Search Results (46)

This study determined the impact of ultrasound duration on the encapsulation of 3,3′-diindolylmethane (DIM) using whey protein concentrate (WPC) nanoparticles. Whey-protein-concentrate-based DIM nanoparticles were prepared and treated with different ultrasound times (0–20 min) with 30% amplitude at 4 °C. The results showed that ultrasound treatment significantly decreased the mean particle size (from 265 nm to 218 nm) and the Polydispersity Index (PDI) value (from 0.49 to 0.43) as well as zeta potential values were notably increased. The encapsulation efficiency (EE%) increased with increasing sonication time (0–20 min) from 76% to 88%, respectively. The ultrasound treatment had a significant effect on the apparent viscosity, and a decrease in the viscosity as a function of shear rate was observed with increasing sonication time. The transmission electronic microscopy (TEM) micrographs demonstrated that all of the formulations treated with different sonication times had a smooth and uniform spherical shape and ultrasound treatment led to the reduction of particle size, especially after 20 min of ultrasound. The thermal stability of the WPC–DIM nanoparticles was enhanced with increasing sonication time by increasing peak denaturation temperature and enthalpy. The Fourier transform infrared spectroscopy (FT-IR) spectra analysis revealed that ultrasound treatment had a remarkable effect on the secondary structure of WPC–DIM nanoparticles; electrostatic interactions and hydrogen bonds between DIM and whey protein were strengthened. Moreover, the length of ultrasound treatment exhibited a significant effect on the DPPH (2,2-diphenyl-2-picrylhydrazyl) scavenging activity (from 56% to 62%) and ABTS(2,2′-azinobis(2 ethylbenzothiazoline-6-sulfonate) scavenging activity (from 47% to 68%). In conclusion, the ultrasound treatment successfully improved the physicochemical, microstructural, and antioxidative properties of WPC–DIM nanoparticles; therefore, it is considered an effective method to develop whey-protein-concentrate-based DIM nanoparticles for medical and nutritional applications. Full article

This study aimed to evaluate the impact of increasing total protein content on the rheological properties of liquid whole eggs. The study fills the gap between fundamental science and industrial application by exploring the potential for developing high-protein, functional egg products for health-conscious consumers and the food industry. Liquid whole egg samples were enriched with different percentages of egg white and whey proteins. Proteins were added either before or after heat treatment, followed by homogenization, to analyze the effects on rheological behavior. Results indicated that whey protein samples exhibit near-Newtonian behavior due to their high solubility and minimal protein interactions, while egg white protein samples, especially at higher concentrations, induce shear thinning behavior and increased viscosity due to their water-binding capacity and partial heat-induced denaturation. Flow behavior index (n) decreased by 62.7 ± 5.7% and 25.2 ± 1.8% for heat treated with 10% added egg white and whey protein samples, respectively; meanwhile, it decreased by 2.64 ± 0.06% for 10% of added egg white protein and increased by 12.0 ± 1.0% for 10% of whey protein when heat treatment was induced prior to protein additions. The findings from this study offer valuable insights for developing functional food enriched with whey and egg white proteins. Full article

This study sheds light on the potential of microbial transglutaminase (mTG)-mediated modification to enhance the properties of heat-denatured whey protein-based films. In this study, we investigated the biochemical modification of heat-denatured whey proteins (WPs) using mTG, an enzyme known for the ability of crosslinking reactions. By introducing ε-(γ-glutamyl)-lysine crosslinks via an acyl transfer reaction, mTG enhances the properties of bio-based materials. In this research, heated WPs were demonstrated to effectively serve as mTG substrates. The preparation of crosslinked bio-based material was achieved using a casting method under alkaline conditions (pH 12) in the presence of glycerol (40% w/w), which was added as a plasticizer to the film-forming solution (FFS). A comprehensive characterization of the FFSs and the resulting materials was carried out. The FFSs were quite stable as evidenced by Zeta potential values that were always around 30/40 mV regardless of the presence of the enzyme. The enzymatic modification increased the elongation at break of the materials from 10.4 ± 4.9 MPa to 27.6 ± 8.9 MPa, while decreasing both tensile strength and Young’s modulus, thereby making the resulting material more extensible. On the other hand, the enzyme affected both the CO₂ and O₂ barrier properties, with permeability values for these gases being 0.90 cm³ mm m⁻² day⁻¹ kPa⁻ and 0.26 cm³ mm m⁻² day⁻¹ kPa, respectively, when the films were cast without the enzymatic treatment, but decreasing to 0.14 ± 0.02 cm³ mm m⁻² day⁻¹ kPa (CO₂) and 0.02 ± 0.02 cm³ mm m⁻² day⁻¹ kPa (O₂) in the presence of 24 U/g of mTG. These novel materials, prepared from renewable sources, could potentially be used in the food packaging field to replace/reduce the highly pollutant petroleum-based ones. Full article

Whey protein isolate (WPI) has functional properties such as gelation and emulsification. Emulsion gels combine the benefits of both emulsions and hydrogels. In this study, WPI hydrogels and emulsion gels were developed with goji oil (GO) as the oil phase by the inclusion of blueberry extract (BE) in the protein matrix. Heat-denatured WPI (hWPI) particles and emulsions were characterized in terms of size distribution, ζ-potential, interfacial protein, and anthocyanin partition. The inclusion of anthocyanins-rich blueberry extract led to the aggregation of hWPI particles, but it also increased the interfacial protein of 10% goji oil emulsions to 20% and decreased their size distribution to 120 and 325 nm. WPI hydrogels and emulsion gels were analyzed in terms of their water-holding capacity, which decreased from 98% to 82% with the addition of blueberry extract and goji oil. Syneresis, rheological, and morphological characteristics were also analyzed. The gelation time of hWPI particles and emulsions was shortened from 24 h to 12 h when incorporating blueberry extract to form a dense network. The network was the most homogeneous and densest in the presence of 3% blueberry extract and 5% goji oil. The co-inclusion of blueberry extract and goji oil increased the syneresis during the freeze–thaw cycles, with the values rising from 13% to 36% for 5% BE hydrogel and BE-containing emulsion gels after the first cycle. All WPI hydrogels and emulsion gels exhibit predominantly elastic behavior. Moreover, anthocyanin release, antioxidant activity, and the fatty acid composition profile were also analyzed during in vitro digestion. Soluble and free anthocyanins in the digested medium were reduced with the goji oil content but increased with the blueberry extract content. The stability of polyunsaturated fatty acids in the digested medium was improved by the addition of blueberry extract. The antioxidant activity of the digested medium increased with the content of blueberry extract but decreased with the content of goji oil. The ABTS^∙+ scavenging capacities decreased from 63% to 49% by increasing the content of GO from 0% to 10% and they increased from 48% to 57% for 5% BE and 10% GO emulsion gels as the BE content increased from 0% to 5% after 6 h of digestion. The data gathered should provide valuable insights for future efforts to co-encapsulate hydrophilic and hydrophobic agents, thereby enhancing their stability, bioavailability, and functional properties for potential applications in food industries. Full article

The flavor of dairy products crucially affects consumer purchase preference. Although the flavor and sensory perception of milk can be influenced by heat treatment during processing, the exact mechanism remains unclear. Therefore, this study analyzed the whey protein content and structural changes of milk heated at different time and temperature combinations and evaluated the flavor compounds and sensory characteristics of milk. The results showed that higher temperatures changed the secondary milk whey protein structures and gradually increased α-lactalbumin, β-lactoglobulin, and lactoferrin denaturation in the milk. There were differences in sensory characteristics of milk heated at different time and temperature combinations. The correlation analysis indicated that whey protein denaturation was negatively correlated with 1-octen-3-ol (p < 0.05) and positively associated with hexanal, isovaleric acid, γ-nonalactone, methyl palmitate, and phenol (p < 0.01). The changes in the content and secondary structure of whey proteins affected the interaction between flavor compounds and whey protein, which affected the release of flavor compounds. Consequently, the sensory characteristics of milk were influenced. This study provides a theoretical basis for exploring the interaction between whey proteins and flavor compounds. Full article

To enhance the functional properties of walnut protein isolate (WalPI), hydrophilic whey protein isolate (WPI) was selected to formulate WalPI-WPI nanoparticles (nano-WalPI-WPI) via a pH cycling technique. These nano-WalPI-WPI particles were subsequently employed to stabilize high internal phase Pickering emulsions (HIPEs). By adjusting the mass ratio of WalPI to WPI from 9:1 to 1:1, the resultant nano-WalPI-WPI exhibited sizes ranging from 70.98 to 124.57 nm, with a polydispersity index of less than 0.326. When the mass ratio of WalPI to WPI was 7:3, there were significant enhancements in various functional properties: the solubility, denaturation peak temperature, emulsifying activity index, and emulsifying stability index increased by 6.09 times, 0.54 °C, 318.94 m²/g, and 552.95 min, respectively, and the surface hydrophobicity decreased by 59.23%, compared with that of WalPI nanoparticles (nano-WalPI), with the best overall performance. The nano-WalPI-WPI were held together by hydrophobic interactions, hydrogen bonding, and electrostatic forces, which preserved the intact primary structure and improved resistance to structural changes during the neutralization process. The HIPEs stabilized by nano-WalPI-WPI exhibited an average droplet size of less than 30 μm, with droplets uniformly dispersed and maintaining an intact spherical structure, demonstrating superior storage stability. All HIPEs exhibited pseudoplastic behavior with good thixotropic properties. This study provides a theoretical foundation for enhancing the functional properties of hydrophobic proteins and introduces a novel approach for constructing emulsion systems stabilized by composite proteins as emulsifiers. Full article

The purpose of this study was to improve understanding of the structural and functional property changes that milk-protein concentrates undergo during production, particularly how the manufacturing route (heat treatment position and intensity), standardization (in osmosed water or ultrafiltrate permeate) and formulation (casein:whey protein (Cas:WP) ratio) influence the physico-chemical characteristics—hygroscopicity, particle size, sphericity, density and evolution of browning during storage. To obtain a comprehensive understanding of the parameters responsible for the distinctive characteristics of different powders, a multifactorial approach was adopted. Hygroscopicity depended mainly on the standardizing solution and to a lesser extent the Cas:WP ratio. The particle size of the heat-treated casein-dominant powders was up to 5 μm higher than for those that had had no heat treatment regardless of the standardizing solution, which also had no influence on the sphericity of the powder particles. The density of the powders increased up to 800 kg·m⁻³ with a reduced proportion of casein, and lactose and whey proteins participated in browning reactions during storage at 13 °C. In increasing order, the modality of heat treatment, the standardizing solution and the Cas:WP protein ratio influenced the key characteristics. This work is relevant for industrial applications to increase control over the functionalities of powdered products. Full article

Thermal-denatured whey protein-milk fat emulsion gels with different degrees of pre-emulsification were prepared by pre-emulsifying milk fat with thermal-denatured whey protein and used in the preparation of reduced-sodium processed cheeses. The effect of the thermal-denatured whey protein pre-emulsification process on the texture and microstructure of reduced-sodium processed cheeses was evaluated by studying the composition, color, texture, functional properties, microstructure and sensory analysis of the processed cheeses. The results showed that compared with cheese without pre-emulsified fat (1.5% ES control), the moisture content of cheese with pre-emulsified 100% fat (1.5% ES100) increased by 5.81%, the L* values increased by 7.61%, the hardness increased by 43.24%, and the free oil release decreased by 38%. The microstructure showed that the particle size of fat was significantly reduced, and the distribution was more uniform. In addition, compared with the cheese added with 3% emulsifying salt (3% ES control), the amount of emulsifying salt in the 1.5% ES100 decreased by 50%, but the fat distribution of the two kinds of cheese tended to be consistent, and there was no obvious change in texture characteristics and meltability. Sensory scores increased with the increase in pre-emulsification degree. Overall, the pre-emulsification of milk fat with thermal-denatured whey protein can reduce the sodium content of processed cheese and improve its quality. Full article

A glycosylated protein/procyanidin complex was prepared by self-assembly of glycosylated whey protein isolate and proanthocyanidins (PCs). The complex was characterized through endogenous fluorescence spectroscopy, polyacrylamide gel electrophoresis, Fourier infrared spectroscopy, oil–water interfacial tension, and transmission electron microscopy. The results showed that the degree of protein aggregation could be regulated by controlling the added amount of procyanidin, and the main interaction force between glycosylated protein and PCs was hydrogen bonding or hydrophobic interaction. The optimal binding ratio of protein:PCs was 1:1 (w/w), and the solution pH was 6.0. The resulting glycosylated protein/PC compounds had a particle size of about 119 nm. They exhibited excellent antioxidant and free radical-scavenging abilities. Moreover, the thermal denaturation temperature rose to 113.33 °C. Confocal laser scanning microscopy (CLSM) images show that the emulsion maintains a thick interface layer and improves oxidation resistance with the addition of PCs, increasing the application potential in the functional food industry. Full article

The effects of variations in the heat treatment process of milk on its quality and flavor are inevitable. This study investigated the effect of direct steam injection and instantaneous ultra-high-temperature (DSI-IUHT, 143 °C, 1–2 s) sterilization on the physicochemical properties, whey protein denaturation (WPD) rate, and volatile compounds (VCs) of milk. The experiment compared raw milk as a control with high-temperature short-time (HTST, 75 °C 15 s and 85 °C 15 s) pasteurization and indirect ultra-high-temperature (IND-UHT, 143 °C, 3–4 s) sterilization. The results showed no significant differences (p > 0.05) in physical stability between milk samples with different heat treatments. The DSI-IUHT and IND-UHT milks presented smaller particle sizes (p < 0.05) and more concentrated distributions than the HTST milk. The apparent viscosity of the DSI-IUHT milk was significantly higher than the other samples (p < 0.05) and is consistent with the microrheological results. The WPD of DSI-IUHT milk was 27.52% lower than that of IND-UHT milk. Solid-phase microextraction (SPME) and solvent-assisted flavor evaporation (SAFE) were combined with the WPD rates to analyze the VCs, which were positively correlated with ketones, acids, and esters and negatively associated with alcohols, heterocycles, sulfur, and aldehydes. The DSI-IUHT samples exhibited a higher similarity to raw and HTST milk than the IND-UHT samples. In summary, DSI-IUHT was more successful in preserving the milk’s quality due to its milder sterilization conditions compared to IND-UHT. This study provides excellent reference data for the application of DSI-IUHT treatment in milk processing. Full article

Whey cheeses have been produced from the very early steps of cheesemaking practices as a sustainable way to utilize whey, which is the main by-product of cheesemaking. Traditional whey cheeses, manufactured with similar processes, are Ricotta, Ricotta salata or Ricottone, and Ricotta fresca in Italy; Anthotyros, Myzithra, Manouri, Xynomyzithra, and Urda in Greece; Urda in Serbia and Romania as well as in other countries such as Israel; Lor in Turkey; Anari in Cyprus; Skuta in Croatia and Serbia; Gjetost and Brunost in Norway; Mesost and Messmör in Sweden; Mysuostur in Iceland; Myseost in Denmark; Requeijão in Portugal; and Requesón in Spain and Mexico. The production of whey cheese is based on the denaturation of whey proteins by heating to 88–92 °C. The specific processing conditions and aspects of the microbiology of whey cheeses are discussed. The special characteristics of whey cheeses, which are high pH and high moisture content, make them susceptible to microbial growth. Due to the limited shelf life of these products, extended research has been carried out to extend the shelf life of whey cheese. The sustainable preservation approaches, such as modified atmosphere packaging, addition of herbs and/or plant extracts, and bio-preservation methods are reviewed. Moreover, novel whey cheeses focused on functional properties have developed during the last 10 years. Full article

Oil-in-water emulsions contain the inner oil phase, the protein membrane at the interface and the aqueous phase. In this study, the spatial partition of resveratrol was investigated in sunflower oil, fish oil, medium-chain triglyceride (MCT) and peppermint oil emulsions stabilized by native whey protein isolate (WPI), heat-denatured WPI and sodium caseinate. Resveratrol was added in the aqueous phase of emulsions and its partition was analyzed in term of resveratrol solubility in bulk oil and in the aqueous phase of protein, protein concentration and interfacial protein. The final concentrations of resveratrol in the aqueous phase were basically greater than those in the oil phase of fish oil, sunflower oil and MCT oil emulsions, while the final concentrations of resveratrol in the oil phase were greater than those in the aqueous phase of peppermint oil emulsions. The difference in the interfacial partition of resveratrol and proteins increased as the polyphenol solubility in bulk oil increased. Resveratrol solubility in the oil phase drove its transfer from the aqueous phase into the oil phase in all emulsions, except that the interfacial protein also contributed to the transfer in fish oil emulsions. The oil–water interface provided the microenvironment for the enrichment of resveratrol by proteins. Full article

The viability of probiotics is strictly influenced by the production, storage, and digestion, while microencapsulation is a technology that can protect them against harsh environments. In this study, the impact of different core-to-wall ratios and wall material formulations on physical properties and the cell number of the microcapsules were investigated. The samples with core-to-wall ratio 1:1 have a significantly higher cell number, encapsulation efficiency, and bulk density than samples with core-to-wall ratio 1:1.5. The yields of the encapsulation method were changes in the opposite direction. Meanwhile, core-to-wall ratios and formulation have a significant effect on the cell number of the microcapsules during the in vitro SGJ test, whereas time, core-to-wall ratios, and formulation have a similar influence in the in vitro SIJ test. Moreover, probiotic apple juices stored at 4 °C for 6 weeks kept the highest cell number at the end. Furthermore, probiotic apple juices fortified by microcapsules coated with WP:DWP 1:1 in core-to-wall ratio 1:1 and stored at 4 °C for 4–8 weeks exhibited a significantly lower pH value. In summary, both whey proteins and denatured whey proteins are as good as coating material for microencapsulation of probiotic bacteria Lactobacillus plantarum 299v strains. These microcapsules have high potential in the production of probiotic apple juice even by fermentation or fortification methods. Full article

Pre-spray-drying processing may affect stability after reconstitution of emulsion-based powders, such as infant formulas. This study aimed to evaluate the effects of pasteurization temperature and total solids (TS) of the feed on the stability of the emulsions obtained from the reconstituted powders. Four infant formula powders (50%-75 °C, 50%-100 °C, 60%-75 °C, and 60%-100 °C) were produced at pilot scale, from emulsions with 50 or 60% TS pasteurized at 75 or 100 °C for 18 s. Both the emulsion feeds and the emulsions from the reconstituted powders (12.5% TS) were analyzed. The results showed that feeds with 60% TS were flocculated, as indicated by the large particle size and viscosity and the pseudoplastic behavior. Light microscopy revealed that, during spray drying, the flocs were disrupted in 60%-100 °C, while the 60%-75 °C emulsion remained flocculated, reducing its stability post-reconstitution. Although all four emulsions were mainly stabilized by caseins, the presence of β-lactoglobulin was also detected at the oil–water interface, in native state in the formulas preheated at 75 °C and aggregated in the formulas preheated at 100 °C. In conclusion, both the degree of whey protein denaturation (resulting from pasteurization) and the TS of the concentrates during infant formula production affected the emulsion stability of the reconstituted powders. Full article

The application of pulsed electric fields (PEFs) for the inactivation of Escherichia coli, suspended in a protein shake beverage and diluted with sterilized distilled water was carried out. Square bipolar pulses in the range of 25–40 kV/cm electric field intensities were applied at different frequencies (400–900 Hz) to investigate the effect of different PEF conditions on the microbial population and proteins relevant to this functional beverage. The treatment temperature was kept below the lethal temperature of the microorganism under investigation. As power consumption plays an important role in the efficiency of the PEF application, the dissipated power was also estimated. Four log reductions in the E. coli population were obtained with 10 pulses at a 40 kV/cm field intensity and 25 pulses at a 25 kV/cm field intensity. PEF-treated whey-protein concentrates showed less denaturation in proteins than thermally treated concentrates, especially for lower electric field intensities (0% denaturation ± 0.007 at 25 kV/cm and 900 Hz, 4.41% denaturation ± 0.008 at 40 kV/cm and 400 Hz). Soy protein isolates manifested high sensitivity to PEF processing and resulted in denaturation and aggregation in the protein structure. Full article