Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Institute of Machine Design, Cracow University of Technology, ul. Warszawska 24, 31-155 Cracow, Poland
Interests: Mechanical Testing; stress and strain analysis; fatigue; fracture mechanics; multiaxial high-cycle fatigue criteria; failure analysis; contact mechanics; finite element analysis; digital image correlation
Interests: Mechanical Testing; stress and strain analysis; fatigue; fracture mechanics; multiaxial high-cycle fatigue criteria; failure analysis; contact mechanics; finite element analysis; digital image correlation
Department of Mechanics and Machine Design, Opole University of Technology, Mikolajczyka 5, 45-271 Opole, Poland
Interests: fracture mechanics; explosive welding, fatigue crack growth, fatigue life, crack paths; fatigue; failure analysis; metallography; welding; fatigue crack growth; fatigue life
Interests: fracture mechanics; explosive welding, fatigue crack growth, fatigue life, crack paths; fatigue; failure analysis; metallography; welding; fatigue crack growth; fatigue life
Department of Materials, Environmental Sciences and Urban Planning SIMAU, Università Politecnica delle Marche, 60131 Ancona, Italy
Interests: development of sustainable materials for buildings; waste; industrial byproducts; sludge treatment-valorization-reuse; critical raw materials; materials science and technologies; environmental monitoring
Interests: development of sustainable materials for buildings; waste; industrial byproducts; sludge treatment-valorization-reuse; critical raw materials; materials science and technologies; environmental monitoring
Electrical Engineering and Computer Science, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 USA
Interests: carbon nanotubes; graphene; metal oxides; sensors/biosensors; material growth; characterization; plasma generation; field emission/ionization; X-rays; acoustic wave (BAW) sensor; bulk acoustic wave resonators
Interests: carbon nanotubes; graphene; metal oxides; sensors/biosensors; material growth; characterization; plasma generation; field emission/ionization; X-rays; acoustic wave (BAW) sensor; bulk acoustic wave resonators
Department of Process and Environmental Engineering, University of Oulu, 90570 Oulu, Finland
Interests: data-based modelling; measurements; monitoring; control; optimisation; steel making; blast furnace; basic oxygen furnace
Interests: data-based modelling; measurements; monitoring; control; optimisation; steel making; blast furnace; basic oxygen furnace
Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Czestochowa, Poland
Interests: plastic working; asymmetric rolling; Microstructure; plastic deformation; sheet metal forming; viscoelasticity
Interests: plastic working; asymmetric rolling; Microstructure; plastic deformation; sheet metal forming; viscoelasticity
Department of Machining, Assembly and Engineering Metrology, VŠB-Technical University of Ostrava, 17. Listopadu 15/2172, 708 33 Ostrava Poruba, Czech Republic
Interests: machining; programing of NC/CNC cutting machines; CAD/CAM systems; engineering metrology; unconventional methods of machining; cutting tools testing
Interests: machining; programing of NC/CNC cutting machines; CAD/CAM systems; engineering metrology; unconventional methods of machining; cutting tools testing
Department of Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology, Meguro-ku 152-8550, Tokyo
Interests: corrosion and protection; electrochemistry; molten salt corrosion of stainless steels
Interests: corrosion and protection; electrochemistry; molten salt corrosion of stainless steels
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, N2L 3G1, Canada
Interests: physical metallurgy; welding and joining; steel, aluminum and magnesium alloys; microstructure characterization, electron microscopy; strength of materials; additive manufacturing; cold and thermal spray
Interests: physical metallurgy; welding and joining; steel, aluminum and magnesium alloys; microstructure characterization, electron microscopy; strength of materials; additive manufacturing; cold and thermal spray
Institute of Materials Science, Faculty of Materials Science and Technology, Slovak University of Technology, 917 24, Trnava, Slovakia
Interests: hard coatings; nanocomposite and multilayer coatings; PVD technologies; cathodic arc evaporation; magnetron sputtering; material and surface characterization; failure analysis; scanning electron microscopy (EDS, WDS and EBSD); X-ray diffraction; laser scanning confocal microscopy; metalography and microstructures; material structure-property relationships; residual stresses; mechanical properties; high speed steels; laser and electron beam welding; tribology and wear
Interests: hard coatings; nanocomposite and multilayer coatings; PVD technologies; cathodic arc evaporation; magnetron sputtering; material and surface characterization; failure analysis; scanning electron microscopy (EDS, WDS and EBSD); X-ray diffraction; laser scanning confocal microscopy; metalography and microstructures; material structure-property relationships; residual stresses; mechanical properties; high speed steels; laser and electron beam welding; tribology and wear
Department of Mechanical Engineering, University of Turku, FI-20014 Turku, Finland
Interests: laser processing; metal additive manufacturing; laser welding; laser hybrid welding; laser prototyping
Interests: laser processing; metal additive manufacturing; laser welding; laser hybrid welding; laser prototyping
Laboratory of Plasma Processes in Metallurgy and Materials treatment, A.A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Science, 49 Leninsky Prosp, 119334 Moscow, Russia
Interests: thermal plasma processes; Powder Metallurgy; nanopowders synthesis; powders spheroidization
Interests: thermal plasma processes; Powder Metallurgy; nanopowders synthesis; powders spheroidization
CENIM-CSIC, MATERALIA Group, Madrid, Spain
Interests: steels; solid-solid phase transformations; microstructural/mechanical characterization
Interests: steels; solid-solid phase transformations; microstructural/mechanical characterization
Department of Mechanical Engineering (EPSEVG), Universitat Politècnica de Catalunya, 08800 Barcelona, Spain
Interests: materials characterization; surface engineering; machine tool; hybrid techniques; advance manufacturing processes
Interests: materials characterization; surface engineering; machine tool; hybrid techniques; advance manufacturing processes
Bioproducts, Sciences & Engineering Laboratory (BSEL), Washington State University, Tri-Cities, 2710 Crimson Way, Richland, WA 99354, USA
Interests: biomass conversion to fuel/chemicals; Heterogeneous Catalysis; electrocatalysis; Hydrogen production/storage; hydrogen carrier
Interests: biomass conversion to fuel/chemicals; Heterogeneous Catalysis; electrocatalysis; Hydrogen production/storage; hydrogen carrier
Erich Schmid Institute of Materials Science, Leoben, Austria
Interests: bulk metallic glasses; hydrogen sorption; methanol oxidation; electrocatalysis; thin-film assemblies; crystallization kinetics; thermoplastic forming; metallic glass synthesis; mechanical and structural properties of advanced alloys
Interests: bulk metallic glasses; hydrogen sorption; methanol oxidation; electrocatalysis; thin-film assemblies; crystallization kinetics; thermoplastic forming; metallic glass synthesis; mechanical and structural properties of advanced alloys
University of Windsor
401 Sunset Ave,
Windsor, ON
N9B 3P4
Canada
Interests: metal forming; numerical modelling; steel; dual phase steel; trip steel; characterization; simulation; damage; fracture; Failure; formability; LS_Dyna; damage model; GTN; Rousselier; JC; Finite Element
Interests: metal forming; numerical modelling; steel; dual phase steel; trip steel; characterization; simulation; damage; fracture; Failure; formability; LS_Dyna; damage model; GTN; Rousselier; JC; Finite Element
Silesian University of Technology, Department of Metallurgy and Recycling, Krasińskiego 8, 40-019 Katowice, Poland
Interests: aluminium refining; modeling of metallurgical processes; extractive metallurgy; recovery of metals from waste; spent autocatalyst; leaching processes; zinc coatings; corrosions processes
Interests: aluminium refining; modeling of metallurgical processes; extractive metallurgy; recovery of metals from waste; spent autocatalyst; leaching processes; zinc coatings; corrosions processes
Faculty of Engineering, “Dunarea de Jos” University of Galati, 800008 Galati, Romania
Interests: manufacturing; welding technologies; welding processes; joining technologies; materials subjected to welding; welding modelling and simulation
Interests: manufacturing; welding technologies; welding processes; joining technologies; materials subjected to welding; welding modelling and simulation
Escuela Politécnica Superior de Alcoy, Universitat Politecnica de Valencia, Plaza Ferrandiz y Carbonell, 103801 Alcoy, Spain
Interests: Tribology
Interests: Tribology
Department of Physics, Aristotle University of. Thessaloniki, 54124 Thessaloniki, Greece
Interests: laser materials microprocessing; laser ablation; laser-induced plasma plume; atomic and molecular optical spectroscopy; nanoparticles or nanomaterials by laser ablation; nanocomposites; nanomagnetism; semiconductor optoelectronics; thin films technology
Interests: laser materials microprocessing; laser ablation; laser-induced plasma plume; atomic and molecular optical spectroscopy; nanoparticles or nanomaterials by laser ablation; nanocomposites; nanomagnetism; semiconductor optoelectronics; thin films technology
Materials Processing and Ecometallurgy Department, Materials Science and Engineering Faculty, University POLITEHNICA of Bucharest, 313 Splaiul Independentei, 060042 Bucharest, Romania
Interests: biomaterials; nanostructured materials; modeling and simulation; microstructural characterization; metallography; metal matrix composites; extrusion; steels; titanium alloys; fractography; aluminium alloys; finite element analysis; mechanical testing; magnesium alloys; plastic deformation; severe plastic deformation; ultrafine-grained materials; heat treatments; forging; equal channel angular pressing; thermomechanical processing; materials synthesis and characterization
Interests: biomaterials; nanostructured materials; modeling and simulation; microstructural characterization; metallography; metal matrix composites; extrusion; steels; titanium alloys; fractography; aluminium alloys; finite element analysis; mechanical testing; magnesium alloys; plastic deformation; severe plastic deformation; ultrafine-grained materials; heat treatments; forging; equal channel angular pressing; thermomechanical processing; materials synthesis and characterization
Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate Tee 5, 19086 Tallinn, Estonia
Interests: cermet; hardmetal; friction stir welding; diffusion-controlled wear; adhesive wear; multilayer coating; high temperature tribology; nano-scratch; PVD coatings: nACRo; nACo; AlCrN; tialn; TiCN; residual stresses; tube length variation; curvature method; indentational surface fatigue; industrial field wear tests
Interests: cermet; hardmetal; friction stir welding; diffusion-controlled wear; adhesive wear; multilayer coating; high temperature tribology; nano-scratch; PVD coatings: nACRo; nACo; AlCrN; tialn; TiCN; residual stresses; tube length variation; curvature method; indentational surface fatigue; industrial field wear tests
Institute of Metals and Technology, Lepi pot 11, SI-1000 Ljubljana, Slovenia
Interests: material characterization; microstructure; SEM analysis; metals; alloys; thin layer; electron microscopy; ionic transformation of surfaces
Interests: material characterization; microstructure; SEM analysis; metals; alloys; thin layer; electron microscopy; ionic transformation of surfaces
CanmetMATERIALS, Natural Resources Canada, Hamilton, ON L8P 0A5, Canada
Interests: electron diffraction; orientation relationship; XRD; steels; aluminum alloys; high entropy alloys
Interests: electron diffraction; orientation relationship; XRD; steels; aluminum alloys; high entropy alloys
Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, 3 Pulka Str., LV-1007 Riga, Latvia
Interests: modern ceramics; materials; material characterization; Microstructure; mechanical properties; foams; syntactic foams; metal matrix composites; processing; non-ferrous metal-based composite; additive manufacturing
Interests: modern ceramics; materials; material characterization; Microstructure; mechanical properties; foams; syntactic foams; metal matrix composites; processing; non-ferrous metal-based composite; additive manufacturing
Mechanical Engineering, Texas A&M University at Qatar, Doha, Qatar
Interests: severe plastic deformation; magnesium alloys; foams; metal matrix composites; high strain rate testing
Interests: severe plastic deformation; magnesium alloys; foams; metal matrix composites; high strain rate testing
Department of Production Engineering, Faculty of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka, 20-618 Lublin, Poland
Interests: laser cutting; centrifugal shot peening; surface roughness; microstructure; microhardness; residual stress
Interests: laser cutting; centrifugal shot peening; surface roughness; microstructure; microhardness; residual stress
Chair of Production Engineering, Cracow University of Technology, Al. Jana Pawla II 37, 31-864 Krakow, Poland
Interests: electro physical and chemical machining; electrochemical machining; electrodischarge machining; hybrid machining
Interests: electro physical and chemical machining; electrochemical machining; electrodischarge machining; hybrid machining
Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology in Cracow, 30 Mickiewicz Av, 30-059 Cracow, Poland
Interests: metal forming; Thermomechanical Processing; forging; bulk forming techniques; magnesium wrought alloys; physical and numerical modeling of metal forming processes
Interests: metal forming; Thermomechanical Processing; forging; bulk forming techniques; magnesium wrought alloys; physical and numerical modeling of metal forming processes
