Search Results (302)

To address the critical challenge of synergistically enhancing both high-temperature mechanical properties and thermal conductivity in neutron-absorbing materials for dry storage of spent nuclear fuel, this study proposes an innovative strategy. This approach involves the controlled distribution, size, and crystalline states of nano-Al₂O₃ within an aluminum matrix. By combining plastic deformation and heat treatment, we aim to achieve a structurally integrated functional design. A systematic investigation was conducted on the microstructural evolution of Al₂O₃/10 wt.% B₄C/Al composites in their forged, extruded, and heat-treated states. We also examined how these states affect high-temperature mechanical properties and thermal conductivity. The results indicate that applying hot extrusion deformation along with optimized heat treatment parameters (500 °C for 24 h) allows for a lamellar dispersion of nano-Al₂O₃ and a crystallographic transition from amorphous to γ-phase. As a result, the composite demonstrates a tensile strength of 144 MPa and an enhanced thermal conductivity of 181 W/(m·K) at 350 °C. These findings provide theoretical insights and technical support for ensuring the high density and long-term safety of spent fuel storage materials. Full article

Diamond, renowned for its exceptional electrical, physical, and chemical properties, including ultra-wide bandgap, superior hardness, high thermal conductivity, and unparalleled stability, serves as an ideal candidate for next-generation high-power and high-temperature electronic devices. Among diamond-based devices, Schottky barrier diodes (SBDs) have garnered significant attention due to their simple architecture and superior rectifying characteristics. This review systematically summarizes recent advances in diamond SBDs, focusing on both metal–semiconductor (MS) and metal–interlayer–semiconductor (MIS) configurations. For MS structures, we critically analyze the roles of single-layer metals (including noble metals, transition metals, and other metals) and multilayer metals in modulating Schottky barrier height (SBH) and enhancing thermal stability. However, the presence of interface-related issues such as high densities of surface states and Fermi level pinning often leads to poor control of the SBH, limiting device performance and reliability. To address these challenges and achieve high-quality metal/diamond interfaces, researchers have proposed various interface engineering strategies. In particular, the introduction of interfacial layers in MIS structures has emerged as a promising approach. For MIS architectures, functional interlayers—including high-k materials (Al₂O₃, HfO₂, SnO₂) and low-work-function materials (LaB₆, CeB₆)—are evaluated for their efficacy in interface passivation, barrier modulation, and electric field control. Terminal engineering strategies, such as field-plate designs and surface termination treatments, are also highlighted for their role in improving breakdown voltage. Furthermore, we emphasize the limitations in current parameter extraction from current–voltage (I–V) properties and call for a unified new method to accurately determine SBH. This comprehensive analysis provides critical insights into interface engineering strategies and evaluation protocols for high-performance diamond SBDs, paving the way for their reliable deployment in extreme conditions. Full article

Nanofiltration (NF) is considered a competitive purification method for acidic stream treatments. However, conventional thin-film composite NF membranes degrade under acid exposures, limiting their applications in industrial acid treatment. For example, wet-process phosphoric acid contains impurities of multivalent metal ions, but NF membrane technologies for impurity removal under harsh conditions are still immature. In this work, we develop a novel strategy of acid-resistant nanofiltration membranes based on interfacial polymerization (IP) of polyethyleneimine (PEI) and cyanuric chloride (CC) with the s-triazine ring. The IP process was optimized by orthogonal experiments to obtain positively charged PEI-CC membranes with a molecular weight cut-off (MWCO) of 337 Da. We further applied it to the approximate industrial phosphoric acid purification condition. In the tests using a mixed solution containing 20 wt% P₂O₅, 2 g/L Fe³⁺, 2 g/L Al³⁺, and 2 g/L Mg²⁺ at 0.7 MPa and 25 °C, the NF membrane achieved 56% rejection of Fe, Al, and Mg and over 97% permeation of phosphorus. In addition, the PEI-CC membrane exhibited excellent acid resistance in the 48 h dynamic acid permeation experiment. The simple fabrication procedure of PEI-CC membrane has excellent acid resistance and great potential for industrial applications. Full article

The article presents a new AM (Additive Manufacturing) process development, necessary to repair parts made from Aluminum 6061 material, with T6 treatment. The laser Directed Energy Deposition (DED) and Extreme High-Speed Directed Energy Deposition (EHLA) capabilities are evaluated for repairing Al large components. To optimize the process parameters, single-track depositions were analyzed for both laser-powder DED (feed rate of 2 m/min) and EHLA (feed rate 20 m/min) for AlSi10Mg and Al6061 powders. The cross-sections of single tracks revealed the bonding characteristics and provided laser-powder DED, a suitable parameter selection for the repair. Three damage types were identified on the Al component to define the specification of the repair process and to highlight the capabilities of laser-powder DED and EHLA in repairing intricate surface scratches and dents. Our research is based on variation of the powder mass flow and beam power, studying the influence of these parameters on the weld bead geometry and bonding quality. The evaluation criteria include bonding defects, crack formation, porosity, and dilution zone depth. The bidirectional path planning strategy was applied with a fly-in and fly-out path for the hatching adjustment and acceleration distance. Samples were etched for a qualitative microstructure analysis, and the HV hardness was tested. The novelty of the paper is the new process parameters for laser-powder DED and EHLA deposition strategies to repair large Al components (6061 T6), using AlSi10Mg and Al6061 powder. Our experimental research tested the defect-free deposition and the compatibility of AlSi10Mg on the Al6061 substrate. The readers could replicate the method presented in this article to repair by laser-powder DED/EHLA large Al parts and avoid the replacement of Al components with new ones. Full article

Acaricide usage has led to the growing problem of resistance in ticks. A heavy tick burden and the presence of ticks on animals throughout the year, despite the monthly application of acaricides, in farms in the United Arab Emirates formed the motivation for this study. The objectives of this research were as follows: (a) to assess the acaricide resistance status of the most prevalent tick Hyalomma spp. to widely used acaricides Cypermethrin and Deltamethrin; (b) to identify the association of farm management practices and farm-level risk factors with the failure of tick treatment (acaracide resistance). A total of 1600 ticks were collected from 20 farms located in three different regions of Abu Dhabi Emirate including Al Ain (n = 10), Al Dhafra (n = 5), and Abu Dhabi (n = 5). The ticks were subjected to an in vitro bioassay adult immersion test (AIT) modified with a discriminating dose (AIT-DD) against commercial preparations of Cypermethrin and Deltamethrin. A questionnaire was designed to collect metadata and information on farm management and the farm-level risk factors associated with routine farm practices relating to the treatment and control of tick and blood parasite infections in camels and small ruminant populations. Hyalomma anatolicum and Hyalomma dromedarii were identified among the collected ticks, with H. anatolicum being the most prevalent tick species (70%) in the present study. The test results of the in vitro bioassay revealed varied emerging resistance to both of the acaricides in the majority of the three regions; fully susceptible tick isolates with zero resistance to Deltamethrin were recorded in one farm at Al Ain and two farms in the Abu Dhabi region. A questionnaire analysis showed that the failure of tick treatment in farms varied with the presence or absence of vegetation areas, types of animal breeds, and management practices. This study reports the emergence of resistance in ticks to Cypermethrin and Deltamethrin across the Abu Dhabi Emirate, indicating a strict warning for the cautious use of acaricides. There is also a need to improve awareness about sound tick management and control practices among farm owners through a multidisciplinary approach adopting integrated pest management strategies that engage farmers, veterinarians, and policy makers. Full article

Oligodendrocyte precursor cells (OPCs) are a distinct and dynamic glial population that retain proliferative and migratory capacities throughout life. While traditionally recognized for differentiating into oligodendrocytes (OLs) and generating myelin to support rapid nerve conduction, OPCs are now increasingly appreciated for their diverse and non-canonical roles in the central nervous system (CNS), including direct interactions with neurons. A notable feature of OPCs is their expression of diverse ion channels that orchestrate essential cellular functions, including proliferation, migration, and differentiation. Given their widespread distribution across the CNS, OPCs are increasingly recognized as active contributors to the development and progression of various neurological disorders. This review aims to present a detailed summary of the physiological and pathological functions of ion channels in OPCs, emphasizing their contribution to CNS dysfunction. We further highlight recent advances suggesting that ion channels in OPCs may serve as promising therapeutic targets across a broad range of disorders, including, but not limited to, multiple sclerosis (MS), spinal cord injury, amyotrophic lateral sclerosis (ALS), psychiatric disorders, Alzheimer’s disease (AD), and neuropathic pain (NP). Finally, we discuss emerging therapeutic strategies targeting OPC ion channel function, offering insights into potential future directions in the treatment of CNS diseases. Full article

Light-chain (AL) amyloidosis is a rare clonal plasma cell disorder that, if left untreated, carries a high risk of organ damage and mortality. Due to the rarity of the disease and the vulnerability of affected organ systems, treatment requires significant caution and nuance. As a plasma cell dyscrasia, AL amyloidosis treatment regimens are often adapted from those used for related disorders, particularly multiple myeloma. Despite substantial progress in research and drug development, optimal treatment strategies for relapsed/refractory (RR) AL amyloidosis remain unclear, and no FDA-approved therapies currently exist for this setting. B-cell maturation antigen (BCMA) has emerged as a promising immunotherapy target, with associated drug classes including antibody–drug conjugates, bispecific antibodies, and CAR-T cell therapies. These therapies have been extensively studied in relapsed/refractory multiple myeloma (RRMM) and are now being explored in the context of RR AL amyloidosis. This review summarizes the current literature on the efficacy and tolerability of BCMA-directed therapies in AL amyloidosis, with a particular emphasis on CAR-T cell therapy and offers comparisons to outcomes observed in RRMM. Full article

False cleavers (Galium spurium L.) is a broadleaf weed species that affects wheat productivity because of its strong competition for resources. It has developed resistance to acetolactate synthase (ALS) inhibitors, such as sulfonylureas and triazolopyrimidines, which are herbicides widely used in durum wheat. Integrated weed management programs can contribute to the control of this species and delay the evolution of herbicide resistance. Thus, a two-year field experiment was conducted to evaluate the effects of sowing time, variety, and herbicides on crop yield, density, and dry weight of a false cleavers population with resistance to ALS inhibitors. In both growing seasons, a split-split-plot design was used with three replicates. The sowing date was chosen as the main plot factor, durum wheat varieties as the subplot factor, and herbicides as the sub-subplot factor. The herbicide treatments were: (1) metsulfuron-methyl/bensulfuron-methyl (4/50 g a.i. ha⁻¹), (2) aminopyralid/florasulam (9.9/4.95 g a.i. ha⁻¹), (3) pyroxsulam and florasulam/2,4-D (18.75 + 4.725/225 g a.i. ha⁻¹), (4) 2,4-D/bromoxynil (633.15/601.2 g a.i. ha⁻¹), non-treated control, and hand-weeded control for the first season, while in the second season one more herbicide treatment (halauxifen-methyl/florasulam, 5.6/5.15 g a.i. ha⁻¹) was added. Herbicide application was performed on 10 March 2021 and 28 March 2022, when the crop was at the end of tillering and the beginning of stem elongation. The results showed that the density of false cleavers was not affected by the variety or sowing time. However, its dry weight was 17.3–23.4% higher in early sowing (16 November in 2020 and 8 November 2021) than in late sowing (24 December 2020 and 2 December 2021). Among the herbicides tested, 2,4-D/bromoxynil and halauxifen-methyl/florasulam effectively controlled false cleavers, showing greater efficacy in late sowing (>88%), which ultimately led to a higher yield. In conclusion, our two-year findings demonstrate that delayed sowing as part of an integrated weed management strategy can contribute to controlling resistant populations of false cleavers to ALS-inhibiting herbicides without affecting the quantity and quality of durum wheat yield in areas with a Mediterranean climate. Full article

Background/Objectives: The increasing clinical integration of 3D-printed definitive resins requires a comprehensive understanding of their physicochemical properties and adhesive behavior. However, there is limited evidence regarding the optimal surface treatment and bonding strategies for clear aligner composite attachments on these materials. This study aimed to characterize a 3D-printed definitive resin, evaluate the effects of surface treatments on its surface topography, and compare the shear bond strength (SBS) of the bonded attachments using different adhesive systems, both before and after thermocycling. Methods: A total of 120 rectangular specimens were fabricated from a 3D printed dental resin (Crowntec^®, SAREMCO Dental AG—Mexico City, Mexico). For physicochemical characterization, six samples underwent scanning electron microscopy/energy-dispersive spectroscopy, X-ray diffraction, and thermogravimetric analysis. To evaluate surface topography, 42 polished specimens were assigned to three groups: untreated (control), etched with 4% hydrofluoric acid (HFA), or sandblasted with 50 µm Al₂O₃ (AA). Each group was subdivided for SEM observation and surface roughness (Ra) measurement. For SBS testing, 72 additional samples received the same surface treatments and were further subdivided according to the adhesive system: Transbond™ XT Primer (TXT) or Single Bond Universal (SBU). Results: The AA group showed the highest Ra (2.21 ± 0.30 µm), followed by HFA (0.81 ± 0.20 µm) and control (0.07 ± 0.30 µm) (p < 0.001). The highest SBS was observed in the AA + SBU group, followed by AA + TXT. Conclusions: Sandblasting with Al₂O₃ particles, combined with a universal adhesive, significantly improved bond strength, suggesting a viable protocol for 3D printed definitive composites in aligner attachment applications. Full article

The titanium matrix composites (TMCs) fabricated via Directed Energy Deposition (DED) effectively overcome the issue of coarse columnar grains typically observed in additively manufactured titanium alloys. In this study, systematic annealing heat treatments were applied to in situ (TiB + TiC)/Ti-6Al-4V composites to refine the microstructure and tailor mechanical properties. The results reveal that the plate-like α phase in the as-deposited composites gradually transforms into an equiaxed morphology with increasing annealing temperature and holding time. Notably, when the annealing temperature exceeds 1000 °C, significant coarsening of the TiC phase is observed, while the TiB phase remains morphologically stable. Annealing promotes decomposition of acicular martensite and stress relaxation, leading to a reduction in hardness compared to the as-deposited state. However, the reticulated distribution of the TiB and TiC reinforcement phases contributes to enhanced tensile performance. Specifically, the as-deposited composite achieves a tensile strength of 1109 MPa in the XOY direction, representing a 21.6% improvement over the as-cast counterpart, while maintaining a ductility of 2.47%. These findings demonstrate that post-deposition annealing is an effective strategy to regulate microstructure and achieve a desirable balance between strength and ductility in DED-fabricated titanium matrix composites. Full article

Amyotrophic lateral sclerosis (ALS) stands as the leading neurodegenerative disorder affecting the motor system. One of the hallmarks of ALS, especially its bulbar form, is dysarthria, which significantly impairs the quality of life of ALS patients. This review provides a comprehensive overview of the current knowledge on the clinical manifestations, diagnostic differentiation, underlying mechanisms, diagnostic tools, and therapeutic strategies for the treatment of dysarthria in ALS. We update on the most promising digital speech biomarkers of ALS that are critical for early and differential diagnosis. Advances in artificial intelligence and digital speech processing have transformed the analysis of speech patterns, and offer the opportunity to start therapy early to improve vocal function, as speech rate appears to decline significantly before the diagnosis of ALS is confirmed. In addition, we discuss the impact of interventions that can improve vocal function and quality of life for patients, such as compensatory speech techniques, surgical options, improving lung function and respiratory muscle strength, and percutaneous dilated tracheostomy, possibly with adjunctive therapies to treat respiratory insufficiency, and finally assistive devices for alternative communication. Full article

Aluminum and its alloy magnetron sputtering targets, owing to their superior electrical/thermal conductivity and robust substrate adhesion, serve as critical materials in advanced electronics and information technologies. It is known that the microstructure of the target, including grain uniformity and crystallographic texture, directly affects the sputtering performance and the quality of the deposited thin film. Despite extensive research efforts, the review paper focused on the microstructure of aluminum target materials is still absent. In that context, the recent progress on the Al alloy target is reviewed, focusing on grain refinement and texture control strategies. The roles of alloying elements, such as Si, Cu, and rare-earth Sc and Nd, are described first. The two conventional manufacturing techniques of fabricating Al targets, including melting and powder metallurgy, are introduced. Then, studies on grain refinement by thermomechanical processing routes (hot/cold rolling, annealing and forging) are summarized. Lastly, texture engineering through deformation and heat treatment protocols (unidirectional/multidirectional rolling, deformation thickness, and composite deformation modes) is reviewed. By establishing the relationship between thermomechanical processing and microstructure, this review provides insights for designing high-performance aluminum targets tailored to next-generation advanced thin-film applications. Full article

Aluminum–air batteries are highly promising energy storage systems due to their high theoretical energy density, environmental friendliness, and cost-effectiveness. However, the self-corrosion of aluminum anodes in alkaline electrolytes remains a critical issue that significantly limits their practical application and commercialization. This review paper comprehensively examined various advanced strategies aimed at suppressing the self-corrosion of anodes in Al–air batteries. We summarized the fundamental principles of these approaches, their advantages and disadvantages, and provided an in-depth analysis of their effectiveness, supported by experimental and theoretical evidence. Specifically, this review systematically analyzes six major strategies for suppressing anode self-corrosion: anode alloying, electrolyte additives, novel electrolytes, anode surface treatment, battery structural design, and computer-aided investigation. Furthermore, we proposed the challenges and future research directions in this field. Overall, this review aimed to offer valuable insights and guidance for the development of high-performance, long-lasting Al–air batteries. Full article

The conventional spent lithium-ion batteries (LIBs) recycling method suffers from complex processes and excessive chemical consumption. Hence, this study proposes an electrochemical strategy for achieving reductant-free leaching of high-valence transition metals and efficient separation of valuable components from spent cathode sheets (CSs). An innovatively designed sandwich-structured electrochemical reactor achieved efficient reductive dissolution of cathode materials (CMs) while maintaining the structural integrity of aluminum (Al) foils in a dilute sulfuric acid system. Optimized current enabled leaching efficiencies exceeding 93% for lithium (Li), cobalt (Co), manganese (Mn), and nickel (Ni), with 88% metallic Al foil recovery via cathodic protection. Multi-scale characterization systematically elucidated metal valence evolution and interfacial reaction mechanisms, validating the technology’s tripartite innovation: simultaneous high metal extraction efficiency, high value-added Al foil recovery, and organic removal through single-step electrochemical treatment. The process synergized the dissolution of CM particles and hydrogen bubble-induced physical liberation to achieve clean separation of polyvinylidene difluoride (PVDF) and carbon black (CB) layers from Al foil substrates. This method eliminates crushing pretreatment, high-temperature reduction, and any other reductant consumption, establishing an environmentally friendly and efficient method of comprehensive recycling of battery materials. Full article

Background/Objectives: Treatment of locally advanced rectal cancer (LARC) very often requires a neoadjuvant multimodal approach. Neoadjuvant treatment (NAT) encompasses treatments like chemoradiotherapy (CRT), short-course radiotherapy (SCRT), radiotherapy (RT) or a combination of either of these two with additional induction or consolidation chemotherapy, namely total neoadjuvant treatment (TNT). In case of complete radiological and clinical response, the non-operative watch-and-wait strategy can be adopted in selected patients. This strategy is impacted by a regrowth rate of approximately 30%. Predicting biomarkers of tumor response to NAT could improve guidance of clinicians during clinical decision making, improving treatment outcomes and decreasing unnecessary treatment exposure. To this day, there is no validated biomarker to predict tumor response to any NAT strategies in clinical use. Most research focused on CRT neglects the study of other regimens. Methods: We conducted a narrative literature review which aimed at summarizing the status of biomarkers predicting tumor response to NAT other than CRT in LARC. Results: Two hundred and fourteen articles were identified. After screening, twenty-one full-text articles were included. Statistically significant markers associated with improved tumor response pre-treatment were as follows: low circulating CEA levels; BCL-2 expression; high cellular expression of Ku70, MIB-1(Ki-67) and EGFR; low cellular expression of VEGF, hPEBP4 and nuclear β-catenin; the absence of TP53, SMAD4, KRAS and LRP1B mutations; the presence of the G-allel of LCS-6; and MRI features such as the conventional biexponential fitting pseudodiffusion (Dp) mean value and standard deviation (SD), the variable projection Dp mean value and lymph node characteristics (short axis, smooth contour, homogeneity and Zhang et al. radiomic score). In the interval post-treatment and before surgery, significant markers were as follows: a reduction in the median value of circulating free DNA, higher presence of monocytic myeloid-derived suppressor cells, lower presence of CTLA4+ or PD1+ regulatory T cells and standardized index of shape changes on MRI. Conclusions: Responders to neoadjuvant SCRT and RT tended to have a tumor microenvironment with an immune–active phenotype, whereas responders to TNT tended to have a less active tumor profile. Although some biomarkers hold great promise, scarce publications, inconsistent results, low statistical power, and low reproducibility prevent them from reliably predicting tumor response following NAT. Full article