Al-Zuhairi, A.;                     Lehner, P.;                     Blinn, B.;                     Smaga, M.;                     Flatter, J.;                     Beck, T.;                     Teutsch, R.    
        Influence of Shot Peening on Selected Properties of the Surface and Subsurface Regions of Additively Manufactured 316L and AlSi10Mg. Metals 2025, 15, 856.
    https://doi.org/10.3390/met15080856
    AMA Style
    
                                Al-Zuhairi A,                                 Lehner P,                                 Blinn B,                                 Smaga M,                                 Flatter J,                                 Beck T,                                 Teutsch R.        
                Influence of Shot Peening on Selected Properties of the Surface and Subsurface Regions of Additively Manufactured 316L and AlSi10Mg. Metals. 2025; 15(8):856.
        https://doi.org/10.3390/met15080856
    
    Chicago/Turabian Style
    
                                Al-Zuhairi, Ali,                                 Patrick Lehner,                                 Bastian Blinn,                                 Marek Smaga,                                 Jonas Flatter,                                 Tilmann Beck,                                 and Roman Teutsch.        
                2025. "Influence of Shot Peening on Selected Properties of the Surface and Subsurface Regions of Additively Manufactured 316L and AlSi10Mg" Metals 15, no. 8: 856.
        https://doi.org/10.3390/met15080856
    
    APA Style
    
                                Al-Zuhairi, A.,                                 Lehner, P.,                                 Blinn, B.,                                 Smaga, M.,                                 Flatter, J.,                                 Beck, T.,                                 & Teutsch, R.        
        
        (2025). Influence of Shot Peening on Selected Properties of the Surface and Subsurface Regions of Additively Manufactured 316L and AlSi10Mg. Metals, 15(8), 856.
        https://doi.org/10.3390/met15080856