The journal retracts the article, “An accessible pre-design calculation tool to support the definition of EV components” [1], cited above, due to redundant publication with “Accessible pre-design calculation tool to support the definition of EV components” by Roche, M., et al. [2] in the International Journal of Automotive Technology, where the authors submitted their work in 2016 after submitting to 28th International Electric Vehicle Symposium Exhibition (EVS28) as a conference paper in 2015.
The article is retracted from the World Electric Vehicle Journal and can henceforth be found under reference [2].
This retraction was approved by the Editor in Chief of the journal. The authors agreed to this retraction.
References
- Roche, M.; Sabrià, D.; Mammetti, M. RETRACTED: An accessible pre-design calculation tool to support the definition of EV components. World Electr. Veh. J. 2015, 7, 101–113. [Google Scholar] [CrossRef]
- Roche, M.; Sabrià, D.; Mammetti, M. Accessible pre-design calculation tool to support the definition of EV components. Int. J. Automot. Technol. 2016, 17, 509–521. [Google Scholar]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).