Search Results (122)

The changes in functional groups during in situ co-pyrolysis of tar-rich coal with wheat straw were systematically examined using synchrotron diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) coupled with thermogravimetric analysis (TGA). Dynamic changes in C=C, C-O, and C-O-C groups were monitored and assessed across 50–500 °C, complemented by thermogravimetric analysis to assess synergistic effects. It revealed that co-pyrolysis significantly alters the thermal cracking pathways of oxygenated structures, reducing the overall onset temperature by approximately 150 °C. Specifically, instead of maintaining thermal stability, co-pyrolysis promoted early structural aromatization and advanced the C=O decomposition onset by 50 °C compared to coal, achieving a remarkable functional group cleavage rate of 47%. Additionally, the C=C formation temperature was advanced by 150 °C. Furthermore, co-pyrolysis effectively suppressed the secondary structural transformations observed in biomass by limiting the relative accumulation of C–O–C structures to merely a 5% increase, compared to a 52% surge in wheat straw. Interestingly, while DRIFTS confirms facilitated localized bond cleavage and deoxygenation, TGA reveals a macroscopic negative synergy regarding overall weight loss. These findings provide profound insights into the complex radical interactions during co-conversion, offering a crucial theoretical basis for optimizing coal–biomass co-pyrolysis technologies. Full article

The increasing demand for ion beams heavier than protons—particularly carbon and helium ions—for cancer therapy has driven the development of advanced accelerator technologies. Although proton therapy is well established, its physical properties limit its effectiveness against certain tumor types, thereby motivating the use of ions with higher linear energy transfer (LET) and greater biological effectiveness. This study presents the design of an Alvarez-type linear accelerator configuration that combines a Quasi-Alvarez Drift Tube Linac (QA-DTL) and a conventional Alvarez Drift Tube Linac (DTL). The proposed systems are intended for accelerating and injecting carbon or helium ions into a cancer therapy synchrotron, as well as accelerating helium ions for radioisotope production. The optimized QA-DTL and DTL structures provide a versatile and efficient solution for future particle therapy facilities, addressing the growing demand for compact, high-performance, and multifunctional accelerator systems. The proposed linac configurations are designed to operate at 352.2 MHz and consist of three sections. For accelerating low-velocity ions, the first section is a QA-DTL, which is the only section powered during the injection of carbon or helium ions (depending on configuration) into the therapy synchrotron at the energy of 5 MeV/u. The QA-DTL is followed by two DTL cavities forming the second and third sections, which further accelerate helium ions to energies of up to 7.1 MeV/u and 10 MeV/u, respectively. The energy of 7.1 MeV/u is chosen because it represents the production threshold of ²¹¹At, one of the most promising alpha emitters for targeted alpha therapy. Full article

Archeological glass has attracted significant attention in recent years. Its archaeometric study has proven to provide remarkable insights into technological development and relationships among ancient cultures. Thus, ancient glass remains have been recovered from oblivion, and their preservation has become a priority. An extraordinarily well-contextualized collection of ancient glass beads, comprising over 1200 pieces, has been recovered from the archeological site of Pintia (Padilla de Duero, Valladolid, Spain). A large fraction of this collection appears to be well preserved. However, recent detailed studies on its most relevant piece, a Phoenician glass pendant, evidenced the presence of carbonatation processes. Accordingly, an extensive analysis of the preservation state of this collection was required to safeguard it for future generations. Thus, 64 representative samples from this collection, including diverse chronologies, morphologies, and colors, were analyzed by micro-FTIR spectroscopy at the IRIS beamline of the BESSY-II synchrotron (Berlin, Germany), yielding ATR and reflectance spectra. This work, the first micro-FTIR spectroscopy study of a large set of pre-Roman glass beads, provided evidence about the preservation of the glass structure of these pieces, as well as about the presence of crystalline weathering products. Full article

Energy-Dispersive X-ray Diffraction (EDXRD) employs a polychromatic (white) X-ray beam and an energy-discriminating detector at a fixed scattering geometry to measure diffracted intensity as a function of photon energy. This technique enables the rapid acquisition of diffraction data over a wide range of d-spacings without mechanical scanning of the scattering angle, making it particularly valuable for time-resolved, bulk-penetrating, and operando studies. In this review, we provide a comprehensive overview of EDXRD, covering the fundamental principles and underlying physics, experimental methodologies and data analysis workflows, synchrotron white-beam implementations compared to monochromatic approaches, detector strategies, parameter optimization for accurate and efficient measurements, and representative applications in high-pressure science and battery research. Finally, we discuss current challenges and future prospects, including advances in detector technology, machine learning-assisted spectral analysis, and the development of standardized, automated EDXRD systems. Full article

This study investigates a 26th Dynasty Ptah–Sokar–Osiris wooden statuette excavated from the Tari cemetery, Giza Pyramids area, to decode ancient Egyptian manufacturing techniques and establish evidence-based conservation strategies of such wooden objects. Using minimal sampling (1.0–2.0 mm²), integrated XRF, synchrotron-based X-ray diffraction, FTIR, and confocal microscopy distinguished original technological choices from burial-induced alterations. The 85 cm Vachellia nilotica sculpture exhibits moderate structural preservation (cellulose crystallinity index 62.9%) with partial chemical deterioration (carbonyl index 2.22). Complete pigment characterization identified carbon black, Egyptian Blue (cuprorivaite, 55 ± 5 wt %), atacamite-dominated green (65 ± 5 wt %) with residual malachite (10 ± 2 wt %), orpiment (60 ± 5 wt %), red ochre (hematite, 60% ± 5 wt %), white pigments (93 ± 5 wt % calcite), and metallic gold (40 ± 5 wt %). Confocal microscopy revealed sophisticated multi-pigment mixing strategies, with black carbon systematically blended with chromophores for nuanced color effects. Atacamite predominance over malachite provides evidence for chloride-mediated diagenetic transformation over 2600 years of burial. Consistent calcite detection (~ 20–45%) across colored layers confirms systematic ground layer application, establishing technological baseline data for 26th Dynasty Lower Egyptian workshops. Near-complete organic binder loss, severe lignin oxidation, and ongoing salt-mediated mineral transformations indicate urgent conservation needs requiring specialized consolidants, paint layer stabilization, and controlled environmental storage. This investigation demonstrates synchrotron methods’ advantages while establishing a minimally invasive framework for studying polychrome wooden artifacts. Full article

The increasing demand for sustainable and functional plant-based foods has driven interest in 3D food printing technologies, which require bioinks with tailored rheological and structural properties. This study investigated the effects of transglutaminase (TGase) on the structure–function relationships of plant protein bioinks from fava bean, mung bean, pea, and soybean. TNBS assays showed a dose-dependent increase in crosslinking (27.46–64.57%), with soybean and pea proteins exhibiting the highest reactivity (p < 0.05). ¹H-NMR confirmed protein-specific ε-(γ-glutamyl)lysine bond formation, and synchrotron FTIR revealed TGase-induced α-helix reduction and β-sheet enrichment, indicative of network formation across all proteins. SDS-PAGE analysis demonstrated TGase-mediated polymerization with high-molecular-weight aggregates, particularly pronounced in soybean, while SEM images revealed denser, more continuous protein networks compared to untreated samples. Rheological characterization showed enhanced viscoelasticity and shear-thinning behavior in all bioinks, supporting extrusion and post-printing stability. Textural analysis indicated improvements in hardness, springiness, cohesiveness, and chewiness across all proteins, with soybean and fava showing the most pronounced increases. These results demonstrate that TGase is a versatile tool for reinforcing plant protein networks, improving printability, structural integrity, and texture in 3D-printed foods, while highlighting protein-specific differences in response. Full article

This article presents a comprehensive overview of the current and emerging roles of cryogenics and superconductivity in medical diagnostics, imaging, and therapy. Beginning with the historical foundations of both fields and their technological maturation, this review emphasizes how cryogenic engineering and superconducting materials have become indispensable to modern medical systems. Cryogenic technologies are highlighted in applications such as cryosurgery, cryotherapy, cryostimulation, and cryopreservation, all of which rely on controlled exposure to extremely low temperatures for therapeutic or biological preservation purposes. This article outlines the operating principles of cryomedical devices, the refrigerants and cooling methods used, and the technological barriers. This paper reviews the latest applications of superconductivity phenomena in medicine and identifies those that could be used in the future. These include cryogenic therapy, radiotherapy (cyclotrons, particle accelerators, synchrotron radiation generation, isotope production, and proton and ion beam delivery), magnetic resonance imaging (MRI), nuclear magnetic resonance spectroscopy (NMR), positron emission tomography (PET), and ultra-sensitive magnetic signal transducers based on SQUIDs for detecting ultra-low bio-signals emitted by human body organs. CT, MRI/NMR, and PET features are compared using the operation principle, specific applications, safety, contraindications for patients, examination time, and additional valued peculiarities. This article outlines the prospects for the development of superconducting and cryogenic materials and technologies in medical applications. Advances in diagnostic imaging are reviewed, with particular attention on the progression from conventional MRI scanners to ultra-high-field (UHF) systems exceeding 7–10.5 T, culminating in the 11.7 T Iseult whole-body MRI magnet. Another important application area described in this article includes biofunctionalized magnetic nanoparticles and superconducting quantum interference devices (SQUIDs), which enable the ultrasensitive detection of biomagnetic fields and targeted cancer diagnostics. Finally, this article identifies future directions of development in superconducting and cryogenic technologies for medicine. Full article

Major vibrational spectroscopy studies have focused on the preparation of chromium coatings via chemical processes (conversion coatings), and few studies have focused on electrochemical processes (electrodeposition). Initially, the chemical precursors were hexavalent chromium salts, but these compounds are now replaced by less toxic trivalent ions. There is a profound understanding of the process when vibrational spectroscopy is used in combination with other techniques. This is the case for chromium(VI) conversion coatings, and the results of several techniques, such as synchrotron infrared microspectroscopy, have made it possible to understand the structure of the two-layer coating and the chemical composition of each layer. Vibrational spectroscopy confirmed the mechanism for coating formation, in which ferricyanide was a redox mediator. In addition, vibrational spectroscopy was effective in determining the mechanism of corrosion resistance of the coatings. Conversely, there are very few studies on the electrodeposition of trivalent chromium ions, and the mechanics of electrodeposition are unknown. To simplify the use of spectroscopy, spectra of potassium dichromate and chromium(III) sulfate are presented as references for coating studies, and a compilation of $\mathrm{C}\mathrm{r}\left(\mathrm{I}\mathrm{I}\mathrm{I}\right)-\mathrm{O}$ and $\mathrm{C}\mathrm{r}\left(\mathrm{V}\mathrm{I}\right)-\mathrm{O}$ vibrational modes is provided to facilitate band assignment. Our review highlights that spectroscopic techniques have been insufficiently applied in this field; however, the results of vibrational spectroscopy accelerate the transition to safer Cr(III) technology. Full article

Ensuring the quality and safety of agricultural and food products is crucial for protecting consumer health, meeting market expectations, and complying with regulatory requirements. Quality and safety parameters are commonly assessed using chemical and microbiological analyses, which are time-consuming, impractical, and involve the use of toxic solvents, often disrupting the material’s original structure. An alternative technique, infrared spectroscopy, including near-infrared (NIR), mid-infrared (MIR), and short-wave infrared (SWIR), has emerged as a rapid, powerful, and minimally destructive technique for evaluating the quality and safety of food and agricultural products. This review focuses on discussing MIR spectroscopy, particularly Fourier transform infrared (FTIR) techniques, with emphasis on the attenuated total reflectance (ATR) measurement mode (globar infrared light source is commonly used) and on the use of synchrotron radiation (SR) as an alternative high-brightness light source. Both approaches enable the extraction of detailed spectral data related to molecular and functional attributes concerning quality and safety, thereby facilitating the assessment of crop disorders, food chemical composition, microbial contamination (e.g., mycotoxins, bacteria), and the detection of food adulterants, among several other applications. In combination with advanced chemometric techniques, FTIR spectroscopy, whether employing ATR as a measurement mode or SR as a high-brightness light source, is a powerful analytical tool for classification based on attributes, variety, nutritional and geographical origins, with or without minimal sample preparation, no chemical use, and short analysis time. However, limitations exist regarding calibrations, validations, and accessibility. The objective of this review is to address recent technological advancements and existing constraints of FTIR conducted in ATR mode and using SR as a light source (not necessarily in combination). It defines potential pathways for the comprehensive integration of FTIR and chemometrics for real-time quality and safety monitoring systems into the global food supply chain. Full article

Electrochemical CO₂ reduction reaction (CO₂RR) is a key technology for achieving carbon neutrality and efficient utilization of renewable energy, capable of converting CO₂ into high-value-added carbon-based fuels and chemicals. Copper (Cu)-based catalysts have attracted significant attention due to their unique performance in generating multi-carbon (C₂₊) products such as ethylene and ethanol; however, there are still many controversies regarding their complex reaction mechanisms, active sites, and the dynamic evolution of intermediates. In situ Raman spectroscopy, with its high surface sensitivity, applicability in aqueous environments, and precise detection of molecular vibration modes, has become a powerful tool for studying the structural evolution of Cu catalysts and key reaction intermediates during CO₂RR. This article reviews the principles of electrochemical in situ Raman spectroscopy and its latest developments in the study of CO₂RR on Cu-based catalysts, focusing on its applications in monitoring the dynamic structural changes of the catalyst surface (such as Cu⁺, Cu⁰, and Cu²⁺ oxide species) and identifying key reaction intermediates (such as *CO, *OCCO(*O=C-C=O), *COOH, etc.). Numerous studies have shown that Cu-based oxide precursors undergo rapid reduction and surface reconstruction under CO₂RR conditions, resulting in metallic Cu nanoclusters with unique crystal facets and particle size distributions. These oxide-derived active sites are considered crucial for achieving high selectivity toward C₂₊ products. Time-resolved Raman spectroscopy and surface-enhanced Raman scattering (SERS) techniques have further revealed the dynamic characteristics of local pH changes at the electrode/electrolyte interface and the adsorption behavior of intermediates, providing molecular-level insights into the mechanisms of selectivity control in CO₂RR. However, technical challenges such as weak signal intensity, laser-induced damage, and background fluorescence interference, and opportunities such as coupling high-precision confocal Raman technology with in situ X-ray absorption spectroscopy or synchrotron radiation Fourier transform infrared spectroscopy in researching the mechanisms of CO₂RR are also put forward. Full article

The EUV light emitted by the synchrotron radiation source exhibits a stable wavelength and pollution-free characteristics, making it highly suitable for technical verification in diverse EUV lithography applications and playing a pivotal role in EUV lithography industry research. To guide the EUV light from the beamline into the experimental platform, this paper proposes a deflection system design based on the Shanghai Synchrotron Radiation Facility (SSRF). This system enables beamline diagnostics for EUV light while facilitating precise positioning and performance testing of the Mo/Si multilayer planar deflection mirror. The deflection system achieves accurate installation and alignment through a coordinate transfer protocol. By imaging the EUV incident light spot on a scintillator and analyzing variations in EUV light intensity data before and after the deflection mirror, the system can accurately measure focused light spot parameters from the beamline and achieve submicron alignment accuracy with 10 μrad angular resolution for the deflection mirror. The proposed design provides valuable insights for advancing EUV lithography technology utilizing synchrotron radiation sources. Full article

Decarbonizing the steel industry relies on a transition from carbon-intensive blast furnace technology to scrap-based secondary steelmaking using electric arc furnaces. This transition introduces tramp elements and leads to their gradual accumulation, which can significantly influence the functional properties of chemically sensitive steel grades. In this study, the combined impact of several tramp element contents on the phase transformations, microstructure and mechanical properties of a 0.3 wt.% C low-alloyed steel was investigated. To achieve this, a reference alloy was produced using the conventional blast furnace production route. It was then compared with two trial alloys, which contained intentionally elevated levels of tramp elements and were produced through an experimental melting route designed to simulate scrap-based electric arc furnace production. The experimental characterization included light optical and electron microscopy, electron back-scatter diffraction, in situ synchrotron high-energy X-ray diffraction coupled with dilatometry, and Vickers hardness testing. The results revealed the formation of displacive transformation products such as martensite and showed that austenite was retained in the tramp element-enriched trial alloys. The combination of solid solution strengthening and martensitic transformation led to a gradual increase in hardness. These findings underscore the critical role of tramp elements in determining the microstructural and mechanical response of steels produced from scrap-based feedstock. Full article

To determine the structure of carbohydrate polymers using conventional analytical technology, several complicated steps are required. We instead adopted a direct approach without the need for pretreatments, using an intense infrared (IR) laser for carbohydrate analysis. IR free-electron lasers (FELs) driven by a linear accelerator possess unique spectroscopic features, including extensive wavelength tunability and high laser energy in the IR region from 1000 cm⁻¹ (10 μm) to 4000 cm⁻¹ (2.5 μm). FELs can induce IR multiphoton dissociation reactions against various molecules by supplying vibrational excitation energy to the corresponding chemical bonds. Chitin from crayfish and cellulose fiber were irradiated by FELs tuned to νC–O (9.1–9.8 μm), νC–H (3.5 μm), and δH–C–O (7.2 μm) in glycosidic bonds, and their low-molecular-weight sugars were separated, which were revealed by combining synchrotron radiation IR spectroscopy and electrospray ionization mass spectrometry. An intense IR laser can be viewed as a “molecular scalpel” for dissecting and directly analyzing the internal components in rigid biopolymers. This method is simple and rapid compared with general analytical techniques. Full article

Despite notable advancements in lithium-ion battery (LIB) technology, growing industrialization, rising energy demands, and evolving consumer electronics continue to raise performance requirements. As the primary determinant of battery performance, cathode materials have become a central research focus. Among emerging candidates, iron-based fluorides show great promise due to their high theoretical specific capacities, elevated operating voltages, low cost (owing to abundant iron and fluorine), and structurally diverse crystalline forms such as pyrochlore and tungsten bronze types. These features make them strong contenders for next-generation high-energy, low-cost LIBs. This review highlights recent progress in iron-based fluoride cathode materials, with an emphasis on structural regulation and performance enhancement strategies. Using pyrochlore-type hydrated iron trifluoride (Fe₂F₅·H₂O), synthesized via ionic liquids like BmimBF₄, as a representative example, we discuss key methods for tuning physicochemical properties—such as electronic conductivity, ion diffusion, and structural stability—via doping, compositing, nanostructuring, and surface engineering. Advanced characterization tools (XRD, SEM/TEM, XPS, Raman, synchrotron radiation) and electrochemical analyses are used to reveal structure–property–performance relationships. Finally, we explore current challenges and future directions to guide the practical deployment of iron-based fluorides in LIBs. This review provides theoretical insights for designing high-performance, cost-effective cathode materials. Full article

Abandoned smelting sites in karst terrain pose a serious environmental problem due to the complex relationship between specific hydrogeological elements and heavy metal contamination. This review combines work from across the globe to consider how karst-specific features (i.e., rapid underground drainage, high permeability, and carbonate mineralogy) influence the mobility, speciation, and bioavailability of “metallic” pollutants, such as Pb, Cd, Zn, and As. In some areas, such as Guizhou (China), the Cd content in the surface soil is as high as 23.36 mg/kg, indicating a regional risk. Molecular-scale analysis, such as synchrotron-based XAS, can elucidate the speciation forms that underlie toxicity and remediation potential. Additionally, we emphasize discrepancies between karst in Asia, Europe, and North America and synthesize cross-regional contamination events. The risk evaluation is complicated, particularly when dynamic flow systems and spatial heterogeneity are permanent, and deep models like DI-NCPI are required as a matter of course. The remediation is still dependent on the site; however, some technologies, such as phytoremediation, biosorption, and bioremediation, are promising if suitable geochemical and microbial conditions are present. This review presents a framework for integrating molecular data and hydrogeological concepts to inform the management of risk and sustainable remediation of legacy metal pollution in karst. Full article