Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Applied Sciences Laboratory, Washington State University, Spokane, WA 99164, USA
Interests: polymer composites; coatings; materials
Interests: polymer composites; coatings; materials
Saint Petersburg State University, Research Centre for Innovative Technologies of Composite Nanomaterials, Universitetskii pr. 26, Saint Petersburg 198504
Interests: atomic layer deposition; thin films; nanofilms; coatings; medical implants; surface science; titanium; biomaterials; osseointegration
Interests: atomic layer deposition; thin films; nanofilms; coatings; medical implants; surface science; titanium; biomaterials; osseointegration
Faculty of Mechanical Engineering, University of Žilina, Univerzitná 1, 01026 Žilina, Slovakia
Interests: non-destructive evaluation; Machining
Interests: non-destructive evaluation; Machining
Department of Aircraft and Space Vehicles, Technical University of Madrid (UPM), 28040 Madrid, Spain
Interests: finite element analysis; structural dynamics; computational mechanics; material constitutive modeling
Interests: finite element analysis; structural dynamics; computational mechanics; material constitutive modeling
Welding Technologies Department, Łukasiewicz Research Network-Institut of Welding, 44-100 Gliwice, Poland
Interests: arc welding (TIG (GTAW), A-TIG, MIG/MAG (GMAW), PAW, hardfacing); stainless steel (austenitic SS, duplex SS, lean duplex); Ti and Ni alloys; corrosion of SS weld; welding consumables (metal and flux cored wires, covered electrodes); welding in the nuclear industry or welding of nuclear equipment
Interests: arc welding (TIG (GTAW), A-TIG, MIG/MAG (GMAW), PAW, hardfacing); stainless steel (austenitic SS, duplex SS, lean duplex); Ti and Ni alloys; corrosion of SS weld; welding consumables (metal and flux cored wires, covered electrodes); welding in the nuclear industry or welding of nuclear equipment
Department for Materials and Manufacturing Engineering, Politehnica University Timisoara, Bd. M. Viteazul nr. 1, RO-300222 Timisoara, Romania
Interests: metal matrix composites; titanium alloys; bulk metallic glass
Interests: metal matrix composites; titanium alloys; bulk metallic glass
Department of Materials Science and Engineering, Kyoto University, Kyoto 606-8501, Japan
Interests: martensitic transformations; magnetic materials; phase equilibrium; shape memory alloys
Interests: martensitic transformations; magnetic materials; phase equilibrium; shape memory alloys
Ovidius University of Constanta, Faculty of Mechanical, Industrial and Maritime Engineering, 124 Mamaia Ave, 900527 Constanta, Romania
Interests: materials science and engineering; material characterisation; titanium alloys; bio-nano-materials for hard tissue implants; biodegradable alloys; thermo-mechanical processing of metallic materials
Interests: materials science and engineering; material characterisation; titanium alloys; bio-nano-materials for hard tissue implants; biodegradable alloys; thermo-mechanical processing of metallic materials
Department of Manufacturing Engineering, Faculty of Technological Engineering and Industrial Management, Transilvania University of Brasov, B-dul Eroilor 29, 500036 Brasov, Romania
Interests: CAD/CAE/CAPP/CAM systems; reverse engineering; additive manufacturing; innovative manufacturing technologies
Interests: CAD/CAE/CAPP/CAM systems; reverse engineering; additive manufacturing; innovative manufacturing technologies
Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan
Interests: additive manufacturing; solidification; thin films and nanotechnology; structure of amorphous materials; atomic diffusion; digital twin
Interests: additive manufacturing; solidification; thin films and nanotechnology; structure of amorphous materials; atomic diffusion; digital twin
Leibniz Institute for Materials Engineering—IWT Bremen, University of Bremen, Badgasteiner Street 3, 28359 Bremen, Germany
Interests: liquid metal dealloying; additive manufacturing; surface functionalization; nanoporous materials; metal-polymer composites; biomedical materials; high-entropy alloys; metallic glasses; metal matrix composites; bicontinuous materials; permanent magnets; titanium alloys; mechanical behavior and deformation mechanism
Interests: liquid metal dealloying; additive manufacturing; surface functionalization; nanoporous materials; metal-polymer composites; biomedical materials; high-entropy alloys; metallic glasses; metal matrix composites; bicontinuous materials; permanent magnets; titanium alloys; mechanical behavior and deformation mechanism
Department of High-Efficiency Processing Technologies, Moscow State University of Technology «STANKIN», Vadkovsky per. 1, 127055 Moscow, Russia
Interests: materials science; monitoring; additive manufacturing; Selective Laser Melting; electrical discharge machining; vibroacoustic diagnostics
Interests: materials science; monitoring; additive manufacturing; Selective Laser Melting; electrical discharge machining; vibroacoustic diagnostics
Department of Mechanical and Industrial, Universidade Nova de Lisboa, Lisbon, Portugal
Interests: welding; additive manufacturing; laser welding; arc welding; shape memory alloys; High Entropy Alloys; titanium alloys; synchrotron x-ray radiation; advanced characterization; Mechanical Behavior of Materials; thermodynamic simulations
Interests: welding; additive manufacturing; laser welding; arc welding; shape memory alloys; High Entropy Alloys; titanium alloys; synchrotron x-ray radiation; advanced characterization; Mechanical Behavior of Materials; thermodynamic simulations
Department of Manufacturing Systems Engineering, Luleå University of Technology, SE-971 87 Luleå, Sweden
Interests: laser micromachining; signal processing
Interests: laser micromachining; signal processing
1. Department of Materials Science and Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary
2. MTA-BME Lendület Composite Metal Foams Research Group, Műegyetem rkp. 3., H-1111 Budapest, Hungary
Interests: fatigue; metal matrix composites; fracture mechanics; mechanical testing; metallic foams
2. MTA-BME Lendület Composite Metal Foams Research Group, Műegyetem rkp. 3., H-1111 Budapest, Hungary
Interests: fatigue; metal matrix composites; fracture mechanics; mechanical testing; metallic foams
Centre for Sustainable Materials Research and Technology (SMaRT Centre), School of Materials Science and Engineering, University of New South Wales (UNSW Sydney), NSW 2052, Australia
Interests: metallic materials at high temperatures
Interests: metallic materials at high temperatures
Mechanical Engineering Faculty, Department of Machine Design & Tribology, Technical University "Gh. Asachi" of IASI, 61-63 D. Mangeron Blvd., 700050, IASI, Romania
Interests: Tribology; friction; wear; machine parts; signal processing; Data Acquisition; automotive; mechanical transmissions; mechanical engineering; Lubrication; lubricants; coatings; materials; rolling bearings; diagnosis
Interests: Tribology; friction; wear; machine parts; signal processing; Data Acquisition; automotive; mechanical transmissions; mechanical engineering; Lubrication; lubricants; coatings; materials; rolling bearings; diagnosis
Military University of Technology, Department of Mechanics and Special Purpose Systems
gen. Sylwestra Kaliskiego 2 Street
00 – 908 Warsaw 46
Interests: numerical analysis; finite element method (FEM); dynamic behaviour; high rate metal deformations; high strain-rate; impact; split hopkinson pressure bar technique
Interests: numerical analysis; finite element method (FEM); dynamic behaviour; high rate metal deformations; high strain-rate; impact; split hopkinson pressure bar technique
Section of Metallurgy and Materials Technology, School of Mining and Metallurgical Engineering, National Technical University of Athens (NTUA), 9 Iroon Polytechniou Str., GR-157 80 Zografou Campus, Athens, Greece
Interests: copper; metals; aluminium; steel; heat treatment; forming; rolling; microstructure-property relationships; ultra fast annealing
Interests: copper; metals; aluminium; steel; heat treatment; forming; rolling; microstructure-property relationships; ultra fast annealing
Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 16607 Prague 6, Czech Republic
Interests: fatigue analysis; fatigue prediction; multiaxial fatigue; fatigue in notches
Interests: fatigue analysis; fatigue prediction; multiaxial fatigue; fatigue in notches
Korea Institute of Industrial Technology, Cheonan, Korea
Interests: metallic materials; titanium; powder; corrosion; electrochemistry
Interests: metallic materials; titanium; powder; corrosion; electrochemistry
Department of Computer Modelling and Metal Forming Technologies, Faculty of Mechanical Engineering, Lublin University of Technology, Lublin, Poland
Interests: numerical modelling; virtual prototyping and optimization of forming processes and design of innovative machines used in metal forming
Interests: numerical modelling; virtual prototyping and optimization of forming processes and design of innovative machines used in metal forming
Military University of Technology,
Kaliskiego 2, 00-908, Warsaw Poland,
Interests: additive manufacturing; reverse engineering; dynamic behaviour of materials; material characterisation; fe analysis; numerical investigations; 3D printing; fused filament fabrication; selective laser melting; selective laser sintering; fused deposition
Interests: additive manufacturing; reverse engineering; dynamic behaviour of materials; material characterisation; fe analysis; numerical investigations; 3D printing; fused filament fabrication; selective laser melting; selective laser sintering; fused deposition
School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou 213164, China
Interests: flat metal specimen with inclined notch; stress triaxiality; lode angle parameter
Interests: flat metal specimen with inclined notch; stress triaxiality; lode angle parameter
Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084, Fisciano, SA, Italy
Interests: concrete technology; structural analysis; sustainable construction materials; fiber-reinforced concrete; textile-reinforced mortar; high-performance cementitious composites
Interests: concrete technology; structural analysis; sustainable construction materials; fiber-reinforced concrete; textile-reinforced mortar; high-performance cementitious composites
Faculty of Health Sciences, Universidad Católica San Antonio de Murcia, 30107 Murcia, Spain
Interests: crestal bone loss; bone-to-implant contact; new implant design; dental implants; osseointegration; dental materials; dental surgery; 3D dental; dental biomaterials; dental prosthetic; sinus lift; wisdom tooth
Interests: crestal bone loss; bone-to-implant contact; new implant design; dental implants; osseointegration; dental materials; dental surgery; 3D dental; dental biomaterials; dental prosthetic; sinus lift; wisdom tooth
ABB US Research Center, 1021 Main Campus Drive, Raleigh, NC 27606, USA
Interests: magnetic materials; magnets; magnetic hyperthermia; small angle neutron scattering
Interests: magnetic materials; magnets; magnetic hyperthermia; small angle neutron scattering
“George Emil Palade” University of Medicine, Pharmacy, Science and Technology of Târgu Mureș, Department of Industrial Engineering and Management, Faculty of Engineering and Information Technology, Targu Mures, Romania
Interests: development and characterization of metallic alloys for different applications; coatings on metallic substrates; synthesis and characterization of materials for advanced electromagnetic applications; study of piezoelectric ceramics
Interests: development and characterization of metallic alloys for different applications; coatings on metallic substrates; synthesis and characterization of materials for advanced electromagnetic applications; study of piezoelectric ceramics
Slovak University of Technology in Bratislava
Vazovova 5, 812 43 Bratislava
Ulica Jána Bottu 2781/25
Trnava 917 24
Slovakia
Interests: CAD; CAM; 5-axis machining; machining; HSC and HSM
Interests: CAD; CAM; 5-axis machining; machining; HSC and HSM
Faculty of Natural Sciences and Engineering, University of Ljubljana, 1000 Ljubljana, Slovenia
Interests: casting; solidification; thermal analysis; control methods
Interests: casting; solidification; thermal analysis; control methods
