Search Results (42)

Accurate localization plays a critical role in enabling underwater vehicle autonomy. In this work, we develop a robust infrastructure-based localization framework that estimates the position and orientation of underwater vehicles using only range measurements from long baseline (LBL) acoustic beacons to multiple on-board receivers. The proposed framework integrates three key components, each formulated as a convex optimization problem. First, we introduce a robust calibration function that unifies multiple sources of measurement error—such as range-dependent degradation, variable sound speed, and latency—by modeling them through a monotonic function. This function bounds the true distance and defines a convex feasible set for each receiver location. Next, we estimate the receiver positions as the center of this feasible region, using two notions of centrality: the Chebyshev center and the maximum volume inscribed ellipsoid (MVE), both formulated as convex programs. Finally, we recover the vehicle’s full 6-DOF pose by enforcing rigid-body constraints on the estimated receiver positions. To do this, we leverage the known geometric configuration of the receivers in the vehicle and solve the Orthogonal Procrustes Problem to compute the rotation matrix that best aligns the estimated and known configurations, thereby correcting the position estimates and determining the vehicle orientation. We evaluate the proposed method through both numerical simulations and field experiments. To further enhance robustness under real-world conditions, we model beacon-location uncertainty—due to mooring slack and water currents—as bounded spherical regions around nominal beacon positions. We then mitigate the uncertainty by integrating the modified range constraints into the MVE position estimation formulation, ensuring reliable localization even under infrastructure drift. Full article

This study introduces an algorithm for quantifying oceanic wind speed and identifying sound sources in the local underwater soundscape. Utilizing low-complexity metrics like one-minute spectral kurtosis and power spectral density levels, the algorithm categorizes different soundscapes and estimates wind speed. It detects rain, vessels, fin and blue whales, as well as clicks and whistles from dolphins. Positioned as a foundational tool for implementing the Ocean Sound Essential Ocean Variable (EOV), it contributes to understanding long-term trends in climate change for sustainable ocean health and predicting threats through forecasts. The proposed soundscape classification algorithm, validated using extensive acoustic recordings (≥32 kHz) collected at various depths and latitudes, demonstrates high performance, achieving an average precision of $89\%$ and an average recall of $86.59\%$ through optimized parameter tuning via a genetic algorithm. Here, wind speed is determined using a cubic function with power spectral density (PSD) at 6 kHz and the MASLUW method, exhibiting strong agreement with satellite data below 15 m/s. Designed for compatibility with low-power electronics, the algorithm can be applied to both archival datasets and real-time data streams. It provides a straightforward metric for ocean monitoring and sound source identification. Full article

Underwater acoustic target recognition (UATR) is challenged by complex marine noise, scarce labeled data, and inadequate multi-scale feature extraction in conventional methods. This study proposes DART-MT, a semi-supervised framework that integrates a Dual Attention Parallel Residual Network Transformer with a mean teacher paradigm, enhanced by domain-specific prior knowledge. The architecture employs a Convolutional Block Attention Module (CBAM) for localized feature refinement, a lightweight New Transformer Encoder for global context modeling, and a novel TriFusion Block to synergize spectral–temporal–spatial features through parallel multi-branch fusion, addressing the limitations of single-modality extraction. Leveraging the mean teacher framework, DART-MT optimizes consistency regularization to exploit unlabeled data, effectively mitigating class imbalance and annotation scarcity. Evaluations on the DeepShip and ShipsEar datasets demonstrate state-of-the-art accuracy: with 10% labeled data, DART-MT achieves 96.20% (DeepShip) and 94.86% (ShipsEar), surpassing baseline models by 7.2–9.8% in low-data regimes, while reaching 98.80% (DeepShip) and 98.85% (ShipsEar) with 90% labeled data. Under varying noise conditions (−20 dB to 20 dB), the model maintained a robust performance (F1-score: 92.4–97.1%) with 40% lower variance than its competitors, and ablation studies validated each module’s contribution (TriFusion Block alone improved accuracy by 6.9%). This research advances UATR by (1) resolving multi-scale feature fusion bottlenecks, (2) demonstrating the efficacy of semi-supervised learning in marine acoustics, and (3) providing an open-source implementation for reproducibility. In future work, we will extend cross-domain adaptation to diverse oceanic environments. Full article

Distributed Acoustic Sensing (DAS) offers numerous advantages, including resistance to electromagnetic interference, long-range dynamic monitoring, dense spatial sensing, and low deployment costs. We initially deployed a water–land DAS system at the Xinfengjiang (XFJ) Reservoir in Guangdong Province, China, to monitor earthquake events. Environmental noise analysis identified three distinct noise zones based on deployment conditions: periodic 18 Hz signals near surface-laid segments, attenuated low-frequency signals (<10 Hz) in the buried terrestrial sections, and elevated noise at transition zones due to water–cable interactions. The system successfully detected hundreds of teleseismic and regional earthquakes, including a Mw7.3 earthquake in Hualien and a local ML0.5 microseismic event. One year later, the DAS system was upgraded with two types of spiral sensor cables at the end of the submarine cable, extending the total length to 5.51 km. The results of detecting both active (transducer) and passive sources (cooperative vessels) highlight the potential of integrating DAS interrogators with spiral sensor cables for the accurate tracking of underwater moving targets. This field trial demonstrates that DAS technology holds promise for the integrated joint monitoring of underwater acoustics and seismic signals beneath lake or ocean bottoms. Full article

Machine learning-based source range estimation is a promising method for enhancing the performance of tracking both the dynamic and static positions of targets in the underwater acoustic environment using extensive training data. This study constructed a machine learning model for source range estimation using ship-radiated noise recorded by two vertical line arrays (VLAs) during the Shallow-water Acoustic Variability Experiment (SAVEX-15), employing the Sample Covariance Matrix (SCM) and the Generalized Cross Correlation (GCC) as input features. A feed-forward neural network (FNN) was used to train the model on the acoustic characteristics of the source at various distances, and the range estimation results indicated that the SCM outperformed the GCC with lower error rates. Additionally, array tilt correction using the array invariant-based method improved range estimation accuracy. The impact of the training data composition corresponding to the bottom depth variation between the source and receivers on range estimation performance was also discussed. Furthermore, the estimated ranges from the two VLA locations were applied to localization using trilateration. Our results confirm that the SCM is the more appropriate feature for the FNN-based source range estimation model compared with the GCC and imply that ocean environment variability should be considered in developing a general-purpose machine learning model for underwater acoustics. Full article

This paper presents a localization method for an underwater multitonal source by using a vertically distributed system in deep water. The system is composed of two kinds of nodes. One is a node at large depth, and the other is a node covering most of the water column. The former and latter are utilized to estimate the source range and depth, respectively. Specifically, the proposed method estimates the source range by matching the spatial arrival angle measured by the first kind of node with the replicas calculated by the acoustic model. Based on the estimation value of the source range, the second kind of node is utilized to estimate the source depth by using an incoherent time reversal method. The effectiveness of the proposed method is demonstrated through numerical simulations. The effects of the measurement error and the sound speed profile mismatch on the performance of the proposed method are also analyzed. Full article

The simultaneous localization and mapping (SLAM) technique provides long-term near-seafloor navigation for autonomous underwater vehicles (AUVs). However, the stability of the interest point detector (IPD) remains challenging in the seafloor environment. This paper proposes an optical–acoustic fusion interest point detector (OAF-IPD) using a monocular camera and forward-looking sonar. Unlike the artificial feature detectors most underwater IPDs adopt, a deep neural network model based on unsupervised interest point detector (UnsuperPoint) was built to reach stronger environmental adaption. First, a feature fusion module based on feature pyramid networks (FPNs) and a depth module were integrated into the system to ensure a uniform distribution of interest points in depth for improved localization accuracy. Second, a self-supervised training procedure was developed to adapt the OAF-IPD for unsupervised training. This procedure included an auto-encoder framework for the sonar data encoder, a ground truth depth generation framework for the depth module, and optical–acoustic mutual supervision for the fuse module training. Third, a non-rigid feature filter was implemented in the camera data encoder to mitigate the interference from non-rigid structural objects, such as smoke emitted from active vents in hydrothermal areas. Evaluations were conducted using open-source datasets as well as a dataset captured by the research team of this paper from pool experiments to prove the robustness and accuracy of the newly proposed method. Full article

Underwater mobile acoustic source target localization encounters several challenges, including the unknown propagation speed of the source signal, uncertainty in the observation platform’s position and velocity (i.e., platform systematic errors), and economic costs. This paper proposes a new two-step closed-form localization algorithm that jointly estimates the angle of arrival (AOA), time difference of arrival (TDOA), and frequency difference of arrival (FDOA) to address these challenges. The algorithm initially introduces auxiliary variables to construct pseudo-linear equations to obtain the initial solution. It then exploits the relationship between the unknown and auxiliary variables to derive the exact solution comprising solely the unknown variables. Both theoretical analyses and simulation experiments demonstrate that the proposed method accurately estimates the position, velocity, and speed of the sound source even with an unknown sound speed and platform systematic errors. It achieves asymptotic optimality within a reasonable error range to approach the Cramér–Rao lower bound (CRLB). Furthermore, the algorithm exhibits low complexity, reduces the number of required localization platforms, and decreases the economic costs. Additionally, the simulation experiments validate the effectiveness of the proposed localization method across various scenarios, outperforming other comparative algorithms. Full article

When an airborne sound source is in rapid motion, the acoustic signal detected by the underwater sensor experiences a substantial Doppler shift. This shift is intricately linked to the motion parameters of the sound source. Analyzing the Doppler shift characteristics of received acoustic signals enables not only the estimation of target motion parameters but also the localization of the airborne sound source. Currently, the predominant methods for estimating parameters of uniformly moving targets are grounded in classical approaches. In this study, the application of the Doppler warping transform, traditionally applicable to sound sources in uniform linear motion, is extended to encompass a broader spectrum of sound source trajectories. Theoretical and experimental data validate the efficacy of this transform in linearizing the Doppler shift induced by a source in curved motion. Building upon this foundation, a methodology is proposed for locating airborne acoustic sources in curved motion from underwater. Sea experimental data corroborate the method’s effectiveness in achieving underwater localization of a helicopter target during curved motion. Full article

Shallow water passive source localization is an essential problem in underwater detection and localization. Traditional matched-field processing (MFP) methods are sensitive to environment mismatches. Many neural network localization methods still have room for improvement in accuracy if they are further adjusted to underwater acoustic characteristics. To address these problems, we propose a deep learning localization method via improved input features and network structure, which can effectively estimate the depth and the closest point of approach (CPA) range of the acoustic source. Firstly, we put forward a feature preprocessing scheme to enhance the localization accuracy and robustness. Secondly, we design a deep learning network structure to improve the localization accuracy further. Finally, we propose a method of visualizing the network to optimize the estimated localization results. Simulations show that the accuracy of the proposed method is better than other compared features and network structures, and the robustness is significantly better than that of the MFP methods. Experimental results further prove the effectiveness of the proposed method. Full article

Angle-of-arrival (AOA) measurements are often used in underwater acoustical localization. Different from the traditional AOA model based on azimuth and elevation measurements, the AOA model studied in this paper uses bearing measurements. It is also often used in the Ultra-Short Baseline system (USBL). However, traditional acoustical localization needs additional range information. If the range information is unavailable, the closed-form solution is difficult to obtain only with bearing measurements. Thus, a localization closed-form solution using only bearing measurements is explored in this article. A pseudo-linear measurement model between the source position and the bearing measurements is derived, and considering the nonlinear relationship of the parameters, a weighted least-squares optimization equation based on multiple constraints is established. Different from the traditional two-step least-squares method, the semidefinite programming (SDP) method is designed to obtain the initial solution, and then a bias compensation method is proposed to further minimize localization errors based on the SDP result. Numerical simulations show that the performance of the proposed method can achieve Cramer–Rao lower bound (CRLB) accuracy. The field test also proves that the proposed method can locate the source position without range measurements and obtain the highest positioning accuracy. Full article

Ocean sound speed is important for underwater acoustic applications, such as communications, navigation and localization, where the assumption of uniformly distributed sound speed profiles (SSPs) is generally used and greatly degrades the performance of underwater acoustic systems. The acquisition of SSPs is necessary for the corrections of the sound ray propagation paths. However, the inversion of SSPs is challenging due to the intricate relations of interrelated physical ocean elements and suffers from the high costs of calculations and hardware deployments. This paper proposes a novel sound speed inversion method based on multi-source ocean remote sensing observations and machine learning, which adapts to large-scale sea regions. Firstly, the datasets of SSPs are generated utilizing the Argo thermohaline profiles and the empirical formulas of the sound speed. Then, the SSPs are analyzed utilizing the empirical orthogonal functions (EOFs) to reduce the dimensions of the feature space as well as the computational load. Considering the nonlinear regression relations of SSPs and the observed datasets, a general framework for sound speed inversion is formulated, which combines the designed machine learning models with the reduced-dimensional feature representations, multi-source ocean remote sensing observations and water temperature data. After being well trained, the proposed machine learning models realize the accurate inversion of the targeted ocean region by inputting the real-time ocean environmental data. The experiments verify the advantages of the proposed method in terms of the accuracy and effectiveness compared with conventional methods. Full article

In order to effectively estimate the depth of the source in the acoustic pressure field, this study investigated the relationship between the distribution of acoustic pressure fields in different adjacent mode groups and the depth of the source in shallow waveguides and proposed a method to estimate the depth of the source on the basis of the adjacent mode group acoustic pressure field. We first derived and calculated the adjacent mode group acoustic pressure field of a typical shallow waveguide, then verified the accuracy of this derivation process through simulations. In addition, combined with singular value decomposition mode extraction, the adjacent mode group acoustic pressure field of the SACLANT experimental data was obtained and used as a comparative parameter for the method presented in this paper. By using the depth of the source as the estimation variable, a simulated annealing algorithm and related parameters were designed, and the feasibility of this method was verified through simulation and experiments. The proposed method achieved a higher localization accuracy without the need for accurate modeling of underwater acoustic channels. Under the conditions of the simulation environment, the average estimation error rate of the method was 0.24%, and with increases in the temperature coefficient and Markov chain length, the average estimation error rate of the method decreased. In the experimental environment, the average estimation error rate of the method was 0.45%. This study provides a method to obtain the depth of source in a shallow waveguide via the adjacent mode group acoustic pressure field. Full article

Source counting is the key procedure of autonomous detection for underwater unmanned platforms. A source counting method with local-confidence-level-enhanced density clustering using a single acoustic vector sensor (AVS) is proposed in this paper. The short-time Fourier transforms (STFT) of the sound pressure and vibration velocity measured by the AVS are first calculated, and a data set is established with the direction of arrivals (DOAs) estimated from all of the time–frequency points. Then, the density clustering algorithm is used to classify the DOAs in the data set, with which the number of the clusters and the cluster centers are obtained as the source number and the DOA estimations, respectively. In particular, the local confidence level is adopted to weigh the density of each DOA data point to highlight samples with the dominant sources and downplay those without, so that the differences in densities for the cluster centers and sidelobes are increased. Therefore, the performance of the density clustering algorithm is improved, leading to an improved source counting accuracy. Experimental results reveal that the enhanced source counting method achieves a better source counting performance than that of basic density clustering. Full article

Energy-efficient and reliable underwater acoustic communication attracts a lot of research due to special marine communication conditions with limited resources in underwater acoustic sensor networks (UASNs). In their final analysis, the existing studies focus on controlling redundant communication and route void that greatly influence UASNs’ comprehensive performances. Most of them consider directional or omnidirectional transmission for partial optimization aspects, which still have many extra data loads and performance losses. This paper analyzes the main issue sources causing redundant communication in UASNs, and proposes a lightweight differentiated transmission to suppress extra communication to the greatest extent as well as balance energy consumption. First, the layered model employs layer ID to limit the scale of the data packet header, which does not need depth or location information. Second, the layered model, fuzzy-based model, random modeling and directional-omnidirectional differentiated transmission mode comb out the forwarders step by step to decrease needless duplicated forwarding. Third, forwarders are decided by local computation in nodes, which avoids exchanging controlling information among nodes. Simulation results show that our method can efficiently reduce the network load and improve the performance in terms of energy consumption balance, network lifetime, data conflict and network congestion, and data packet delivery ratio. Full article