Search Results (22)

The ScanSAR mode image obtained by the Gaofen-3 (GF-3) satellite has an imaging width of up to 130–500 km, which is of great significance in monitoring oceanography, meteorology, water conservancy, and transportation. To address the issues of subswath misalignment and the inability to correct in the processing of GF-3 ScanSAR images in coastal areas using software such as PIE, ENVI, and SNAP, a method for mosaicking and correcting GF-3 ScanSAR images with subswaths that overlap within specified range constraints is proposed. This method involves correlating the coefficients of each subswath thumbnail image in order to determine the extent of the overlap range. Given that the matching points are constrained to the overlap between subswaths, the normalized cross-correlation (NCC) matching algorithm is utilized to calculate the matching points between subswaths. Subsequently, the random sampling consistency (RANSAC) algorithm is employed to eliminate the mismatching points. Subsequently, the subswaths should be mosaicked together with the stitching translation of subswaths, based on the coordinates of the matching points. The image brightness correction coefficient is calculated based on the average grayscale value of pixels in the overlapping region. This is performed in order to correct the grayscale values of adjacent subswaths and thereby reducing the brightness difference at the junction of subswaths. The entire ScanSAR slant range image is produced. By employing the Range–Doppler model for indirect orthorectification, corrected images with geographic information are generated. The experiment utilized three coastal GF-3 ScanSAR images for mosaicking and correction, and the results were contrasted with those attained through PIE software V7.0 processing. This was conducted to substantiate the efficacy and precision of the methodology for mosaicking and correcting coastal GF-3 ScanSAR images. Full article

The increasing water temperature due to climate change has led to more frequent algae blooms and deteriorating water quality in coastal areas and rivers worldwide. To address this, we developed a deep learning-based model for identifying floating algae blooms using PlanetScope optical images and the Shifted Windows (Swin) Transformer architecture. We created 1,998 datasets from 105 scenes of PlanetScope imagery collected between 2018 and 2023, covering 14 water bodies known for frequent algae blooms. The methodology included data pre-processing, dataset generation, deep learning modeling, and inference result generation. The input images contained six bands, including vegetation indices such as the Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI), enhancing the model’s responsiveness to algae blooms. Evaluations were conducted using both single-period and multi-period datasets. The single-period model achieved a mean Intersection over Union (mIoU) between 72.18% and 76.47%, while the multi-period model significantly improved performance, with an mIoU of 91.72%. This demonstrates the potential of our model and highlights the importance of change detection in multi-temporal images for algae bloom monitoring. Additionally, the padding technique proposed in this study resolved the border issue that arises when mosaicking inference results from individual patches, providing a seamless view of the satellite scene. Full article

River temperature is a critical parameter influencing aquatic ecosystems and water quality. However, it can be changed by natural (e.g., flow and depth conditions) and human factors (e.g., waste and industrial water drainage). Satellite-based monitoring offers a valuable tool for assessing river temperature on a large scale, elucidating the impacts of various factors. This study aims to analyze the spatiotemporal dynamics of surface water temperature (SWT) in the medium-sized Tisza River in response to natural and anthropogenic influences, employing Landsat satellites and in situ water temperature data. The validity of the Landsat-based SWT estimates was assessed across different channel sections with varying sizes. The longitudinal thermal profile of the Tisza was analyzed by mosaicking, monthly, four Landsat 9 images, covering the entire 962 km length of the Tisza in 2023. The impact of climate change was evaluated by analyzing SWT trends at a specific site from 1984 to 2024, utilizing 483 Landsat 4–9 images. The findings indicated elevated accuracy for Landsat-based SWT estimation (R² = 0.94; RMSE = 3.66 °C), particularly for channel sizes covering ≥ 3 pixels. Discharge, microclimatic conditions, and channel morphology significantly influence SWT, demonstrating a general increasing trend downstream with occasional decreases during the summer months. Dams were observed to lower the SWT downstream due to cooler bottom reservoir water discharge, with more pronounced differences during the summer months (1–3 °C). Tributaries predominantly (75%) elevated the SWT in the Tisza River, albeit with varying magnitudes across different months. Over the 40-year study period, an increasing trend in SWT was discerned, with an annual rise rate of 0.0684 °C. While the thermal band of Landsat satellites proved valuable for investigating the Tisza River’s thermal profile at a broad scale, finer spatial resolution bands are necessary for detecting small-scale phenomena such as thermal plumes and localized temperature variations in rivers. Full article

This study aimed to analyze the trend in land surface temperature (LST) over time using the entire archive of the available cloud-free Landsat images from 1986 to 2022 for Jordan and its nine local climate zones (LCZs). Two primary datasets were used (i) Landsat-5; -8 imagery, and (ii) map of LCZs of Jordan. All LST images were clipped, preprocessed, and checked for cloud contamination and bad pixels using the quality control bands. Then, time-series of monthly LST images were generated through compositing and mosaicking processes using cloud computing functions and Java scripts in Google Earth Engine (GEE). The Mann–Kendall (MK) test and Sen’s slope estimator (SSE) were used to detect and quantify the magnitude of LST trends. Results showed a warming trend in the maximum LST values for all LCZs while there was annual fluctuation in the trend line of the minimum LST values in the nine zones. The monthly average LST values showed a consistent upward trajectory, indicating a warming condition, but with variations in the magnitude. The annual rate of change in LST for the LCZs showed that the three Saharan zones are experiencing the highest rate of increase at 0.0184 K/year for Saharan Mediterranean Warm (SMW), 0.0185 K/year for Saharan Mediterranean Cool (SMC), and 0.0169 K/year for Saharan Mediterranean very Warm (SMvW), indicating rapid warming in these regions. The three arid zones came in the middle, with values of 0.0156 K/year for Arid Mediterranean Warm (AMW), 0.0151 for Arid Mediterranean very Warm (AMvW), and 0.0139 for Arid Mediterranean Cool (AMC), suggesting a slower warming trend. The two semi-arid zones and the sub-humid zone showed lower values at 0.0138, 0.0127, and 0.0117 K/year for the Semi-arid Mediterranean Cool (SaMC), Semi-arid Mediterranean Warm (SaMW) zones, and Semi-humid Mediterranean (ShM) zones, respectively, suggesting the lowest rate of change compared to other zones. These findings would provide an overall understanding of LST change and its impact in Jordan’s LCZs for sustainable development and water resources demand and management. Full article

Uncrewed-Aerial Vehicles (UAVs) and hyperspectral sensors are emerging as effective alternatives for monitoring water quality on-demand. However, image mosaicking for largely featureless coastal water surfaces or open seas has shown to be challenging. Another pertinent issue observed is the systematic image misalignment between adjacent flight lines due to the time delay between the UAV-borne sensor and the GNSS system. To overcome these challenges, this study introduces a workflow that entails a GPS-based image mosaicking method for push-broom hyperspectral images, together with a correction method to address the aforementioned systematic image misalignment. An open-source toolkit, CoastalWQL, was developed to facilitate the workflow, which includes essential pre-processing procedures for improving the image mosaic’s quality, such as radiometric correction, de-striping, sun glint correction, and object masking classification. For validation, UAV-based push-broom hyperspectral imaging surveys were conducted to monitor coastal turbidity in Singapore, and the implementation of CoastalWQL’s pre-processing workflow was evaluated at each step via turbidity retrieval. Overall, the results confirm that the image mosaicking of the push-broom hyperspectral imagery over featureless water surface using CoastalWQL with time delay correction enabled better localisation of the turbidity plume. Radiometric correction and de-striping were also found to be the most important pre-processing procedures, which improved turbidity prediction by 46.5%. Full article

Aquatic ecosystems are crucial in preserving biodiversity, regulating biogeochemical cycles, and sustaining human life; however, their resilience against climate change and anthropogenic stressors remains poorly understood. Recently, unmanned aerial vehicles (UAVs) have become a vital monitoring tool, bridging the gap between satellite imagery and ground-based observations in coastal and marine environments with high spatial resolution. The dynamic nature of water surfaces poses a challenge for photogrammetric techniques due to the absence of fixed reference points. Addressing these issues, this study introduces an innovative, efficient, and accurate workflow for georeferencing and mosaicking that overcomes previous limitations. Using open-source Python libraries, this workflow employs direct georeferencing to produce a georeferenced orthomosaic that integrates multiple UAV captures, and this has been tested in multiple locations worldwide with optical RGB, thermal, and multispectral imagery. The best case achieved a Root Mean Square Error of 4.52 m and a standard deviation of 2.51 m for georeferencing accuracy, thus preserving the UAV’s centimeter-scale spatial resolution. This open-source workflow represents a significant advancement in the monitoring of marine and coastal processes, resolving a major limitation facing UAV technology in the remote observation of local-scale phenomena over water surfaces. Full article

A water quality parameter retrieval scheme based on the UAV push-broom hyperspectral images was designed and validated for assessing the ecological health of Zhang Wei Xin River in Dezhou distinct, China. First, a UAV carrying a push-broom hyperspectral imager that is lightweight and has a small size was used to acquire high spatial and hyperspectral resolution images. Then, the mosaicked reflectance data of the whole river were produced by a seamless image mosaicking method with high geometrical accuracy and spectral fidelity. Next, the in-field measurements of different parameters and the corresponding spectral reflectance from the mosaicked images at the sampling points were used to build the water quality parameter retrieval models for total phosphorus (TP), chlorophyll a (Chla), and total suspended solids (TSS). To validate the model, the retrieval results of the testing sampling points were compared with the measured parameters. The coefficients of determination R² of TP, Chla, and TSS were 0.886, 0.918, and 0.968, respectively. The retrieved TP, Chla, and TSS maps showed that the water pollution of Zhang Wei Xin River is serious, the total phosphorus exceeds the standard, and the water body is in a state of eutrophication. The UAV-based hyperspectral remote sensing technique provides a cost-effective method for inland water monitoring at a local scale with high accuracy. Full article

Remote-sensing ocean colour studies have already been used to determine coastal water quality, coastal biodiversity, and nutrient availability. In recent years, Unmanned Aerial Vehicles (UAVs) equipped with multispectral sensors, originally designed for agriculture applications, have also enabled water-quality studies of coastal waters. However, since the sea surface is constantly changing, commonly used photogrammetric methods fail when applied to UAV images captured over water areas. In this work, we evaluate the applicability of a five-band multispectral sensor mounted on a UAV to derive scientifically valuable water parameters such as chlorophyll-a (Chl-a) concentration and total suspended solids (TSS), including a new Python workflow for the manual generation of an orthomosaic in aquatic areas exclusively based on the sensor’s metadata. We show water-quality details in two different sites along the Maltese coastline on the centimetre-scale, improving the existing approximations that are available for the region through Sentinel-3 OLCI imagery at a much lower spatial resolution of 300 m. The Chl-a and TSS values derived for the studied regions were within the expected ranges and varied between 0 to 3 mg/m³ and 10 to 20 mg/m³, respectively. Spectral comparisons were also carried out along with some statistics calculations such as RMSE, MAE, or bias in order to validate the obtained results. Full article

Estimates of migratory waterbirds population provide the essential scientific basis to guide the conservation of coastal wetlands, which are heavily modified and threatened by economic development. New equipment and technology have been increasingly introduced in protected areas to expand the monitoring efforts, among which video surveillance and other unmanned devices are widely used in coastal wetlands. However, the massive amount of video records brings the dual challenge of storage and analysis. Manual analysis methods are time-consuming and error-prone, representing a significant bottleneck to rapid data processing and dissemination and application of results. Recently, video processing with deep learning has emerged as a solution, but its ability to accurately identify and count waterbirds across habitat types (e.g., mudflat, saltmarsh, and open water) is untested in coastal environments. In this study, we developed a two-step automatic waterbird monitoring framework. The first step involves automatic video segmentation, selection, processing, and mosaicking video footages into panorama images covering the entire monitoring area, which are subjected to the second step of counting and density estimation using a depth density estimation network (DDE). We tested the effectiveness and performance of the framework in Tiaozini, Jiangsu Province, China, which is a restored wetland, providing key high-tide roosting ground for migratory waterbirds in the East Asian–Australasian flyway. The results showed that our approach achieved an accuracy of 85.59%, outperforming many other popular deep learning algorithms. Furthermore, the standard error of our model was very small (se = 0.0004), suggesting the high stability of the method. The framework is computing effective—it takes about one minute to process a theme covering the entire site using a high-performance desktop computer. These results demonstrate that our framework can extract ecologically meaningful data and information from video surveillance footages accurately to assist biodiversity monitoring, fulfilling the gap in the efficient use of existing monitoring equipment deployed in protected areas. Full article

The interferometric synthetic aperture radar (InSAR) data set, acquired by the TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurement) mission (TDM), represents a unique data source to derive geo-information products at a global scale. The complete Earth’s landmasses have been surveyed at least twice during the mission bistatic operation, which started at the end of 2010. Examples of the delivered global products are the TanDEM-X digital elevation model (DEM) (at a final independent posting of 12 m × 12 m) or the TanDEM-X global Forest/Non-Forest (FNF) map. The need for a reliable water product from TanDEM-X data was dictated by the limited accuracy and difficulty of use of the TDX Water Indication Mask (WAM), delivered as by-product of the global DEM, which jeopardizes its use for scientific applications, as well. Similarly as it has been done for the generation of the FNF map; in this work, we utilize the global data set of TanDEM-X quicklook images at 50 m × 50 m resolution, acquired between 2011 and 2016, to derive a new global water body layer (WBL), covering a range from −60${}^{\circ }$ to +90${}^{\circ }$ latitudes. The bistatic interferometric coherence is used as the primary input feature for performing water detection. We classify water surfaces in single TanDEM-X images, by considering the system’s geometric configuration and exploiting a watershed-based segmentation algorithm. Subsequently, single overlapping acquisitions are mosaicked together in a two-step logically weighting process to derive the global TDM WBL product, which comprises a binary averaged water/non-water layer as well as a permanent/temporary water indication layer. The accuracy of the new TDM WBL has been assessed over Europe, through a comparison with the Copernicus water and wetness layer, provided by the European Space Agency (ESA), at a 20 m × 20 m resolution. The F-score ranges from 83%, when considering all geocells (of 1${}^{\circ }$ latitudes × 1${}^{\circ }$ longitudes) over Europe, up to 93%, when considering only the geocells with a water content higher than 1%. At global scale, the quality of the product has been evaluated, by intercomparison, with other existing global water maps, resulting in an overall agreement that often exceeds 85% (F-score) when the content in the geocell is higher than 1%. The global TDM WBL presented in this study will be made available to the scientific community for free download and usage. Full article

An automatic custom-made procedure is developed to identify macroplastic debris loads in coastal and marine environment, through hyperspectral imaging from unmanned aerial vehicles (UAVs). Results obtained during a remote-sensing field campaign carried out in the seashore of Sassari (Sardinia, Italy) are presented. A push-broom-sensor-based spectral device, carried onboard a DJI Matrice 600 drone, was employed for the acquisition of spectral data in the range 900−1700 nm. The hyperspectral platform was realized by assembling commercial devices, whereas algorithms for mosaicking, post-flight georeferencing, and orthorectification of the acquired images were developed in-house. Generation of the hyperspectral cube was based on mosaicking visible-spectrum images acquired synchronously with the hyperspectral lines, by performing correlation-based registration and applying the same translations, rotations, and scale changes to the hyperspectral data. Plastics detection was based on statistically relevant feature selection and Linear Discriminant Analysis, trained on a manually labeled sample. The results obtained from the inspection of either the beach site or the sea water facing the beach clearly show the successful separate identification of polyethylene (PE) and polyethylene terephthalate (PET) objects through the post-processing data treatment based on the developed classifier algorithm. As a further implementation of the procedure described, direct real-time processing, by an embedded computer carried onboard the drone, permitted the immediate plastics identification (and visual inspection in synchronized images) during the UAV survey, as documented by short video sequences provided in this research paper. Full article

Evaluation of river basins requires land-use and land-cover (LULC) change detection to determine hydrological and ecological conditions for sustainable use of their resources. This study assessed LULC changes over 28 years (1990–2018) in the Wami–Ruvu Basin, located in Tanzania, Africa. Six pairs of images acquired using Landsat 5 TM and 8 OLI sensors in 1990 and 2018, respectively, were mosaicked into a single composite image of the basin. A supervised classification using the Neural Network classifier and training data was used to create LULC maps for 1990 and 2018, and targeted the following eight classes of agriculture, forest, grassland, bushland, built-up, bare soil, water, and wetland. The results show that over the past three decades, water and wetland areas have decreased by 0.3%, forest areas by 15.4%, and grassland by 6.7%, while agricultural, bushland, bare soil, and the built-up areas have increased by 11.6%, 8.2%, 1.6%, and 0.8%, respectively. LULC transformations were assessed with water discharge, precipitation, and temperature, and the population from 1990 to 2018. The results revealed decreases in precipitation, water discharge by 4130 m³, temperature rise by 1 °C, and an increase in population from 5.4 to 10 million. For proper management of water-resources, we propose three strategies for water-use efficiency-techniques, a review legal frameworks, and time-based LULC monitoring. This study provides a reference for water resources sustainability for other countries with basins threatened by LULC changes. Full article

With the growing concerns of water quality related to tile drainage in agricultural lands, developing an efficient and cost-effective method of mapping tile drainage is essential. This research aimed to establish mapping of tile drainage systems in agricultural fields using optical and radiometric thermal sensors mounted on Unmanned Aerial System (UAS). The overarching hypothesis is that in a tile-drained land, spatial distribution of soil water content is affected by tile lines, therefore, contrasting soil temperature signals exist between areas along the tile lines and between the tile lines. Designated flights were conducted to assess the effectiveness of the UAS under various conditions such as rainfall, crop cover, crop maturity and time of the day. Image correction, mosaicking, image enhancements and map production were conducted using Agisoft and ENVI image analysis software. The results showed intermediate growth stage of soybean plants and rainfall helped delineating tile lines. In-situ soil temperature measurements revealed appropriate time of the day (14:00 to 18:00 h) for thermal image detection of the tile lines. The role of soil moisture and plant cover is not resolved, thus, further refinement of the approach considering these factors is necessary to develop efficient mapping techniques of tile drainage using UAS thermal and optical sensors. Full article

Instance segmentation is the state-of-the-art in object detection, and there are numerous applications in remote sensing data where these algorithms can produce significant results. Nevertheless, one of the main problems is that most algorithms use Red, Green, and Blue (RGB) images, whereas Satellite images often present more channels that can be crucial to improve performance. Therefore, the present work brings three contributions: (a) conversion system from ground truth polygon data into the Creating Common Object in Context (COCO) annotation format; (b) Detectron2 software source code adaptation and application on multi-channel imagery; and (c) large scene image mosaicking. We applied the procedure in a Center Pivot Irrigation System (CPIS) dataset with ground truth produced by the Brazilian National Water Agency (ANA) and Landsat-8 Operational Land Imager (OLI) imagery (7 channels with 30-m resolution). Center pivots are a modern irrigation system technique with massive growth potential in Brazil and other world areas. The round shapes with different textures, colors, and spectral behaviors make it appropriate to use Deep Learning instance segmentation. We trained the model using 512 × 512-pixel sized patches using seven different backbone structures (ResNet50- Feature Pyramid Network (FPN), Resnet50-DC5, ResNet50-C4, Resnet101-FPN, Resnet101-DC5, ResNet101-FPN, and ResNeXt101-FPN). The model evaluation used standard COCO metrics (Average Precision (AP), AP₅₀, AP₇₅, AP_small, AP_medium, and AR₁₀₀). ResNeXt101-FPN had the best results, with a 3% advantage over the second-best model (ResNet101-FPN). We also compared the ResNeXt101-FPN model in the seven-channel and RGB imagery, where the multi-channel model had a 3% advantage, demonstrating great improvement using a larger number of channels. This research is also the first with a mosaicking algorithm using instance segmentation models, where we tested in a 1536 × 1536-pixel image using a non-max suppression sorted by area method. The proposed methodology is innovative and suitable for many other remote sensing problems and medical imagery that often present more channels. Full article

The spaceborne mission TanDEM-X successfully acquired and processed a global Digital Elevation Model (DEM) from interferometric bistatic SAR data at X band. The product has been delivered in 2016 and is characterized by an unprecedented vertical accuracy. It is provided at 12 m, 30 m, and 90 m sampling and can be accessed by the scientific community via a standard announcement of opportunity process and the submission of a scientific proposal. The 90 m version is freely available for scientific purposes. The DEM is unedited, which means that it is the pure result of the interferometric SAR processing and subsequent mosaicking. Residual gaps, resulting, e.g., from unprocessable data, are still present and water surfaces appear noisy. This paper reports on the algorithms developed at DLR’s Microwaves and Radar Institute for a fully automatic editing of the global TanDEM-X DEM comprising gap filling and water editing. The result is a new global gap-free DEM product at 30 m sampling, which can be used for a large variety of scientific applications. It also serves as a reference for processing the upcoming TanDEM-X Change DEM layer. Full article