Next Article in Journal
The Effect of Time Synchronization Error in LAN-Based Digital Substation
Previous Article in Journal
A Cross-Chain Solution to Integrating Multiple Blockchains for IoT Data Management
Previous Article in Special Issue
Biocompatible Cantilevers for Mechanical Characterization of Zebrafish Embryos using Image Analysis
Open AccessEditorial

Cantilever Sensors

1
Institute of Semiconductor Technology (IHT), Technische Universität Braunschweig, Hans-Sommer-Straße 66, D-38106 Braunschweig, Germany
2
Laboratory for Emerging Nanometrology (LENA), Technische Universität Braunschweig, Langer Kamp 6a/b, D-38106 Braunschweig, Germany
*
Author to whom correspondence should be addressed.
Sensors 2019, 19(9), 2043; https://doi.org/10.3390/s19092043
Received: 16 April 2019 / Accepted: 30 April 2019 / Published: 1 May 2019
(This article belongs to the Special Issue Cantilever Sensor)
  |  
PDF [164 KB, uploaded 1 May 2019]
Note: In lieu of an abstract, this is an excerpt from the first page.

Excerpt

A cantilever is considered the most basic mechanical spring-mass system and has enormous application potential for sensors [...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Peiner, E.; Wasisto, H.S. Cantilever Sensors. Sensors 2019, 19, 2043.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Sensors EISSN 1424-8220 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top