Search Results (31)

The global transition to a diversified renewable energy portfolio requires reliable assessment of predictable marine energy resources. This study develops a high-resolution, three-dimensional Regional Ocean Modeling System (ROMS) to quantitatively evaluate theoretical tidal current energy resources in the Bohai and Yellow Seas. The model, configured with fine-scale bathymetry and forced by harmonic tidal constituents, is validated against tide gauge and Acoustic Doppler Current Profiler (ADCP) observations. Multi-year simulations reveal pronounced spatial heterogeneity in tidal current energy distribution. Rather than treating resource assessment as a single power density mapping exercise, this study combines annual mean theoretical power density, peak theoretical power density, threshold-dependent effective flow duration, effective water depth, current directionality, and vertical velocity structure to characterize resource intensity, temporal persistence, and vertical deployability. The results identify distinct hydrodynamic resource regimes. High theoretical resource intensity is concentrated west of Laotieshan Cape and east of Chengshantou, where cumulative annual effective flow duration exceeds 5000 h and short-term instantaneous theoretical power density can reach approximately 10 kW/m² and 8 kW/m², respectively. These peak values indicate strong local tidal acceleration but should be interpreted together with annual mean power density and effective flow duration. In contrast, the northern Jiangsu coastal area exhibits lower peak intensity but relatively persistent moderate flow conditions. The results provide a hydrodynamic resource basis for preliminary site screening and for guiding subsequent turbine-performance, wake/array, environmental, grid accessibility, and techno-economic assessments. Full article

Tidal energy assessment in tropical estuaries is constrained by low current velocities and high spatial variability, which limit conventional evaluation approaches. This study proposes a methodological framework adapted to velocity-constrained environments. The framework integrates ADCP-calibrated hydrodynamic modeling, velocity-exceedance-based site selection, low cut-in tidal turbine compatibility analysis, and a localized Levelized Cost of Energy evaluation within a unified decision-support structure. The methodology is applied to Buenaventura Bay, Colombia, where numerical simulations reproduce the mixed tidal regime with errors of approximately 0.30 m in water levels and 0.022 m/s in current velocities, enabling consistent characterization under low-flow conditions. Results at three locations indicate average available power densities of 64 W/m² at La Bocana, 19 W/m² at Buoy 29, and negligible values at Aguadulce, supporting the identification of marginal and non-viable sites based on velocity distributions. Under a low-velocity turbine configuration (10 m rotor diameter, 0.4 m/s cut-in speed), annual energy production is about 18 MWh per unit, while a 300-turbine array would generate approximately 5.4 GWh per year. The results indicate that annual energy production and capital expenditure are the main drivers of techno-economic feasibility in low-energy estuarine systems. Full article

The increasing deployment of dense offshore wind turbine monopile foundations pose significant challenges for accurately simulating tidal-flow modification and energy transport at the array scale. Balancing physical realism with computational efficiency remains a key challenge in hydrodynamic modelling of offshore wind farms. In this study, an established drag-based source-term approach is implemented through a dedicated module developed within the TELEMAC-3D framework to represent the momentum-blocking effects of offshore wind-farm arrays. A representative dense 8 × 10 wind turbine monopile array configuration is constructed in a typical tidal channel to systematically examine array-induced tidal-flow responses. The results indicate that the drag-based source-term approach preserves the regional-scale tidal flow structure while effectively capturing array-induced local velocity adjustments and pronounced downstream wake attenuation and recovery. Detailed analyses further reveal distinct spatial and temporal characteristics of the velocity response, including the decay and recovery of velocity deviations downstream of the array. In addition, the monopile array induces a clear modulation of flow kinetic energy, characterized by enhanced energy dissipation and a finite array-scale redistribution of kinetic energy. These findings demonstrate that this approach efficiently simulates the array-scale hydrodynamic and energetic impacts of large offshore wind farms and contribute to a better understanding of array-induced tidal flow modification and energy redistribution. Full article

Amid the global transition to carbon neutrality, tidal current energy has become a strategic sustainable energy resource due to its high predictability, power density, and environmental compatibility. Horizontal-axis turbines show great potential for marine energy harvesting, yet the large-scale commercialization of tidal turbines is severely hindered by complex wake dynamics and the lack of reliable, efficient prediction tools for out-of-distribution (OOD) operating conditions. Traditional high-fidelity CFD methods are computationally prohibitive for engineering optimization, while conventional data-driven surrogate models suffer from poor extrapolation performance, extrapolation collapse near training parameter boundaries, and the absence of uncertainty quantification. To address these bottlenecks, this study focuses on the OOD extrapolation of wake flow prediction across tip speed ratio (TSR) distributions for a single horizontal-axis tidal turbine. A CFD-generated spatiotemporal benchmark dataset is constructed for comparative OOD evaluation across various TSR conditions with 9504 total samples. A novel physics-constrained Fourier neural operator framework named TSR-FNO is proposed to improve OOD generalization. The model integrates TSR–Lipschitz regularization to suppress extrapolation collapse and Monte Carlo Dropout to provide reliable uncertainty estimation. Extensive experiments demonstrate that the proposed method effectively reduces prediction error in unseen TSR regimes, mitigates performance degradation in far-field extrapolation, and produces well-calibrated uncertainty estimates consistent with actual prediction confidence. This work provides a data-driven surrogate modeling strategy for fast and reliable wake prediction on a common CFD-generated benchmark, supporting the efficient design, array layout optimization, and engineering deployment of tidal current energy systems. Full article

Local scour around support structures has remained a critical barrier to tidal stream turbine deployment in energetic marine channels since loss of embedment and bearing capacity has undermined stability and delayed commercialization. This review identifies key mechanisms, practical implications, and forward-looking strategies related to local scour. It highlights that rotor operation, small tip clearance, and helical wakes can significantly intensify near-bed shear stress and erosion relative to monopile foundations without turbine rotation. Scour behavior is compared across monopile, tripod, jacket, and gravity-based foundations under steady flow, reversing tides, and combined wave and current conditions, revealing their influence on depth and morphology. The review further assesses coupled interactions among waves, oscillatory currents, turbine-induced flow, and seabed response, including sediment transport, transient pore pressure, and liquefaction risk. Advances in prediction methods spanning laboratory experiments, high-fidelity simulations, semi-empirical models, and data-driven techniques are synthesized, and mitigation strategies are evaluated across passive, active, and eco-integrated approaches. Remaining challenges and specific research needs are outlined, including array-scale effects, monitoring standards, and integration of design frameworks. The review concludes with future directions to support safe, efficient, and sustainable turbine deployment. Full article

In the context of energy shortages and the development of new energy sources, tidal current energy has emerged as a promising alternative. It is typically harnessed by deploying arrays of multiple water turbines offshore. Vertical axis water turbines (VAWTs), as key units in these arrays, have wake effects that influence array spacing and energy efficiency. However, existing studies on wake velocity distribution models for VAWTs are limited in number, accuracy, and consideration of influencing factors. A precise theoretical model (Lam’s formula) for wake lateral velocity can better predict wake decay, aiding in the optimization of tidal current energy array designs. Turbulence in the ocean, serving as a medium for energy exchange between high-energy and low-energy water flows, significantly impacts the wake recovery of water turbines. To simplify the problem, this study uses software ANSYS Fluent 2020 R2 for two-dimensional simulations of VAWT wake decay under different turbulence intensities, confirming the critical role of turbulence intensity in wake velocity decay. Based on the obtained data, a new mathematical approach was employed to incorporate turbulence intensity into Lam’s wake formula for VAWTs, improving its predictive accuracy with a minimum error of 1%, and refining some parameter calculations. The results show that this model effectively reflects the impact of turbulence on VAWT wake recovery and can be used to predict wake decay under various turbulence conditions, providing a theoretical basis for VAWT design, optimization, and array layout. Full article

In this paper, we propose a new 3D model for vertical-axis tidal turbines (VATTs) embedded in the shallow-water code SHYFEM. The turbine model is based on the Blade-Element∖Momentum (BEM) theory and, therefore, is able to predict turbine performance based on the local flow conditions and the geometric characteristics of the turbine. It is particularly suitable for studying turbine arrays, as it can capture the interactions between the turbines. For this reason, the model is used to test a tidal farm of 21 devices with fluid dynamic simulations. In particular, we deploy the farm at Portland Bill, which is a marine site characterised by a wide spread in the direction of the tidal currents during a flood-ebb tide cycle. We optimised the lateral and longitudinal spacing of the turbines in a fence using computational fluid dynamics simulations and then performed a sensitivity analysis by changing the distance between the fences. The results show that the greater the distance between the fences, the higher the power output. The increase in power generation is around 16%, but this implies a huge increase in the horizontal extent of the farm. Further assessments should be carried out, as the expansion of a marine area dedicated to energy exploitation may conflict with other stakeholder interests. Full article

Offshore wind farms (OWFs), built extensively in recent years, induce changes in the surrounding water environment. The changes in the suspended sediment concentration (SSC) and chlorophyll-a concentration (Chl-aC) induced by an OWF in the Yangtze River Estuary were analyzed based on Chinese Gaofen (GF) satellite data. The results show the following: (1) The flow near the wind turbines makes the bottom water surge, driving the sediment to “re-suspend” and be lost, deepening the scour pit around the bottom of the wind turbines, which is known as “self-digging”. The interaction between the pillar of a wind turbine and tidal currents makes hydrodynamic factors more complicated. Blocking by wind turbines promoting the scour of the bottom seabed of the OWF results in speeding up the circulation rate of sediment loss and “re-suspension”, which contributes to the change in the SSC and Chl-aC. This kind of change in sediment transport in estuarine areas due to human construction affects the balance of the ecological environment. Long-term sediment loss around wind turbines also influences the safety of wind turbines. (2) The SSC and Chl-aC are mainly in the range of 200–600 mg/L and 3–7 μg/L, respectively, in the OWF area, higher than the values obtained in surrounding waters. The SSC and Chl-aC downstream of the OWF are higher than those upstream, with differences of 100–300 mg/L and 0.5–2 μg/L. High SSC and Chl-aC “tails” appear downstream of wind turbines, consistent with the direction of local tidal currents, with lengths in the range of 2–4 km. In addition, the water environment in the vicinity of a wind turbine array, with a roughly 2–5 km scope (within 4 km during flooding and around 2.5 km during ebbing approximately) downstream of the wind turbine array, is impacted by the OWF. (3) In order to solve the problem of “self-digging” induced by OWFs, it is suggested that the distance between two wind turbines should be controlled within 2–3.5 km in the main flow direction, promising that the second row of wind turbines will be placed on the suspended sediment deposition belt induced by the first row. In this way, the problems of ecosystem imbalance and tidal current structure change caused by sediment loss because of local scouring can be reduced. Furthermore, mutual compensation between wind turbines can solve the “self-digging” problem to a certain extent and ensure the safety of OWFs. Full article

Marine renewable energy (MRE) development will be crucial to achieve worldwide energy decarbonization. In Europe, 1 GW and 40 GW of ocean energy are set to be developed by 2030 and 2050, respectively. Support is essential if wave and tidal stream arrays are to become more economically viable than they currently are. Four recently developed open-access software tools are used in this study to investigate the critical and expensive elements of potential demonstration and commercial scale tidal projects. The tools have been designed and built to assist users with array configurations, foundation and mooring (F&M) design, operation and maintenance (O&M) strategies, and techno-economic analysis. Demonstration of their use is performed in this study to model scenarios for 2 MW, 10 MW, 40 MW, and 100 MW tidal energy projects employing typical 500 kW fixed and 2 MW floating turbines at the West Anglesey Tidal Demonstration Zone in the Irish Sea. The following metrics are examined: the power output and wake losses of staggered and line configurations; the design and costs of simple gravity-based foundations, gravity-based anchors and the four-chain catenary mooring system of a single turbine; the mean O&M costs and farm availability over the project life; and the breakdown of levelized cost of energy (LCoE) for all eight scenarios to ultimately reveal minimum values of 173 EUR/MWh and 147 EUR/MWh for fixed and floating tidal energy technologies, respectively. The thorough analysis facilitated within these four tools to forecast realistic situations in a specific location can help users design a tidal energy project for an area with considerable potential for commercial scale projects, and thus assist the ocean energy community in promoting and nurturing the sector in the years and decades ahead. Full article

This article focuses on the optimization of the layout of a tidal current turbine array (TCTA) using the Quantum Discrete Particle Swarm (QDPS) algorithm. The objective of the optimization is to balance the maximum energy output and minimum levelized cost of energy (LCOE). The optimization model proposed in this paper was constructed by combining a computational tidal model and the QDPS algorithm, which incorporate several advancements, including modeling of underwater terrain, obtaining tidal current field using high-fidelity ocean model, considering turbine properties, formulating partial influence of wakes on turbines, accounting for interactions between multiple wakes, modeling of safe operating distance, developing an LCOE model, and computing the sea space utilization area of a tidal farm. The proposed method was applied to optimize the layout of TCTA in a real waterway, which employed maximum tidal current fields during flooding and ebbing periods of spring tides as input for safety reasons. The results indicate that compared to a regular staggered layout, the total power generation improved by 19% and 16%, and the LCOE reduced by 12% and 15%, respectively, when the concluded optimized layout was utilized. Sea area decreased by 24% when LCOE was minimum. Overall, the proposed method has a better performance and can support the set selection as well as turbines placements of tidal current farms. Full article

The next stage of development of the tidal stream industry will see a focus on the deployment of tidal turbines in arrays of increasing device numbers and rated power. Successful array development requires a thorough understanding of the resource within potential deployment sites. This is predictable in terms of flow speeds, based upon tidal constituents. However, the operating environment for the turbine is more complex than the turbine experiencing a uniform flow, with turbulence, shear and wave conditions all affecting the loading on the turbine components. This study establishes the accuracy with which several alternative modelling tools predict the resource characteristics which define unsteady loading—velocity shear, turbulence and waves—and assesses the impact of the model choice on predicted damage equivalent loads. In addition, the predictions of turbulence are compared to a higher fidelity model and the occurrence of flow speeds to a Delft3D model for currents and waves. These models have been run for a specific tidal site, the Raz Blanchard, one of the major tidal stream sites in European waters. The measured resource and predicted loading are established using data collected in a recent deployment of acoustic Doppler current profilers (ADCPs) as part of the Interreg TIGER project. The conditions are measured at three locations across the site, with transverse spacing of 145.7 m and 59.3 m between each device. Turbine fatigue loading is assessed using measurements and model predictions based on an unsteady blade element momentum model applied to near-surface and near-bed deployment positions. As well as across-site spatial variation of loading, the through life loading over a 5-year period results in an 8% difference to measured loads for a near-surface turbine, using conditions purely defined from a resource model and to within 3% when using a combination of modelled shear with measured turbulence characteristics. Full article

The representation of tidal energy in future renewable energy systems is growing. Most of the current tidal turbine designs are limited by the minimum current velocity required for efficient operation. The Deep Green (DG) is a kite-borne tidal power plant designed to sustain efficient operation in tidal current velocities as low as 1.2 ms⁻¹. This could increase the geographical areas suitable for large-scale tidal power arrays. Numerical modeling of the Deep Green was carried out in a previous study using large eddy simulations and the actuator line method. This numerical model is compared with acoustic Doppler current profiler (ADCP) measurements taken in the wake of a DG operating in a tidal flow under similar conditions. To be comparable, and since the ADCP measures current velocities using averages of beam components, the numerical model data were resampled using a virtual ADCP in the domain. The sensitivity of the wake observations to ADCP parameters such as pulse length, bin length, and orientation of the beams is studied using this virtual ADCP. After resampling with this virtual ADCP, the numerical model showed good agreement with the observations. Overall, the LES/ALM model predicted the flow features well compared to the observations, although the turbulence levels were underpredicted for an undisturbed tidal flow and overestimated in the DG wake 70 m downstream. The velocity deficit in the DG wake was weaker in the observations compared to the LES. The ALM/LES modeling of kite-borne tidal stream turbines is suitable for further studies of array optimization and wake propagation, etc. Full article

An area has been designated for demonstrating the utility of marine hydrokinetic turbines in Minas Passage, Bay of Fundy. Marine renewable energy may be useful for the transition from carbon-based energy sources, but there is concern for the safety of fish that might encounter turbines. Acoustic receivers that detect signals from acoustically tagged fish that pass through the tidal demonstration area and the detection efficiency of tag signals might be used to estimate the likelihood of fish encountering marine hydrokinetic turbines. The method requires that tagged fish passing through the development area will be reliably detected by a receiver array. The present research tests the reliability with which passing tags are detected by suspending tags beneath GPS-tracked drifters. Drifters carrying high residency Innovasea tags that transmitted every 2 s were usually detected by the receiver array even in fast currents during spring tides but pulse-position modulation tags were inadequate. Sometimes very few high residency tag signals were detected when fast tidal currents swept a drifter through the receiver array, so increasing the transmission interval degrades performance at the tidal energy development area. High residency tags suspended close to the sea surface were slightly less likely to be detected if they passed by during calm conditions. Previously measured detection efficiencies were found to slightly overestimate the chances of a high residency tag carried by a drifter being detected as it passed by a receiver. This works elucidates the effectiveness with which acoustically tagged fish are detected in fast, highly turbulent tidal currents and informs the application of detection efficiency measurements to calculate the probability that fish encounter a marine hydrokinetic turbine. Full article

Tidal stream energy is a renewable energy resource that might be developed to offset carbon emissions. A tidal energy demonstration (TED) area has been designated in Minas Passage, Bay of Fundy, for testing and installing marine hydrokinetic (MHK) turbines. Regulations require quantification of the potential for MHK turbine installations to harm local populations of marine animals. Here, we use acoustic telemetry to quantify the probability that post-smolt inner Bay of Fundy salmon encounter a turbine installation at the TED area. Previous work has quantified the detection efficiency of Innovasea HR acoustic tags as a function of the current speed and range from a moored HR2 receiver and also demonstrated that drifters carrying HR tags will be effectively detected when the drifter track crosses the array of HR2 receivers in Minas Passage. Salmon smolts were tagged and released in Gaspereau and Stewiacke Rivers, Nova Scotia, in order that the HR2 receiver array could monitor seaward migration of the post-smolts through Minas Passage and particularly through the TED area. Presently, we formulate and apply a method by which tag signals detected by the HR2 array can be used to estimate the expected number of times that a post-smolt would encounter a single near-surface MHK turbine installation during its seaward migration. Full article

As tidal current and marine hydro-kinetic energy converters start to be deployed in pre-commercial arrays, it is critical that the design conditions are properly characterised. Turbulence is known to influence fatigue loads and power production, so developers use turbulence models to generate unsteady flows in order to simulate device performance. Most such models construct a synthetic flow field using a combination of measured parameters and theoretical assumptions. The majority in use today are based on atmospheric flow conditions and may have limited applicability in tidal environments. In the present work, we compare key turbulence model assumptions (which are recommended by the tidal turbine standards and are used in design software) to turbulence measurements from two tidal test sites in Scotland and Canada. Here, we show that the two sites have different levels of conformity to theoretical models, with significant variability within nearby locations at the same site. The agreement with spectral models is shown to be depth-dependent. The vertical component spectrum is better represented by the Kaimal model, while the streamwise spectrum is better represented by the von Kármán model. With the exception of one site, the shear profiles follow a power law, although with a different exponent to that commonly assumed. Both sites show significant deviations from the theoretical length scales and isotropy ratios. Such deviations are likely to misrepresent the loads experienced by a device. These results highlight the turbulence characteristics at real deployment sites, which are not well represented by current models, and, hence, which must be determined using field measurements. Full article