Search Results (98)

Super-resolution microscopy (SRM) has revolutionized our understanding of subcellular structures, including cell organelles and viruses. For human immunodeficiency virus (HIV), SRM has significantly advanced knowledge of viral structural biology and assembly dynamics. This review analyzes how SRM techniques (particularly PALM, STORM, STED, and SIM) have been applied over the past decade to study HIV structural components and assembly. By categorizing and comparing studies based on SRM methods, HIV components, and labeling strategies, we assess the strengths and limitations of each approach. Our analysis shows that PALM is most commonly used for live-cell imaging of HIV Gag, while STED is primarily used to study the viral envelope (Env). STORM and SIM have been applied to visualize various components, including Env, capsid, and matrix. Antibody labeling is prevalent in PALM and STORM studies, targeting Env and capsid, whereas fluorescent protein labeling is mainly associated with PALM and focused on Gag. A recent emphasis on Gag and Env points to deeper investigation into HIV assembly and viral membrane dynamics. Insights from SRM studies of HIV not only enhance virological understanding but also inform future research in therapeutic strategies and delivery systems, including extracellular vesicles. Full article

Carbon nanotubes (CNTs) are cylindrical nanostructures formed by rolling a graphene sheet—a hexagonal lattice of carbon atoms—into a tube. Based on the rolling direction, CNTs are categorized as armchair, zigzag, or chiral. The chiral vector, derived from the graphene lattice, defines the CNT’s structure, with chiral CNTs denoted by indices (n, m), where m > 0 and m ≠ n. The mechanical properties and structural stability of CNTs are highly sensitive to defects and impurities within their atomic framework. Among these, point defects such as single-atom vacancies are the most prevalent and can significantly degrade mechanical performance. These defects alter stress distribution, reduce stiffness, and impair strength, thereby limiting the functional reliability of CNTs in advanced applications such as nanocomposites, sensors, and electronic devices. This study examines the influence of vacancy defects on CNT mechanical behavior through a multiscale modeling framework. Molecular dynamics (MD) simulations are conducted using LAMMPS, with structural visualization via Visual Molecular Dynamics (VMD). Concurrently, a finite element (FE) model is developed in ANSYS, where the CNT is idealized as a space frame of elastic beam elements representing carbon–carbon bonds. The integration of atomistic and continuum approaches offers a comprehensive understanding of defect-induced mechanical degradation. The MD and FEM results are in strong agreement with findings in existing literature, validating the adopted methodology. These findings contribute valuable insights into the design and optimization of CNT-based materials for high-performance engineering applications. Full article

This study investigates the development and sensing profile of synthetic melanin nanoparticle-coated electrodes for the electrochemical detection of heavy metals, including lead (Pb), cadmium (Cd), cobalt (Co), zinc (Zn), nickel (Ni), and iron (Fe). Synthetic melanin films were prepared in situ by the deacetylation of diacetoxy indole (DAI) to dihydroxy indole (DHI), followed by the deposition of DHI monomers onto indium tin oxide (ITO) and glassy carbon electrodes (GCE) using cyclic voltammetry (CV), forming a thin layer of synthetic melanin film. The deposition process was characterized by electrochemical quartz crystal microbalance (EQCM) in combination with linear sweep voltammetry (LSV) and amperometry to determine the mass and thickness of the deposited film. Surface morphology and elemental composition were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). In contrast, Fourier-transform infrared (FTIR) and UV–Vis spectroscopy confirmed the melanin’s chemical structure and its polyphenolic functional groups. Differential pulse voltammetry (DPV) and amperometry were employed to evaluate the melanin films’ electrochemical activity and sensitivity for detecting heavy metal ions. Reproducibility and repeatability were rigorously assessed, showing consistent electrochemical performance across multiple electrodes and trials. A comparative analysis of ITO, GCE, and graphite electrodes was conducted to identify the most suitable substrate for melanin film preparation, focusing on stability, electrochemical response, and metal ion sensing efficiency. Finally, the applicability of melanin-coated electrodes was tested on in-house heavy metal water samples, exploring their potential for practical environmental monitoring of toxic heavy metals. The findings highlight synthetic melanin-coated electrodes as a promising platform for sensitive and reliable detection of iron with a sensitivity of 106 nA/ppm and a limit of quantification as low as 1 ppm. Full article

Placing printed conductive patterns onto nonplanar substrates is a challenging task. In this work, we tested a simple method for depositing inkjet-printed conductive patterns onto 3D-printed pieces with cavities and sharp edges. First, a silver nanoparticle ink was used to print conductive patterns onto a flexible and porous substrate made of electrospun polycaprolactone (PCL). Then, the printed patterns were transferred to 3D-printed pieces made of polylactic acid (PLA) by temperature-promoted adhesion. Finally, the printed patterns were cured to render them conductive. The influence of the number of printed layers on their electrical and mechanical properties was evaluated. The printed patterns were also transferred to flexible substrates, such as thermoplastic polyurethane (TPU) and polyethylene terephthalate (PET) sheets, achieving conductivity after curing. Moreover, the printed patterns were effective for modular interconnection among successive transferred patterns, since it was possible to achieve electrical contact between them during the transfer process. Full article

Protein-bound nano-injectable solutions represent a cutting-edge advancement in nanomedicine, offering a versatile platform for precise and controlled drug delivery. By leveraging the biocompatibility and functional versatility of proteins such as albumin, gelatin, and casein, these nano systems enhance drug solubility, prolong circulation time, and improve site-specific targeting, which are particularly beneficial in cancer and inflammatory diseases. This review provides a comprehensive overview of their formulation strategies, physicochemical characteristics, and biological behavior. Emphasis is placed on therapeutic applications, regulatory considerations, fabrication techniques, and the underlying mechanisms of drug–protein interactions. This review also highlights improved pharmacokinetics and reduced systemic toxicity, while also critically addressing challenges like immunogenicity, protein instability, and production scalability. Recent FDA-approved formulations and emerging innovations in precision medicine and theranostics underscore the transformative potential of protein-based nanosuspensions in next-generation drug delivery systems. Full article

The synthesis of calcium carbonate (CaCO₃) nanoparticles has gained an increasing interest due to their improved properties and diverse industrial applications. Among various synthesis techniques, the mechanochemical synthesis process has emerged as a promising route for nano-CaCO₃ synthesis. A high-energy ball mill is required for synthesizing nano-CaCO₃, whereas post-milling heat treatment facilitates completing the reaction that remains incomplete during milling. Post-milling heat treatment may also influence the properties of synthesized CaCO₃, which has not yet been thoroughly investigated. This study investigated the influence of post-milling heat treatment on the polymorphs, micromorphology, and particle size distribution of CaCO₃. The results indicated that the heat treatment of the as-milled powder enhanced the homogeneity of crystal polymorphs while maintaining the particle sizes within the nano-range (<100 nm). X-ray diffraction (XRD) analysis identified two polymorphs (vaterite and calcite) in samples obtained from different milling intensities. However, after heat treatment, all vaterite transformed into calcite. A bimodal particle size distribution was observed in CaCO₃ nanoparticles and was influenced by both the milling and heating intensities. It was observed that 60 min heat applied to 30 min as-milled powder was enough to produce nano-CaCO₃ (<50 nm) where the percentage of larger particles (<250 nm) became negligible (~1%). Micromorphology images confirmed the transformation of crystal polymorphs and the reduction in particle size. Full article

Nanostructured hybrid materials based on the combination of semiconductor QDs and GO are promising candidates for different optoelectronic and catalytic applications and being able to produce such hybrid materials in solution will expand their possible range of applications. In the current work, capping ligand-exchange procedures have been developed to replace the lead oleate normally found on the surface of PbS QDs synthesized by the popular hot-injection method. After the capping ligand-exchange process, the QDs are water soluble, which makes them soluble in most GO solutions. Solution-processed nanostructured hybrid materials based on GO flakes decorated with ligand-exchanged (EDT, TBAI and L-Cysteine) PbS QDs were synthesized by combining PbS QDs and GO solutions. Afterward, the resulting hybrid materials were thoroughly characterized by means of FTIR, XPS, Raman, UV-Vis-NIR and photoluminescence spectroscopy, as well as SEM and TEM techniques. The results indicate a clear surface chemistry variation in the capping ligand-exchanged PbS QDs, showing the presence of the exchanged ligand molecules. Thin films from the solution-processed nanostructured hybrid materials were deposited by the spin coating technique, and their optoelectronic properties were studied. Depending on the capping ligand molecule, the photoresponse and resistance of the thin films varied; the sample with the EDT ligand exchange showed the highest photoresponse and the lowest resistance. This surface chemistry had a direct effect on the charge carrier transfer and transport behavior of the nanostructured hybrid materials synthesized. These results show a novel and accessible route for synthesizing solution-processed and affordable nanostructured hybrid materials based on semiconductor QDs and GO. Additionally, the importance of the surface chemistry displayed by the PbS QDs and GO was clearly seen in determining the final optoelectronic properties displayed by their hybrid materials. Full article

Rice is a staple food for nearly half the world population. Rice cultivation relies heavily on urea fertilization. However, the use of urea is prone to significant losses and contributes to environmental pollution. This study was aimed at fabricating nitrogen-rich chitin nanomaterials and assessing their effects on the growth and yield of rice. Chitin nanofibers (ChNF), with widths ranging from 10 to 30 nm, were successfully isolated from shrimp shells by chemical pretreatment and mechanical fibrillation. Pot-grown rice plants were treated with various concentrations of ChNF and urea in a completely randomized design with five replicates. ChNF treatment resulted in plant height (97.33 ± 1.53 cm), tiller number (17.67 ± 1.15 hill⁻¹), straw yield (30.40 ± 1.93 g hill⁻¹), and harvest indexes comparable to those achieved with urea treatment at harvest (97.33 ± 1.53 cm, 17.00 ± 1.73 hill⁻¹, 26.47 ± 2.39 g hill⁻¹ and 44.12%, respectively). The grain yield using urea (22.70 g hill⁻¹) was almost identical to that achieved with 0.01% ChNF (22.22 g hill⁻¹), which may be attributable to the increased nitrate-nitrogen (N) and ammonium-N availability, reduced nitrogen loss, and enhanced microbial activity associated with 0.01% ChNF. The study findings indicate that shrimp-derived ChNF is a promising functional nanomaterial for rice cultivation, with potential as a partial or full replacement for urea in sustainable rice production. Full article

Nanotechnology offers effective solutions for removing contaminants and harmful bacteria from polluted water. This study synthesized copper nanoparticles using a carbohydrate-based bioflocculant derived from Proteus mirabilis AB 932526.1. The bioflocculant is a natural polymer that facilitates the aggregation of particles, enhancing the efficiency of the nanoparticle synthesis process. Characterization of the bioflocculant and copper nanoparticles was conducted using Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Energy-Dispersive X-ray Spectroscopy, Ultraviolet-Visible Spectroscopy, X-ray Diffraction, and Transmission Electron Microscopy techniques to assess their properties, flocculation efficiency, and antibacterial characteristics. The optimal flocculation efficiency of 80% was achieved at a copper nanoparticle concentration of 0.4 mg/mL, while a concentration of 1 mg/mL resulted in a lower efficiency of 60%. The effects of biosynthesized copper nanoparticles on human-derived embryonic renal cell cultures were also investigated, demonstrating that they are safe at lower concentrations. The copper nanoparticles effectively removed staining dyes such as safranin (90%), carbol fuchsine (88%), methylene blue (91%), methyl orange (93%), and Congo red (94%), compared to a blank showing only 39% removal. Furthermore, when compared to both chemical flocculants and bioflocculants, the biosynthesized copper nanoparticles exhibited significant nutrient removal efficiencies for nitrogen, sulfur, phosphate, and total nitrates in coal mine and Vulindlela domestic wastewater. Notably, these biosynthesized copper nanoparticles demonstrated exceptional antibacterial activity against both Gram-positive and Gram-negative bacteria. Full article

Self-emulsifying drug delivery systems (SEDDS) consist of isotropic mixtures of oils, surfactants, and solvents that after dispersion emulsify in the aqueous media of the gastrointestinal tract (GIT). SEDDS can deliver hydrophobic drugs, which could enhance their oral bioavailability by protecting them from precipitation and degradation. However, it is important to find the appropriate ratio of their excipients to produce emulsions with the desirable physicochemical characteristics. In this sense, Design of Experiments (DoE) approaches such as central composite design (CCD) and Box–Behnken design (BBD) can reduce the number of experiments necessary to determine the best composition and preparation process of a SEDDS formulation. Therefore, this article aims to discuss drug delivery through SEDDS and how DoE approaches can aid researchers in achieving product quality specifications and optimizing the formulation preparation processes. For this, the most recent and relevant papers were analyzed. This review is expected to guide future research directions for more rational development of SEDDS. Full article

Baru nut oil (Dipteryx alata Vogel) is a lipidic extract from a species endemic to the Cerrado biome, renowned for its antioxidant potential. This study aimed to develop a nanoemulsion containing baru nut oil (BNON) using lecithin and polysorbate 80, and to evaluate its antioxidant activity and cytotoxicity. The physicochemical properties of BNON were characterized, and its cytotoxicity was assessed in human erythrocytes and keratinocytes. Antioxidant activity was evaluated using the DPPH method and inhibition of AAPH-induced hemolysis. BNON exhibited a droplet size of 530.1 ± 20.48 nm, a polydispersity index of 0.496 ± 0.057, and a zeta potential of −35.7 ± 2.19 mV. Free baru nut oil showed no cytotoxicity to keratinocytes or erythrocytes within the concentration ranges tested (1.0–0.031 mg/mL and 0.8–0.006 mg/mL, respectively). In contrast, BNON displayed cytotoxic effects on keratinocytes and erythrocytes only at the highest tested concentration. Atomic force microscopy analysis of erythrocytes from the hemolysis assay revealed normal morphology for cells treated with free oil at 0.8 mg/mL, whereas cells treated with BNON at the same concentration exhibited a slightly widened concave center. Free oil at 0.8 mg/mL significantly protected erythrocytes from AAPH-induced hemolysis, while BNON did not. However, BNON (5 mg/mL) demonstrated free radical scavenging activity, quantified at 0.0074 mg Trolox equivalents/mg via the DPPH assay. These findings suggest that baru nut oil has potential as an antioxidant product, although further optimization of the nanoformulation is required. Full article

DNA encoding the 16S rRNA of bacteria is a type of nanometer-sized information storage that can be used to characterize bacterial communities in soils. Reading this molecular ’nano-archive’ is not only of interest for characterizing recent local ecological conditions but can also provide valuable information about human impacts on soils in the past. This is of great interest for archaeology and for understanding the ecological consequences of past human activities on recent ecological conditions. Powerful sequencing methods such as the Illumina process allow many different DNA sequences to be determined in parallel and provide very efficient data sets that reflect the composition of soil bacterial communities in topsoil layers as well as in translocated and covered soils of archaeological sites such as settlements, burials or workplaces. Here, a brief overview of recent developments in the use of these molecular nano-archives for the study of archaeological soil samples is given using typical examples. Full article

Pollution of freshwater by synthetic organic dyes is a major concern due to their high toxicity and mutagenicity. In this study, the degradation of Congo red (CR) and malachite green (MG) dyes was investigated using nanostructured Gd₂O₃. It was prepared using the coprecipitation method, using gadolinium nitrate and concentrated formic acid, with subsequent calcination at 600 °C. Its morphology corresponds to hollow porous microspheres with a size between 0.5 and 7.5 μm. The optical bandgap energy was determined by using the Tauc method, giving 4.8 eV. The degradation of the dyes was evaluated by UV-vis spectroscopy, which revealed that dissociative adsorption (in the dark) played a key role. It is explained by the cleavage and fragmentation of the organic molecules by hydroxyl radicals (^•OH), superoxide radicals (^•${\mathrm{O}}_2^{-}$) and other reactive oxygen species (ROS) produced on the surface of Gd₂O₃. For CR, the degradation percentage was ~56%, through dissociative adsorption, while UV light photocatalysis increased it to ~65%. For MG, these values were ~78% and ~91%, respectively. The difference in degradation percentages is explained in terms of the isoelectric point of solid (IEPS) of Gd₂O₃ and the electrical charge of the dyes. FTIR and XPS spectra provided evidence of the role of ROS in dye degradation. Full article

Interest in the use of nanoparticles in agriculture has grown in recent years due to their potential abilities across a range of applications that could increase agricultural production, improve the efficiency of nutrient delivery, or improve pest management. However, as with any application of nanomaterials, concern exists about potential risks to human health. Because many applications might result in the attachment of nanoparticles to produce surfaces, it is important to understand the conditions under which rinsing is likely to remove nanoparticles from surfaces and the degree to which they can be removed. This work explored the rinsing removal of two types of nanoparticles, titanium dioxide (TiO₂) and zinc oxide (ZnO), from spinach leaf surfaces in the absence and presence of biofilms based on extracellular polymeric substances (EPS). A hypothesis driving the work was that the presence of biofilms might enhance the retention of nanoparticles. The work combined experiments to determine surface energy parameters for fresh and rotten spinach, for use in extended DLVO (xDLVO) calculations, as well as direct rinsing experiments to explore nanoparticle removal from spinach surfaces. Nanoparticles were quantified using backscattered scanning electron microscopy using techniques developed for the work. Results of xDLVO calculations suggest that the presence of biofilms may actually be likely to reduce the retention of nanoparticles by produce surfaces, although this effect was not apparent in rinsing experiments, which exhibited similar removal of high-concentration TiO₂ from spinach leaves. Overall, nanoparticles deposited from high-concentration suspensions were found to be removed to a greater degree by rinsing, while those deposited from low-concentration suspensions exhibited no apparent release, even under conditions where release might be favored. Full article

While microparticles can be removed by a filtration step at a drinking water treatment plant (DWTP), engineered nanoparticles (ENPs), which are widely used in industry, commerce and households, pose a major problem due to their special properties, e.g., size, reactivity and polarity. In addition, many ENPs exhibit toxic potential, which makes their presence in drinking water undesirable. Therefore, this study investigated the removal of ENPs in the laboratory and at a pilot-scale DWTP. Eight ENPs were synthesized and tested for stability in different types of water. Only three of them were stable in natural water: cetyltrimethylammonium bromide-coated gold (CTAB/AuNPs), polyvinylpyrrolidone-stabilized gold and silver nanoparticles (PVP/AuNPs, PVP/AgNPs). Their retention on quartz sand, silica gel and fresh anthracite was low, but CTAB/AuNPs could be retained on fresh river sand and thus should not overcome riverbank filtration, while PVP/AuNPs and PVP/AgNPs showed no retention and may be present in raw water. During ozonation, PVP/AuNPs remained stable while PVP/AgNPs were partially degraded. The advanced oxidation process (AOP) was less effective than ozone. PVP/AgNPs were almost completely retained on the pilot plant anthracite sand filter coated with manganese(IV) oxide and ferrihydrite from raw water treatment. PVP/AuNPs passed the filter with no retention. In contrast to PVP/AuNPs, PVP/AgNPs and CTAB/AuNPs were also retained on activated carbon. The integration of a flocculation step with iron(III) salts can improve ENP removal, with PVP/AuNPs requiring higher flocculant doses than PVP/AgNPs. PVP/AuNPs, in particular, are well-suited for testing the effectiveness of water treatment. Further data on the occurrence of stable ENPs in raw water and their behavior during water treatment are needed to perform a risk assessment and derive the measures. Full article