Search Results (335)

Satellite-derived bathymetry (SDB) offers a practical alternative for mapping shallow reefs in remote oceanic settings where acoustic surveys are costly and logistically constrained. Here we benchmark PlanetScope 8-band (3 m) surface reflectance—an underused commercial constellation for reef SDB—using ICESat-2 Advanced Topographic Laser Altimeter System (ATLAS) ATL03 photon data (Release 006) as independent vertical control. Seventeen ATL03 ground tracks (2019–2025) were processed using geometric filtering, photon classification, and explicit air–water refraction correction. This yielded 5171 candidate seafloor observations, of which 5021 were co-located with valid PlanetScope water pixels after Usable Data Mask screening (UDM2/UDM2.1), sun-glint correction, and reflectance quality screening. Four SDB formulations (Lyzenga, Bierwirth, and Stumpf) were calibrated and independently validated using depth-stratified train/validation partitions (70/30, 80/20, and 90/10). Across partitions, the multiband polynomial model of Lyzenga 2006 generalized best (R² = 0.843–0.859; RMSE = 1.734–1.813 m; bias = −0.070 to −0.081 m), followed by Bierwirth (R² = 0.826–0.845; RMSE = 1.818–1.904 m). Lyzenga 1985 reported lower skill (RMSE ≈ 3.1 m), while the Stumpf log-ratio failed in independent validation. ICESat-2 photon bathymetry provides repeatable point-based control in clear waters but remains less precise than echo sounding due to photon classification and spatial-support effects; therefore, uncertainties and applicability limits must be reported. Overall, PlanetScope 3 m, 8-band surface reflectance supports reproducible reef-scale SDB in Seaflower under the evaluated conditions, with Lyzenga 2006 as a robust baseline. Full article

Groundwater drainage-induced karst collapse is a major geohazard in coal-mining regions of central Hunan, threatening residential safety and infrastructure. This study focuses on the Tuoshan minefield in the Jinzhushan mining area by integrating multi-source field data, including surveys of 170 collapse points, long-term groundwater monitoring at six boreholes, and high-density electrical geophysics. A topographically corrected MODFLOW seepage-field model is developed and calibrated for 2014 (RMSE = 0.32 m; NSE = 0.85) and validated for 2015–2016 (RMSE = 0.41 m; NSE = 0.81). To address the large groundwater-level simulation errors commonly encountered in subtropical hilly karst mining settings, the model incorporates a topographic correction, improving simulation accuracy by 12% relative to an uncorrected model. The simulations capture rapid “steep rise–slow fall” groundwater dynamics: Heavy rainfall (>100 mm/day) raises groundwater levels by 2.8–3.1 m within 2–3 days, whereas pumping (200 m³/h) causes a 1.9–2.2 m decline within one week. A 1.2 km drawdown funnel forms and overlaps with 89% of collapse points, indicating that seepage-field evolution and groundwater-level decline control collapse clustering, with soil suffusion and soil–water–rock interaction acting as key amplifying processes. Based on Terzaghi’s effective stress principle and the Theis solution, a collapse prediction formula is derived and validated using measured events (accuracy = 87.5%), and a region-specific critical hydraulic gradient (i_n = 0.85) is determined, lower than values reported for North China. The proposed workflow provides quantitative thresholds and model-based guidance for karst collapse prevention in subtropical mining areas. Full article

Background/Objectives: To evaluate the associations between corneal topographic irregularity, higher-order aberrations (HOAs), and posterior segment structural and microvascular parameters in keratoconus using optical coherence tomography (OCT) and OCT angiography (OCTA). Methods: In this cross-sectional study, 81 eyes with keratoconus and 60 healthy control eyes underwent corneal topography and wavefront analysis, spectral-domain OCT with enhanced depth imaging, and OCTA. Retinal layer thicknesses, choroidal thickness and area metrics, choroidal vascularity index (CVI), and OCTA-derived vascular parameters were analyzed. Associations were assessed using Spearman correlation analysis with false discovery rate (FDR) correction. Results: Compared with controls, keratoconus eyes showed significantly increased corneal curvature, corneal irregularity indices, and HOAs (all p < 0.001). Structural OCT analysis demonstrated preserved inner retinal layers, whereas outer nuclear layer thickness was reduced (p < 0.001) and overall outer retinal layer thickness was increased (p = 0.005). Choroidal thickness and both total and luminal choroidal areas were significantly greater in keratoconus eyes (all p ≤ 0.011), while CVI did not differ between groups (p > 0.05). OCTA revealed reduced superficial capillary plexus vessel density at the whole image and perifoveal regions (all p < 0.001), whereas deep capillary plexus and foveal avascular zone metrics were largely preserved. Correlation analyses identified only weak and inconsistent associations between corneal parameters, HOAs, and posterior segment measurements, none of which remained statistically significant after FDR correction. Conclusions: Despite pronounced anterior segment deformation and optical degradation, posterior segment structural and microvascular alterations in keratoconus are limited and weakly related to corneal disease severity. These findings support a predominantly anterior segment centered pathophysiology of keratoconus and highlight the importance of stringent multiple-comparison control in multimodal imaging studies. Full article

Spaceborne LiDAR systems, such as ICESat-2, provide critical data for global land cover and topography; however, their performance in rugged, vegetated landscapes requires rigorous local validation. This study evaluates the vertical accuracy of ICESat-2 ATL08 terrain height metrics in the complex Turkish Western Black Sea region, utilizing a reference dataset of high-precision terrestrial GNSS measurements. Following strict IQR-based outlier detection and photon density filtering, 1637 spatially matched segments were analyzed. The h_te_best_fit terrain height metric showed the best agreement with the terrestrial GNSS reference data, yielding an RMSE of 3.37 m and a mean bias of −0.42 m, indicating a slight underestimation of the terrain surface. The univariate analysis revealed a strong positive correlation between terrain slope and vertical error, indicating that slope is the prominent degradation factor contributing to pulse broadening. Additionally, dense forest cover was found to limit ground photon retrieval, leading to increased error margins, whereas nighttime acquisitions offered slightly improved precision. These findings suggest that while ATL08 is a valuable topographic source, slope-dependent corrections are essential for applications in mountainous environments. Full article

Precise, spatially explicit sub-provincial GDP estimates are essential for regional planning, especially in mountainous areas where official economic data remain spatially coarse and unevenly distributed. This study develops a multisource county-level GDP spatialization framework for Sichuan Province, China, integrating corrected NPP/VIIRS nighttime-light (NTL) data with Points of Interest (POIs), land-use structure indicators (proportion of farmland (PFL); proportion of construction land (PCL)), elevation, precipitation, accessibility and population density within a unified indicator system. Two regression approaches—Ordinary Least Squares (OLS) as a global benchmark and Geographically Weighted Regression (GWR) as the spatially adaptive primary model—are calibrated on county-level cross-sectional data for 2020 (n = 183) and evaluated using R², adjusted R², AICc and residual spatial diagnostics. The multisource GWR model achieves R² = 0.882 (adjusted R² = 0.872, AICc = 5712.26), substantially outperforming both the global OLS benchmark (R² = 0.801) and NTL-only GWR baseline (R² = 0.662), confirming that spatial nonstationarity is an intrinsic feature of the GDP–proxy relationship and that integrating complementary geospatial proxies is the primary pathway to improved estimation accuracy in topographically heterogeneous regions. The GWR-based GDP surface exhibits a pronounced basin–plateau contrast: high-value clusters concentrate along the Chengdu Plain and adjacent city corridors, while extensive low-value zones prevail across the western highlands (global Moran’s I = 0.33, Z = 14.26, p < 0.001). Spatially varying GWR coefficients reveal that elevation and precipitation constrain GDP most strongly in high-altitude counties, construction land exerts a consistently positive but spatially graded effect, and the influences of accessibility and population density are context-dependent and locally differentiated. These findings support differentiated territorial development policies: plateau counties require accessibility-first strategies; hill counties benefit from targeted small-city industrialization; and basin cores need managed growth to balance agglomeration advantages against congestion pressures. The framework relies exclusively on globally or nationally available data and is portable to other mountainous regions, though cross-regional validation and extension to multi-year panels using geographically weighted panel regression remain important directions for future work. Full article

Utilizing MODIS LST data from 2003 to 2024, in conjunction with multi-source remote sensing data including DEM, land use, NDVI, and nighttime lights, this study conducts a remote sensing quantitative assessment and spatiotemporal characteristic analysis of the urban heat island (UHI) effect in Yinchuan City. An improved urban-rural dichotomy approach was adopted to select rural background areas, and elevation correction of land surface temperature was performed based on the zonal ordinary least squares (OLS) regression to eliminate systematic errors caused by topographic differences. The results show that: (1) From 2003 to 2024, the overall intensity of the UHI in Yinchuan City showed a slight downward trend, while the UHI area continued to expand, presenting the characteristics of “decreasing intensity and expanding scope”; (2) The UHI exhibited concentrated and contiguous distribution in summer, and the cold island phenomenon was significant in winter, reflecting the typical seasonal contrast between summer and winter; (3) The global Moran’s I value increased from 0.39 to 0.82, indicating a significant enhancement in the spatial agglomeration of the UHI; (4) The standard deviation ellipse analysis revealed that the centroid of the UHI migrated toward the westward as a whole, which was consistent with the main axis of urban construction. The research results reveal the long-term evolution law and spatial pattern characteristics of the UHI effect in Yinchuan City, and provide a scientific reference for ecological planning and thermal environment regulation of cities in arid regions. These findings enhance the understanding of long-term urban thermal environment dynamics and provide important scientific support for sustainable urban planning, climate adaptation, and ecological management in arid regions. The study contributes to the quantitative monitoring of urban environmental sustainability and supports sustainable development goals related to climate action and sustainable cities. Full article

Forest fires pose a considerable threat to the security of ecosystems and human society, rendering accurate assessments of fire severity critical for ecological recovery and effective fire management. The differenced Normalized Burn Ratio (dNBR) has been employed to evaluate forest fire severity; however, it presents notable uncertainties owing to variations in data sources, temporal phases, and environmental factors. To address these challenges, this study analyzed 10 forest fires occurring between 2006 and 2023 in central Yunnan Province, China. First, a rapid sampling method utilizing very high-resolution imagery was developed to assess the performance of dNBR classification under varying conditions. Second, the study identified the optimal post-fire observation window and compared classification thresholds and accuracy between Landsat and Sentinel-2 imagery in assessing fire severity. Finally, the research explored the impacts of topographic correction and pre-fire vegetation differences on classification outcomes. The findings revealed the following: (1) Imagery captured in the spring of the fire year, characterized by minimal vegetation interference, demonstrated the highest classification stability and superior capability for identifying high-severity burns. (2) Landsat outperformed Sentinel-2 in regional accuracy (0.92 vs. 0.87), and direct threshold transfer between sensors resulted in a 39% underestimation of high-severity areas, underscoring the necessity for sensor-specific calibration. (3) Topographic correction provided limited practical benefits, merely yielding a marginal improvement in accuracy (+1.44%) with the SCS+C model in steep terrain, and was generally unnecessary. (4) The influence of pre-fire vegetation was discovered to be threshold-dependent: dNBR performed reliably in forests with pre-fire NDVI > 0.5, while adjusted approaches were solely recommended for sparse or heterogeneous vegetation. Overall, this study establishes a systematic framework for optimizing dNBR-based severity assessment, enhancing its accuracy and operational utility in forest fire management. Full article

Flood susceptibility mapping in high-altitude ungauged basins faces a structural dichotomy: physically based models often suffer from systematic biases due to uncertain satellite precipitation, whereas data-driven models are prone to overfitting and lack physical consistency in data-scarce regions. To resolve this, this study proposes a Physically constrained Particle Swarm Optimization–Random Forest (P-PDRF) framework, validated in the Lhasa River Basin. The core innovation lies in coupling a hydrological model with statistical learning by utilizing the maximum daily runoff depth as a “Relative Hydraulic Intensity Index.” This approach leverages the topological correctness of physical simulations to circumvent absolute forcing errors. Furthermore, a Physiographically Constrained Negative Sampling (PCNS) strategy and a PSO-optimized “Shallow Tree” configuration are introduced to enforce structural regularization against stochastic noise. Empirical results demonstrate that P-PDRF achieves superior generalization (AUC = 0.942), significantly outperforming standard Random Forest, Support Vector Machine, and Analytic Hierarchy Process models. Ablation studies confirm that the dynamic index outweighs the static Topographic Wetness Index in feature importance, effectively correcting topographic artifacts where static models misclassify arid depressions as high-risk zones. This study offers a scalable Physics-Informed Machine Learning solution for the global “Prediction in Ungauged Basins” initiative. Full article

Water planning in semi-arid regions depends on climate information that resolves both seasonal timing and topographic gradients. This study evaluated 15 CMIP6 models over Zacatecas, Mexico, and produced a 1 km historical dataset for 1985–2014 by statistically refining bias-corrected daily fields from NEX-GDDP-CMIP6. Downscaling was referenced to the CHELSA climatology: temperature was refined using an elevation-informed hybrid spline approach, whereas rainfall was downscaled with geographically weighted regression (GWR) to represent orographic gradients. The resulting fields were assessed against two independent observational baselines: an automated INIFAP network (2004–2014) and a conventional CONAGUA network (1985–2014). For temperature, BCC-CSM2-MR showed the highest performance, with a Pearson correlation of R = 0.94 for both T_max and T_min. A consistent network-dependent bias pattern was identified: the downscaled models overestimated the diurnal temperature range relative to INIFAP but underestimated it relative to CONAGUA, highlighting the influence of instrumentation and observational protocols on model evaluation. For rainfall, ACCESS-ESM1-5 reproduced the seasonal cycle and dominant orographic patterns, with a correlation of R = 0.611 despite the intrinsic stochasticity of semi-arid rainfall. The resulting 1 km fields provide a spatially consistent baseline for regional applications, including stochastic weather generation and impact models in complex semi-arid regions. Full article

Leaf Area Index (LAI) is a fundamental parameter for characterizing the growth of tea (Camellia sinensis L.). However, in rugged mountainous regions, the combined effects of topographic relief and canopy structural heterogeneity severely constrain the accuracy of UAV-based multispectral LAI retrieval. This study develops an integrated framework combining topographic correction with interpretable machine learning to improve LAI estimation. We utilized a UAV multispectral dataset collected during the peak growing season from a typical tea-growing region in Fujian Province, China (altitude range: 58–186 m), comprising a total of 90 samples. Three topographic correction methods, including Sun–Canopy–Sensor (SCS), SCS with C correction (SCS+C), and Minnaert+SCS, were evaluated in combination with Linear Regression (LR), Decision Tree (DT), Random Forest (RF), and Extreme Gradient Boosting (XGBoost) models. Results indicated that the SCS+C algorithm outperformed other methods by effectively accounting for direct and diffuse radiation components, thereby reducing topographic dependence while maintaining radiometric consistency across heterogeneous surfaces. The XGBoost model combined with SCS+C correction achieved the highest performance (R² = 0.8930, RMSE = 0.6676, nRMSE = 7.93%, MAE = 0.4936, Bias = −0.0836). SHapley Additive exPlanations (SHAP) analysis revealed a structure-dominated retrieval mechanism, in which red-band textural features (Correlation_R) exhibited higher importance than conventional vegetation indices. Compared with previous studies that primarily focus on either topographic correction or model development, this study provides quantitative insights into the underlying retrieval mechanisms. This framework improves the precision of tea LAI retrieval in complex terrains and provides a robust methodological basis for digital management in mountainous agriculture. Full article

This study has explored the effectiveness of machine learning methods for high-precision spatial interpolation of meteorological variables, aiming to provide accurate atmospheric delay corrections for high-precision edge and corner nets observation in complex-terrain environments such as the Xiluodu Hydropower Station, thereby enhancing the accuracy of deformation monitoring. Considering the significant limitations of traditional interpolation methods such as Inverse Distance Weighting (IDW) and Ordinary Kriging (OK) in capturing spatial variability under complex topographic conditions, we systematically introduced machine learning algorithms including Random Forest (RF)and eXtreme Gradient Boosting (XGBoost, XGB) to compare their performance with traditional methods for high-density interpolation of sparsely distributed temperature, relative humidity, and surface pressure, respectively. Concurrently, we proposed an enhanced XGB model incorporating center-point features (XGB-C) which frames spatial interpolation as a supervised learning problem that learns physical mapping from synoptic backgrounds to local microclimates instead of relying on geometric distances alone. The interpolation performance indices (RMSE, MAE, and R²) were evaluated with daily meteorological observations from 47 stations (38 for training, 9 for testing) during 2023–2024. Results demonstrate that machine learning methods significantly outperform traditional approaches, with XGB-C achieving the highest accuracy (R² ≈ 1.00 for pressure, 0.97 for humidity, 0.83 for temperature). Moreover, the interpolation performance also exhibits a dependence on seasons and the station location. Greater challenges are shown in the summer season and in the “Urban and Built-Up” and “Croplands” areas. These findings highlight the substantial advantages of machine learning, particularly the proposed XGB-C, for meteorological interpolation in mountainous hydropower station environments where accurate atmospheric correction is crucial for deformation monitoring. This also lays a solid foundation for developing operational ML-based interpolation models trained with high-quality labels derived from unmanned aerial vehicle (UAV) remote sensing data. Full article

To support the long-term monitoring and preventive conservation of linear cultural heritage, this study proposes a UAV-LiDAR DEM-constrained SBAS-InSAR long-term time-series monitoring method to identify the spatiotemporal deformation patterns and risk-sensitive segments of the near-field ground surface along the Huairou Great Wall. Unlike traditional methods, this research is the first to apply high-resolution UAV-derived DEM for topographic correction and phase modeling in the Huairou Great Wall, aiding in long-term ground deformation monitoring. By integrating multi-scale meteorological data such as precipitation, temperature, and humidity, the study systematically analyzes their impact on deformation. The results reveal significant heterogeneity in ground deformation along the Huairou Great Wall, with the Jiankou section identified as a sensitive area. The study shows a clear event-scale correspondence between rainfall and short-term deformation fluctuations, while air temperature and relative humidity exhibit statistical consistency with cumulative deformation, serving as perturbation cues for sensitivity screening but not direct causal attribution. Compared to traditional ground-based monitoring methods, this approach significantly reduces labor and time costs, enabling large-scale, high-precision, long-term monitoring in a shorter period. It provides a technical basis for identifying risk-prone segments along the Great Wall and conducting post-rainfall inspections, providing a reference for the long-term monitoring and preventive protection of linear cultural heritage. Full article

Plunge shaving is a widely used finishing process for high-precision gears due to its high productivity and cost-effectiveness. However, manufacturing the plunge-shaving cutter itself remains challenging, particularly for modified tooth profiles. Because the theoretical cutter flank exhibits a hyperboloid-like geometry in the lead direction, conventional disk-wheel grinding tends to introduce systematic twist-like topographic bias. To overcome this limitation, a comprehensive mathematical framework is developed for the generative grinding of plunge-shaving cutters using an involute-helicoid grinding worm. Based on envelope theory and homogeneous coordinate transformations, the theoretical cutter surface is first derived, followed by the establishment of a complete kinematic grinding model. A linear least-squares optimization algorithm is then formulated to determine the optimal center-distance compensation parameter for minimizing the normal deviation between the generated and theoretical surfaces. Numerical simulations demonstrate that the proposed method significantly suppresses twist-related topographic errors. In a benchmark moderate-helix case, the maximum residual deviation is controlled to approximately 2 µm. For a more demanding large-helix configuration, a two-level optimization strategy—combining machine-setting compensation and grinding-worm helix-angle adjustment—reduces the peak deviation from about 5.5 µm to 4.7 µm, corresponding to an improvement of approximately 15%. This confirms that worm-geometry tuning provides an additional, effective degree of freedom for high-helix cutter applications. Full article

This paper presents a methodological framework for integrating UAV-based photogrammetry and GIS technologies to generate a high-accuracy digital elevation model (DEM) for urban land-use planning. The study was conducted in an urbanized area characterized by heterogeneous topography, mixed vegetation cover, and fragmented land use, which complicate high-resolution terrain modeling. UAV surveys were performed using multiple photogrammetric blocks with centimeter-level ground sample distance and a dense ground control network supported by geoid-based height corrections. The resulting DEM was independently validated using control points derived from large-scale topographic data. The achieved vertical accuracy (RMSE ≈ 0.25 m) confirms the applicability of UAV-derived DEMs for large-scale mapping (1:1000–1:2000) and urban spatial analysis. Unlike studies focused on runoff simulation, this work emphasizes the accuracy-controlled generation and validation of DEMs as a primary spatial dataset for urban planning applications. The results demonstrate that DEM accuracy depends strongly on flight planning, ground control distribution, and hybrid automatic–manual point cloud refinement. Full article

Extreme rainfall events can trigger widespread landsliding and fluvial erosion, exerting a disproportionate influence on sediment production and landscape evolution in mountainous watersheds. However, hillslope–channel coupling during individual extreme events remains poorly quantified due to the scarcity of event-scale topographic observations. This study investigates event-scale hillslope–channel coupling by quantifying landslide-driven hillslope erosion and channel incision associated with Typhoon Morakot (2009) in the Sinwulu River watershed, southeastern Taiwan. High-resolution pre- and post-event digital surface models (DSMs) were reconstructed using an aerial structure-from-motion multi-view stereo (SfM–MVS) photogrammetry workflow and corrected for canopy height to derive meter-scale topographic changes. Hillslope and channel domains were delineated, and linked hillslope–channel units were used to examine spatial relationships between erosion processes and topographic and hydraulic factors. Results indicate that landslide erosion dominated sediment production during the event with watershed-average erosion of 544.35 mm, while channel responses exhibited strong spatial contrasts, with pronounced incision in upstream reaches and substantial deposition downstream of major knickpoints. Event-scale analysis provides evidence for a strong correspondence between channel incision and hillslope landslide erosion, whereas correlations with commonly used hydraulic proxies such as unit stream power are comparatively weaker. These findings highlight the value of event-scale topographic measurements for elucidating transient hillslope–channel coupling processes during extreme rainfall events. Full article