In the original publication [1], there was a mistake in Figure 2. The figure was uploaded as a duplicate of Figure 6. The corrected Figure 2 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Figure 2.
The XRD pattern of the initial material of (a) pure-Mg. XRD patterns of the initial materials of (b) Mg-10Al, Mg-20Al, and Mg-30Al alloys. XRD patterns of the initial materials of (c) Mg-10Zn, Mg-20Zn, and Mg-30Zn alloys.
Reference
- Ran, J.; Zeng, Z.; Wang, Z.; Zhang, S.; Ma, L.; Heng, Z. Effect of Low-Melting-Point Alloys on High-Temperature Hydrolysis Hydrogen Production of Mg-Based Metals. Appl. Sci. 2025, 15, 4437. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).