Search Results (16)

Catalytic reactions in producing biofuels often face issues such as low product yield, low selectivity to preferred products and serious environmental issues which leads to the exploration of green technologies. Microwave technology is one of the green technologies that is widely applied in the field such as medical, food, signal processing or navigation, and has been reviewed for its potential in the catalytic reactions for biofuel production. With the application of microwave technology, its unique heating mechanism consists of magnetic field energy and electric field energy that enables the selective heating of materials, allowing rapid reaction and enhancement of catalytic performance of catalysts. In general, this review has discussed on the fundamentals and mechanisms of microwave technology with an in-depth discussion on the application of microwave-absorbing catalysts for biofuel production, especially in ammonia synthesis, bio-oil and 5-HMF production as well as methanation. Lastly, the challenges and future prospect of microwave-absorbing catalysts are included as well. Full article

Global warming and the depletion of fossil fuels have spurred many efforts in the quest for finding renewable, alternative sources of fuels, such as biodiesel. Due to its auxiliary functions in areas such as carbon dioxide sequestration and wastewater treatment, the potential of microalgae as a feedstock for biodiesel production has attracted a lot of attention from researchers all over the world. Major improvements have been made from the upstream to the downstream aspects related to microalgae processing. One of the main concerns is the high cost associated with the production of biodiesel from microalgae, which includes drying of the biomass and the subsequent lipid extraction. These two processes can be circumvented by applying direct or in situ transesterification of the wet microalgae biomass, hence substantially reducing the cost. In situ transesterification is considered as a significant improvement to commercially produce biodiesel from microalgae. This review covers the methods used to extract lipids from microalgae and various in situ transesterification methods, focusing on recent developments related to the process. Nevertheless, more studies need to be conducted to further enhance the discussed in situ transesterification methods before implementing them on a commercial scale. Full article

There are several methods of biomass conversion, including hydrothermal liquefaction (HTL). The implementation of microwave technology in the HTL process is still new, especially on the conversion of marine biomass into bio-crude. In this work, the macroalgae Chaetomorpha sp. was used as the biomass feedstock to produce phenolic-rich bio-oil through microwave-assisted HTL. Chaetomorpha sp. was abundantly found in Malaysia, creating a green tides issue. By utilizing these algae, the green tide issue can be solved and value-added bio-oil is obtained. However, bio-oil from macroalgae has a relatively low heating value, restricting its fuel application. Therefore, it is suggested to be used for bio-polymer synthesis, including bio-based phenol formaldehyde. In this study, the effect of different parameters, such as reaction temperature, preloaded pressure, water-to-algal biomass ratio, and holding time, on both the bio-oil yield and phenolic yield was evaluated. Folin–Ciocalteu method was introduced as the phenolic determination method and the optimal conditions were located by using Response Surface Methodology (RSM). As a results, an optimal biodiesel yield and phenolic yield of 21.47 wt% and 19.22 wt% Gallic Acid Equivalent was obtained at a reaction temperature of 226 °C, 42 bar preloaded pressure and 30:1 water-to-algal biomass ratio after 79 min. Sensitivity analysis also concluded that the water-to-algal biomass ratio is the most influential factor, followed by the preloaded pressure. The FTIR spectrum of the bio-oil produced indicated the presence of different functional group of compounds. In short, Chaetomorpha sp. has been successfully converted into valuable bio-oil through microwave-assisted HTL. Full article

High energy demand from the market due to the rapid increment of the human population worldwide has urged society to explore alternatives to replace non-renewable energy. Renewable diesel produced from biomass could be the next potential energy source for its high stability, long-term storage, and comparable performance with diesel fuels. In producing renewable diesel, the application of catalyst is essential, and the catalyst support is synthesized with the catalyst to enhance the reaction rate and catalytic properties. In this review, the type of catalyst support will be reviewed along with a brief introduction to biodiesel and renewable diesel production, especially focusing on zeolites as the catalyst support. The enhancement of catalyst support will be critically discussed to improve the catalytic performance of support in renewable diesel production and important aspects such as the stability and recyclability of the supported catalyst are included. The application of the supported catalyst in increasing the selectivity and yield of renewable diesel is significant, in which the catalytic properties depend on the interaction between catalyst and catalyst support. The supported catalyst as a favorable substance to assist in enhancing renewable diesel yield could lead to a sustainable and greener future for the biofuel industry in Malaysia. Full article

Hybrid systems have gained significant attention among researchers and scientists worldwide due to their ability to integrate solar cells and supercapacitors. Subsequently, this has led to rising demands for green energy, miniaturization and mini-electronic wearable devices. These hybrid devices will lead to sustainable energy becoming viable and fossil-fuel-based sources of energy gradually being replaced. A solar photovoltaic (SPV) system is an electronic device that mainly functions to convert photon energy to electrical energy using a solar power source. It has been widely used in developed countries given that they have advanced photovoltaic (PV) technology that reduces dependence on fossil fuels for energy generation. Furthermore, a supercapacitor is an alternative solution for replacing heavy batteries and it is a system with a prominent high power density and a long life cycle. Its unique properties of high capacitance with low voltage limits lead to this highly in-demand material being incorporated into goods and services that are produced by the electrical and electronics industries. It is another option for grid-based power or large batteries. Since supercapacitors have the ability to store huge amounts of energy, they allow for a novel system that integrates supercapacitors with solar cells in which energy generation and energy storage are combined into one system. This paper explores the common materials that are used for solar cells and supercapacitors, the working mechanisms, the effectiveness of the integrated device and the technical challenges that are encountered when refining this device. Hence, this review serves as a guide for choosing the right materials and methods in order to produce an integrated PV solar cell–energy storage device for various applications. Full article

In this study, the response surface methodology (RSM) optimization technique was employed for investigating the impact of hydroxy gas (HHO) enriched diesel on performance, acoustics, smoke and exhaust gas emissions of the compression ignition (CI) engine. The engine was operated within the HHO flow rate range of 0–10 L/min and engine loads of 15%, 30%, 45%, 60% and 75%. The results disclosed that HHO concentration and engine load had a substantial influence on the response variables. Analysis of variance (ANOVA) results of developed quadratic models indicated the appropriate fit for all models. Moreover, the optimization of the user-defined historical design of an experiment identified an optimum HHO flow rate of 8 L/min and 41% engine load, with composite desirability of 0.733. The responses corresponding to optimal study factors were 25.44%, 0.315 kg/kWh, 117.73 ppm, 140.87 ppm, 99.37 dB, and 1.97% for brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), CO, HC, noise, and smoke, respectively. The absolute percentage errors (APEs) of RSM were predicted and experimental results were below 5%, which vouched for the reliable use of RSM for the prediction and optimization of acoustics and smoke and exhaust emission characteristics along with the performance of a CI engine. Full article

The rapid spread of coronavirus disease 2019 (COVID-19) in early 2020 prompted a global lockdown from March to July 2020. Due to strict lockdown measures, many countries experienced economic downturns, negatively affecting many industries including energy, manufacturing, agriculture, finance, healthcare, food, education, tourism, and sports. Despite this, the COVID-19 pandemic provided a rare opportunity to observe the impacts of worldwide lockdown on global carbon dioxide (CO₂) emissions and climate change. Being the main greenhouse gas responsible for rising global surface temperature, CO₂ is released to the atmosphere primarily by burning fossil fuels. Compared to 2019, CO₂ emissions for the world and Malaysia decreased significantly by 4.02% (−1365.83 MtCO₂) and 9.7% (−225.97 MtCO₂) in 2020. However, this is insufficient to cause long-term impacts on global CO₂ levels and climate change. Therefore, in this review, we explored the effects of worldwide lockdown on global CO₂ levels, the impacts of national lockdown on Malaysia’s CO₂ emissions, and the influence of climate change in Malaysia. Full article

In this study, coconut oils have been transesterified with ethanol using microwave technology. The product obtained (biodiesel and FAEE) was then fractional distillated under vacuum to collect bio-kerosene or bio-jet fuel, which is a renewable fuel to operate a gas turbine engine. This process was modeled using RSM and ANN for optimization purposes. The developed models were proved to be reliable and accurate through different statistical tests and the results showed that ANN modeling was better than RSM. Based on the study, the optimum bio-jet fuel production yield of 74.45 wt% could be achieved with an ethanol–oil molar ratio of 9.25:1 under microwave irradiation with a power of 163.69 W for 12.66 min. This predicted value was obtained from the ANN model that has been optimized with ACO. Besides that, the sensitivity analysis indicated that microwave power offers a dominant impact on the results, followed by the reaction time and lastly ethanol–oil molar ratio. The properties of the bio-jet fuel obtained in this work was also measured and compared with American Society for Testing and Materials (ASTM) D1655 standard. Full article

Carbon dioxide is the most influential gas in greenhouse gasses and its amount in the atmosphere reached 412 µmol/mol in August 2020, which increased rapidly, by 48%, from preindustrial levels. A brand-new chemical industry, namely organic chemistry and catalysis science, must be developed with carbon dioxide (CO₂) as the source of carbon. Nowadays, many techniques are available for controlling and removing carbon dioxide in different chemical processes. Since the utilization of CO₂ as feedstock for a chemical commodity is of relevance today, this study will focus on how to increase CO₂ solubility in culture media used for growing microbes. In this work, the CO₂ solubility in a different medium was investigated. Sodium hydroxide (NaOH) and monoethanolamine (MEA) were added to the culture media (3.0 g/L dipotassium phosphate (K₂HPO₄), 0.2 g/L magnesium chloride (MgCl₂), 0.2 g/L calcium chloride (CaCl₂), and 1.0 g/L sodium chloride (NaCl)) for growing microbes in order to observe the difference in CO₂ solubility. Factors of temperature and pressure were also studied. The determination of CO₂ concentration in the solution was measured by gas analyzer. The result obtained from optimization revealed a maximum CO₂ concentration of 19.029 mol/L in the culture media with MEA, at a pressure of 136.728 kPa, operating at 20.483 °C. Full article

As a promising alternative renewable liquid fuel, biodiesel production has increased and eventually led to an increase in the production of its by-product, crude glycerol. The vast generation of glycerol has surpassed the market demand. Hence, the crude glycerol produced should be utilized effectively to increase the viability of biodiesel production. One of them is through crude glycerol upgrading, which is not economical. A good deal of attention has been dedicated to research for alternative material and chemicals derived from sustainable biomass resources. It will be more valuable if the crude glycerol is converted into glycerol derivatives, and so, increase the economic possibility of the biodiesel production. Studies showed that glycerol carbonate plays an important role, as a building block, in synthesizing the glycerol oligomers at milder conditions under microwave irradiation. This review presents a brief outline of the physio-chemical, thermodynamic, toxicological, production methods, reactivity, and application of organic carbonates derived from glycerol with a major focus on glycerol carbonate and dimethyl carbonate (DMC), as a green chemical, for application in the chemical and biotechnical field. Research gaps and further improvements have also been discussed. Full article

The environmental impacts and high long-term costs of poor waste disposal have pushed the industry to realize the potential of turning this problem into an economic and sustainable initiative. Anaerobic digestion and the production of biogas can provide an efficient means of meeting several objectives concerning energy, environmental, and waste management policy. Biogas contains methane (60%) and carbon dioxide (40%) as its principal constituent. Excluding methane, other gasses contained in biogas are considered as contaminants. Removal of these impurities, especially carbon dioxide, will increase the biogas quality for further use. Integrating biological processes into the bio-refinery that effectively consume carbon dioxide will become increasingly important. Such process integration could significantly improve the sustainability of the overall bio-refinery process. The biogas upgrading by utilization of carbon dioxide rather than removal of it is a suitable strategy in this direction. The present work is a critical review that summarizes state-of-the-art technologies for biogas upgrading with particular attention to the emerging biological methanation processes. It also discusses the future perspectives for overcoming the challenges associated with upgradation. While biogas offers a good substitution for fossil fuels, it still not a perfect solution for global greenhouse gas emissions and further research still needs to be conducted. Full article

The potential of Caulerpa lentillifera, Gracilaria coronopifolia and Chaetomorpha linum, as biomass feedstock was investigated in this study. It was concluded that seaweed is more suitable for bio-based products synthesis, i.e., bioplastic and bio-lubricants, instead of biofuels due to its relatively low calorific value (~12 MJ/kg). Since seaweed has high moisture content (~80%), hydrothermal liquefaction is recommended, and its efficiency can be further enhanced through microwave technology. Besides, it is found that the thermal degradation of seaweed was best described with the reaction order of 1. The kinetic results also indicated that seaweed consists of lower activation energy (<30 kJ/mol) in comparison with terrestrial biomass (50–170 kJ/mol). Hence, seaweed has a high potential to be used as biomass feedstock, particularly Chaetomorpha linum, as it has no conflict with other interests. Lastly, acetic-acid pre-treatment was suggested to be an optional process in order to increase the algal conversion efficiency as it can reduce up to 25% of ash content. Full article

Nigeria, being the world’s largest importer of diesel-powered gen-sets, is expected to invest in bio-fuels in the future. Hence, it is important to examine the thermal properties and synergy of wastes for potential downstream resource utilization. In this study, thermal conversion as a route to reduce the exploding volume of wastes from sachet-water plastic (SWP) and oil palm empty fruit bunch (OPEFB) biomass was studied. Thermogravimetric (TGA) and subsequent differential scanning calorimeter (DSC) was used for the analysis. The effect of heating rate at 20 °C min⁻¹ causes the increase of activation energy of the decomposition in the first-stage across all the blends (0.96 and 16.29 kJ mol⁻¹). A similar phenomenon was seen when the heating rate was increased from 10 to 20 °C min⁻¹ in the second-stage of decomposition. Overall, based on this study on the synergistic effects during the process, it can be deduced that co-pyrolysis can be an effective waste for energy platform. Full article

The management of solid waste presents a challenge for developing countries as the generation of waste is increasing at a rapid and alarming rate. Much awareness towards the sustainability and technological advances for solid waste management has been implemented to reduce the generation of unnecessary waste. The recycling of this waste is being applied to produce valuable organic matter, which can be used as fertilizers or amendments to improve the soil structure. This review studies the sustainable transformation of various types of biomass waste such as animal manure, sewage sludge, municipal solid waste, and food waste, into organic fertilizers and their impact on waste minimization and agricultural enhancement. The side effects of these organic fertilizers towards the soil are evaluated as the characteristics of these fertilizers will differ depending on the types of waste used, in addition to the varying chemical composition of the organic fertilizers. This work will provide an insight to the potential management of biomass waste to be produced into organic fertilizer and the advantages of substituting chemical fertilizer with organic fertilizer derived from the biomass waste. Full article

Monitoring the condition of transformer oil is considered to be one of the preventive maintenance measures and it is very critical in ensuring the safety as well as optimal performance of the equipment. Various oil properties and contents in oil can be monitored such as acidity, furanic compounds and color. The current method is used to determine the color index (CI) of transformer oil produces an error of 0.5 in measurement, has high risk of human handling error, additional expense such as sampling and transportations, and limited samples can be measured per day due to safety and health reasons. Therefore, this work proposes the determination of CI of transformer oil using ultraviolet-to-visible (UV-Vis) spectroscopy. Results show a good correlation between the CI of transformer oil and the absorbance spectral responses of oils from 300 nm to 700 nm. Modeled equations were developed to relate the CI of the oil with the cutoff wavelength and absorbance, and with the area under the curve from 360 nm to 600 nm. These equations were verified with another set of oil samples. The equation that describes the relationship between cutoff wavelength, absorbance and CI of the oil shows higher accuracy with root mean square error (RMSE) of 0.1961. Full article