Search Results (347)

Unmanned platforms such as unmanned aerial vehicles, unmanned ground vehicles, and autonomous underwater vehicles often face challenges of data, device, and model heterogeneity when performing collaborative data processing tasks. Existing research does not simultaneously address issues from these three aspects. To address this issue, this study designs an unmanned platform cluster architecture inspired by the cloud-edge-end model. This architecture integrates federated learning for privacy protection, leverages the advantages of distributed model training, and utilizes edge computing’s near-source data processing capabilities. Additionally, this paper proposes a federated edge intelligence method (DSIA-FEI), which comprises two key components. Based on traditional federated learning, a data sharing mechanism is introduced, in which data is extracted from edge-side platforms and placed into a data sharing platform to form a public dataset. At the beginning of model training, random sampling is conducted from the public dataset and distributed to each unmanned platform, so as to mitigate the impact of data distribution heterogeneity and class imbalance during collaborative data processing in unmanned platforms. Moreover, an intelligent model aggregation strategy based on similarity measurement and loss gradient is developed. This strategy maps heterogeneous model parameters to a unified space via hierarchical parameter alignment, and evaluates the similarity between local and global models of edge devices in real-time, along with the loss gradient, to select the optimal model for global aggregation, reducing the influence of device and model heterogeneity on cooperative learning of unmanned platform swarms. This study carried out extensive validation on multiple datasets, and the experimental results showed that the accuracy of the DSIA-FEI proposed in this paper reaches 0.91, 0.91, 0.88, and 0.87 on the FEMNIST, FEAIR, EuroSAT, and RSSCN7 datasets, respectively, which is more than 10% higher than the baseline method. In addition, the number of communication rounds is reduced by more than 40%, which is better than the existing mainstream methods, and the effectiveness of the proposed method is verified. Full article

Unmanned aerial vehicles (UAVs) have emerged as a promising platform for integrated sensing and communication (ISAC) due to their mobility and deployment flexibility. By adaptively adjusting their flight trajectories, UAVs can maintain favorable line-of-sight (LoS) communication links and sensing angles, thus enhancing overall system performance in dynamic and complex environments. However, ensuring physical layer security (PLS) in such UAV-assisted ISAC systems remains a significant challenge, particularly in the presence of mobile users and potential eavesdroppers. This manuscript proposes a joint optimization framework that simultaneously designs robust transmit beamforming and UAV trajectories to secure downlink communication for multiple ground users. At each time slot, the UAV predicts user positions and maximizes the secrecy sum-rate, subject to constraints on total transmit power, multi-target sensing quality, and UAV mobility. To tackle this non-convex problem, we develop an efficient optimization algorithm based on successive convex approximation (SCA) and constrained optimization by linear approximations (COBYLA). Numerical simulations validate that the proposed framework effectively enhances the secrecy performance while maintaining high-quality sensing, achieving near-optimal performance under realistic system constraints. Full article

This research focuses on enhancing cooperative localization for heterogeneous mobile robots composed of a quadcopter and an unmanned ground vehicle. The study employs sensor fusion techniques, particularly the Extended Kalman Filter, to fuse data from various sensors, including GPSs, IMUs, and cameras. By integrating these sensors and optimizing fusion strategies, the research aims to improve the precision and reliability of cooperative localization in complex and dynamic environments. The primary objective is to develop a practical framework for cooperative localization that addresses the challenges posed by the differences in mobility and sensing capabilities among heterogeneous robots. Sensor fusion is used to compensate for the limitations of individual sensors, providing more accurate and robust localization results. Moreover, a comparative analysis of different sensor combinations and fusion strategies helps to identify the optimal configuration for each robot. This research focuses on the improvement of cooperative localization, path planning, and collaborative tasks for heterogeneous robots. The findings have broad applications in fields such as autonomous transportation, agricultural operation, and disaster response, where the cooperation of diverse robotic platforms is crucial for mission success. Full article

In recent years, UAV (unmanned aerial vehicle)-UGV (unmanned ground vehicle) collaborative systems have played a crucial role in emergency disaster rescue. To improve rescue efficiency, heterogeneous network and task chain methods are introduced to cooperatively develop rescue sequences within a short time for collaborative systems. However, current methods also overlook resource overload for heterogeneous units and limit planning to a single task chain in cross-platform rescue scenarios, resulting in low robustness and limited flexibility. To this end, this paper proposes Gemini, a cascaded dual-agent deep reinforcement learning (DRL) framework based on the Heterogeneous Service Network (HSN) for multiple task chains planning in UAV-UGV collaboration. Specifically, this framework comprises a chain selection agent and a resource allocation agent: The chain selection agent plans paths for task chains, and the resource allocation agent distributes platform loads along generated paths. For each mission, a well-trained Gemini can not only allocate resources in load balancing but also plan multiple task chains simultaneously, which enhances the robustness in cross-platform rescue. Simulation results show that Gemini can increase rescue effectiveness by approximately 60% and improve load balancing by approximately 80%, compared to the baseline algorithm. Additionally, Gemini’s performance is stable and better than the baseline in various disaster scenarios, which verifies its generalization. Full article

Ensuring reliable communication in remote or disaster-affected areas is a technical challenge due to unplanned deployment and mobilization, meaning placement difficulties and high operation costs of conventional telecommunications infrastructures. To address this problem, unmanned aerial vehicles (UAVs) have emerged as an excellent alternative to provide quick connectivity in remote or disaster-affected regions at a reasonable cost. However, the limited battery autonomy of UAVs restricts their flight service time. This paper proposes a communication system based on a tethered UAV (T-UAV) capable of continuous operation through a wired power network connected to a ground station. The communications system is based on low-cost devices, such as Raspberry Pi platforms, and offers wireless IP telephony services, providing high-quality and reliable communication. Experimental tests assessed power consumption, UAV stability, and data transmission performance. Our results prove that the T-UAV, based on a quadcopter drone, operates stably at 16 V and 20 A, ensuring consistent VoIP communications at a height of 10 m with low latency. These experimental findings underscore the potential of T-UAVs as cost-effective alternatives for extending or providing communication networks in remote regions, emergency scenarios, or underserved areas. Full article

As urban populations expand and congestion intensifies, traditional ground transportation struggles to satisfy escalating mobility demands. Unmanned Electric Vertical Take-Off and Landing (eVTOL) aircraft, as a key enabler of Urban Air Mobility (UAM), leverage low-altitude airspace to alleviate ground traffic while offering environmentally sustainable solutions. However, supporting high bandwidth, real-time video applications, such as Virtual Reality (VR), Augmented Reality (AR), and 360° streaming, remains a major challenge, particularly within bandwidth-constrained metropolitan regions. This study proposes a novel Unmanned Aerial Vehicle (UAV)-enabled video streaming architecture that integrates 6G wireless technologies with intelligent routing strategies across cooperative airborne nodes, including unmanned eVTOLs and High-Altitude Platform Systems (HAPS). By relaying video data from low-congestion ground base stations to high-demand urban zones via autonomous aerial relays, the proposed system enhances spectrum utilization and improves streaming stability. Simulation results validate the framework’s capability to support immersive media applications in next-generation autonomous air mobility systems, aligning with the vision of scalable, resilient 3D transportation infrastructure. Full article

SmallUnmanned Aerial Systems (sUAS) have seen rapid adoption thanks to advances in endurance, communications, autonomy, and manufacturing costs, yet most testing remains focused on GPS-supported, above-ground operations. This study introduces new test methodologies and presents comprehensive experimental evaluations of collision tolerance, navigation, and trajectory following for commercial sUAS platforms in GPS-denied indoor environments. We also propose numerical and categorical metrics—based on established vehicle collision protocols such as the Modified Acceleration Severity Index (MASI) and Maximum Delta V (MDV)—to quantify collision resilience; for example, the tested platforms achieved an average MASI of 0.1 g, while demonstrating clear separation between the highest- and lowest-performing systems. The experimental results revealed that performance varied significantly with mission complexity, obstacle proximity, and trajectory requirements, identifying platforms best suited for subterranean or crowded indoor applications. By aggregating these metrics, users can select the optimal drone for their specific mission requirements in challenging enclosed spaces. Full article

The increasing complexity of Internet of Drones (IoD) platforms demands more accessible ways for users to interact with unmanned aerial vehicle (UAV) data systems. Traditional methods requiring technical API knowledge create barriers for non-specialist users in dynamic operational environments. To address this challenge, we propose a retrieval-augmented generation (RAG) architecture that enables natural language querying over UAV telemetry, mission, and detection data. Our approach builds a semantic retrieval index from structured application programming interface (API) documentation and uses lightweight large language models to map user queries into executable API calls validated against platform schemas. This design minimizes fine-tuning needs, adapts to evolving APIs, and ensures schema conformity for operational safety. Evaluations conducted on a curated IoD dataset show 91.3% endpoint accuracy, 87.6% parameter match rate, and 95.2% schema conformity, confirming the system’s robustness and scalability. The results demonstrate that combining retrieval-augmented semantic grounding with structured validation bridges the gap between human intent and complex UAV data access, improving usability while maintaining a practical level of operational reliability. Full article

Unmanned aerial vehicles (UAVs), owing to their flexible coverage expansion and dynamic adjustment capabilities, hold significant application potential across various fields. With the emergence of urban low-altitude air traffic dominated by UAVs, the integrated aviation information network combining UAVs and manned aircraft has evolved into a complex space–air–ground integrated Internet of Things (IoT) system. The application of 5G/6G network technologies, such as cloud computing, network function virtualization (NFV), and edge computing, has enhanced the flexibility of air traffic services based on service function chains (SFCs), while simultaneously expanding the network attack surface. Compared to traditional networks, the aviation information network integrating UAVs exhibits greater heterogeneity and demands higher service reliability. To address the failure issues of SFCs under attack, this study proposes an efficient SFC recovery method for recovery rate optimization (ERRRO) based on virtual network functions (VNFs) migration technology. The method first determines the recovery order of failed SFCs according to their recovery costs, prioritizing the restoration of SFCs with the lowest costs. Next, the migration priorities of the failed VNFs are ranked based on their neighborhood certainty, with the VNFs exhibiting the highest neighborhood certainty being migrated first. Finally, the destination nodes for migrating the failed VNFs are determined by comprehensively considering attributes such as the instantiated SFC paths, delay of physical platforms, and residual resources. Experiments demonstrate that the ERRRO performs well under networks with varying resource redundancy and different types of attacks. Compared to methods reported in the literature, the ERRRO achieves superior performance in terms of the SFC recovery rate and delay. Full article

This paper addresses inherent limitations in unmanned aerial vehicle (UAV) undercarriages hindering vertical takeoff and landing (VTOL) capabilities on uneven slopes and obstacles. Robotic landing gear (RLG) designs have been proposed to address these limitations; however, existing designs are typically limited to ground slopes of 6–15°, beyond which rollover would happen. Moreover, articulated RLG concepts come with added complexity and weight penalties due to multiple drivetrain components. Previous research has highlighted that even a minor 3-degree slope change can increase the dynamic rollover risks by 40%. Therefore, the design optimization of robotic landing gear for enhanced VTOL capabilities requires a multidisciplinary framework that integrates static analysis, dynamic simulation, and control strategies for operations on complex terrain. This paper presents a novel, hybrid, compliant, belt-driven, three-legged RLG system, supported by a multidisciplinary design optimization (MDO) methodology, aimed at achieving enhanced VTOL capabilities on uneven surfaces and moving platforms like ship decks. The proposed system design utilizes compliant mechanisms featuring a series of three-flexure hinges (3SFH), to reduce the number of articulated drivetrain components and actuators. This results in a lower system weight, improved energy efficiency, and enhanced durability, compared to earlier fully actuated, articulated, four-legged, two-jointed designs. Additionally, the compliant belt-driven actuation mitigates issues such as backlash, wear, and high maintenance, while enabling smoother torque transfer and improved vibration damping relative to earlier three-legged cable-driven four-bar link RLG systems. The use of lightweight yet strong materials—aluminum and titanium—enables the legs to bend 19 and 26.57°, respectively, without failure. An animated simulation of full-contact landing tests, performed using a proportional-derivative (PD) controller and ship deck motion input, validate the performance of the design. Simulations are performed for a VTOL UAV, with two flexible legs made of aluminum, incorporating circular flexure hinges, and a passive third one positioned at the tail. The simulation results confirm stable landings with a 2 s settling time and only 2.29° of overshoot, well within the FAA-recommended maximum roll angle of 2.9°. Compared to the single-revolute (1R) model, the implementation of the optimal 3R Pseudo-Rigid-Body Model (PRBM) further improves accuracy by achieving a maximum tip deflection error of only 1.2%. It is anticipated that the proposed hybrid design would also offer improved durability and ease of maintenance, thereby enhancing functionality and safety in comparison with existing robotic landing gear systems. Full article

Tethered drones—defined in this work as multirotor aerial platforms physically connected to a ground station via a cable—have emerged as a transformative subclass of Tethered Unmanned Aerial Vehicles (TUAVs), offering enhanced power autonomy, communication robustness, and safety through a physical ground connection. This review provides a comprehensive analysis of the current state of tethered drone systems technology, focusing on critical system components such as power delivery, data transmission, tether management, and modeling frameworks. Emphasis is placed on the tether multifunctional role—not only as a physical link but also as a sensor, actuator, and communication channel—impacting both hardware design and control strategies. By consolidating fragmented research across disciplines, this work offers a unified reference for the design, implementation, and advancement of TUAV systems, with tethered drones as their principal application. Full article

With the acceleration of agricultural intelligent transformation, deep reinforcement learning (DRL), leveraging its adaptive perception and decision-making capabilities in complex environments, has emerged as a pivotal technology in advancing the intelligent upgrade of agricultural machinery and equipment. For example, in UAV path optimization, DRL can help UAVs plan more efficient flight paths to cover more areas in less time. To enhance the systematicity and credibility of this review, this paper systematically examines the application status, key issues, and development trends of DRL in agricultural scenarios, based on the research literature from mainstream Chinese and English databases spanning from 2018 to 2024. From the perspective of algorithm–hardware synergy, the article provides an in-depth analysis of DRL’s specific applications in agricultural ground platform navigation, path planning for intelligent agricultural end-effectors, and autonomous operations of low-altitude unmanned aerial vehicles. It highlights the technical advantages of DRL by integrating typical experimental outcomes, such as improved path-tracking accuracy and optimized spraying coverage. Meanwhile, this paper identifies three major challenges facing DRL in agricultural contexts: the difficulty of dynamic path planning in unstructured environments, constraints imposed by edge computing resources on algorithmic real-time performance, and risks to policy reliability and safety under human–machine collaboration conditions. Looking forward, the DRL-driven smart transformation of agricultural machinery will focus on three key aspects: (1) The first aspect is developing a hybrid decision-making architecture based on model predictive control (MPC). This aims to enhance the strategic stability and decision-making interpretability of agricultural machinery (like unmanned tractors, harvesters, and drones) in complex and dynamic field environments. This is essential for ensuring the safe and reliable autonomous operation of machinery. (2) The second aspect is designing lightweight models that support edge-cloud collaborative deployment. This can meet the requirements of low-latency responses and low-power operation in edge computing scenarios during field operations, providing computational power for the real-time intelligent decision-making of machinery. (3) The third aspect is integrating meta-learning with self-supervised mechanisms. This helps improve the algorithm’s fast generalization ability across different crop types, climates, and geographical regions, ensuring the smart agricultural machinery system has broad adaptability and robustness and accelerating its application in various agricultural settings. This paper proposes research directions from three key dimensions-“algorithm capability enhancement, deployment architecture optimization, and generalization ability improvement”-offering theoretical references and practical pathways for the continuous evolution of intelligent agricultural equipment. Full article

Recent advancements in the unmanned aerial vehicle remote sensing field have highlighted the effectiveness of infrared sensors in detecting and tracking time-sensitive ground targets, particularly within the domain of early warning and surveillance. However, the limitations inherent in airborne infrared platforms can lead to irregular imaging and inadequate textural features. This study presents a multi-object tracking system specifically designed for weak-textured infrared targets, aimed at enhancing detection accuracy and tracking stability. Initially, improvements are made to the YOLOv10 model through the incorporation of modules such as DSA, c2f_fasterblock, and NMSFree, which collectively enhance detection accuracy and robustness for weak-textured targets. Subsequently, the detection results are employed in conjunction with GM-PHD tracking, enabling rapid and stable target tracking. The proposed methodology demonstrates a 2.3% improvement in detection accuracy and a 3.8% increase in recall when assessed using publicly available infrared tracking datasets. Notably, the key tracking metric, MOTA, achieves a value of 90.7%, while the IDF1 score reaches 94.6%. The findings from the experiments indicate that the proposed algorithm surpasses current methodologies regarding effectiveness, accuracy, and robustness in the context of infrared multi-target tracking tasks, thereby meeting the requirements associated with airborne infrared target tracking tasks. Full article

This review explores the evolution and current state of aerial drones’ use in geophysical mining applications. Aerial drones have transformed many fields by offering high-resolution and cost-effective data acquisition. In geophysics, drones equipped with advanced sensors such as magnetometers, ground-penetrating radar, electromagnetic induction, and gamma-ray spectrometry have enabled more precise and rapid subsurface investigations, reducing operational costs and improving safety in mining exploration and monitoring. Over the last decade, advances in drone navigation, sensor integration, and data processing have improved the accuracy and applicability of geophysical surveys in mining. This review provides a historical overview and examines the latest developments in aerial drones, sensing technologies, data acquisition strategies, and processing methodologies. It analyses 59 studies spanning 66 drone-based geophysical applications and 63 geophysical method entries, published between 2005 and 2025. Multirotor drones are the most common, used in 72.73% of cases, followed by fixed-wing drones (12.12%), unmanned helicopters (9.09%), hybrid VTOL designs (3.03%), airships (1.52%), and one unspecified platform (1.52%). In terms of geophysical methods, magnetometry was the most frequently used technique, applied in thirty-nine studies, followed by gamma-ray spectrometry (eighteen studies), electromagnetic surveys (five studies), and ground-penetrating radar (one study). The findings show how drone-based geophysical techniques enhance resource exploration, safety, and sustainability in mining. Full article

Despite the growing availability of very-high-resolution (VHR) remote sensing imagery, extracting fine-grained urban features and materials remains a complex task. Land use/land cover (LULC) maps generated from satellite imagery often fall short in providing the resolution needed for detailed urban studies. While hyperspectral imagery offers rich spectral information ideal for material classification, its complex acquisition process limits its use on aerial platforms such as manned aircraft and unmanned aerial vehicles (UAVs), reducing its feasibility for large-scale urban mapping. This study explores the potential of using only RGB and LiDAR data from VHR aerial imagery as an alternative for urban material classification. We introduce an end-to-end workflow that leverages a multi-head segmentation network to jointly classify roof and ground materials while also segmenting individual roof components. The workflow includes a multi-offset self-ensemble inference strategy optimized for aerial data and a post-processing step based on digital elevation models (DEMs). In addition, we present a systematic method for extracting roof parts as polygons enriched with material attributes. The study is conducted on six cities in Flanders, Belgium, covering 18 material classes—including rare categories such as green roofs, wood, and glass. The results show a 9.88% improvement in mean intersection over union (mIOU) for building and ground segmentation, and a 3.66% increase in mIOU for material segmentation compared to a baseline pyramid attention network (PAN). These findings demonstrate the potential of RGB and LiDAR data for high-resolution material segmentation in urban analysis. Full article