Erratum: Chen, Z. and Etsion, I. Recent Development in Modeling of Coated Spherical Contact. Materials 2020, 13, 460

Zhou Chen; Izhak Etsion

doi:10.3390/ma13153362

and

Department of Mechanical Engineering, Technion-Israel Institute of Technology, 32000 Haifa, Israel

^*

Author to whom correspondence should be addressed.

Materials2020, 13(15), 3362;https://doi.org/10.3390/ma13153362

This article belongs to the Special Issue Tribology: Friction and Wear of Engineering Materials

Version Notes

Order Reprints

The authors wish to make the following corrections to this paper [1]:

References

45.: Zhang, H.; Chen, Z.; Etsion, I. Model for the static friction coefficient of spherical contact with soft coating. Tribol. Lett. under review.
70.: Parel, K.; Chen, Z.; Etsion, I. Strengthening and weakening effects in bilayer coated spherical contact. Front. Mech. Eng. under review.

to the correct version, as follows:

45.: Zhang, H.; Chen, Z.; Etsion, I. Model for the static friction coefficient of spherical contact with soft coating. SN Appl. Sci. 2020, 2, 1197, doi:10.1007/s42452-020-2995-6.
70.: Parel, K.; Chen, Z.; Etsion, I. Strengthening and weakening effects in bilayer coated spherical contact. Front. Mech. Eng. 2020, 6, 23, doi:10.3389/fmech.2020.00023.

The authors would like to apologize for any inconvenience caused to the readers by these changes.

Reference

Chen, Z.; Etsion, I. Recent Development in Modeling of Coated Spherical Contact. Materials 2020, 13, 460. [Google Scholar]

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Erratum: Chen, Z. and Etsion, I. Recent Development in Modeling of Coated Spherical Contact. Materials 2020, 13, 460

Reference

Article Metrics

Citations

Article Access Statistics