Search Results (211)

This paper serves as a comprehensive and practical resource to guide researchers in selecting suitable metals for use as photocathodes in radio-frequency (RF) and superconducting radio-frequency (SRF) electron guns. It offers an in-depth review of bulk and thin-film metals commonly employed in many applications. The investigation includes the photoemission, optical, chemical, mechanical, and physical properties of metallic materials used in photocathodes, with a particular focus on key performance parameters such as quantum efficiency, operational lifetime, chemical inertness, thermal emittance, response time, dark current, and work function. In addition to these primary attributes, this study examines essential parameters such as surface roughness, morphology, injector compatibility, manufacturing techniques, and the impact of chemical environmental factors on overall performance. The aim is to provide researchers with detailed insights to make well-informed decisions on materials and device selection. The holistic approach of this work associates, in tabular format, all photo-emissive, optical, mechanical, physical, and chemical properties of bulk and thin-film metallic photocathodes with experimental data, aspiring to provide unique tools for maximizing the effectiveness of laser cleaning treatment. Full article

Friction leads to substantial energy losses and wear in mechanical systems. This study explores the tribological potential of the high-temperature superconductor precursor Y₂BaCuO₅ (Y211), synthesized via chemical co-precipitation, as a novel additive to PAO6 base oil. A 0.3 wt.% Y211/PAO6 lubricant (CD) was formulated using ultrasonic dispersion. Tribological performance was evaluated using a custom end-face tribometer (steel-on-iron) under varying loads (100–500 N) and speeds (300–500 rpm), comparing CD to neat PAO6. The results indicate that the Y211 additive consistently reduced the coefficient of friction (COF) relative to neat PAO6, maintaining a stable value around ~0.1. However, its effectiveness was strongly load-dependent: a significant friction reduction was observed at 100 N, while the benefit diminished at higher loads (>200 N), with the COF peaking around 200 N. Rotational speed exerted minimal influence. Compared with neat PAO6, the inclusion of 0.3 wt.% Y211 resulted in a reduction in the coefficient of friction by approximately 50% under low-load conditions (100 N), with COF values decreasing from 0.1 to 0.045. Wear depth measurements also revealed a reduction of over 30%, supporting the additive’s anti-wear efficacy. Y211 demonstrates potential as a friction-reducing additive, particularly under low loads, but its high-load performance limitations warrant further optimization and mechanistic studies. This highlights a novel tribological application for Y211. The objective of this study is to evaluate the tribological effectiveness of Y₂BaCuO₅ (Y211) as a lubricant additive, investigate its load-dependent friction behavior, and explore its feasibility as a multifunctional additive leveraging its superconductive precursor structure. Full article

Recent achievements in ultrafast spin physics have enabled the use of heterostructures composed of ferromagnetic (FM)/non-magnetic (NM) thin layers for terahertz (THz) generation. The mechanism of THz emission from FM/NM multilayers has been typically ascribed to the inverse spin Hall effect (ISHE). In this work, we probe the mechanism of the ISHE by inserting a second ferromagnetic layer in the form of an alloy between the FM/NM system. In particular, by utilizing the co-sputtering technique, we fabricate Fe/L1₀-FePt/Pt ultra-thin heterostructures. We successfully grow the tetragonal phase of FePt (L1₀-phase) as revealed by X-ray diffraction and reflection techniques. We show the strong magnetic coupling between Fe and L1₀-FePt using magneto-optical and Superconducting Quantum Interference Device (SQUID) magnetometry. Subsequently, by utilizing THz time domain spectroscopy technique, we record the THz emission and thus we the reveal the efficiency of spin-to-charge conversion in Fe/L1₀-FePt/Pt. We establish that Fe/L1₀-FePt/Pt configuration is significantly superior to the Fe/Pt bilayer structure, regarding THz emission amplitude. The unique trilayer structure opens new perspectives in terms of material choices for the future spintronic THz sources. Full article

We present a brief overview of the field of charge density waves (CDW) in condensed systems with focus set to the underlying mechanisms behind the CDW ground state. Our intention in this short review is not to count all related facts from the vast volume of literature about this decades-old and still developing field, but rather to pinpoint the most important, mostly theoretical ones, presenting the development of the field. Starting from the “early days”, mainly based on weakly coupled, chain-like quasi-1D systems and Peierls instability, in which the Fermi surface nesting has been the predominant and practically paradigmatic mechanism of the CDW ground state stabilisation, we track the change in paradigms while entering the field of layered quasi-2D systems, with Fermi surface far away from the nesting regime, in which rather strong, essentially momentum-dependent interactions and particular reconstructions of the Fermi surface become essential. Examples of real quasi-1D materials, such as organic and inorganic conductors like Bechgaard salts or transition metal trichalcogenides and bronzes, in which experiment and theory have been extremely successful in providing detailed understanding, are contrasted to layered quasi-2D materials, such as ${\mathrm{high-T}}_c$ superconducting cuprates, intercalated graphite compounds or transition metal dichalcogenides, for which the theory explaining an onset of the CDWs constitutes a frontier of this fast-evolving field, strongly boosted by development of modern ab initio calculation methods. Full article

Laser ranging technology holds a key position in the military, aerospace, and industrial fields due to its high precision and non-contact measurement characteristics. As a core component, the performance of the photon detector directly determines the ranging accuracy and range. This paper systematically reviews the technological development of photonic detectors for laser ranging, with a focus on analyzing the working principles and performance differences of traditional photodiodes [PN (P-N junction photodiode), PIN (P-intrinsic-N photodiode), and APD (avalanche photodiode)] (such as the high-frequency response characteristics of PIN and the internal gain mechanism of APD), as well as their applications in short- and medium-range scenarios. Additionally, this paper discusses the unique advantages of special structures such as transmitting junction-type and Schottky-type detectors in applications like ultraviolet light detection. This article focuses on photon counting technology, reviewing the technological evolution of photomultiplier tubes (PMTs), single-photon avalanche diodes (SPADs), and superconducting nanowire single-photon detectors (SNSPDs). PMT achieves single-photon detection based on the external photoelectric effect but is limited by volume and anti-interference capability. SPAD achieves sub-decimeter accuracy in 100 km lidars through Geiger mode avalanche doubling, but it faces challenges in dark counting and temperature control. SNSPD, relying on the characteristics of superconducting materials, achieves a detection efficiency of 95% and a dark count rate of less than 1 cps in the 1550 nm band. It has been successfully applied in cutting-edge fields such as 3000 km satellite ranging (with an accuracy of 8 mm) and has broken through the near-infrared bottleneck. This study compares the differences among various detectors in core indicators such as ranging error and spectral response, and looks forward to the future technical paths aimed at improving the resolution of photon numbers and expanding the full-spectrum detection capabilities. It points out that the new generation of detectors represented by SNSPD, through material and process innovations, is promoting laser ranging to leap towards longer distances, higher precision, and wider spectral bands. It has significant application potential in fields such as space debris monitoring. Full article

Transition metal borides have garnered significant research interest due to their versatile properties, including superconductivity and exceptional hardness. This study examines the stable crystal structures of Rhodium-Boron (Rh-B) compounds under high pressure using first-principles structural searching. Beyond the previously known Rh₂B, RhB₂, and RhB₄ phases, three new boron-rich phases—C2/m-RhB₆, Amm2-RhB₆, and Cmca-RhB₈—are identified, each characterized by three-dimensional covalent bonding networks. Their mechanical and thermodynamic stability is validated through elastic property assessments and phonon dispersion calculations. Surprisingly, these phases exhibit low bulk and shear moduli, ruling them out as candidates for hard materials. The metallic character of these borides is evident from their electronic density of states, which exhibits a sharp peak at the E_F-a signature often associated with superconducting systems. Indeed, our calculations predict T_c values of 8.93 K and 9.36 K for Amm2-RhB₆ and Cmca-RhB₈, respectively, at 100 GPa. Full article

It has been theoretically suggested that the de Broglie wavelength of Li ions could become longer than the Li atomic distance in solid electrolytes under coherent acoustic phonons at room temperature when thermal noise is sufficiently suppressed by them. This suggests that some quantum effect of Li ions (not electrons) could appear under this condition, which could possibly result in the superconductivity of ⁶Li⁺ ions (bosons) in solid electrolytes at room temperature. A lower frequency of coherent phonons is better for this possibility. A mechanism for the generation of coherent phonons by repetitive pulsed-laser irradiation or possibly by ultrasound irradiation using a transducer is also discussed. Full article

The Volumetric Neutron Source (VNS) is a pivotal facility proposed for advancing fusion nuclear technology, particularly for the qualification of breeding blanket systems, a key component of DEMO and future fusion reactors. This study focuses on the design and optimisation of the VNS Thermal Shield, adopting a multidisciplinary approach to address its thermal and structural behaviours. The Thermal Shield plays a crucial role in protecting superconducting magnets and other cryogenic components by limiting heat transfer from higher-temperature regions of the tokamak to the cryostat, which operates at temperatures between 4 K and 20 K. To ensure both thermal insulation and structural integrity, multiple design iterations were conducted. These iterations aimed to reduce electromagnetic (EM) forces induced during magnet charge and discharge cycles by introducing strategic cuts and reinforcements in the shield design. The optimisation process included the evaluation of various aluminium alloys and composite materials to achieve a balance between rigidity and weight while maintaining structural integrity under EM and mechanical loads. Additionally, an integrated thermal study was performed to ensure effective temperature management, maintaining the shield at an operational temperature of around 80 K. Cooling channels were incorporated to homogenise temperature distribution, improving thermal stability and reducing thermal gradients. This comprehensive approach demonstrates the viability of advanced material solutions and design strategies for thermal and structural optimisation. The findings reinforce the importance of the VNS as a dedicated platform for testing and validating critical fusion technologies under operationally relevant conditions. Full article

We present a detailed mathematical description, both an analytical model and a numerical simulation, of a physical system based on a superconducting nanoelectromechanical setup that generates nanomechanical cat-states entangled with charge qubit states. The system consists of a superconducting grain in a regime of the Cooper pair box (the charge qubit) that performs mechanical vibrations between two bulk superconductors. Operation of the device is based on the AC Josephson effect, i.e., the phase difference between superconducting electrodes is controlled by a DC bias voltage following the operational switch on/off protocol. We compare an analytical idealised solution with numerical simulation using experimentally feasible parameters, different decoherence processes, as well as imperfections of experimental procedures such as time-control of the bias voltage, to get insight into how they influence the time-evolution of the realistic system, deteriorate the quantum coherence, and affect the formation of the cat-states. Full article

This article demonstrates the concept proof to manufacture parts of MgB₂ by Laser Powder Bed Fusion (L-PBF) coupled to Spark Plasma Sintering (SPS) by an optimization of the L-PBF and SPS conditions to limit the phase degradation and complete the sintering. Optimal L-PBF parameters were identified in order to obtain the material preforms with a minimal degradation of the MgB₂ phase, and then these preforms were sintered by SPS using an inert powder as matrix with a purpose to receive a mechanically more reliable product. Sintered samples show superconductivity state inherent for the raw material and demonstrate superconducting transition around 38 K according to the magnetic moment measurements. Full article

Electrical transport in 2D materials exhibits unique behaviors due to reduced dimensionality, broken symmetries, and quantum confinement. It serves as both a sensitive probe for the emergence of coherent electronic phases and a tool to actively manipulate many-body correlated states. Exploring their interplay and interdependence is crucial but remains underexplored. This review integratively cross-examines the atomic and electronic structures and transport properties of van der Waals-layered crystals ZrTe₃, 2H-TaS₂, and Cr₂Si₂Te₆, providing a comprehensive understanding and uncovering new discoveries and insights. A common observation from these crystals is that modifying the atomic and electronic interface structures of 2D van der Waals interfaces using heteroatoms significantly influences the emergence and stability of coherent phases, as well as phase-sensitive transport responses. In ZrTe₃, substitution and intercalation with Se, Hf, Cu, or Ni at the 2D vdW interface alter phonon–electron coupling, valence states, and the quasi-1D interface Fermi band, affecting the onset of CDW and SC, manifested as resistance upturns and zero-resistance states. We conclude here that these phenomena originate from dopant-induced variations in the lattice spacing of the quasi-1D Te chains of the 2D vdW interface, and propose an unconventional superconducting mechanism driven by valence fluctuations at the van Hove singularity, arising from quasi-1D lattice vibrations. Short-range in-plane electronic heterostructures at the vdW interface of Cr₂Si₂Te₆ result in a narrowed band gap. The sharp increase in in-plane resistance is found to be linked to the emergence and development of out-of-plane ferromagnetism. The insertion of 2D magnetic layers such as Mn, Fe, and Co into the vdW gap of 2H-TaS₂ induces anisotropic magnetism and associated transport responses to magnetic transitions. Overall, 2D vdW interface modification offers control over collective electronic behavior, transport properties, and their interplays, advancing fundamental science and nanoelectronic devices. Full article

A novel instrument was designed and numerically validated for measuring AC losses in ramped superconducting magnets. These power losses are expected to be in the 1 $\mathrm{W}$ to 100 $\mathrm{W}$ range. The instrument improves metrological performance compared to existing instruments by reaching a target power loss uncertainty in the order of $0.1$ watt. This allows accurate measurement of the power losses to improve magnet modeling. A Monte Carlo analysis is used to evaluate the measurement uncertainty. Such an analysis addresses the lack of uncertainty investigation in the literature for this kind of measurement, and the proposed approach can be applied to various magnet models. The physical design of the instrument is carried out by relying on an FPGA-based acquisition platform. Results on a representative case study reveal that the target uncertainty can be reached without any compensation or correction mechanism. Instead, when aiming to use compensation or correction of the inductive magnet voltage, the sensitivity analysis points out that offset errors and time delays must be limited. This also suggests that the magnet’s inductance estimation should be improved more than the metrological performance of the instrumentation. Full article

Elliptical superconducting cavities are widely used in particle accelerators because they can provide stronger acceleration fields than regular cavities. Pre-tuning is required to improve their performance, but the process is time-consuming. This research introduces an automated pre-tuning system for multi-cell elliptical superconducting cavities. This platform integrates three main components: real-time electric field measurements, data analysis based on tuning algorithms, and automated mechanical adjustment systems. During copper cavity tests, the system achieved an electric field flatness of 96.5%. Results show the system can accurately tune cavity frequencies while keeping electric fields uniform. This solves the problem of low efficiency in manual tuning. The new system improves cavity reliability and offers useful solutions for precise tuning needs. It also offers a foundational framework for analogous system development in future projects. Full article

Bilayer graphene exhibits intriguing physical and mechanical properties that are suitable for advanced electronic device applications. By introducing a new degree of freedom through interlayer twisting, exotic phenomena such as superconductivity can arise. However, in practical experiments, manual manipulation is often required to fabricate such a configuration and therefore, scaled production of magic angle bilayer graphene is challenging. In this work, we propose utilizing the grain boundaries and accompanying localized out-of-plane deformation in graphene to facilitate twisted bi-layer graphene formation. Based on molecular dynamics simulations, the structure folding process along the boundary line is examined where a lower energetic cost is found. Once stabilized, the folded bilayer structure shows twist angles that differ visibly from the conventional AA or AB stacking modes and can achieve twist angles close to the 1.1° magic angle. This observation suggests a potential novel strategy for synthesizing stable twisted bilayer graphene or other two dimensional van der Waals heterostructures with greater efficiency. Full article

Superconducting radio-frequency niobium cavities processed using buffered chemical polishing (BCP) sometimes show typical W-shaped pits on their surface, which may greatly limit their performance. However, the causes of such pits and effective solutions are not fully understood. In this study, we reproduced the formation of W-shaped pits on the cavity surface through niobium sample BCP experiments, directly observed the sample surface’s evolution during the polishing process and the polished surface’s morphology, and analyzed the cause of W-shaped pits in detail: the formation and attachment of bubbles on the niobium surface during the BCP process. Then, we systematically investigated the effects of different process parameters on the bubbles and pits, including the acid ratio, temperature, and flow rate. We also investigated how the formation of bubbles and pits was affected by the Nb facing orientation and grain size. This study provides insights into the mechanisms by which bubbles and W-shaped pits are formed on niobium surfaces, and highlights possible directions for reducing pit defects in Nb cavities processed using BCP treatment. Full article