Search Results (29)

Volatile halogenated hydrocarbons (VHHs) are critical air toxic pollutants, with some ozone-depleting substances (ODSs) strictly regulated by the Montreal Protocol. However, current understanding of the pollution characteristics, sources, and health risks of atmospheric VHHs in Southwest China remains insufficient. This study performed field observations of atmospheric VHHs in summer in Mianyang, a medium-sized industrial city in the Sichuan Basin. Freon-12 (563 ± 20 ppt) and Freon-11 (264 ± 15 ppt) were the most abundant chlorofluorocarbons (CFCs); chloromethane (785 ± 261 ppt) and methylene chloride (563 ± 505 ppt) dominated among VSLSs. The mean concentration of regulated ODSs (1037 ± 33 pptv) was notably lower than unregulated very short-lived chlorinated substances (1887 ± 745 pptv), reflecting effective ODSs phase-out locally, yet enhancements relative to Northern Hemisphere background implied potential leakage from residual tanks. Methylene chloride and trichloroethylene concentrations exceeded global background levels by over 10 times, indicating strong anthropogenic industrial influences. Phased-out CFCs displayed negligible diurnal variation due to stringent emission controls, whereas unregulated VSLSs exhibited a distinct U-shaped diurnal cycle, with peaks driven by morning boundary layer dynamics and evening accumulation. Positive matrix factorization revealed that industrial sources, including electronic solvents (28.6%), industrial processes (27.8%), and solvent usage (23.7%), accounted for 80.1% of total VHHs. The total carcinogenic risk (2.3 × 10⁻⁵) surpassed the acceptable threshold (1 × 10⁻⁶), dominated by 1,2-dichloroethane, chloroform, carbon tetrachloride, and 1,2-dichloropropane. All individual compounds exhibited mean hazard quotients (HQs) below the non-carcinogenic risk threshold. The cumulative hazard index reached 1.5, suggesting combined non-carcinogenic risks to the local population. These results support VHHs health risk management and ODSs control in Southwest Chinese industrial cities. Full article

With the rapid development of urbanization, municipal waste incineration (MWI) has become the primary method of waste disposal in urban areas, leading to growing concerns about volatile organic compounds (VOC) emissions. This study conducted full-process VOC field sampling at a representative MWI plant in China to investigate the emission characteristics and removal efficiencies of air pollution control devices (APCDs). A total of 59 VOC species were identified in the flue gas, including 5 alkanes/alkenes, 14 aromatics, 8 oxygenated-VOCs, and 32 halogenated hydrocarbons. The activated carbon injection combined with fabric filters and wet desulfurization tower demonstrated varying removal efficiencies across VOC groups, with synergistic removal efficiencies being ranked as follows: alkanes/alkenes (90.9%) > aromatics (87.0%) > halogenated hydrocarbons (61.3%) > O-VOCs (42.2%). The total VOC removal efficiency reached 77.5%. The VOCs emission factor of the MWI plant was calculated as (1.9 ± 0.6) × 10³ ng/g-waste, which would rise to (8.4 ± 2.1) × 10³ ng/g-waste in the absence of APCDs. This indicates that the current APCD system reduces VOC emissions by approximately 6.52 × 10⁴ g annually from this MWI plant, highlighting the crucial role of multistage APCDs in mitigating VOC pollution. Full article

Seaweed is a sustainable ingredient that has been suggested to improve the nutritional aspects as well as the sensory properties of different food products. The objective of this study was to evaluate the flavor properties of extracts from brown seaweed (Ascophyllum nodosum) and sugar kelp (Saccharina latissimi) obtained at different temperatures. These varieties commonly grow in the Atlantic Ocean. The seaweed samples were extracted using water at three different temperatures (50 °C, 70 °C, and 90 °C). The volatile fraction of the extracts was extracted with headspace solid-phase microextraction and analyzed by gas chromatography–mass spectrometry. The headspace chemical composition varies significantly among seaweed extracts and at different extraction temperatures. Major classes of identified compounds were aldehydes, ketones, alcohols, hydrocarbons, and halogenated compounds. Extracts were also evaluated using temporal check-all-that-apply (with 84 untrained participants). The different temperatures had minimal impact on the flavour properties of the brown seaweed samples, but the extraction temperature did influence the properties of the sugar kelp samples. Increasing the extraction temperature seemed to lead to an increase in bitterness, savouriness, and earthy flavor, but future studies are needed to confirm this finding. This study continues the exploration of the flavor properties of seaweeds and identifies the dynamic flavor profile of brown seaweed and sugar kelp under different extraction conditions. Full article

To characterize the temporal variation in and source contribution of volatile organic compounds (VOCs) in a polymer industrial park, a two-year offline monitoring campaign (2018–2019) at Shangyu Industrial Park in the Yangtze River Delta was conducted. The study quantified the VOCs composition, seasonal variation, and ozone formation potential (OFP), with source apportionment performed using the Positive Matrix Factorization (PMF) model. During the observation period, the average concentration of total VOCs in 2019 was 286.1 ppb, showing a 22.6% reduction compared to that in 2018. Seasonal analysis revealed decreases in the total VOCs concentration by 41.8%, 38.4%, and 6.1% during spring, summer and winter, respectively, while an increase of 13.8% was observed in autumn, primarily attributed to industrial restructuring in the second half of 2019. Notable reductions were observed in specific VOCs components: oxygen-containing volatile organic compounds (OVOCs), alkane, halogenated hydrocarbon, alkene, and alkyne decreased by 34.5%, 27.9%, 26.3%, 24.6%, and 20.4%, respectively. The average OFP in 2019 was 2402.0 μg/m³, representing a 1.8% reduction from 2018. Contributions to total OFP from alkane, OVOCs, alkyne, and alkene decreased by 32.9%, 26.0%, 20.7%, and 15.0%, respectively, while halogenated hydrocarbons and aromatic hydrocarbons increased by 50.1% and 7.0%. PMF analysis identified four major VOCs sources: industrial production (44.9%), biomass combustion (17.8%), vehicle exhaust (11.0%), and solvent usage (26.3%). From 2018 to 2019, contributions from vehicle exhaust and solvent usage increased by 4.8% and 5.9%, respectively, while industrial production and biomass combustion decreased by 10.5% and 0.3%. Full article

This study conducted an on-site monitoring of 28 representative coating enterprises in Hangzhou City and successfully constructed the localized component spectrum of volatile organic compounds (VOC) emissions from the industrial coating industry. These coating enterprises, which have a total VOC emission of approximately 7113 tons, accounting for 17.6% of the city’s total industrial VOC emissions, primarily emit benzene derivatives, ketones, esters, and halogenated hydrocarbons. Using the maximum incremental reactivity (MIR) method, the ozone formation potential (OFP) was calculated based on the annual VOC emissions from the industry. The OFP values for the different types of enterprises had significant variations, with the general equipment manufacturing, metal products, and electrical machinery industries exhibiting the highest contributions. Research results indicate that differentiated management approaches are needed for specific emission characteristics in each sub-industry, including promoting the use of water-based paints and clean production technologies, adopting efficient volatile organic compound treatment technologies, and establishing stricter emission standards with regular monitoring of highly reactive compounds. These measures are crucial for achieving more effective environmental management and continuous improvement of air quality. Full article

Biogas usually contains volatile organic compounds such as terpenes, siloxanes, halogenated hydrocarbons, ketones, alcohols, furans and esters whose presence in the biogas is highly dependent on the feedstock. These trace components can affect the integrity of the materials they come into contact with, e.g., equipment, pipelines and engines, and their presence in the gas may pose health, safety and environmental risks. Understanding the composition of gases is a prerequisite to ensure the correct function of gas infrastructure, appliances and vehicles. This study examined how volatile organic compound (VOC) content in biogas varies depending on the feedstock and evaluated the efficiency of different upgrading processes in removing VOCs. The data, primarily collected in Sweden, include biogases produced in digesters and landfills. The selection of VOCs included in this study was based on extensive analysis of samples collected from numerous biogas and biomethane industrial facilities over an extended period, providing a comprehensive overview of VOC composition. The conducted research is intended to serve as a basis for more systematic studies on the influence of process parameters and feedstock composition on the formation of VOCs. The data have multiple potential uses, including predicting which VOCs would be found in biomethane for a given feedstock and upgrading techniques. Additionally, these data can also be used in standardization discussions to assess the plausibility of the proposed limit values and the need to regulate additional compounds. Full article

The development of inhaled anesthetics (IAs) has a rich history dating back many centuries. In modern times they have played a pivotal role in anesthesia and critical care by allowing deep sedation during periods of critical illness and surgery. In addition to their sedating effects, they have many systemic effects allowing for therapy beyond surgical anesthesia. In this narrative review we chronicle the evolution of IAs, from early volatile agents such as ether to the contemporary use of halogenated hydrocarbons. This is followed by a discussion of the mechanisms of action of these agents which primarily involve the modulation of lipid membrane properties and ion channel activity. IAs’ systemic effects are also examined, including their effects on the cardiovascular, respiratory, hepatic, renal and nervous systems. We discuss of the role of IAs in treating systemic disease processes including ischemic stroke, delayed cerebral ischemia, status epilepticus, status asthmaticus, myocardial ischemia, and intensive care sedation. We conclude with a review of the practical and logistical challenges of utilizing IAs outside the operating room as well as directions for future research. This review highlights the expanding clinical utility of IAs and their evolving role in the management of a diverse range of disease processes, offering new avenues for therapeutic exploration beyond anesthesia. Full article

Increased levels and detrimental effects of volatile organic compounds (VOCs) on air quality and human health have become an important issue in the environmental field. Benzene is classified as one of the most hazardous air pollutants among non-halogenated aromatic hydrocarbons with toxic, carcinogenic, and mutagenic effects. Various technologies have been applied to decrease harmful emissions from various sources such as petrochemistry, steel manufacturing, organic chemical, paint, adhesive, and pharmaceutical production, vehicle exhausts, etc. Catalytic oxidation to CO₂ and water is an attractive approach to VOC removal due to high efficiency, low energy consumption, and the absence of secondary pollution. However, catalytic oxidation of the benzene molecule is a great challenge because of the extraordinary stability of its six-membered ring structure. Developing highly efficient catalysts is of primary importance for effective elimination of benzene at low temperatures. This review aims to summarize and discuss some recent advances in catalyst composition and preparation strategies. Advantages and disadvantages of using noble metal-based catalysts and transition metal oxide-based catalysts are addressed. Effects of some crucial factors such as catalyst support nature, metal particle size, electronic state of active metal, redox properties, reactivity of lattice oxygen and surface adsorbed oxygen on benzene removal are explored. Thorough elucidation of reaction mechanisms in benzene oxidation is a prerequisite to develop efficient catalysts. Benzene oxidation mechanisms are analyzed based on in situ catalyst characterization, reaction kinetics, and theoretical simulation calculations. Considering the role of oxygen vacancies in improving catalytic performance, attention is given to oxygen defect engineering. Catalyst deactivation due to coexistence of water vapor and other pollutants, e.g., sulfur compounds, is discussed. Future research directions for rational design of catalysts for complete benzene oxidation are provided. Full article

To fill a research gap on firefighter exposures and breast cancer risk, and guide exposure reduction, we aimed to identify firefighter occupational exposures linked to breast cancer. We conducted a systematic search and review to identify firefighter chemical exposures and then identified the subset that was associated with breast cancer. To do this, we compared the firefighter exposures with chemicals that have been shown to increase breast cancer risk in epidemiological studies or increase mammary gland tumors in experimental toxicology studies. For each exposure, we assigned a strength of evidence for the association with firefighter occupation and for the association with breast cancer risk. We identified twelve chemicals or chemical groups that were both linked to breast cancer and were firefighter occupational exposures, including polycyclic aromatic hydrocarbons, volatile aromatics, per- and polyfluoroalkyl substances, persistent organohalogens, and halogenated organophosphate flame retardants. Many of these were found at elevated levels in firefighting environments and were statistically significantly higher in firefighters after firefighting or when compared to the general population. Common exposure sources included combustion byproducts, diesel fuel and exhaust, firefighting foams, and flame retardants. Our findings highlight breast-cancer-related chemical exposures in the firefighting profession to guide equitable worker’s compensation policies and exposure reduction. Full article

Biochar (BC) is often used as an additive in anaerobic digestion (AD) to increase yield and/or to stabilise the process when the manure content is increased. Unfortunately, BC is rarely described in detail in terms of its raw material sources, production processes, and structural, physical and chemical properties to allow correlation with its effects on AD. It is an open question whether microorganisms from AD can penetrate into different biochar pore types, depending on their wood origin. In this paper, we describe the preparation (temperatures, treatment times, yields) and characterisation shrinkage, density, pore sizes, pore size distribution, specific surface area, ash, volatiles, fixed carbon, elemental composition, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), benzene, toluene, ethyl-toluene, xylene (BTEX) and volatile halogenated hydrocarbons (VHH) of BC cubes of Scots pine (Pinus sylvestris) and common beech (Fagus sylvatica) powder made from this BC in addition to commercial charcoal powder. The pore size distribution determined by mercury porosimetry differs from that determined by 3D-reflected light microscopy. After incubating BC cubes in AD, the cubes were mechanically cleaned and cut into two pieces. Microorganisms were detected inside the cubes by fluorescence microscopy. Particle size and wood source determine the influence of BC on AD. Full article

In recent years, commercial air transport has increased considerably. However, the compositions and source profiles of volatile organic compounds (VOCs) emitted from aircraft are still not clear. In this study, the characteristics of VOCs (including oxygenated VOCs (OVOCs)) emitted from airport sources were measured at Shenzhen Bao’an International Airport. The results showed that the compositions and proportions of VOC species showed significant differences as the aircraft operating state changed. OVOCs were the dominant species and accounted for 63.17%, 58.44%, and 51.60% of the total VOC mass concentration during the taxiing, approach, and take-off stages. Propionaldehyde and acetone were the main OVOCs, and dichloromethane and 1,2-dichloroethane were the main halohydrocarbons. Propane had the highest proportion among all alkanes, while toluene and benzene were the predominant aromatic hydrocarbons. Compared with the source profiles of VOCs from construction machinery, the proportions of halogenated hydrocarbons and alkanes emitted from aircraft were significantly higher, as were those of propionaldehyde and acetone. OVOCs were still the dominant VOC species in aircraft emissions, and their calculated ozone formation potential (OFP) was much higher than that of other VOC species at all stages of aircraft operations. Acetone, propionaldehyde, formaldehyde, acetaldehyde, and ethylene were the greatest contributors to ozone production. This study comprehensively measured the distribution characteristics of VOCs, and its results will aid in the construction of a source profile inventory of VOCs emitted from aircraft sources in real atmospheric environments. Full article

As “fuel” for atmospheric photochemical reactions, volatile organic compounds (VOCs) play a key role in the secondary generation of ozone (O₃) and fine particulate matter (PM_2.5, an aerodynamic diameter ≤ 2.5 μm). To determine the characteristics of VOCs in a high-level ozone period, comprehensive monitoring of O₃ and its precursors (VOCs and NOx) was continuously conducted in an industrial area in Shanghai from 18 August to 30 September 2021. During the observation period, the average concentration of VOCs was 47.33 ppb, and alkanes (19.64 ppb) accounted for the highest proportion of TVOCs, followed by oxygenated volatile organic compounds (OVOCs) (13.61 ppb), alkenes (6.92 ppb), aromatics (4.65 ppb), halogenated hydrocarbons (1.60 ppb), and alkynes (0.91 ppb). Alkenes were the predominant components that contributed to the ozone formation potential (OFP), while aromatics such as xylene, toluene, and ethylbenzene contributed the most to the secondary organic aerosol production potential (SOAFP). During the study period, O₃, NOx, and VOCs showed significant diurnal variations. Industrial processes were the main source of VOCs, and the second largest source of VOCs was vehicle exhaust. While the largest contribution to OFP was from vehicle exhaust, the second largest contribution was from liquid petroleum gas (LPG). High potential source contribution function (PSCF) values were observed in western and southeastern areas near the sampling sites. The results of a health risk evaluation showed that the Hazard Index was less than 1 and there was no non-carcinogenic risk, but 1,3-butadiene, benzene, chloroform, 1,2-dibromoethane, and carbon tetrachloride pose a potential carcinogenic risk to the population. Full article

The chemical complexity and toxicity of volatile organic compounds (VOCs) are primarily encountered through intensive anthropogenic emissions in suburban areas. Here, pollution characteristics, impacts on secondary pollution formation, and health risks were investigated through continuous in-field measurements from 1–30 June 2020 in suburban Nanjing, adjacent to national petrochemical industrial parks in China. On average, the total VOCs concentration was 34.47 ± 16.08 ppb, which was comprised mostly by alkanes (41.8%) and halogenated hydrocarbons (29.4%). In contrast, aromatics (17.4%) dominated the ozone formation potential (OFP) and secondary organic aerosol formation potential (SOAFP) with 59.6% and 58.3%, respectively. Approximately 63.5% of VOCs were emitted from the petrochemical industry and from solvent usage based on source apportionment results, followed by biogenic emissions of 22.3% and vehicle emissions of 14.2%. Of the observed 46 VOC species, hexachlorobutadiene, dibromoethane, butadiene, tetrachloroethane, and vinyl chloride contributed as high as 98.8% of total carcinogenic risk, a large fraction of which was ascribed to the high-level emissions during ozone pollution episodes and nighttime. Therefore, the mitigation of VOC emissions from petrochemical industries would be an effective way to reduce secondary pollution and potential health risks in conurbation areas. Full article

The surface atmospheric O₃ concentration in Kunming shows a significant upward trend, with high values mainly occurring in March–May. Volatile organic compounds (VOCs) are one of the most important precursors of O₃. However, the sources of VOCs are complex and difficult to identify. In order to understand the pollution levels, the spatial distribution characteristics, and possible sources of VOCs, we conducted simultaneous offline sampling at representative sites in six different functional areas of Kunming using SUMMA canisters for one week. The VOC samples were analyzed via GC/MS. The VOC data were analyzed (using the feature ratio method, ozone formation potential (OFP), and Positive Matrix Factorization (PMF) model). Some important conclusions were drawn. Firstly, VOCs during the spring in Kunming were mainly derived from oxygenated VOCs, aromatic hydrocarbons, and halogenated hydrocarbons, with significant spatial differences. Secondly, we found that the potential for atmospheric ozone formation is higher in Kunming for aromatic hydrocarbons and oxygenated VOCs. Finally, the results of the Positive Matrix Factorization model (PMF) showed that Kunming’s ambient atmospheric VOCs mainly originate from anthropogenic source emissions. These conclusions can provide useful reference information for O₃ pollution control in Kunming. Full article

This review examines the current state of knowledge regarding the effectiveness of different dietary ruminant enteric methane mitigation strategies and their modes of action together with the issues discussed regarding the potential harms/risks and applicability of such strategies. By investigating these strategies, we can enhance our understanding of the mechanisms by which they influence methane production and identify promising approaches for sustainable mitigation of methane emissions. Out of all nutritional strategies, the use of 3-nitrooxypropanol, red seaweed, tannins, saponins, essential oils, nitrates, and sulfates demonstrates the potential to reduce emissions and receives a lot of attention from the scientific community. The use of certain additives as pure compounds is challenging under certain conditions, such as pasture-based systems, so the potential use of forages with sufficient amounts of plant secondary metabolites is also explored. Additionally, improved forage quality (maturity and nutrient composition) might help to further reduce emissions. Red seaweed, although proven to be very effective in reducing emissions, raises some questions regarding the volatility of the main active compound, bromoform, and challenges regarding the cultivation of the seaweed. Other relatively new methods of mitigation, such as the use of cyanogenic glycosides, are also discussed in this article. Together with nitrates, cyanogenic glycosides pose serious risks to animal health, but research has proven their efficacy and safety when control measures are taken. Furthermore, the risks of nitrate use can be minimized by using probiotics. Some of the discussed strategies, namely monensin or halogenated hydrocarbons (as pure compounds), demonstrate efficacy but are unlikely to be implemented widely because of legal restrictions. Full article