Search Results (41,436)

This work investigates the physicochemical characteristics of waste tire pyrolysis char (WTP-char) produced at 500 °C in an industrial-scale auger reactor. The study uniquely combines material profiling with environmental safety assessment, specifically targeting organic contaminants and polymer stabilizers, evaluating WTP-char’s potential for circular economy applications. The samples underwent comprehensive analysis, including GC-MS, TGA, SEM-EDS, TXRF, and BET surface area measurements. The results revealed a high volatile matter content (13 wt.%), attributed to the thermal inertia typical of industrial-scale units. The organic fraction was dominated by n-alkanes (48.3%) and a significant concentration (6.97%) of the stabilizer Tris(2,4-di-tert-butylphenyl) phosphate (bDtBPP), posing potential environmental risks due to its cytotoxicity. Polycyclic aromatic hydrocarbon (PAH) analysis showed a prevalence of high-molecular-weight (HMW) compounds (79.7%), indicating high chemical stability. Although the specific surface area was low (28.9 m²/g), suggesting the need for activation, the material exhibits potential as a low-cost semi-reinforcing filler or solid fuel. By moving beyond laboratory-scale experiments to real industrial production, this study establishes a practical framework for evaluating both the performance and environmental safety of waste tire pyrolysis char. Full article

In this work, a flexible and sustainable radar-absorbing material (RAM) based on porous carbon derived from raw Kraft black liquor was developed. The porous carbon filler was synthesized through a simple, eco-friendly one-pot polymerization route, thereby avoiding lignin extraction, purification, and chemical activation steps. Macroporosity was introduced by using poly(methyl methacrylate) microspheres as a hard template, yielding a lightweight carbon material with a foam-like morphology, low density, and high porosity. The carbon filler was incorporated into a silicone rubber matrix at different loadings (5–25 wt.%) to produce flexible composites. The structural, morphological, and textural properties of porous carbon were investigated by SEM, EDX, Raman spectroscopy, nitrogen adsorption, and mercury porosimetry. The electromagnetic properties of composites were measured in the X-band (8.2–12.4 GHz) using a vector network analyzer. The mechanical behavior was evaluated through Young’s modulus. The results show that increasing filler content enhances dielectric losses and attenuation capability. Among all composites, the sample containing 20 wt.% of porous carbon exhibited the best electromagnetic performance, achieving a reflection loss of −42.3 dB at 10.97 GHz with a thickness of 2.43 mm, corresponding to an absorption efficiency of 99.99%. This performance is attributed to a favorable combination of impedance matching and quarter-wavelength cancellation effects. The developed sustainable, lightweight, and flexible composites demonstrate potential as low-cost RAM for aerospace and electromagnetic interference mitigation applications. Full article

Objectives: Multidrug-resistant (MDR) Pseudomonas aeruginosa represents a major clinical challenge, driven in part by resistance–nodulation–division (RND) efflux pumps that reduce intracellular antibiotic concentrations and limit the efficacy of many antibacterial agents, including fluoroquinolones. The aim of this study was to identify and characterize TXA11114 as a small-molecule efflux pump inhibitor (EPI) capable of restoring the activity of the fluoroquinolone levofloxacin against MDR P. aeruginosa. Methods: The antibacterial activity of the TXA11114–levofloxacin combination was evaluated using minimum inhibitory concentration (MIC) assays against panels of clinical isolates. Mechanistic studies included levofloxacin accumulation assays, ethidium bromide accumulation assays, outer-membrane permeability measurements, and whole-genome sequencing of mutants with altered potentiation phenotypes. In vivo efficacy was evaluated in murine thigh and lung infection models, while preliminary safety and drug-like properties were assessed using cytotoxicity assays and in vitro ADME profiling. Results: The TXA11114–levofloxacin combination produced > 1 log₁₀ CFU reductions in bacterial burden in murine thigh and lung infection models, exceeding the activity of levofloxacin monotherapy. TXA11114 markedly potentiated levofloxacin activity, producing substantial reductions in levofloxacin MIC values across multiple MDR clinical isolates, and also enhanced the activity of several additional efflux pump substrates, including β-lactams, tetracyclines, chloramphenicol, and trimethoprim–sulfamethoxazole. Mechanistic experiments demonstrated increased intracellular accumulation of efflux substrates without evidence of nonspecific membrane disruption, and mutations in ompH were associated with altered potentiation phenotypes. Conclusions: The TXA11114–levofloxacin combination produced significantly greater bacterial reductions than levofloxacin monotherapy in murine infection models. Levofloxacin was selected because fluoroquinolone resistance in P. aeruginosa is frequently driven by efflux-mediated mechanisms. While this study focused on levofloxacin potentiation, future work will evaluate additional efflux pump substrates and further define the molecular target of TXA11114. Full article

To overcome active site blockage and poor interfacial contact in traditional syntheses, PtNi bimetallic nanoparticles were grown in situ on a microporous carbon paper via pulse electrodeposition. Firstly, the impact of deposition potential was investigated. The results indicate that the deposition potential significantly modulates the surface Pt⁰/Pt²⁺ ratio; concurrently, a shift toward more negative potentials intensified nanoparticle agglomeration. The effects of the duty cycle were investigated at an optimal deposition potential of −0.95 to −0.4 V. A duty cycle of 30% yielded the optimal Pt⁰/Pt²⁺ ratio. Furthermore, TEM revealed a coexisting strain profile of bulk PtNi lattice contraction and localized expansion at peripheral Pt (111) facets. This synergistic tuning of surface valence and strain optimizes the thermodynamic balance between oxygen adsorption and intermediate desorption on Pt sites. In summary, the optimal catalyst, prepared at a deposition potential of −0.95 V and a duty cycle of 30%, showed the best reaction behavior in the oxygen reduction reaction with an initial onset potential of 0.92 V (vs. RHE). After 5000 cycles of testing, the catalyst showed a constant durability, with the onset potential degrading only marginally to 0.87 V. This work successfully demonstrates that the surface morphology and valence states of the catalyst can be effectively tailored by regulating the pulse voltage and duty cycle. Full article

Fenton-based processes are widely used advanced oxidation methods that are known for degrading persistent pollutants. However, these techniques often generate significant amounts of iron-containing sludge, which poses environmental disposal challenges due to its complex composition. Furthermore, the sludge produced by the Fenton process contains a high content of Fe(III) compounds, which can serve as an iron source to stimulate dissimilatory iron reduction (DIR), enhancing the performance of anaerobic digestion. Based on the characterization results from a previous study, this work investigated the use of the ferrous precipitate generated by the electrochemical peroxidation process applied to tannery wastewater treatment as an additive to enhance volatile fatty acids (VFAs) production during dark fermentation. The performance of ferrous precipitate (R-Fe₃O₄) was compared to that of conventional magnetite (Fe₃O₄) during dark fermentation under high organic loading conditions, emphasizing their potential to enhance hydrolysis efficiency and VFAs production yields, while promoting sustainable resource recovery and reuse within a circular bioeconomy framework. The results showed that the addition of both Fe₃O₄ and R-Fe₃O₄ significantly increased the VFAs yields, with a predominance of long-chain fatty acids. The presence of CaCO₃ in the ferrous precipitate contributed to maintaining a stable pH environment, supporting microbial activity and enhancing the hydrolysis of soluble compounds. Moreover, the availability of essential micronutrients within the ferrous precipitate favored greater microbial diversity. Consequently, the addition of R-Fe₃O₄ promoted VFAs production, even at higher organic loading rates, suggesting a promising application of Fenton-based by-products as functional additives to improve the economic and environmental performance of the dark fermentation process. Full article

Cities worldwide are turning to green infrastructure (GI) as a potential decentralized pathway to stormwater management, heat abatement, and other climate adaptation and wellbeing benefits. As with environmental governance, public engagement in GI planning—from design to implementation and maintenance—is necessary to incorporate diverse perspectives, better understand the potential impact of environmental policies, and ensure fair and equitable outcomes. However, GI is different from broader environmental governance approaches in that it demands on-the-ground labor and long-term maintenance, which are crucial for ecosystem function. In this paper, we conduct a comprehensive literature review of 46 articles published between 2014 and 2024 to provide a more nuanced understanding of public engagement for GI in municipal settings. Results reveal diverse and innovative approaches to engagement that involve integrating social and environmental data, on-the-ground activities, and working groups. We further highlight four key characteristics of GI engagement: (1) the multifunctionality of GI, (2) the incorporation of public and private land, (3) effects on community-building and sense of place, and (4) environmental and social justice. By embracing the multifunctionality of GI and centering justice, engagement efforts are more likely to recruit diverse community members, maintain long-term engagement, and simultaneously address multiple social and environmental needs. Full article

Background: The key parameters determining the bioavailability of an active pharmaceutical ingredient are its solubility/dissolution rate in physiological fluids and permeability across biological membranes. Highly accurate in vitro prediction of bioavailability is a key issue that typically arises during the development of new drug formulations and the improvement of existing ones. Objectives: The objective of the present work is to study the dissolution/release and permeation of olanzapine (OLZ) from two- and three-component solid dispersions (SDs) with sulfobutylether-β-cyclodextrin (SBE-β-CD) and several pharmaceutical adjuvants as solubilizing agents. Methods: Solid dispersions were prepared by mechanical grinding and characterized with X-ray Phase analysis (PXRD), Fourier Transform Infrared (FTIR) and Raman spectroscopy, Differential Scanning Calorimetry (DSC), and Scanning Electron Microscopy (SEM). Results: Raman spectroscopy was shown to be the best for revealing the interactions of OLZ with SBE-β-CD and γ-aminobutyric acid (GABA) in the three-component SD. The kinetic dependences of OLZ release and diffusion through the cellulose membrane were thoroughly described by quantitative parameters and classified according to the drug release mechanism. Significant improvement of release rate, OLZ concentration, and permeation with SDs compared to the pure OLZ was demonstrated. Conclusions: It was shown that the selected dispersions were stable when stored under normal conditions but underwent changes upon exposure to elevated temperature and humidity. The nature of these changes was determined by the properties of the components and their mutual interactions. Full article

Excessive macrophage activation is thought to be the primary cause of the cytokine storm that results in severe coronavirus disease 2019 (COVID-19) complications. The underlying mechanisms remain elusive, and more research is needed to find disease-critical genes and develop effective therapies. In this study, we used publicly accessible microarray datasets of cytokine storm in cultured human monocyte-derived macrophages challenged with cytokines, and employed bioinformatics, such as weighted gene co-expression network analysis (WGCNA) and differential expression analysis, to dissect gene expression profiles and identify putative disease-related molecules. Initially, three co-expression modules and related key genes were discovered, which highly correlated to macrophages challenged with cytokines. Then, a preliminary gene expression signature consisting of 203 upregulated and 24 downregulated genes was identified. Next, protein–protein interaction analysis and hub gene identification were used to identify 11 crucial hub genes, namely tripartite motif-containing 21 (TRIM21), interferon regulatory factor 1 (IRF1), guanylate binding protein 1 (GBP1), transporter associated with antigen processing 1 (TAP1), nuclear myosin I (NMI), interleukin 15 receptor subunit alpha (IL15RA), apolipoprotein L1 (APOL1), intercellular adhesion molecule 1 (ICAM-1), protein tyrosine phosphatase non-receptor type 1 (PTPN1), E74-like ETS transcription factor 4 (ELF4) and guanylate binding protein 2 (GBP2). Then, the LINCS L1000 characteristic direction signatures search engine (L1000CDS2) was employed for drug repurposing studies. Dasatinib was predicted to be the leading therapeutic compound to perturb the gene signature of cytokine storm in human macrophages. Connectivity Map results suggested that dasatinib may normalize ICAM-1 expression. In addition, the results of molecular docking studies and molecular dynamics simulation revealed that dasatinib may spontaneously interact with ICAM-1 via several key residues and form a relatively stable protein–ligand complex. Overall, this work, based on an analysis of co-expression correlation networks, gene expression signatures and pivotal genes in human macrophages challenged with cytokines, combined with drug repurposing studies, demonstrated that dasatinib may interact with ICAM-1 and could be a potential candidate for cytokine storm. However, due to the limitations of computational approaches, further experimental validation is necessary. Full article

Nutrient inputs from human activities, such as agriculture and sewage discharge, influence algal blooms in water bodies. In Ecuador, the Daule River receives wastewater discharges. In addition, poor agricultural practices, including the unsuitable use of fertilisers in combination with soil erosion and surface runoff processes, increase the nutrient load to the river. Considering this, the objective of this study was to evaluate environmental and biological variables using statistical analysis to identify the parameters that influence algal blooms in the main stem of the Daule River. The methodology consisted of two phases: (i) data collection, including water sampling and laboratory work for the analysis of nutrients and phytoplankton, and (ii) statistical analysis, which includes univariate, bivariate, inferential and multivariate analysis (STATICO technique). The results showed that pH and dissolved oxygen were the main drivers of diatoms (Polymyxus coronalis and Aulacoseira granulate) and the charophyte Mougeotia sp. Similarly, ammonium-N was the main driver of the diatom Ulnaria ulna and the cyanobacteria Planktothrix cf. agardhii. The outcomes of this study identified the main environmental variables driving blooms of the five most abundant species, providing a basis for the development of ecological models in the context of land use and climate change. Full article

Severe Fever with Thrombocytopenia Syndrome (SFTS) is caused by the SFTS virus (SFTSV) and is associated with a high mortality rate. Although previous studies have reported RNA modifications such as m6A on SFTSV RNA, an integrated analysis of native viral transcript architecture and multiple RNA modification types within infected cells remains lacking. Here, we used Oxford Nanopore direct RNA sequencing (DRS) to analyze native SFTSV RNA in infected cells, combining strand-specific alignment, isoform reconstruction through read endpoint clustering, isoform-level quantification, and signal-level modification identification using unmodified in vitro transcripts as a baseline. This approach allowed us to construct detailed maps of the L, M, and bidirectionally encoded S segments at single-molecule, isoform-level resolution. The results reveal a “length-layering” pattern in SFTSV transcription, anchored by recurrent 3′ termination hotspots: only a few full-length transcripts dominate expression, whereas multiple reproducible truncated isoforms were associated with discrete termination windows, a pattern less consistent with random degradation alone and suggestive of regulated transcript termination. At the single-nucleotide level, the modification landscape is predominantly Ψ (pseudouridine), followed by m⁵C (5-methylcytosine), with sparse m⁶A (N6-methyladenosine). Modification hotspots are co-located across isoforms at the same genomic coordinates, exhibiting segmental/strand asymmetry, with sharper peaks on (−) RNA. These patterns provide a testable framework and raise the possibility that transcript-boundary organization and site-constrained Ψ/m5C signals may be associated with variation in viral RNA output. More broadly, isoform proportions around termination hotspots and Ψ/m5C-enriched regions at conserved sites may serve as quantitative features for characterizing viral RNA organization and prioritizing targets for future functional investigation. Our single-molecule integrated map establishes a reproducible methodological framework for studying SFTSV RNA regulation and provides a resource for future work aimed at assessing how transcript boundaries and RNA modification patterns may relate to polymerase activity and virus–host interaction. Full article

Excessive lipid accumulation, a hallmark characteristic of high-fat diet (HFD)-induced obesity, has become a worldwide challenge, necessitating the exploration of secure and efficacious natural products for its intervention. In the present work, a polysaccharide (MCP) was extracted and purified from Mesembryanthemum crystallinum L., a novel halophyte, and its physicochemical properties, in vitro fermentation characteristics, lipid-lowering activity, and underlying mechanisms were systematically investigated. Physicochemical analysis revealed that MCP is an acidic polysaccharide, with galacturonic acid as the predominant monosaccharide component, broad molecular weight distribution, and a porous structural morphology. In vitro fermentation experiments demonstrated that MCP could be effectively utilized by human fecal microbiota, significantly promoting the yield of short-chain fatty acids (SCFAs), particularly butyrate at high concentrations, which outperformed inulin. 16S rDNA sequencing uncovered that MCP optimized microbiota composition by enriching SCFA-producing beneficial bacteria (Prevotella_9, Faecalibacterium) while suppressing opportunistic pathogens (Megamonas, Escherichia-Shigella). Metabolomic analysis of fermentation broth revealed that MCP significantly affected microbial glycerophospholipid metabolic pathways. Experiments in Caenorhabditis elegans (C. elegans) confirmed that MCP inhibited HFD-induced lipogenesis, which was linked to the regulation of the nhr-49/sbp-1-mediated lipogenesis pathway. For the first time, using an antibiotic-induced microbiota depletion model in C. elegans, the lipid-lowering effect of MCP was observed to disappear, suggesting a potential role of the gut microbiota in mediating this effect. This investigation establishes a scientific basis for MCP as a novel prebiotic or dietary supplement for managing obesity-related lipid accumulation. Full article

Archaeological evidence for prehistoric placer tin mining is rare due to the ephemeral nature of the workings and the associated tools in the dynamic setting of active river systems. Here, we report an additional line of evidence for metallurgical activities at stream tin mining in Serbia at Mt. Cer and Bukulja. Rivers at these locations contain Pb-rich-glass grains, many of which are also enriched in Cu and Sn. Compositionally, the detrital grains of glass are similar to the vitreous infillings on a bleached ceramic sherd found at Spasovine, an archaeological site situated on the bank of the tin-rich Milinska River. The high-Pb-bearing (average 42 wt%) and Sn-bearing (average 0.7 wt%) composition of the glass, along with the inclusions of secondary cassiterite, indicate that the slag was derived from the refinement of leaded bronze (i.e., lead removal). Although the detrital glass slag grains lack direct archaeological context, broader archaeological observations limit their production to either the Roman or Medieval Periods. The presence of Pb-Cu-Sn metallurgical glass grains in a river at Bukulja provides the first concrete evidence of prehistoric tin mining at this locality, which demonstrates that sluicing for crushed glassy residues is a viable means to prospect for as yet undiscovered sites of ancient metallurgical activities. Full article

Bovine viral diarrhea virus (BVDV), a globally persistent pathogen, causes bovine viral diarrhea-mucosal disease (BVD-MD), a contagious bovine disease posing significant pressures on both public health and economic development. Baicalin (BA), a flavonoid derived from Scutellaria baicalensis, exhibits broad antiviral activities but suffers from poor aqueous solubility and low bioavailability, limiting its therapeutic potential against BVDV. To address this limitation, we developed BA-loaded poly (ethylene gly-col)-poly (lactic-co-glycolic acid) (PEG-PLGA) nanoparticles (BA-PEG-PLGA NPs). While autophagy and NLRP3 inflammasome activation have been individually implicated in viral pathogenesis, their functional crosstalk during BVDV infection remains uncharacterized. Herein, we evaluated the antiviral efficacy of BA-PEG-PLGA NPs through integrated in vitro and in vivo experiments. We employed quantitative polymerase chain reaction (qPCR), transcriptome sequencing, Western blot analysis, immunofluorescence microscopy, flow cytometry, and enzyme-linked immunosorbent assay (ELISA) to investigate the mechanisms by which BA and BA-PEG-PLGA NPs combat bovine viral diarrhea virus (BVDV) infection. We found that both free BA and BA-PEG-PLGA NPs effectively attenuated BVDV replication in vitro and in vivo; notably, the nano-formulation exhibited superior efficacy. Mechanistically, BA and its nano-formulation restored autophagy homeostasis, suppressed ROS overproduction, and blocked NLRP3 inflammasome activation and pyroptotic cell death effects comparable to the specific NLRP3 inhibitor MCC950. These findings establish the autophagy–NLRP3/pyroptosis axis as a critical pathogenic mechanism in BVDV infection and reveal that nano-formulated baicalin represents an antiviral strategy by coordinately targeting this axis. This work not only provides a translatable nanomedicine approach for BVDV control but also expands the mechanistic understanding of flavonoid-based interventions in viral inflammatory diseases. Full article

Construction materials are the primary source of embodied carbon in long-span bridge projects, particularly for steel-intensive structures. This study presents an empirical construction-stage carbon footprint assessment of the Anhsin Bridge, an asymmetric cable-stayed steel truss bridge in Taiwan. Using the emission factor method in accordance with ISO 14067 and Taiwan Environmental Protection Administration guidelines, a cradle-to-gate (A1–A5 equivalent) system boundary was applied, covering material production, transportation, and on-site construction activities. Total construction-stage emissions were estimated at 55,349 tCO₂e, dominated by structural steel (51.8%), followed by reinforcing steel, concrete, and cement. Material-related emissions accounted for over 90% of the total, highlighting the critical role of material selection in embodied carbon reduction. Three practical mitigation strategies were evaluated using verified project data, as follows: 40% cement substitution with supplementary cementitious materials, optimized steel erection methods, and enhanced reuse of formwork and temporary works. The combined scenario achieved a 7.3% reduction in construction-stage emissions without compromising constructability. The findings demonstrate the effectiveness of material-oriented, constructability-aware strategies for reducing embodied carbon in steel-intensive bridge construction. Full article

Authentic, situated learning experiences which mirror the collaborative nature of healthcare practice are essential in preparing students for their future professions. Feedback literacy may be thought of as the understanding, capacity, and disposition needed to make sense of information and use it to enhance work or learning strategies. This study explored how feedback literacy can be developed through situated, interprofessional peer-to-peer feedback within a community-based paediatric health screening programme. Using an exploratory Action Research qualitative design, the planning activities stage explored current practice, gathering student insights via interviews, reflections, and a workshop to co-design an Interprofessional Feedback Conversation Guide (IPFCG). The IPFCG was piloted, integrating structured feedback tools and protected time for peer exchange, within the community screening activity. Feedback regarding use of the IPFCG contributed to the gathering data stage, which was followed by the evaluation and reflection stage. Evaluation revealed four key themes: value, engagement, optimising relationships, and structuring conversations. Students valued receiving feedback from peers outside their discipline, actively engaged with the process, emphasised the importance of building rapport, and utilised structured dialogue. These findings highlight how authentic, field-based learning can foster feedback literacy, enhancing the development of professional identity. The interprofessional nature of the program reflects the complexity of modern healthcare and demonstrates how curriculum-integrated models of authentic learning can enhance student engagement and workplace readiness. This study contributes to the evolving conversation about embedding authenticity in higher education and offers a practical model for building collaborative communication within situated learning experiences at scale. Full article