Search Results (1,027)

Wood recognition plays a vital role in the trade and conservation of rare wood species. However, the computer vision-based methods classify the wood species by the features that are not used within the framework of wood anatomy, leading to results that are not interpretable. This study proposes a novel wood recognition method that detects anatomical structures such as vessels, wood rays, and parenchyma in wood microscopic images. These structures are quantified and mapped to the International Association of Wood Anatomists (IAWA) features, which are then used for species classification. Experimental results on 32 wood species demonstrate the effectiveness of the approach, achieving an accuracy of 94.1%, precision of 92.6%, recall of 93.3%, and an F1-score of 92.7%. In addition to its recognition performance, the method may offer interpretable IAWA-based classification criteria in wood science. These findings suggest that the method could serve as an anatomically interpretable framework for wood species identification, contributing to the regulation of the rare timber trade and supporting the conservation of endangered tree species. Full article

Accurate and scalable estimation of forest production is essential for quantifying carbon sequestration, forecasting timber yields, and guiding climate change mitigation strategies. While prior studies established a positive linkage between net primary production (NPP) and canopy structural complexity (CSC) metrics derived from terrestrial LiDAR, the spatial coverage of ground-based surveys is limited. Airborne laser scanning (ALS) could offer a rapid and spatially extensive alternative to terrestrial scanning, but the predictive capacity of ALS-derived CSC metrics for estimating forest production remains insufficiently explored. To address this gap, we derived a suite of three-dimensional (3D) CSC metrics from small-footprint, high-density ALS data collected by the National Ecological Observatory Network’s Airborne Observation Platform. We evaluated relationships between CSC metrics and the NPP of plots nested within seven deciduous and evergreen temperate forests. Optimal metric combinations for predicting NPP within and across forest types were identified using partial least squares regression coupled with recursive feature elimination. ALS-derived CSC metrics explained 77% (RMSE = 11%) and 76% (RMSE = 13%) of the variance in deciduous and evergreen forest plot NPP, respectively. Our findings demonstrate that 3D CSC metrics derived from high-density ALS are robust predictors of plot-level NPP, offering performance comparable to terrestrial scanners while enabling greater scalability and more efficient data acquisition. Full article

Conventional reports on wildfire damage focus on damage to built structures and life loss without capturing the long-term loss of many environmental benefits provided by natural capital. The assessment of the full cost of a wildfire event can be very challenging and time-consuming due to its broad range of impacts traversing decades. Two major wildfires, the 2021 Caldor Fire and 2022 Mosquito Fire, impacted rural communities and burned nearly 30 percent of the approximately 1 million acres of forests and private timber lands in the Upper American River Watershed (UARW) in California’s Sierra Nevada headwaters. The UARW provides a stock of natural capital that provides a flow of environmental benefits, or ecosystem goods and services, including California statewide water supply that was not recognized in the conventional reporting to properly inform decisions and investments for mitigation and recovery. Leveraging new tools available through the recent valuation of the UARW’s ecosystem goods and services, this study provides a first look at the magnitude of damage to the headwaters’ ecosystem from wildfires and, thus, informs proactive, adaptive management actions and post-disaster recovery and restoration. Using burn severity data and per-acre estimates of ecosystem goods and services, we estimate natural capital damage of over USD 14.8 billion across an optimistically estimated period of 20 years. Several recovery time horizons are used to evaluate the sensitivity of the analysis. These findings provide important benchmarks and a viable approach for all levels of government and private entities responsible for allocating resources, mitigating wildfire risks, and improving watershed health. Full article

As a key tropical economic tree species, the girth of the rubber tree (Hevea brasiliensis) not only reflects its growth rate and timber yield but also determines tapping schedules and non-productive periods. This trait critically influences both the species’ economic value and latex production potential. Despite recent advances in genetic analyses of girth driven by genomic technologies, the number of identified key genes remains insufficient to support molecular breeding programs. This study focuses on 138 samples of rubber tree natural accessions, integrating phenotypic data analysis, population genetic structure analysis, and genome-wide association analysis (GWAS) to identify genetic loci and candidate genes associated with girth. Population stratification divides the tested accessions into four genetic groups: Groups Ⅰ and Ⅳ exhibit high genetic purity, while Groups Ⅱ and Ⅲ display hybrid characteristics. GWAS based on a mixed linear model detects 7 and 23 SNPs significantly associated with girth at p = 4.4 × 10⁻⁸ and p = 2.22 × 10⁻⁷, respectively. The most significant SNP is located at position 44994744 on chromosome CM021229.1. Under the highly significant association threshold, 27 candidate genes were identified, 4 of which are directly related to girth. Gene Ontology (GO) annotation of these 27 candidate genes reveals their primary involvement in metabolic regulation, signal transduction, and cell component construction. Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis shows they are primarily enriched in the “aminoacyl-tRNA biosynthesis” and “glycolysis/gluconeogenesis” pathways. These findings provide significant theoretical support for genetic enhancement and mechanistic analysis of rubber tree growth traits. They reveal novel SNP markers and genes that complement existing genetic resources, refining breeding strategies for elite genotype selection and ultimately contributing to enhanced rubber production. Full article

This article provides a critical review of the current design and research challenges in contemporary timber architecture. Conducted from the perspective of a designer-researcher, the review focuses on the role of wood as a material at the intersection of environmental performance, cultural meaning, and spatial practice. The study adopts a conceptual, problem-oriented approach, eschewing the conventional systematic aggregation of existing data. The objective of this study is to identify, interpret and categorise the key issues that are shaping the evolving discourse on timber architecture. The analysis is based on peer-reviewed literature published between 2020 and 2025, sourced from the Scopus and Web of Science Core Collection databases. Fifteen thematic challenges have been identified and classified according to their recognition level in academic and design contexts. The subjects under discussion include well-established topics, such as life cycle assessment and carbon storage, as well as less commonly explored areas, such as symbolic durability, social acceptance, traceability, and the upcycling of low-grade wood. The review under consideration places significant emphasis on the importance of integrating technical, cultural, and perceptual dimensions when evaluating timber architecture. The article proposes an interpretive framework combining design thinking and transdisciplinary insights. This framework aims to bridge disciplinary gaps and provide a coherent structure for understanding the complexity of timber-related challenges. The framework under discussion here encourages a broader understanding of wood as not only a sustainable building material but also a vehicle for systemic transformation in architectural culture and practice. The study’s insights may support designers, educators, and policymakers in identifying strategic priorities for the development of future-proof timber-based design practices. Full article

Forest volume is an important information for assessing the economic value and carbon sequestration capacity of forest resources and serves as a key indicator for energy flow and biodiversity. Although remote sensing technology is applied to estimate volume, optical remote sensing data have limitations in capturing forest vertical height information and may suffer from reflectance saturation. While LiDAR data can provide more detailed vertical structural information, they come with high processing costs and limited observation range. Therefore, improving the accuracy of volume estimation through multi-source data fusion has become a crucial challenge and research focus in the field of forest remote sensing. In this study, we integrated Sentinel-2 multispectral data, Resource-3 stereoscopic imagery, UAV-based LiDAR data, and field survey data to quantitatively estimate the forest volume in Saihanwula Nature Reserve, located in Inner Mongolia, China, on the southern part of Daxing’anling Mountains. The study evaluated the performance of multi-source remote sensing features by using recursive feature elimination (RFE) to select the most relevant factors and applied four machine learning models—multiple linear regression (MLR), k-nearest neighbors (kNN), random forest (RF), and gradient boosting regression tree (GBRT)—to develop volume estimation models. The evaluation metrics include the coefficient of determination (R²), root mean square error (RMSE), and relative root mean square error (rRMSE). The results show that (1) forest Canopy Height Model (CHM) data were strongly correlated with forest volume, helping to alleviate the reflectance saturation issues inherent in spectral texture data. The fusion of CHM and spectral data resulted in an improved volume estimation model with R² = 0.75 and RMSE = 8.16 m³/hm², highlighting the importance of integrating multi-source canopy height information for more accurate volume estimation. (2) Volume estimation accuracy varied across different tree species. For Betula platyphylla, we obtained R² = 0.71 and RMSE = 6.96 m³/hm²; for Quercus mongolica, R² = 0.74 and RMSE = 6.90 m³/hm²; and for Populus davidiana, R² = 0.51 and RMSE = 9.29 m³/hm². The total forest volume in the Saihanwula Reserve ranges from 50 to 110 m³/hm². (3) Among the four machine learning models, GBRT consistently outperformed others in all evaluation metrics, achieving the highest R² of 0.86, lowest RMSE of 9.69 m³/hm², and lowest rRMSE of 24.57%, suggesting its potential for forest biomass estimation. In conclusion, accurate estimation of forest volume is critical for evaluating forest management practices and timber resources. While this integrated approach shows promise, its operational application requires further external validation and uncertainty analysis to support policy-relevant decisions. The integration of multi-source remote sensing data provides valuable support for forest resource accounting, economic value assessment, and monitoring dynamic changes in forest ecosystems. Full article

Beech forests in the Italian peninsula are actively managed and they also support a high level of biodiversity. Hence, biodiversity conservation can be synergistic with timber production and carbon sequestration, enhancing the overall economic benefits of forest management. This study aimed to evaluate the effect of forest management regimes on bird communities in the Italian Peninsula during 2022 through audio recordings. We studied the structure, composition, and specialization of the breeding bird community in four managed beech stands (three even-aged beech stands aged 20, 60, and 100 years old, managed by a uniform shelterwood system; one uneven-aged stand, managed by a single-tree selection system) and one uneven-aged, unmanaged beech stand in the northern Apennines (Tuscany region, Italy). Between April and June 2022, data were collected through four 1-hour audio recording sessions per site, analyzing 5 min sequences. The unmanaged stand hosted a richer (a higher number of species, p < 0.001) and more specialized (a higher number of cavity-nesting species, p < 0.001; higher Woodland Bird Community Index (WBCI) values, p < 0.001; and eight characteristic species, including at least four highly specialized ones) bird community, compared to all the managed forests; moreover, the latter were homogeneous (similar to each other). Our study suggests that the unmanaged beech forests should be a priority option for conservation, while in terms of the managed beech forests, greater attention should be paid to defining the thresholds for snags, deadwood, and large trees to be retained to enhance their biodiversity value. Studies in additional sites, conducted over more years and including multi-taxon communities, are recommended for a deeper understanding and generalizable results. Full article

Robotic timber joinery demands integrated, adaptive methods to compensate for the inherent dimensional variability of wood. We introduce a seamless robotic workflow to enhance the measurement accuracy of the Workpiece Coordinate System (WCS). The approach leverages a Zivid 3D camera mounted in an eye-in-hand configuration on a KUKA industrial robot. The proposed algorithm applies a geometric method that strategically crops the point cloud and fits planes to the workpiece surfaces to define a reference frame, calculate the corresponding transformation between coordinate systems, and measure the cross-section of the workpiece. This enables reliable toolpath generation by dynamically updating WCS and effectively accommodating real-world geometric deviations in timber components. The workflow includes camera-to-robot calibration, point cloud acquisition, robust detection of workpiece features, and precise alignment of the WCS. Experimental validation confirms that the proposed method is efficient and improves milling accuracy. By dynamically identifying the workpiece geometry, the system successfully addresses challenges posed by irregular timber shapes, resulting in higher accuracy for timber joints. This method contributes to advanced manufacturing strategies in robotic timber construction and supports the processing of diverse workpiece geometries, with potential applications in civil engineering for building construction through the precise fabrication of structural timber components. Full article

The movement towards low-emission and sustainable building practices has driven increased use of natural, carbon-based materials such as wood. While these materials offer significant environmental advantages, their inherent flammability introduces new challenges for timber building safety. Despite advancements in fire protection standards and building regulations, the risk of fire incidents—whether from technical failure, human error, or intentional acts—remains. The rapid detection of fire onset is crucial for safeguarding human life, animal welfare, and valuable assets. This study investigates the potential of monitoring fire precursor gases emitted inside building structures during pre-ignition and early combustion stages. The research also examines the sensitivity and effectiveness of commercial smoke detectors compared with custom sensor arrays in detecting these emissions. A representative structural sample was constructed and subjected to a controlled fire scenario in a laboratory setting, providing insights into the integration of gas sensing technologies for enhanced fire resilience in sustainable building systems. Full article

Thermal resilience is critical for building safety in cold climates during heating outages. This study presents full-scale experimental data from two residential buildings in Poland, tested during the winter of 2024–2025 under both typical and extreme outdoor conditions. The buildings—a lightweight timber-frame structure and a mediumweight masonry structure with ground coupling—were exposed to multi-day heating blackouts, and their thermal responses were monitored at a high temporal resolution. Several resilience indicators were used, including the resistance time (RT), degree of disruption (DoD), and hours of safety threshold (HST). Additionally, two time-based metrics—the time to threshold (T_x) and temperature at X-hours (T(t_x))—were introduced to improve classification in long-duration scenarios. The weighted unmet thermal performance (WUMTP) index was also implemented and validated using experimental data. The results show that thermal mass and ground coupling significantly improved passive resilience, enabling the mediumweight building to maintain temperatures above 15 °C for over 60 h without heating. This study provides new empirical evidence of passive survivability in blackout conditions and supports the development of time-sensitive assessment tools for cold climates. The findings may inform future updates to building codes and retrofit guidelines. Full article

China’s timber market is very complex and heterogeneous, and is experiencing the impact of the construction of national reserve forests and the downturn in the real estate sector. By setting up a partial equilibrium model which reflects the heterogeneity of China’s wood market, not only difference among domestic timber groups can be identified, but the dissimilarity of imported timber can also be differentiated from the aspects of species and sources. This model is capable of capturing the effects of macroeconomic conditions, forestry sector policies, and trade cost variations on China’s timber market structure. According to simulations of supply shocks, China’s large-diameter log capacity enhancement will have a noticeable crowding-out effect on imported timber, suggesting the diameter of logs is an important factor for market entities to make trade-offs between domestic and imported timber. Amidst both supply and demand shocks, the equilibrium quantity changes in China’s domestic small-diameter logs and imported timber are dominated by demand shocks, whereas the equilibrium quantity change in China’s domestic large-diameter logs is dominated by supply shocks; moreover, only domestic large-diameter logs realize quantity increase in double shocks; this improves China’s domestic timber supply structure, and is a good example of “opportunities in crisis” in the face of negative demand shocks. Full article

The modern Chinese architectural heritage combines sturdy Western materials with delicate Chinese styling, mainly adopting brick-timber structural systems that are highly vulnerable to fire damage. The study assesses the fire spread characteristics of the First Faculty House, a 20th-century architectural heritage located at a university in China. The assessment is carried out by analyzing building materials, structural configuration, and fire load. By using FDS (Fire Dynamics Simulator (PyroSim version 2022)) and SketchUp software (version 2023) for architectural reconstruction and fire spread simulation, explores preventive measures to reduce fire risks. The result show that the total fire load of the building amounts to 1,976,246 MJ. After ignition, flashover occurs at 700 s, accompanied by a sharp increase in the heat release rate (HRR). The peak ceiling temperature reaches 750 °C. The roof trusses have critical structural weaknesses when approaching flashover conditions, indicating a high potential for collapse. Three targeted fire protection strategies are proposed in line with the heritage conservation principle of minimal visual and functional intervention: fire sprinkler systems, fire retardant coating, and fire barrier. Simulations of different strategies demonstrate their effectiveness in mitigating fire spread in elongated architectural heritages with enclosed ceiling-level ignition points. The efficacy hierarchy follows: fire sprinkler system > fire retardant coating > fire barrier. Additionally, because of chimney effect, for fire sources located above the ceiling and other hidden locations need to be warned in a timely manner to prevent the thermal plume from invading other sides of the ceiling through the access hole. This research can serve as a reference framework for other Modern Chinese Architectural Heritage to develop appropriate fire mitigation strategies and to provide a methodology for sustainable development of the Chinese architectural heritage. Full article

This study focuses on the development of lignin-based carbon-fiber-reinforced laminated veneer lumber (LVL) beams for garden timber structures, addressing wood shortages and environmental concerns. The research consisted of three main phases: the extraction and characterization of the lignin from corn stalks; the preparation and characterization of lignin-based carbon fibers; the fabrication and testing of reinforced LVL beams. Lignin was extracted from corn stalks using a deep eutectic solvent, followed by the preparation of lignin-based carbon fibers through electrospinning. These carbon fibers were integrated with poplar veneers to create reinforced LVL beams. The test results demonstrated significant improvements in mechanical properties, with the reinforced LVL beams exhibiting a 17% increase in elastic modulus and a 30% enhancement in flexural strength compared with conventional LVL beams. Notable improvements were also observed in tensile strength, compressive strength, and shear strength. This research provides a novel approach for producing high-value-added carbon fibers from agricultural waste, advancing the development of sustainable building materials. Full article

The effects of changes in China’s final demand structure on its forestry sector and associated supply chains have not been thoroughly examined. This study aims to provide a detailed analysis of the quantitative relationships and underlying mechanisms between these interactive changes. Using China’s 153-sector input–output tables from the National Bureau of Statistics and applying a Leontief-based input–output model, we conducted scenario simulations through three distinct schemes, generating both quantitative and qualitative results. Our findings indicate that (1) For China’s forestry sector and its entire value chain to thrive, policymakers should boost consumer demand. This can better stimulate the development of forestry and the “agriculture-forestry-animal husbandry-fishery services” sector and related service industries; (2) Increased investment demand effectively stimulates the development of tertiary industries and secondary industries within the forestry supply chain and boosts the demand and production of intermediate products; (3) Changes in net exports have a significant impact on forestry and the forestry industry chain. To reduce dependence on foreign timber resources, China should strategically expand commercial plantation development; (4) Regarding intermediate product production, investment has a more pronounced effect on increasing total volume compared to consumption. Additionally, the Sino–US tariff disputes negatively impact the forestry industries of both countries. China needs to accelerate import substitution strategies for timber products, adjust international trade markets, and expand domestic consumption and investment to ensure the healthy and stable development of its forestry sector. Full article

This paper investigates the cultural landscapes established by nineteenth-century German immigrants in South Australia and the southern Riverina of New South Wales, with particular attention to settlement patterns, architectural traditions and toponymic transformation. German immigration to Australia, though numerically modest compared to the Americas, significantly shaped local communities, especially due to religious cohesion among Lutheran migrants. These settlers established distinct, enduring rural enclaves characterized by linguistic, religious and architectural continuity. The paper examines three manifestations of these cultural landscapes. A rich toponymic landscape was created by imposing on natural landscape features and newly founded settlements the names of the communities from which the German settlers originated. It discusses the erosion of German toponyms under wartime nationalist pressures, the subsequent partial reinstatement and the implications for cultural memory. The study traces the second manifestation of a cultural landscapes in the form of nucleated villages such as Hahndorf, Bethanien and Lobethal, which often followed the Hufendorf or Straßendorf layout, integrating Silesian land-use principles into the Australian context. Intensification of land use through housing subdivisions in two communities as well as agricultural intensification through broad acre farming has led to the fragmentation (town) and obliteration (rural) of the uniquely German form of land use. The final focus is the material expression of cultural identity through architecture, particularly the use of traditional Fachwerk (half-timbered) construction and adaptations such as pug-and-pine walling suited to local materials and climate. The paper examines domestic forms, including the distinctive black kitchen, and highlights how environmental and functional adaptation reshaped German building traditions in the antipodes. Despite a conservation movement and despite considerable documentation research in the late twentieth century, the paper shows that most German rural structures remain unlisted and vulnerable. Heritage neglect, rural depopulation, economic rationalization, lack of commercial relevance and local government policy have accelerated the decline of many of these vernacular buildings. The study concludes by problematizing the sustainability of conserving German Australian rural heritage in the face of regulatory, economic and demographic pressures. With its layering of intangible (toponymic), structural (buildings) and land use (cadastral) features, the examination of the cultural landscape established by nineteenth-century German immigrants adds to the body of literature on immigrant communities, settler colonialism and landscape research. Full article