Search Results (23)

Weeds present a pervasive challenge in agricultural fields. The integration of herbicide-resistant crops with chemical weed management offers an effective solution for sustainable weed control while reducing labor inputs, particularly in large-scale intensive farming systems. Consequently, the development of herbicide-resistant cultivars has emerged as an urgent priority. In this study, we found that the G311E mutant gene of Arabidopsis MATE (multidrug and toxic compound extrusion) family transporter DTX6, designated DTX6m, confers robust resistance to bipyridyl herbicides paraquat and diquat in rice. DTX6m-overexpression lines exhibited marked resistance to these two herbicides, tolerating diquat concentrations up to 5 g/L, which is five-fold higher than the recommended field application dosage. Agronomic assessments demonstrated that grain yields of DTX6m-overexpressing plants were statistically equivalent to those of wild-type plants. Moreover, the plants displayed beneficial phenotypic changes, such as accelerated flowering and a slight reduction in height. Seed morphometric analysis indicated that in comparison with the wild-type control, DTX6m-transgenic lines exhibited altered grain dimensions while maintaining consistent 1000-grain weight. Nutritional assays further demonstrated that DTX6m increased the levels of free amino acids in seeds, while normal protein and starch contents were retained. Collectively, these results establish that DTX6m effectively boosts rice resistance to paraquat and diquat, validating DTX6m as a candidate gene for engineering plant herbicide resistance and also implying a potential role for DTX6m in amino acid homeostasis in plants. Full article

This study explores the effects of Tricholoma matsutake-derived insoluble dietary fiber (TMIDF) on the pasting behavior, structural properties, and in vitro digestibility of rice flour. The incorporation of 5% TMIDF significantly increased the peak viscosity (from 2573.21 to 2814.52 mPa·s) by competitively adsorbing water and forming a dense transient network, while simultaneously reducing the final viscosity (from 1998.27 to 1886.18 mPa·s) by inhibiting amylose recrystallization. Multi-scale structural analyses revealed that TMIDF enhanced V-type crystallinity and limited enzyme access via a porous fibrous matrix. Fourier-transform infrared spectroscopy and low-field nuclear magnetic resonance analyses confirmed that hydrogen bonding and water redistribution were key interaction mechanisms. TMIDF significantly lowered in vitro starch digestibility and increased resistant starch content by 16% (from 14.36% to 30.94%) through synergistic effects, including physical encapsulation of starch granules, formation of enzyme-resistant amylose-lipid complexes, and α-amylase inhibition (31.08%). These results demonstrate that TMIDF possesses a unique multi-tiered modulation mechanism, involving structural optimization, enzyme suppression, and diffusion control, which collectively surpasses the functional performance of conventional plant-derived insoluble dietary fibers. This research establishes a theoretical basis for applying fungal insoluble dietary fibers to develop low glycemic index functional foods, highlighting their dual role in improving processing performance and nutritional quality. Full article

Microalgae are considered as sustainable starch producers, yet the carbon sources for this process in terms of starch productivity and functionality require further elucidation. The present study investigated the roles of CO₂ and acetate on the starch production in a marine microalga Tetraselmis subcordiformis, and the ordered structure and digestibility of the starches obtained were characterized. CO₂ and acetate could serve as efficient carbon sources for T. subcordiformis to accumulate starch, with the maximum starch content, yield, and productivity reaching 66.0%, 2.16 g/L, and 0.71 g/L/day on day 3 and the maximum biomass productivity reaching 0.94 g/L/day on day 2, respectively, when 2.5 g/L sodium acetate and 2% CO₂ were simultaneously applied. The addition of acetate under 2% CO₂ improved the photosynthetic efficiency and enhanced the activity of ADP-glucose pyrophosphorylase, facilitating the biomass and starch production. The supply of CO₂ and acetate changed the amylose/amylopectin ratio by affecting the activity of starch branching enzymes and isoamylases. FTIR and XRD analyzes showed that the supply of CO₂ reduced the long- and short-range ordered structure of starch, while acetate promoted the production of additional B- and V-type starch, resulting in a reduced digestibility. The combined supply of 2% CO₂ and 5 g/L sodium acetate enabled the most efficient production of functional resistant starch (RS) measured with Englyst’s method, with a maximum RS content and yield reaching 13.7%DW and 0.40 g/L, respectively, on day 3. This study provided novel insights into the efficient production of high value-added functional starch (RS) from microalgae. Full article

Numerous reports have indicated that the type 3 resistant starch (RS3) derived from Canna edulis can regulate lipid metabolism. However, it remains unclear whether the type 5 resistant starch (RS5) exhibits similar effects. In this study, RS5 was prepared from Canna edulis native starch and lauric acid through a hydrothermal method for the first time, and its nutritional intervention effects on hyperlipidemia in mice were investigated. The Canna edulis type 5 resistant starch (Ce-RS5) prepared using Canna edulis native starch and lauric acid exhibited a high compound index and resistant starch content, along with decreased swelling power and enhanced starch granule stability. The crystallinity of Ce-RS5 was decreased, and its crystal structure displayed a B+V pattern. Microscopically, the surface appeared rough with deepened grooves, and the granules were loose. Feeding mice with 1.5 g/kg and 3 g/kg of Ce-RS5 significantly reduced their body weight, positively regulated their blood lipid levels, and improved liver damage and fat accumulation. Additionally, Ce-RS5 promoted the abundance of beneficial gut bacteria, such as norank_f_Muribaculaceae, and inhibited the abundance of harmful bacteria like Colidextribacter. This study provides the first evidence of the hypolipidemic and weight loss effects of Ce-RS5 in hyperlipidemia mice. Full article

The formation of resistant starch type 5 (RS5), primarily associated with amylose–lipid complexes, is typically attributed to starches with high-amylose content due to their affinity for lipid interactions. Recently, studies have also investigated the potential of amylopectin-rich starches to form amylopectin–lipid complexes (ALCs), expanding RS5 sources. This study explores the capacity of waxy corn starch (WS), which is rich in amylopectin, to develop ALCs with oleic acid (10% w/w) under different thermal and mechanical conditions. Specifically, WS was treated at temperatures of 80 °C, 85 °C, and boiling, with stirring times of 0 and 45 min. Results demonstrated significant ALC formation, reaching a peak complexation index (CI) of 59% under boiling conditions with 45 min of stirring. Differential scanning calorimetry (DSC) identified a notable endothermic transition at 110 °C, indicating strong ALC interactions. FTIR spectra further evidenced starch–lipid interactions through bands at 2970 cm⁻¹ and 2888 cm⁻¹. X-ray diffraction (XRD) analysis confirmed the presence of orthorhombic nanocrystals in native WS, with ALC samples exhibiting a V-type diffraction pattern, supporting effective complexation. This study advances knowledge on starch–lipid interactions, suggesting ALCs as a promising RS5 form with potential food industry applications due to its structural resilience and associated health benefits. Full article

Background; Turmeric starch (TS) has gained significant attention due to its potential health benefits. Rich in resistant starch (RS) and higher in phosphorus, TS is anticipated to possess properties of high-phosphorus-type RS. Objectives; To understand the host physiology of TS, this study investigated the dose-dependent effects of TS on colonic fermentation in rats. Methods; Four experimental diets containing different levels of TS (5%, 10%, and 20% w/w) were formulated and fed to male Fischer 344 rats for two weeks and compared with rats fed a 0% TS diet (TS0). Results; Results showed that increasing the dose of TS resulted in reduced body weight gain, lower visceral tissue weight, and increased cecal mucin and IgA levels compared with the TS0 group. Further, fecal dry weight increased dose-dependently parallel to the starch excretion rate. Higher doses of TS resulted in increased short chain fatty acid (SCFA) production, specifically cecal acetate content, as well as in a dose-dependent decrease in the cecal pH level. However, this study did not observe a positive effect of TS on colonic alkaline phosphatase (ALP) activity, and the impact on small intestinal ALP activity remains unclear. Notably, beneficial bacteria such as the family Oscillospiraceae, genus Lachnospiraceae NK4A136 group, and Ruminococcus spp. were found to have been enriched in the TS-fed groups, further supporting the beneficial effects of TS on gut microbiota and SCFA production. Additionally, the genus Mucispirillum, which is known to possess beneficial and opportunistic pathogenic traits under immunocompromised states, was found in the TS-fed groups. Conclusions; According to these results, it is clear that TS served as a prebiotic substrate in rats, with a notable modulation of the microbial composition. Full article

Considering the prevalence of diet-related diseases, new ways of preventing them are being sought. One of them is the addition of polyphenols to high-starch products to inhibit their digestibility and reduce their glycemic index. Therefore, this study aimed to investigate the differences between polyphenols popular in food ((+)catechin, epigallocatechin gallate, quercetin, kaempferol, naringenin, hesperidin, trans-ferulic acid, and p-coumaric acid), in terms of their impact on wheat, rice, potato, and maize starch digestibility. Polyphenols were added to starch separately, before and after its pasting, in one of the following doses: 5, 10, and 20 mg. Starch was digested in the presence of single polyphenols to measure RDS (rapidly digestible starch), SDS (slowly digestible starch), RS (resistant starch), and TS (total starch) content. On that basis, the SDI (starch digestion index) was calculated, and the GI (glycemic index) was estimated. The results show that polyphenols inhibit starch digestion at different levels depending on the type of tested starch and the time of polyphenol addition. However, in terms of RDS, TS, and eGI (estimated glycemic index), the greatest impact was observed for epigallocatechin gallate in a dose of 20 mg most frequently, independently of the kind of tested starch and the time of polyphenol addition. Full article

Context and Objectives: Cereals and pseudo-cereals show a variety in terms of shape and color but also nutrition composition and starch structure. Altering particle size and grain integrity may influence the availability of nutrients and their metabolic impact. We studied the impact of different grains with bigger particle sizes than flours on starch digestibility and glycemic and insulinemic indexes in humans. Methods: Moist biscuits, containing 40% of intact grains of quinoa, millet, teff, fonio, or buckwheat grits, and a control made with wheat flour, were produced. Starch digestibility of the final products was analysed according to the Englyst method after two preparation methods: mincing, which led to conditions close to mastication or milling, which led to sample pulverization. Glycemic and insulinemic indexes (GI; II) and response parameters following consumption of these products were evaluated in humans. Product portions provided 50 g of available carbohydrates. The study was performed on 19 healthy normal-weight subjects who tested all six moist biscuits according to a cross-over design. Results: Starch digestibility analyses in minced products showed low Slowly Digestible Starch (SDS) content in control, high SDS content in buckwheat biscuits, high SDS and resistant starch (RS) contents in quinoa and fonio, and high RS in teff and millet products. When analysing milled samples, SDS and RS decreased in buckwheat and quinoa biscuits. RS decreased and SDS increased in teff and millet, and the values remained similar to minced samples for fonio biscuits. GI values for the products were 60 ± 7 for quinoa, 55 ± 7 for millet, 52 ± 7 for control and buckwheat, 41 ± 9 for teff, and 39 ± 5 for fonio biscuits. Teff and fonio biscuits led to lower glycemic responses compared to the other products. Insulin responses were related to the glycemic responses. Conclusions: The type of grains and the use of intact grains strongly impact starch digestibility, allowing for the modulation of glycemic and insulinemic responses. Using different types of grains to wheat and different particle sizes would allow for the modulation of glucose metabolism and potentially lead to long-term beneficial health effects. Full article

The quality standards for the export of chestnuts generate large quantities of rejected fruits, which require novel processing technologies for their safe industrial utilization. This study aimed to investigate the impact of high-pressure processing (HPP) and hydrothermal treatments (HT) on the physicochemical properties of rejected chestnut starch. Chestnuts were treated by HPP at 400, 500, and 600 MPa for 5 min and HT at 50 °C for 45 min. In general, all HPP treatments did not induce starch gelatinization, and their granules preserved the integrity and Maltese-cross. Moreover, starch granules’ size and resistant starch content increased with the intensity of pressure. Native and HT chestnut starches were the most susceptible to digestion. HPP treatments did not affect the C-type crystalline pattern of native starch, but the crystalline region was gradually modified to become amorphous. HPP-600 MPa treated starch showed modified pasting properties and exhibited the highest values of peak viscosity. This study demonstrates for the first time that after HPP-600 MPa treatment, a novel chestnut starch gel structure is obtained. Moreover, HPP treatments could increase the slow-digesting starch, which benefits the development of healthier products. HPP can be considered an interesting technology to obtain added-value starch from rejected chestnut fruits. Full article

The effects of pullulanase debranching combined with autoclaving (PDA) at various debranching times (0 h, 5 h, 10 h, 15 h, 20 h, and 25 h) and 121 °C/20 min of autoclave treatment on the structural and physicochemical characteristics of purple sweet potato (Jinshu No.17) starch were investigated. The results indicated that the native starch (NS) was polygonal, round, and bell-shaped with smooth surfaces. After debranching treatment, the surface of the starch samples became rough and irregular. The molecular weight became smaller after treatments. X-ray diffraction C-type pattern was transformed into a B-type structure in treated samples with increased relative crystallinity. ¹³C NMR indicated an increased propensity for double helix formation and new shift at C1, 3, 5 region compared to NS. The apparent amylose content was 21.53% in the NS. As the swelling power decreased, the percentage of soluble solids increased and different thermal properties were observed. A higher yield of the resistant starch (RS) was observed in all treated starch except PDA 25 h. The findings of our study reveal that a combination of pullulanase debranching time (15 h) and autoclaving (121 °C for 20 min) is a great technique that can be used to produce a higher amount of resistant starch in the Jinshu No.17 starch. Full article

This study aims to find the effects of high (75%) and low (30%) humidity conditions and its correlation with formulation composition on dissolution kinetics of lamotrigine (LMT) from prepared immediate-release tablets during one- and four-week periods. Two types of fillers microcrystalline cellulose (MCC) or anhydrous lactose (LAC), disintegrant sodium starch glycolate (NaSG, 0.5% or 4%), and lubricant magnesium stearate (MgST, 0.25% or 5%) were used. A three-factor two-stage complete factorial design (2³) was used to assess the influence of the composition of the tested formulations. The tablets were produced by direct compression and characterized using a disintegration test, a resistance to crushing test, and dissolution tests (pH 1.2 and pH 6.8). Using Design Expert software, it was concluded that in addition to the effect of fillers on pH 6.8, NaSG has a significant impact after exposure to high and low humidity, as well as its interaction with LAC and MCC. In the dissolution medium pH 1.2, under conditions of high humidity, the content of MgST and NaSG and their interaction show a significant influence. The release rate of LMT was affected by humidity as well as type of excipients and their interactions. Full article

Slowing starch digestibility can delay or even prevent the occurrence and development of type 2 diabetes. To explore the hypoglycemic potential of highland barley polyphenols (HBP), this study investigated the structural characteristics and starch digestibility of individual or mixed HBP-starch complexes. The results showed that a V-type structure was formed in HBP-starch complexes through non-covalent bonds, resulting in a decrease in rapidly digestible starch and an increase in resistant starch. Specially, the compounding of HBP extracted by acetone significantly reduced the rapidly digestible starch content in amylose from 41.11% to 36.17% and increased the resistant starch content from 6.15% to 13.27% (p < 0.05). Moreover, due to different contents and types of monomer phenols, the HBP extracted with acetone were more effective in inhibiting starch digestion than those extracted with methanol. Ferulic acid and catechin were two key components of HBP. Further results indicated that with the increased content of ferulic acid and catechin (from 1% to 5%), they formed a more ordered structure with amylose, resulting in the lower digestibility of the complex. Collectively, this study suggested that highland barley polyphenols could effectively delay starch digestion by forming a more ordered starch crystal structure. Highland barley polyphenols can be used as functional ingredients in regulating the digestive properties of starchy foods. Full article

Resistant dextrins (RDs) were prepared from sorghum and oat starches to determine their molecular structure, physicochemical properties, digestibility and prebiotics effect in vitro. The results showed that the particle size of sorghum resistant dextrin (SRD) and oat resistant dextrin (ORD) was significantly smaller than their respective starches. They formed a block structure, and lost the original A-type structure. In addition, SRD and ORD had good thermal stability, solubility (>90%) and enzymatic hydrolysis resistance (digestibility < 5%). The potential probiotic effects of ORD and SRD were studied by measurement of their promoting effects on the growth of Lactiplantibacillus plantarum, Lactobacillus acidophilus and Lactobacillus delbrueckii. For Lactiplantibacillus plantarum and Lactobacillus acidophilus, the promoting effect of ORD was the best (p < 0.05), and the counts increased by 8.89 and 8.74 log CFU/mL, respectively, compared with the control. For Lactobacillus delbrueckii, SRD was most effective, increasing the counts by 8.72 log CFU/mL compared with the control. These characteristics make SRD and ORD suitable for use as soluble dietary fiber and prebiotics in beverages and the excipients of low-glycemic-index products. Full article

The research subject was the analysis of the microstructure, barrier properties, and mechanical resistance of the psyllium husk (PH)-modified thermoplastic starch films. The tensile tests under various static loading conditions were not performed by researchers for this type of material before and are essential for a more precise assessment of the material’s behavior under the conditions of its subsequent use. The film samples were manufactured by the casting method. PH addition improved starch gelatinization and caused a decrease in failure strain by 86% and an increase in failure stress by 48% compared to pure films. Fourier transform infrared spectroscopy results showed the formation of additional hydrogen bonds between polysaccharides in starch and PH. An increase in the number of hydrophilic groups in the modified films resulted in a faster contact angle decrease (27.4% compared to 12.8% for pure ones within the first 5 s); however, it increased the energy of water binding and surface complexity. The modified films showed the opacity at 600 nm, 43% higher than in the pure starch film, and lower transmittance, suggesting effectively improving barrier properties to UV light, a potent lipid-oxidizing agent in food systems. Full article

A new type of hydroxyalkyl starch, γ-hydroxypropyl starch (γ-HPS), was prepared by etherification of alkali-activated starch with 3-chloropropanol. The reaction efficiency, morphological change, thermodynamic and apparent viscosity properties, and other physicochemical characteristics were described. The molar substitution (MS) of modified whole starch was determined to be 0.008, 0.017, 0.053, 0.106, and 0.178, with a ratio of 5%, 15%, 25%, 35%, and 45% 3-chloropropanol to starch (v/w), respectively. Compared to native starch, the granular size and shape and the X-ray diffraction pattern of γ-HPS are not very different. For low-substituted γ-HPS, the implications may be less evident. Thermal stability measurements by means of thermogravimetric analyses and differential scanning calorimetry (TGA-DSC) proved that thermal stability was reduced and water retaining capacity was increased after hydroxypropylation. Furthermore, the findings also showed that the solubility, light transmittance, and retrogradation of γ-HPS pastes could be improved by etherification. The greater the MS of the γ-HPS, the more its freeze–thaw stability and acid resistivity increased. In this study, we provide relevant information for the application of γ-HPS in food and non-food industries. Full article