Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Science and Engineering of Oxide Materials and Nanomaterials Department, Faculty of Chemical Engineering and Biotechnology, National University of Science and Technology Politehnica Bucharest, 1-7 Gh. Polizu Street, Sector 1, RO-011061 Bucharest, Romania
Interests: glass; glassceramics; wastes; composite materials
Interests: glass; glassceramics; wastes; composite materials
Mechanical Engineering, Texas Tech University, Lubbock, TX 79409, USA
Interests: biomaterials; polymers; scaffolds; tissue engineering; design; optimization; muscle; food; mechanics; additive manufacturing; 3D printing; finite element analysis; lattices; architected structures
Interests: biomaterials; polymers; scaffolds; tissue engineering; design; optimization; muscle; food; mechanics; additive manufacturing; 3D printing; finite element analysis; lattices; architected structures
Faculty of Engineering and Mathematics, Bielefeld University of Applied Sciences, 33619 Bielefeld, Germany
Interests: magnetism; 3D printing; textile technologies; polymer
Interests: magnetism; 3D printing; textile technologies; polymer
Department of Silicate Technology, Faculty of Chemical Technology, Kaunas University of Technology, Kaunas, Lithuania
Interests: hydrothermal synthesis; hydration properties and products; cement; synthetic additive and application in cement chemistry and etc.; calcium silicate hydrates; calcium aluminate hydrate; microcalorimetry analysis; thermal stability; heavy metals ions - adsorption properties and immobilization in cement stone; XRD, STA, BET, FT-IR analysis
Interests: hydrothermal synthesis; hydration properties and products; cement; synthetic additive and application in cement chemistry and etc.; calcium silicate hydrates; calcium aluminate hydrate; microcalorimetry analysis; thermal stability; heavy metals ions - adsorption properties and immobilization in cement stone; XRD, STA, BET, FT-IR analysis
Laboratory of Engineering Science for energy (labSIPE) ENSA, ChouaibDoukkaliUniversity, El-Jadida, Morocco.
Interests: wastewater reuse; desalination; infiltration/percolation; coagulation; disinfection; dielectric properties; impedance spectroscopy; mechanical properties; thermal insulation; energy-efficient materials
Interests: wastewater reuse; desalination; infiltration/percolation; coagulation; disinfection; dielectric properties; impedance spectroscopy; mechanical properties; thermal insulation; energy-efficient materials
Particles and Process Engineering, University of Bremen, Mechanical Process Engineering, Bremen, Germany
Interests: melt atomization; droplet generation; additive manufacturing; materials design; high throughput; spray forming; rapid solidification
Interests: melt atomization; droplet generation; additive manufacturing; materials design; high throughput; spray forming; rapid solidification
Department of Physics, Faculty of Sciences and Technology, University of Coimbra, 3004-531 Coimbra, Portugal
Interests: mechanics of materials; materials design; fabrication; optimum design; modeling; renewable energy; sustainable mobility; thermodynamics; energy conversion; quantum energy & condensed matter; materials physics; transport properties; composites; tribology; micro/nano-machines
Interests: mechanics of materials; materials design; fabrication; optimum design; modeling; renewable energy; sustainable mobility; thermodynamics; energy conversion; quantum energy & condensed matter; materials physics; transport properties; composites; tribology; micro/nano-machines
Faculty of Chemical Engineering and Biotechnologies, Department of Science and Engineering of Oxide Materials and Nanomaterials, University Politehnica of Bucharest, Bucharest, Romania
Interests: thin films; interfaces; sputtering; nanomaterials; thin films deposition methods; biomaterials; 3D printed scaffolds; advanced ceramics; characterization methods (X-ray diffraction and electron microscopy)
Interests: thin films; interfaces; sputtering; nanomaterials; thin films deposition methods; biomaterials; 3D printed scaffolds; advanced ceramics; characterization methods (X-ray diffraction and electron microscopy)
Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Ulitsa Karla Marksa, 12, Ufa, Republic of Bashkortostan 450077, Russia
Interests: severe plastic deformation; nanostructured and ultrafine-grained materials; X-ray analysis; crystallographic texture; multi-scale simulation; deformation mechanisms; strengthening; segregations; Grain Boundaries; radiation resistance; steels; Al alloys
Interests: severe plastic deformation; nanostructured and ultrafine-grained materials; X-ray analysis; crystallographic texture; multi-scale simulation; deformation mechanisms; strengthening; segregations; Grain Boundaries; radiation resistance; steels; Al alloys
Department of Material Engineering, Institute of Environmental Engineering, Faculty of Civil Engineering, Technical University of Kosice, Vysokoskolska 4, Kosice 042 00, Slovakia
Interests: durability; life cycle assessment (lca); biocorrosion; cement composites; environmental properties (leachability of metals, and radioactivity)
Interests: durability; life cycle assessment (lca); biocorrosion; cement composites; environmental properties (leachability of metals, and radioactivity)
Department of Civil & Environmental Engineering, University of Alaska Fairbanks, Fairbanks, AK, USA
Interests: rheology; modeling and simulation; recycling; mechanics of materials; statistics; fracture mechanics; mathematical modelling; construction materials; plasticity; microstructure; finite element analysis; waste materials; failure analysis; pavement engineering; chemo-mechanical analysis
Interests: rheology; modeling and simulation; recycling; mechanics of materials; statistics; fracture mechanics; mathematical modelling; construction materials; plasticity; microstructure; finite element analysis; waste materials; failure analysis; pavement engineering; chemo-mechanical analysis
School of Agricultural Sciences of Lavras, Federal University of Lavras – UFLA, Perimetral Av., POB 3037, 37200-900, Lavras, MG, Brazil.
Interests: natural fibers; fiber-reinforced composites; mechanical properties; chemical composition; lignocellulosic fiber; biocomposites; reconstituted wood; agricultural wastes; thermal conductivity; physical and mechanical properties; bond line quality; adhesive
Interests: natural fibers; fiber-reinforced composites; mechanical properties; chemical composition; lignocellulosic fiber; biocomposites; reconstituted wood; agricultural wastes; thermal conductivity; physical and mechanical properties; bond line quality; adhesive
School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510006, China
Interests: low-carbon construction materials (such as recycled aggregate concrete; geopolymer concrete; rubberized concrete); highly durable and high-performance concrete
Interests: low-carbon construction materials (such as recycled aggregate concrete; geopolymer concrete; rubberized concrete); highly durable and high-performance concrete
Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia
Interests: carbon fibers; fiberglass; natural fibers; physical properties of fibers
Interests: carbon fibers; fiberglass; natural fibers; physical properties of fibers
CQ-VR Centre of Chemistry-Vila Real, Department of Physics, University of Trás-os-Montes and Alto Douro, 5000-801 Vila Real, Portugal
Interests: functional materials; optical metrology; thin film deposition; fluorescent dye; photodynamic therapy
Interests: functional materials; optical metrology; thin film deposition; fluorescent dye; photodynamic therapy
Department of Civil, Chemical, Environmental, and Materials Engineering (DICAM), University of Bologna, Viale del Risorgimento 2, 40136 Bologna, Italy
Interests: structural mechanics; mechanical behavior at multiple length scales; materials characterization; non-destructive testing; concrete structures; use of waste materials in concrete; fiber-reinforced structures; masonry strengthening; computational mechanics; contact mechanics; damage and fracture initiation; crack propagation modeling; additive manufacturing of concrete and earth structures
Interests: structural mechanics; mechanical behavior at multiple length scales; materials characterization; non-destructive testing; concrete structures; use of waste materials in concrete; fiber-reinforced structures; masonry strengthening; computational mechanics; contact mechanics; damage and fracture initiation; crack propagation modeling; additive manufacturing of concrete and earth structures
Vasco da Gama CoLAB—Armazenamento de Energia, 4200-374 Porto, Portugal
Interests: sensors; electrocatalysis; corrosion; electrochemistry; semiconductors; concrete structures; hybrid sol-gel materials; alkalis-silica reaction
Interests: sensors; electrocatalysis; corrosion; electrochemistry; semiconductors; concrete structures; hybrid sol-gel materials; alkalis-silica reaction
Department of Chemical Sciences, Università degli Studi di Catania, Via A. Doria 6, 95125 Catania, Italy
Interests: heterogeneous catalysis; photocatalysis; CO2 valorization; semiconductor photocatalysts; VOCs removal; h2 production and purification; co-prox reaction
Interests: heterogeneous catalysis; photocatalysis; CO2 valorization; semiconductor photocatalysts; VOCs removal; h2 production and purification; co-prox reaction
Department of Transport Infrastructure and Water Resources Engineering, Széchenyi István University, Győr, Hungary
Interests: geotechnical engineering; geometry; transportation; higher education; transportation planning; car; Civil Engineering; economic analysis; economics analysis; geotechnics
Interests: geotechnical engineering; geometry; transportation; higher education; transportation planning; car; Civil Engineering; economic analysis; economics analysis; geotechnics
Advanced Materials Processing and Analysis Center, University of Central Florida, Orlando, FL, USA
Interests: biomaterials; tissue engineering; stem cells; tumor microenvironment; regenerative medicine; cell-material interaction
Interests: biomaterials; tissue engineering; stem cells; tumor microenvironment; regenerative medicine; cell-material interaction
SECIHTI, División de Estudios de Posgrado e Investigación, Instituto Tecnológico de Orizaba, Orizaba, Mexico
Interests: ferroelectrics; piezoelectrics; pyroelectrics; photoacoustics; bionics; sensors
Interests: ferroelectrics; piezoelectrics; pyroelectrics; photoacoustics; bionics; sensors
Dipartimento di Culture del Progetto (DCP)-Department of Architecture and Arts, Università Iuav di Venezia, Dorsodure, 2206 Venice, Italy
Interests: seismic engineering; structural engineering
Interests: seismic engineering; structural engineering
Faculty of Chemistry, Department of Polymer Technology, Gdańsk University of Technology, Gabriela Narutowicza 11/12, 80–233 Gdańsk, Poland
Interests: plastics and rubber recycling; reactive processing; composites; polymer blends and composites compatibilization; bitumen modification
Interests: plastics and rubber recycling; reactive processing; composites; polymer blends and composites compatibilization; bitumen modification
Laboratory for Manufacturing Systems and Automation, Department of Mechanical Engineering and Aeronautics, University of Patras, Patras, Greece
Interests: additive manufacturing; computational methods; manufacturing process simulations; numerical modeling; empirical modeling
Interests: additive manufacturing; computational methods; manufacturing process simulations; numerical modeling; empirical modeling
CIC Energigune, Vitoria-Gasteiz, Alava, Spain
Interests: materials for energy applications; mfc; SOFC; MCFC; SHTES; LHTES; modeling; simulations; carbon-based materials; ceramics; membranes
Interests: materials for energy applications; mfc; SOFC; MCFC; SHTES; LHTES; modeling; simulations; carbon-based materials; ceramics; membranes
Division of Welding Engineering, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, G. Narutowicza 11/12, 80-233 Gdańsk, Poland
Interests: underwater welding; fusion welding; solid state welding; brazing; thermal spraying; hydrogen embrittlement; cold cracking; high strength steel; stainless steel; coatings
Interests: underwater welding; fusion welding; solid state welding; brazing; thermal spraying; hydrogen embrittlement; cold cracking; high strength steel; stainless steel; coatings
Fraunhofer USA, Center for Molecular Biotechnology, Newark, DE 19711, USA
Interests: vaccines; nanotechnology; adjuvants; thermostability; microneedles; novel drug delivery systems
Interests: vaccines; nanotechnology; adjuvants; thermostability; microneedles; novel drug delivery systems
Faculty of Mechatronics and Mechanical Engineering, Kielce University of Technology, Aleja Tysiaclecia Panstwa Polskiego 7, 25-314 Kielce, Poland
Interests: fracture mechanics; machine design; fatigue; finite element method
Interests: fracture mechanics; machine design; fatigue; finite element method
Department of Materials Science and Engineering, Uppsala University, 751 05 Uppsala, Sweden
Interests: polymer chemistry; polymer composites; natural polymers; lignin; biomass
Interests: polymer chemistry; polymer composites; natural polymers; lignin; biomass
Department of Applied Physics, Building Engineering School, University of Granada, 18072 Granada, Spain
Interests: acoustic emission; composites; non destructive testing; wood; vibrations; poplar; elastic waves; engineered wood products
Interests: acoustic emission; composites; non destructive testing; wood; vibrations; poplar; elastic waves; engineered wood products
