In the published article [1], the authors realized some errors concerning the spelling of a product and company name in the Section 2, and thus wish to make the following corrections to this paper:
- In line 6–7, page 3/8, this sentence should be revised to “…The latter is applied as a sealant in ball valves and fittings, as well as an inner lining of the sampling hose (Tufluor PTFE Chem, 32 mm inner diameter, Tudertechnica, Saccolongo, Italy) …”.
The authors would like to apologize for any inconvenience caused to the readers by the change. The change does not affect the scientific results. The manuscript will be updated and the original will remain online on the article webpage, with a reference to this Correction.
Reference
- Lenz, R.; Labrenz, M. Small Microplastic Sampling in Water: Development of an Encapsulated Filtration Device. Water 2018, 10, 1055. [Google Scholar] [CrossRef]
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).