Obtaining and Characterization of New Materials
Funding
Data Availability Statement
Acknowledgments
Conflicts of Interest
References
- Sandu, A.; Vasilache, V.; Sandu, I.; Sieliechi, J.; Kouame, I.; Matasaru, P.; Sandu, I. Characterization of the Acid-Base Character of Burned Clay Ceramics Used for Water Decontamination. Materials 2019, 12, 3836. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Nergis, D.B.; Abdullah, M.; Sandu, A.; Vizureanu, P. XRD and TG-DTA Study of New Alkali Activated Materials Based on Fly Ash with Sand and Glass Powder. Materials 2020, 13, 343. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Azimi, E.; Abdullah, M.; Vizureanu, P.; Salleh, M.; Sandu, A.; Chaiprapa, J.; Yoriya, S.; Hussin, K.; Aziz, I. Strength Development and Elemental Distribution of Dolomite/Fly Ash Geopolymer Composite under Elevated Temperature. Materials 2020, 13, 1015. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Hegyi, A.; Lăzărescu, A.; Szilagyi, H.; Grebenişan, E.; Goia, J.; Mircea, A. Influence of TiO2 Nanoparticles on the Resistance of Cementitious Composite Materials to the Action of Bacteria. Materials 2021, 14, 1074. [Google Scholar] [CrossRef] [PubMed]
- Borlea (Mureşan), S.; Tiuc, A.; Nemeş, O.; Vermeşan, H.; Vasile, O. Innovative Use of Sheep Wool for Obtaining Materials with Improved Sound-Absorbing Properties. Materials 2020, 13, 694. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Rogale, D.; Majstorović, G.; Rogale, S.F. Comparative Analysis of the Thermal Insulation of Multi-Layer Thermal Inserts in a Protective Jacket. Materials 2020, 13, 2672. [Google Scholar] [CrossRef] [PubMed]
- Nica, M.; Cretu, B.; Ene, D.; Antoniac, I.; Gheorghita, D.; Ene, R. Failure Analysis of Retrieved Osteosynthesis Implants. Materials 2020, 13, 1201. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Istrate, B.; Munteanu, C.; Lupescu, S.; Chelariu, R.; Vlad, M.; Vizureanu, P. Electrochemical Analysis and In Vitro Assay of Mg-0.5Ca-xY Biodegradable Alloys. Materials 2020, 13, 3082. [Google Scholar] [CrossRef] [PubMed]
- Duceac, L.; Calin, G.; Eva, L.; Marcu, C.; Bogdan Goroftei, E.; Dabija, M.; Mitrea, G.; Luca, A.; Hanganu, E.; Gutu, C.; et al. Third-Generation Cephalosporin-Loaded Chitosan Used to Limit Microorganisms Resistance. Materials 2020, 13, 4792. [Google Scholar] [CrossRef] [PubMed]
- Seifert, M. High Temperature Behavior of RuAl Thin Films on Piezoelectric CTGS and LGS Substrates. Materials 2020, 13, 1605. [Google Scholar] [CrossRef] [PubMed] [Green Version]
- Seifert, M.; Lattner, E.; Menzel, S.; Oswald, S.; Gemming, T. Phase Formation and High-Temperature Stability of Very Thin Co-Sputtered Ti-Al and Multilayered Ti/Al Films on Thermally Oxidized Si Substrates. Materials 2020, 13, 2039. [Google Scholar] [CrossRef] [PubMed]
- Skowronski, L.; Ciesielski, A.; Olszewska, A.; Szczesny, R.; Naparty, M.; Trzcinski, M.; Bukaluk, A. Microstructure and Optical Properties of E-Beam Evaporated Zinc Oxide Films—Effects of Decomposition and Surface Desorption. Materials 2020, 13, 3510. [Google Scholar] [CrossRef] [PubMed]
- Hashim, A.; Salleh, M.; Sandu, A.; Ramli, M.; Yee, K.; Mohd Mokhtar, N.; Chaiprapa, J. Effect of Ni on the Suppression of Sn Whisker Formation in Sn-0.7Cu Solder Joint. Materials 2021, 14, 738. [Google Scholar] [CrossRef] [PubMed]
- Zaimi, N.; Salleh, M.; Sandu, A.; Abdullah, M.; Saud, N.; Rahim, S.; Vizureanu, P.; Said, R.; Ramli, M. Performance of Sn-3.0Ag-0.5Cu Composite Solder with Kaolin Geopolymer Ceramic Reinforcement on Microstructure and Mechanical Properties under Isothermal Ageing. Materials 2021, 14, 776. [Google Scholar] [CrossRef] [PubMed]
- Țîțu, A.; Vizureanu, P.; Țîțu, Ș.; Sandu, A.; Pop, A.; Bucur, V.; Ceocea, C.; Boroiu, A. Experimental Research on the Cutting of Metal Materials by Electrical Discharge Machining with Contact Breaking with Metal Band as Transfer Object. Materials 2020, 13, 5257. [Google Scholar] [CrossRef] [PubMed]
- Haulică, M.; Florescu, O.; Vasilache, V.; Sandu, I. The Comparative Study of the State of Conservation of Two Medieval Documents on Parchment from Different Historical Periods. Materials 2020, 13, 4766. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Sandu, A.V. Obtaining and Characterization of New Materials. Materials 2021, 14, 6606. https://doi.org/10.3390/ma14216606
Sandu AV. Obtaining and Characterization of New Materials. Materials. 2021; 14(21):6606. https://doi.org/10.3390/ma14216606
Chicago/Turabian StyleSandu, Andrei Victor. 2021. "Obtaining and Characterization of New Materials" Materials 14, no. 21: 6606. https://doi.org/10.3390/ma14216606
APA StyleSandu, A. V. (2021). Obtaining and Characterization of New Materials. Materials, 14(21), 6606. https://doi.org/10.3390/ma14216606