We, the authors, wish to make the following corrections to our paper [1]. We found that the scales of the x-axis and y-axis of Figure 4 and Figure 7 on pages 8 and 9 were made incorrectly.
Figure 4.
Signal after removing Noise from Figure 3. (a) Proposed method; (b) existing method.
Figure 7.
Signal after removing Noise from Figure 6. (a) Proposed method; (b) existing method (FsLMS).
In page number 8, “The step size or learning rate used for FsLMS is μ = 0.1 and, for FsLMS, μ is 0.000097.” should be read as “The step size or learning rate used for FsLMS is μ = 0.1, and, for MFsLMS, μ = 0.000097.”
The following will be the actual Figure 4.
The following will be the actual Figure 7.
The authors would like to apologize for any inconvenience caused. The change does not affect the scientific results. The manuscript will be updated and the original will remain online on the article webpage.
Reference
- Walia, R.; Ghosh, S. Active Noise Control Using Modified FsLMS and Hybrid PSOFF Algorithm. Appl. Sci. 2018, 8, 686. [Google Scholar] [CrossRef]
© 2018 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).