporation of emerging technologies such as blockchain is of a very high interest and relevance in the digital transformation of the state sector in the world. Full article

The microalgae Chlorella vulgaris and Tetraselmis chui are valued for their nutrient-rich content, including lipids and polyunsaturated fatty acids (PUFA). However, little is known about how storage and processing affect their lipid quality. This study aimed to assess the impact of domestic storage and cooking practices in dried biomass of C. vulgaris and T. chui. Four conditions were tested: control (newly opened package), light (storage at room temperature and daily light regimen for three weeks), frozen (storage in the freezer at −20 °C for three weeks), and heated (three cycles of 90 min at 100 °C). Lipid extracts were analyzed by GC-MS and LC-MS, and antioxidant activity through DPPH and ABTS radical scavenging assays. Tested storage conditions promoted a decrease in fatty acid content and in diacyl/lyso lipid species ratios of phospholipid (PC/LPC, PE/LPE) and betaine lipids (DGTS/MGTS). Lipid extracts from light treatment showed the lowest antioxidant activity in C. vulgaris (ABTS, IC40: 104.9; DPPH, IC20: 187.9 ± 15.0), while heat affected the antioxidant activity of T. chui (ABTS, IC40: 88.5 ± 2.8; DPPH, IC20 209.4 ± 10.9). These findings underscore the impact of managing storage and processing conditions to optimize the nutritional and functional benefits of C. vulgaris and T. chui in food and feed applications. Full article