Search Results (299)

Space missions working under harsh heliocentric conditions demand more efficient photovoltaics operating under high solar concentration, high temperatures, and harsh radiation conditions. Although most simulation work has been conducted using the terrestrial AM1.5 spectrum, AM0 high concentrators are of great importance to realistic satellite missions. Though III–V multijunction solar cells are currently the norm in space applications, their efficiency under extremely high solar concentration ratios is not yet optimized to support future space missions. This work designs and numerically optimizes a GaAs VTJ solar cell using SILVACO ATLAS software (5.40.0.R). In the optimization, the thickness of the front and back layers, as well as the doping profile within the emitter, base, and tunnel junction regions, were adjusted. The important PV semiconductor attributes, including the short-circuit current density (Jsc), open-circuit voltage (Voc), fill factor (FF), and efficiency (η), were examined over a concentration factor ranging between 1 and 10,000 suns. The efficiency of the optimized VTJ solar cell increased from 20.4% at 1 sun to 26.0% at 10,000 suns. This is mainly due to the near-linear increase in Jsc and the stable FF, which remains between 87% and 89%. In addition, the solar cell shows a steady increase in Voc between 1.85 V and 2.33 V. An optimized GaAs VTJ solar cell design is a promising component in future space missions, which require high power density and are suited to operating under high heliocentric orbits, such as in the Parker Solar Probe and solar-electric propulsion systems. Full article

Bone–patellar tendon–bone (BPTB) grafts used in anterior cruciate ligament reconstruction bend at the femoral tunnel aperture, forming a graft bending angle (GBA). However, the mechanical effects of GBA-related angled loading on bone–BPTB graft constructs remain unclear. This study investigated the effects of GBA and cyclic tensile loading on stiffness and elongation using porcine BPTB grafts. Fourteen specimens were assigned to tibial bone plug constructs (Type T, n = 7) or patellar bone plug constructs (Type P, n = 7). Each construct was cyclically loaded between 10 and 50 N for 50 cycles under GBA conditions of 0°, 30°, 60°, and 90°. Regardless of GBA condition, cyclic loading produced substantial increases in stiffness and elongation during the first 10 cycles, followed by smaller changes. Stiffness tended to decrease under greater GBA conditions, particularly in Type T constructs, where 60° and 90° reduced stiffness and increased elongation. Type P stiffness showed little dependence on GBA. At 0° and 30°, Type P showed lower stiffness and greater elongation than Type T. These findings indicate that bone–BPTB graft tensile behavior is governed by GBA-related loading geometry and bone plug–tendon junction morphology. Full article

Underground mine emergencies compromise fixed communication infrastructure exactly when situational awareness is most critical for effective rescue operations. Existing LoRa mesh protocols fail in underground mines because they ignore the structured topology of tunnel networks, specifically the waveguide effect along straight galleries, severe signal discontinuity at junctions, and the dead-end geometry of working faces. This paper presents the Topology-Aware Concurrent LoRa (TACL) mesh protocol, in which each node autonomously infers its structural role from local RF observations and packet header information, without GPS, pre-loaded mine maps, or central coordination. Role classification resolves the contender estimation problem $\left(N_h\right)$ left open in the prior concurrent transmission literature, enabling provably bounded timing offsets before transmission. TACL assigns a spreading factor (SF)12 to dead-end source nodes for maximum link robustness and SF7–SF10 to relay nodes to create the inter-SF orthogonality margin required for concurrent decoding at junction nodes. Monte Carlo simulation of over 2000 trials yields TACL a PDR of 80.5% versus near-zero for all three baselines, confirming that topology-aware SF diversity is the necessary and sufficient mechanism to prevent junction collision collapse. Hardware deployment at the Missouri S&T Experimental Mine yields a 4.0× PDR improvement over the topology-agnostic concurrent transmission (CT)-fixed baseline, a median end-to-end latency of 1815 ms with 84× tighter latency spread than ALOHA-based protocols and 2.5× lower energy per delivered packet. These results establish that explicit exploitation of underground mine topology is essential for reliable, predictable, and energy-efficient emergency mesh communications in post-disaster underground mine scenarios. Full article

Accurate path-loss models are essential for planning reliable wireless networks in underground mines, yet existing characterization studies rely on specialized channel sounders and vector network analyzers costing tens of thousands of dollars, placing them beyond the reach of most mine operators. This paper demonstrates that LoRa transceivers costing approximately US $15 per node can serve as a self-contained path-loss measurement instrument, logging the received signal strength indicator (RSSI) and signal-to-noise ratio (SNR) directly to a CSV file over a standard USB serial connection. A measurement campaign conducted at the Missouri S&T Experimental Mine on 31 March 2026 collected 4801 packets across four distinct underground canonical primitives: straight tunnel, T-junction, vertical shaft, and post-bend NLoS gallery at distances of 5 to 60 m using Waveshare Pico-LoRa-SX1262 boards operating at 915 MHz. The results reveal a pronounced two-zone propagation structure, including a line-of-sight (LoS) zone with a negative path-loss exponent of −0.34, confirming tunnel waveguide gain up to 25 m, followed by a steep NLoS zone with an exponent of 13.0 after a 24.0 dB bend diffraction loss. Environment-specific measurements quantify a 5.5 dB junction excess loss and a 29.5 dB shaft excess loss relative to a straight-tunnel reference. Spreading factor sensitivity tests across SF7, SF9, and SF12 confirm that RSSI measurements are consistent to within 2 dB across all SFs, validating the measurement methodology. The resulting four-zone path-loss model provides mine network planners with parameters sufficient for LoRa link budget design and relay node placement without any specialized RF instrumentation. Full article

Van der Waals (vdW) multiferroic tunnel junctions (MFTJs) based on two-dimensional layered materials have emerged as a promising platform for next-generation non-volatile memory devices. In this work, we propose and theoretically investigate a high-performance all-vdW MFTJ consisting of a sliding ferroelectric bilayer GeC barrier sandwiched between asymmetric ferromagnetic metallic electrodes, Fe₃GaTe₂ and Fe₃GeTe₂. Using first-principles calculations combined with the non-equilibrium Green’s function (NEGF) method, we demonstrate that the bilayer GeC possesses robust vertical ferroelectricity switchable by interlayer sliding. By incorporating monolayer graphene as protective layers to mitigate metal-induced gap states, the device preserves the intrinsic ferroelectric polarization of the barrier. Our results reveal that four distinct non-volatile resistance states can be realized by independently manipulating the ferroelectric polarization and magnetization configurations. Remarkably, the device exhibits a giant Tunneling Magnetoresistance (TMR) ratio of up to 750.95% and a large Tunneling Electroresistance (TER) ratio of 322.97%. Furthermore, we observe perfect spin-filtering efficiency and a significant negative differential resistance (NDR) effect under finite bias voltage. These findings suggest that the Fe₃GaTe₂/graphene/bilayer-GeC/graphene/Fe₃GeTe₂ heterostructure is a compelling candidate for multifunctional spintronic applications in the post-Moore era. Full article

Surface orientation can influence the aerodynamic response of modern soccer balls, particularly in the drag crisis regime. This study quantified the orientation-dependent aerodynamic characteristics of the FIFA World Cup match ball Trionda using a single specimen and examined how these differences affect simulated flight at sea level and 1500 m altitude. Two reproducible reference orientations were defined: a red-panel-centered orientation (Series A) and a seam-junction-centered orientation (Series B). Each reference orientation was rotated by 0°, 90°, and 180°, resulting in six fixed-orientation conditions. Wind tunnel measurements were repeated three times per condition to obtain drag, lift, and side-force coefficients, and two-dimensional non-spinning flight simulations were performed for representative long-kick and free-kick conditions. All six orientations exhibited drag crisis behavior, but the transition response magnitude, subcritical drag level, and supercritical drag state differed among conditions. The representative transition region occurred at approximately Re = 2.0 × 10⁵ to 2.5 × 10⁵. Among the tested conditions, B-90 showed the lowest full-range mean drag coefficient (0.231), whereas A-90 showed the highest (0.266). In the simulations, lower drag orientations consistently produced longer flight ranges, and the B-90 > A-90 ordering was preserved across representative launch conditions and the expanded parametric comparison. These findings indicate that the aerodynamic response of Trionda cannot be represented adequately by a single mean drag coefficient and that surface orientation should be considered in aerodynamic characterization and flight prediction. Full article

Intercellular mitochondrial trafficking has emerged as an important mechanism influencing tumor progression, metabolic adaptability, and cancer cell plasticity. Beyond their classical bioenergetic functions, mitochondria act as central regulators of redox homeostasis, signaling pathways, and epigenetic remodeling. Increasing evidence suggests that mitochondria can be transferred between tumor, stromal, and immune cells through tunneling nanotubes (TNTs), extracellular vesicles (EVs), gap junctions, and cell fusion within the tumor microenvironment. This dynamic excshange enables metabolically compromised cancer cells to restore oxidative phosphorylation, optimize energy production, and survive under hypoxia and therapeutic stress. Mitochondrial transfer has been increasingly associated with enhanced cellular plasticity and adaptive phenotypic transitions, including the acquisition of stem-like features that contribute to tumor heterogeneity, metastasis, and treatment resistance. In addition to bioenergetic restoration, transferred mitochondrial DNA and metabolites participate in retrograde signaling, linking metabolic state to epigenetic regulation and transcriptional reprogramming. This metabolic epigenetic interplay supports tumor cell adaptation to environmental stress and therapeutic pressure. Although significant progress has been made, the precise mechanisms governing mitochondrial integration and their long-term impact on cellular phenotypes remain incompletely understood. A deeper understanding of these processes may reveal novel therapeutic strategies to disrupt tumor adaptability and progression. Specifically, targeting intercellular mitochondrial trafficking and its associated metabolic and epigenetic effects could help limit tumor plasticity, overcome treatment resistance, reduce disease recurrence, and improve overall clinical outcomes in cancer patients. Full article

Carbon/polymer composites are increasingly designed as microstructure-engineered multifunctional materials that combine mechanical reinforcement with electrical/thermal transport, electromagnetic interference (EMI) shielding, and sensing. Performance is governed less by filler fraction than by the coupled control of network topology, junction resistance, and interfacial thermal boundary resistance under processing-induced shear and thermal histories. Electrical response follows percolation combined with tunneling/contact-controlled junctions, producing nonlinear σ(φ) behavior and high piezoresistive sensitivity near the percolation threshold. In contrast, thermal transport is commonly limited by Kapitza resistance and filler–filler junction resistance, restricting exploitation of the intrinsic conductivity of CNTs and graphene. Recent advances emphasize hybrid and 3D carbon architectures that densify connectivity, reduce junction losses, and enable programmable anisotropy via scalable routes such as masterbatch extrusion and additive manufacturing. However, translation remains constrained by dispersion-driven variability, transport–toughness trade-offs, and incomplete durability assessment under cycling, humidity, and reprocessing. This review consolidates mechanistic structure–processing–property relationships and provides application-driven design rules for sensors, EMI shielding, and thermal management. Full article

Multijunction solar cells employing a GaInP/GaAs/Ge triple-junction configuration are the dominant technology for space photovoltaic applications. The choice of an efficient electrode is crucial in solar cells, as it enables effective charge carrier collection and transport while allowing maximum light to reach the active layer. Indium tin oxide (ITO)/graphene hybrid electrodes have emerged as smart transparent conductors offering significant advantages over conventional brittle ITO films. Graphene electrodes were prepared by cold-wall chemical vapor deposition and ITO electrodes were commercially obtained and used as a base for hybrid ITO/graphene electrodes. Raman spectroscopy confirmed the successful integration and characteristic G and 2D bands on the ITO surface. Nanoscale current mapping via Tunneling Atomic Force Microscopy (TUNA-AFM) verified continuous conductive pathways throughout the film with ~60% increase in nanoscale tunneling current at graphene/ITO interfaces, indicating improved local charge transport pathways. These results demonstrate the suitability of ITO/graphene hybrid electrodes a promising material for multijunction solar cells and other aerospace technologies. Full article

Josephson junctions are key elements in superconducting qubits. Their efficient wafer-scale characterization is crucial for process control and optimization, motivating analysis approaches that extend beyond conventional cryogenic measurements. In this work, we demonstrate that room temperature (RT) capacitance and current–voltage measurements, combined with appropriate data analysis, enable extraction of relevant junction parameters such as oxide thickness, tunnel coefficient, and interfacial defect density. Furthermore, different charge transport mechanisms can be identified from detailed current–voltage analysis. We evaluate our characterization technique using tunnel junctions fabricated on 200 mm wafers in a complementary metal–oxide–semiconductor (CMOS)-compatible subtractive process. The results show a homogeneous average oxide thickness across the wafer with a variation below 3%. A dependence of the tunnel coefficient on oxide thickness indicates a stoichiometry gradient within the oxide. Additionally, low interfacial defect densities in the range of 70–5000 defects/cm² are observed in our junctions, increasing with decreasing oxide thickness, suggesting that wet etching used for thickness control introduces interfacial trap states. Our study highlights the importance of advanced RT characterization for extracting tunnel junction parameters on the wafer scale, enabling effective process monitoring and optimization in industrial superconducting qubit manufacturing. Full article

Molecular-scale detection based on quantum tunnelling is promising for molecular electronics and high-sensitivity analysis, owing to its sensitivity to molecular structure and energy levels. However, conventional two-electrode tunnelling measurements suffer from overlapping conductivity of different molecules, limiting molecular discrimination in complex systems. To address this, we propose an electrochemical-gate-controlled nanoscale tunnelling strategy that expands the two-electrode system to a three-electrode configuration via a tunable gate potential, enabling the differentiation of distinct molecules at near-single-molecule sensitivity. Scanning the gate potential under constant tunnelling bias modulates the alignment between molecular orbitals and the electrode Fermi level, altering the statistical characteristics of molecular tunnelling transport. Experimental results show that target molecules induce a bimodal distribution of tunnelling current (background and molecule-correlated channels), with the second peak exhibiting distinct gate potential dependence. Comparative analysis of ascorbic acid (AA), acetylcholine (ACh), and uric acid (UA) reveals unique trajectories of characteristic peaks with gate potential, forming an electrochemical gate response fingerprint. This gate-dependent conductance trajectory provides a novel statistical dimension for molecular recognition, enabling differentiation of distinct molecules. Full article

Background: The plantaris muscle (PM) shows substantial variability in its proximal belly attachments. Although often deemed vestigial, specific variants may narrow or reshape the popliteal corridor and contribute to vascular (popliteal artery entrapment syndromes, PAES) and neural conflict (TN, CPN, sural nerves). Despite abundant anatomical descriptions of the plantaris, its contribution to neurovascular compression has not been organised into a classification-linked, imaging-integrated framework. Objective: To synthesise adult and foetal anatomical data with clinical–radiological evidence into a classification-linked framework that stratifies vascular and neural compression risk by proximal PM variants, and to propose an integrated risk matrix and variant-directed diagnostic/operative pathway. Methods: Narrative, classification-centred review centred on the Olewnik schema (Types I–VI) and multi-headed/accessory variants. We mapped variant geometry to (1) physiological compromise on provoked Doppler US and (2) anatomical correlates on MRI/MR angiography (MRA) (axial “band sign”), deriving graded risk for vascular and neural axes and an integrated, action-oriented grade per limb. Results: Baseline risk is low for canonical/compact footprints (Type I–IA, Type V), moderate for capsular-junction patterns (Types II/III), and potentially higher-risk for lateral linkage (Type IV; iliotibial band (ITB)/Kaplan fibres continuity) and multi-headed configurations (duplication, bifurcation, ≥3–4 heads; accessory proximal slips). The integrated matrix upgrades risk for a clear band sign, reproducible compromise on provoked Doppler US, or multi-headed/Type IV anatomy and downgrades when rigorous provocation is negative and muscle volume is small. We provide a variant-indexed imaging checklist, common pitfalls (e.g., Type IV misread as ITB thickening; multi-headed variants misread as cyst/tumour), and operative checkpoints to target capsular clefts, lateral bands, tunnels, and accessory slips. Conclusions: A classification-linked, imaging-integrated approach clarifies which proximal PM variants are plausibly associated with neurovascular entrapment (based on case-level evidence) and aligns work-up with targeted decompression and may improve diagnostic precision and inform surgical planning. Clinical relevance: The framework operationalises variant naming in reports, standardises dynamic provocation and axial mapping, and prioritises variants considered higher risk (Type IV; multi-headed) for early multidisciplinary review. Given that most clinical signals derive from case reports/series (Level IV), these recommendations are inferential and should be applied with clinical judgement. Full article

Edge intelligence is often limited by the computation–energy trade-off in resource-constrained devices. Boltzmann machines (BMs) provide strong unsupervised learning capability, yet their reliance on Gibbs sampling makes digital implementations costly in both computation and energy. In this paper, we present a voltage-controlled magnetic anisotropy magnetic tunnel junction (VCMA-MTJ)-based MRAM system that performs in-memory stochastic sampling for state generation and updates in restricted/deep Boltzmann machines (RBMs/DBMs). By exploiting the intrinsic stochastic switching of VCMA-MTJs, the proposed system achieves probabilistic sampling with an energy as low as ∼10 fJ per sample. Implemented on a microcontroller-based edge platform, it enables real-time multi-sensor anomaly detection with an F1-score of 0.9854 and stable operation. The proposed hardware–algorithm co-design achieves in situ stochastic computing and storage within a single MRAM cell, providing an ultra-low-power substrate for probabilistic inference at the edge. Full article

As the process node is scaled down, the spin-transfer-torque magnetic random-access memory (STT-MRAM) exhibits higher memory density than the static random-access memory (SRAM), making it one of the more promising successors of the low-level on-chip cache memory. However, the low read margin (RM) of the magnetic tunnel junction (MTJ) in STT-MRAM can limit the achievable read accuracy. We implemented 2-bit channel quantization for error-correcting code (ECC) schemes and explored the trade-offs between improved read accuracy and factors such as circuit area, power consumption, and latency. The proposed quantization scheme consists of a sensing amplifier-based 2-bit quantizer and MTJ resistor-based soft-decision thresholds. Compared to 1-bit channel quantization using the Bose–Chaudhuri–Hocquenghem (BCH) code, the proposed 2-bit quantization architecture achieves a fourfold reduction in frame error rate (FER) from $8.0\times {10}^{-4}$ to $2.0\times {10}^{-4}$ when paired with polar codes and successive cancellation (SC) decoding. Additionally, this approach results in decoding complexity that is only 1/13th of that required for BCH at a 0.7 code rate. Full article

Advanced solar energy-harvesting devices, such as optical rectennas, typically use metal–insulator–metal diodes because of the ultrafast response of these diodes at high frequencies. However, the diode performance is limited by weak current–voltage (I–V) asymmetry and optical losses in metallic electrodes. Graphene offers a promising alternative electrode material owing to its high carrier mobility, broadband optical transparency, and compatibility with nanoscale device architectures. Nevertheless, graphene-based optical rectennas face challenges associated with insufficient diode nonlinearity. In this study, we developed a vertically stacked graphene–double-insulator–graphene (GI²G) tunnel diode. Devices with various junction sizes were fabricated to investigate size-dependent rectifying behavior. A reduced graphene overlap area was defined by electron-beam lithography to introduce asymmetry and increase nonlinear conduction. An Al₂O₃/SiO₂ tunnel barrier composed of dielectrics with different band gaps and electron affinities improved the asymmetric I–V characteristics. Photoresponse measurements under AM1.5G illumination revealed a clear photocurrent, indicating rectification-related photoresponse. The photoresponse increased with decreasing junction area, which is consistent with enhanced rectification performance in smaller junctions. These results demonstrate that the GI²G tunnel diode provides a promising platform for next-generation energy harvesting and optical sensing applications. Full article