Oxazoline-Based Hydro-, Amphi- and Lipogels from Microwave-Assisted Synthesis

F. WIESBROCK; A. HECKE; B. WIRNSBERGER; A. M. KELLY; F. STELZER

doi:10.3797/scipharm.cespt.8.PMS33

You are currently viewing a new version of our website. To view the old version click .

Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2016). Previous articles were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence, and they are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).

Conference Report

12 July 2010

Oxazoline-Based Hydro-, Amphi- and Lipogels from Microwave-Assisted Synthesis

and

Graz University of Technology, Institute for Chemistry and Technology of Materials, Stremayrgasse 16, AT-8010 Graz, Austria

Polymer Competence Center Leoben GmbH (PCCL), Roseggerstrasse 12, AT-8700 Leoben, Austria

Author to whom correspondence should be addressed.

Sci. Pharm.2010, 78(3), 660;https://doi.org/10.3797/scipharm.cespt.8.PMS33

Version Notes

Order Reprints

Abstract

The group of poly(2-oxazoline)s has scarcely been considered as scaffold for hydrogels [1, 2], despite of the FDA approval for two prominent congeners, namely poly(2-ethyl-2-oxazoline) and poly(2-phenyl-2-oxazoline) (21 CFR 175.105). [...]

Article Metrics

Citations

Article Access Statistics

Journal Statistics

Multiple requests from the same IP address are counted as one view.

Examination of High Pressure Micro Systems by μPIV and CFD Simulations Regarding Abrasion, Particle Deposition and Stress Fields

Experimental Study of Filter Cake Cracking During Deliquoring