Search Results (3,341)

The rising demand for energy resources and industrial goods presents significant challenges to sustainable development. Sunflower oil, commonly utilized in the food sector, biofuels, and various industrial applications, is notably affected by this demand. In Bulgaria, it serves as a primary source of vegetable fats, ranking second to butter in daily consumption. The aim of this study is to evaluate and propose methods to improve energy and resource efficiency in sunflower oil production in Bulgaria. The analysis is based on data from an energy audit conducted in 2023 at an industrial sunflower oil production facility. Reconstruction and modernization initiatives, which included the installation of high-performance, energy-efficient equipment, led to a 34% increase in energy efficiency. The findings highlight the importance of adjusting the technological parameters such as temperature, pressure, grinding level, and pressing time to reduce energy use and operational costs. Additionally, resource efficiency is improved through more effective raw material utilization and waste reduction. These strategies not only enhance the economic and environmental performance of sunflower oil production but also support sustainable development and competitiveness within the industry. The improvement reduces hexane use by approximately 2%, resulting in energy savings of 12–15 kWh/t of processed seeds and a reduction in CO₂ emissions by 3–4 kg/t, thereby improving the environmental profile of sunflower oil production. Full article

To reveal the influence mechanisms of seasonal climatic factors (wind speed, wind direction, temperature) and leakage direction on hydrogen dispersion and explosion behavior from single-source leaks at typical risk locations (hydrogen storage tanks, compressors, dispensers) in hydrogen refueling stations (HRSs), this work established a full-scale 1:1 three-dimensional numerical model using the FLACS v22.2 software based on the actual layout of an HRS in Xichang, Sichuan Province. Through systematic simulations of 72 leakage scenarios (3 equipment types × 4 seasons × 6 leakage directions), the coupled effects of climatic conditions, equipment layout, and leakage direction on hydrogen dispersion patterns and explosion risks were quantitatively analyzed. The key findings indicate the following: (1) Downward leaks (−Z direction) from storage tanks tend to form large-area ground-hugging hydrogen clouds, representing the highest explosion risk (overpressure peak: 0.25 barg; flame temperature: >2500 K). Leakage from compressors (±X/−Z directions) readily affects adjacent equipment. Dispenser leaks pose relatively lower risks, but specific directions (−Y direction) coupled with wind fields may drive significant hydrogen dispersion toward station buildings. (2) Southeast/south winds during spring/summer promote outward migration of hydrogen clouds, reducing overall station risk but causing localized accumulation near storage tanks. Conversely, north/northwest winds in autumn/winter intensify hydrogen concentrations in compressor and station building areas. (3) An empirical formula integrating climatic parameters, leakage conditions, and spatial coordinates was proposed to predict hydrogen concentration (error < 20%). This model provides theoretical and data support for optimizing sensor placement, dynamically adjusting ventilation strategies, and enhancing safety design in HRSs. Full article

Sewage sludge (SS) is commonly applied as a soil amendment. This practice has raised concern about the dissemination of emerging pollutants (EPs). EPs include compounds such as flame retardants, plasticizers, pharmaceuticals, and personal care products, among others, which may pose risks to human health and ecosystems. The complexity of the SS matrix, combined to the absence of an international legislation framework, makes it necessary to evaluate the techniques available for detecting these contaminants. Detection is typically performed using sensitive analytical techniques; however, the extraction strategy selected remains a crucial step. This review aims to compile different methodologies for the determination of EPs in SS, focusing on extraction strategies reported between 2010 and 2025. Ultrasound-assisted extraction (UAE), pressurized liquid extraction (PLE), and microwave-assisted extraction (MAE) are the most widely used strategies for EPs. UAE is considered the most preferable option, as it enables the extraction of a wide range of compounds without the need for expensive equipment. Among novel techniques, the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method is especially promising, as it is applicable to multiple target compounds. This review provides up-to-date information that can support the development of routine and standardized methodologies for the characterization of EPs in SS. Full article

Monitoring water quality is crucial for achieving clean water and sanitation goals, particularly in remote areas. The project “Morbidity vs. Water Quality for Human Consumption in Tonosí: A Pilot Study” aimed to enhance water quality assessments in Panama using advanced analytical techniques to assess volatile organic compounds, heavy metals, and microbiological pathogens. To support this, the Technical Unit for Water Quality (UTECH) was established, featuring a novel mobile laboratory with cutting-edge technology for accurate testing, minimal chemical reagent use, reduced waste generation, and equipped with a solar-powered battery system. The aim of this paper is to explore the design, deployment, and impact of the UTECH. Furthermore, this study presents results from three sampling points in Tonosí, where several parameters exceeded regulatory limits, demonstrating the capabilities of the UTECH and highlighting the need for ongoing monitoring and intervention. The study also assesses the environmental, social, and economic impacts of the UTECH in alignment with the Sustainable Development Goals and national initiatives. Finally, a SWOT analysis illustrates the UTECH’s potential to improve water quality assessments in Panama while identifying areas for sustainable growth. The study showcases the successful integration of advanced mobile laboratory technologies into water quality monitoring, contributing to sustainable development in Panama and offering a replicable model for similar initiatives in other regions. Full article

Background: Point-of-care ultrasound (POCUS) is gaining recognition as a valuable diagnostic tool in various fields of medicine, including pediatrics. Its application at the point of care enables real-time clinical decision-making, which is particularly advantageous in pediatric settings. Although global interest in POCUS is growing, many European countries—including Poland—still lack formal training programs for POCUS at both the undergraduate and postgraduate levels. Nevertheless, the number of pediatricians incorporating POCUS into their daily clinical practice in Poland is increasing. However, the extent of its use and perceived value among pediatricians remains largely unknown. This study aimed to evaluate the current level of POCUS utilization in pediatric care in Poland, focusing on pediatricians’ self-assessed competencies, perceptions of its clinical utility, and key barriers to its implementation in daily practice. Methods: This cross-sectional study was conducted between July and August 2024 using an anonymous online survey distributed to pediatricians throughout Poland via national professional networks, with a response rate of 7.3%. Categorical variables were analyzed using the chi-square test of independence to assess the associations between key variables. Quantitative data were analyzed using descriptive statistics, and qualitative data from open-ended responses were subjected to a thematic analysis. Results: A total of 210 pediatricians responded. Among them, 149 (71%) reported access to ultrasound equipment at their workplace, and 89 (42.4%) reported having participated in some form of POCUS training. Only 46 respondents (21.9%) reported frequently using POCUS in their clinical routine. The self-assessed POCUS competence was rated as low or very low by 136 respondents (64.8%). While POCUS was generally perceived as a helpful tool in facilitating and accelerating clinical decisions, the main barriers to implementation were a lack of formal training and limited institutional support. Conclusions: Although POCUS is perceived as clinically valuable by the surveyed pediatricians in Poland, its routine use remains limited due to training and systemic barriers. Future efforts should prioritize the development of a validated, competency-based training framework and the implementation of a larger, representative national study to guide the structured integration of POCUS into pediatric care. Full article

With deepening global higher education reforms, outcome-based education has emerged as the core paradigm for teaching model innovation. This study investigates the structural dependencies and teaching effectiveness of the Environmental Design curriculum at Hubei Engineering University in medium-sized cities, China, addressing challenges of enrollment decline and market contraction critical for urban sustainability. Using network analysis, we construct curriculum support and contribution networks and course temporal networks to assess structural dependencies and teaching effectiveness, revealing structural patterns and optimizing the OBE-based Environmental Design curriculum to enhance educational quality and student competencies. Analysis reveals computer basic courses as knowledge transmission hubs, creating a course network with a distinct core–periphery structure. Technical course reforms significantly outperform theoretical course reforms in improving student performance metrics, such as higher average scores, better grade distributions, and reduced performance gaps, while innovative practice courses show peripheral isolation patterns, indicating limited connectivity with core curriculum modules, which reduces their educational impact. These findings provide empirical insights for curriculum optimization, supporting urban sustainable development through enhanced professional talent cultivation equipped to address environmental challenges like sustainable design practices and resource-efficient urban planning. Network analysis applications introduce innovative frameworks for curriculum reform strategies. Future research expansion through larger sample validation will support urban sustainable development goals and enhance professional talent cultivation outcomes. Full article

Effective in situ H₂S removal is essential for the utilization of small, remote natural gas wells, where centralized treatment is often unfeasible. This study presents an integrated environmental–economic assessment of two such processes, LO-CAT^® and triazine-based absorption, using a scenario-based framework. Environmental impacts were assessed via the Waste Reduction Algorithm (WAR), considering both Potential Environmental Impact (PEI) generation and output across eight categories, while economic performance was analyzed based on equipment, chemical, energy, environmental treatment, and labor costs. Results show that the triazine-based process offers superior environmental performance due to lower toxic emissions, whereas LO-CAT^® demonstrates better economic viability at higher gas flow rates and H₂S concentrations. An integrated assessment combining monetized environmental impacts with economic costs reveals that the triazine-based process becomes competitive only if environmental impacts are priced above specific thresholds. This study contributes a practical evaluation framework and scenario-based dataset that support sustainable process selection for decentralized sour gas treatment applications. Full article

While horizontal roughing filters (HRFs) remain widely acclaimed for their exceptional efficiency in water treatment, especially in developing countries, they are inherently susceptible to clogging, which necessitates timely maintenance interventions. Conventional methods for managing clogging in HRFs typically involve evaluating filter head loss coefficients against established water quality standards. This study utilizes artificial neural network (ANN) for the prediction of clogging duration and effluent turbidity in HRF equipment. The ANN was configured with two outputs, the clogging duration and effluent turbidity, which were predicted concurrently. Effluent turbidity was modeled to enhance the network’s learning process and improve the accuracy of clogging prediction. The network steps of the iterative training process of ANN used different types of input parameters, such as influent turbidity, filtration rate, pH, conductivity, and effluent turbidity. The training, in addition, optimized network parameters such as learning rate, momentum, and calibration of neurons in the hidden layer. The quantities of the dataset accounted for up to 70% for training and 30% for testing and validation. The optimized structure of ANN configured in a 4-8-2 topology and trained using the Levenberg–Marquardt (LM) algorithm achieved a mean square error (MSE) of less than 0.001 and R-coefficients exceeding 0.999 across training, validation, testing, and the entire dataset. This ANN surpassed models of scaled conjugate gradient (SCG) and obtained a percentage of average absolute deviation (%AAD) of 9.5. This optimal structure of ANN proved to be a robust tool for tracking the filter clogging duration in HRF equipment. This approach supports proactive maintenance and operational planning in HRFs, including data-driven scheduling of backwashing based on predicted clogging trends. Full article

The global spread of Mpox virus (MPXV) underscores the urgent need for rapid, field-deployable diagnostic tools, especially in low-resource settings. We evaluated a loop-mediated isothermal amplification (LAMP) assay, termed LAMPOX, developed by Coris BioConcept. The assay was tested in three formats—two liquid versions and a dried, ready-to-use version—targeting only the ORF F3L (Liquid V1) or both the ORF F3L and N4R (Liquid V2 and dried) genomic regions. Analytical sensitivity and specificity were assessed using 60 clinical samples from confirmed MPXV-positive patients. Sensitivity on clinical samples was 81.7% for Liquid V1 and 88.3% for Liquid V2. The dried LAMPOX assay demonstrated a sensitivity of 88.3% and a specificity of 100% in a panel of 112 negative controls, with most positive samples detected in under 7 min. Additionally, a simplified sample lysis protocol was developed to facilitate point-of-care use. While this method showed slightly reduced sensitivity compared to standard DNA extraction, it proved effective for samples with higher viral loads. The dried format offers key advantages, including ambient-temperature stability and minimal equipment needs, making it suitable for point-of-care testing. These findings support LAMPOX as a promising tool for rapid MPXV detection during outbreaks, especially in resource-limited settings where traditional PCR is impractical. Full article

Modernizing irrigation systems (ISs) from traditional gravity methods to sprinkler and drip technologies has significantly improved water use efficiency. However, it has simultaneously increased electricity demand and operational costs. Integrating photovoltaic generators into ISs represents a promising solution, as solar energy availability typically aligns with peak irrigation periods. Despite this potential, photovoltaic pumping systems (PVPSs) often face reliability issues due to fluctuations in solar irradiance, resulting in frequent start/stop cycles and premature equipment wear. The IEC 62253 standard establishes procedures for evaluating PVPS performance but primarily addresses steady-state conditions, neglecting transient regimes. As the main contribution, the current paper proposes a non-intrusive, high-resolution monitoring system and a methodology to assess the performance of an isolated, high-power PVPS, considering also transient regimes. The system records critical electrical, hydraulic and environmental parameters every second, enabling in-depth analysis under various weather conditions. Two performance indicators, pumped volume efficiency and equivalent operating time, were used to evaluate the system’s performance. The results indicate that near-optimal performance is only achievable under clear sky conditions. Under the appearance of clouds, control strategies designed to protect the system reduce overall efficiency. The proposed methodology enables detailed performance diagnostics and supports the development of more robust PVPSs. Full article

Background: Family caregivers are a vital yet often under-recognized part of the healthcare system. They provide essential emotional, physical, and logistical support to individuals with illness, disability, or frailty, and their contributions improve continuity of care and reduce system strain. However, many healthcare and social service providers are not equipped to meaningfully engage caregivers as partners. In Alberta, stakeholders validated the Caregiver-Centered Care Competency Framework and identified the need for a three-tiered education model—Foundational, Advanced, and Champion—to help providers recognize, include, and support family caregivers across care settings. This paper focuses on the development and early evaluation of the Advanced Caregiver-Centered Care Education modules, designed to enhance the knowledge and skills of providers with more experience working with family caregivers. The modules emphasize how partnering with caregivers benefits not only the person receiving care but also improves provider effectiveness and supports better system outcomes. Methods: The modules were co-designed with a 154-member interdisciplinary team and grounded in the competency framework. Evaluation used the first three levels of the Kirkpatrick–Barr health workforce education model. We analyzed pre- and post-surveys from the first 50 learners in each module using paired t-tests and examined qualitative feedback and SMART goals through inductive content analysis. Results: Learners reported a high level of satisfaction with the education delivery and the knowledge and skill acquisition. Statistically significant improvements were observed in 53 of 54 pre-post items. SMART goals reflected intended practice changes across all six competency domains, indicating learners saw value in engaging caregivers as partners. Conclusions: The Advanced Caregiver-Centered Care education improved providers’ confidence, knowledge, and skills to work in partnership with family caregivers. Future research will explore whether these improvements translate into real-world practice changes and better caregiver experiences in care planning, communication, and navigation. Full article

The biopharmaceutical industry is undergoing a fundamental transformation from traditional batch manufacturing to continuous manufacturing (CM) for recombinant drugs and biosimilars, driven by regulatory support through the International Council for Harmonization (ICH) Q13 guidance and compelling economic advantages. This comprehensive review examines the technical, economic, and regulatory aspects of implementing continuous manufacturing specifically for recombinant protein production and biosimilar development, synthesizing validated data from peer-reviewed research, regulatory sources, and global implementation case studies. The analysis demonstrates that continuous manufacturing offers substantial benefits, including a reduced equipment footprint of up to 70%, a 3- to 5-fold increase in volumetric productivity, enhanced product quality consistency, and facility cost reductions of 30–50% compared to traditional batch processes. Leading biomanufacturers across North America, Europe, and the Asia–Pacific region are successfully integrating perfusion upstream processes with connected downstream bioprocesses, enabling the fully end-to-end continuous manufacture of biopharmaceuticals with demonstrated commercial viability. The regulatory framework has been comprehensively established through ICH Q13 guidance and region-specific implementations across the FDA, EMA, PMDA, and emerging market authorities. This review provides a critical analysis of advanced technologies, including single-use perfusion bioreactors, continuous chromatography systems, real-time process analytical technology, and Industry 4.0 integration strategies. The economic modeling presents favorable return-on-investment profiles, accompanied by a detailed analysis of global market dynamics, regional implementation patterns, and supply chain integration opportunities. Full article

Background: Brain health is a growing public health priority due to the high global burden of neurological and mental disorders. Promoting brain health across the lifespan supports individual and societal well-being, creativity, and productivity. Objective: To address the need for specialized education in this field, the University of Bern developed a Certificate of Advanced Studies (CAS) in Brain Health. This article outlines the program’s rationale, structure, and goals. Program Description: The one-year, 15 ECTS-credit program is primarily online and consists of four modules: (1) Introduction to Brain Health, (2) Brain Disorders, (3) Risk Factors, Protective Factors and Interventions, and (4) Brain Health Implementation. It offers a multidisciplinary, interprofessional, life-course approach, integrating theory with practice through case studies and interactive sessions. Designed for healthcare and allied professionals, the CAS equips participants with skills to promote brain health in clinical, research, and public health contexts. Given the shortage of trained professionals in Europe and globally, the program seeks to build a new generation of brain health advocates. It aims to inspire action and initiatives that support the prevention, early detection, and management of brain disorders. Conclusions: The CAS in Brain Health is an innovative educational response to a pressing global need. By fostering interdisciplinary expertise and practical skills, it enhances professional development and supports improved brain health outcomes at individual and population levels. Full article

Aiming to address the problems of asynchronous acquisition time of multiple sensors in the crop phenotype acquisition system and high cost of the acquisition equipment, this paper developed a low-cost crop phenotype synchronous acquisition system based on the PTP synchronization protocol, realizing the synchronous acquisition of three types of crop data: visible light images, thermal infrared images, and laser point clouds. The paper innovatively proposed the Difference Structural Similarity Index Measure (DSSIM) index, combined with statistical indicators (average point number difference, average coordinate error), distribution characteristic indicators (Charm distance), and Hausdorff distance to characterize the stability of the system. After 72 consecutive hours of synchronization testing on the timing boards, it was verified that the root mean square error of the synchronization time for each timing board reached the ns level. The synchronous trigger acquisition time for crop parameters under time synchronization was controlled at the microsecond level. Using pepper as the crop sample, 133 consecutive acquisitions were conducted. The acquisition success rate for the three phenotypic data types of pepper samples was 100%, with a DSSIM of approximately 0.96. The average point number difference and average coordinate error were both about 3%, while the Charm distance and Hausdorff distance were only 1.14 mm and 5 mm. This system can provide hardware support for multi-parameter acquisition and data registration in the fast mobile crop phenotype platform, laying a reliable data foundation for crop growth monitoring, intelligent yield analysis, and prediction. Full article

In the globalizing world, raising individuals equipped with 21st-century skills is very important for the economic development of countries. Educational practices that support 21st-century skills are also gaining importance. In this context, STEM education, an interdisciplinary educational practice that develops 21st-century skills, emerges. STEM education aims to contribute to sustainable development by training individuals equipped with 21st-century skills and competencies. In a globalizing world, countries must set sustainable development goals to gain a foothold in the global market. In today’s world, where artificial intelligence also shows itself in every area of human life, it is possible to discuss the importance of artificial intelligence-supported STEM education. This study aims to reveal the educational needs of primary school teachers regarding artificial intelligence-supported STEM education. The study was conducted according to the phenomenological design, and the data were collected using a semi-structured interview form and literature review techniques. The thematic analysis method was used in the analysis of the data. According to the research results obtained from the findings of the study, teachers need training on 21st-century skills, interdisciplinary thinking, technology integration into courses, and artificial intelligence practices in courses to develop their knowledge and skills in the context of artificial intelligence-supported STEM education. Full article