Search Results (41)

During plant development or interactions with pathogens, modifications of the plant cell wall occur. Among the enzymes involved, pectinases, particularly polygalacturonases (PGases), play a crucial role in the controlled hydrolysis of cell wall polysaccharides, leading to the formation of oligogalacturonides (OGs). These pectin-derived fragments act as key elicitors of plant defense responses, stimulating innate immunity and enhancing resistance to pathogens by modulating the expression of genes involved in immune responses and inducing the production of defense compounds. OGs are of particular interest for plant protection as a natural alternative to conventional phytosanitary products as they can be obtained through chemical, thermal, or enzymatic degradation of plant biomass. In a sustainable approach, agricultural by-products rich in pectin, such as citrus peels, apple pomace, or sugar beet pulp, offer an eco-friendly and cost-effective alternative for OG production. Thus, the current review aims to (i) update the state of the art about the different methods used to produce OGs, (ii) explore the potential of OGs as bio-based biocontrol molecules, and (iii) examine the relevance of new pectin sources for OG production. Full article

Sugar beet pulp is a byproduct of white sugar production, and it is quite significant in terms of volume. Every year, tens of millions of tons of beet pulp are produced around the world. However, only a fraction of it is currently used, mainly as animal feed. The composition of beet pulp includes plant polysaccharides, such as cellulose, arabinan, and pectin. Through the process of enzymatic hydrolysis, these polysaccharides are converted into technical C6/C5 sugars, which can be further used as a substrate for the microbial synthesis of various substances, including biofuels, organic acids, and other green chemistry molecules. The current study was designed with a primary objective that focused on the development of a strain that had the potential for enhanced productivity and the capacity to produce enzymes suitable for beet pulp hydrolysis. The pelA and abfA genes, which encode pectin lyase and arabinofuranosidase, respectively, in the fungus Penicillium canescens (VKPM F-178), were cloned and successfully expressed in the recipient strain Penicillium verruculosum B1-537 (VKPM F-3972D). New recombinant strains were created using the expression system of the mycelial fungus P. verruculosum B1-537, which is capable of simultaneously producing pectin lyase and arabinofuranosidase, as well as homologous cellulases. The screening of strains for increased enzymatic activity towards citrus pectin, sugar beet branched arabinan, and microcrystalline cellulose revealed that a B4 clone of P. verruculosum exhibited the greatest potential in sugar beet pulp cake hydrolysis. This clone was selected as the basis for the creation of a new enzyme preparation with enhanced pectin lyase, arabinase, and cellulase activities. The component composition of the enzyme preparation was determined, and the results indicated that the enzyme content comprised approximately 11% pectin lyase, 40% arabinofuranosidase, and 40% cellulases. The primary products of the enzymatic hydrolysis of the unpretreated beet pulp cake were arabinose and glucose. The degree of arabinan and cellulose conversion was observed to be up to 50% and 80%, respectively, after a period of 48 to 72 h of hydrolysis. The new B4 preparation was observed to be highly efficacious in the hydrolysis of beet cake at elevated concentrations of solids (up to 300 g/L) within the reaction mixture. The newly developed strain, as a producer of pectin lyase, arabinofuranosidase, and cellulase complexes, has the potential to be utilized for the bioconversion of sugar beet processing wastes and for the efficient generation of highly concentrated solutions of technical sugars for further implementation in processes of microbial synthesis. Full article

Hydrogels are hydrophilic 3-dimensional networks characterized by the retention of a large amount of water. Because of their water component, hydrogels are a promising method for targeted drug delivery. The water component, or “free volume”, is a potential vehicle for protein drugs. A particularly intriguing hydrogel is pectin. In addition to a generous free volume, pectin has structural characteristics that facilitate hydrogel binding to the glycocalyceal surface of visceral organs. To test drug function and pectin integrity after loading, we compared pectin films from four distinct plant sources: lemon, potato, soybean, and sugar beet. The pectin films were tested for their micromechanical properties and intrinsic antibacterial activity. Lemon pectin films demonstrated the greatest cohesion at 30% water content. Moreover, modest growth inhibition was observed with lemon pectin (p < 0.05). No effective inhibition was observed with soybean, potato, or sugar beet films (p > 0.05). In contrast, lemon pectin films embedded with carbenicillin, chloramphenicol, or kanamycin demonstrated significant bacterial growth inhibition (p < 0.05). The antibacterial activity was similar when the antibiotics were embedded in inert filter disks or pectin disks (p > 0.05). We conclude that lemon pectin films represent a promising structural platform for antibacterial drug delivery. Full article

This research aimed to evaluate the gelation process of ferulated pectin (FP) and ferulated arabinoxylan (AXF) in a new mixed hydrogel and determine its microstructural characteristics. FP from sugar beet (Beta vulgaris) and arabinoxylan from maize (Zea mays) bran were gelled via oxidative coupling using laccase as a crosslinking agent. The dynamic oscillatory rheology of the mixed hydrogel revealed a maximum storage modulus of 768 Pa after 60 min. The scanning electron microscopy images showed that mixed hydrogels possess a microstructure of imperfect honeycomb. The ferulic acid content of the mixed hydrogel was 3.73 mg/g, and ferulic acid dimer 8-5′ was the most abundant. The presence of a trimer was also detected. This study reports the distribution and concentration of ferulic acid dimers, and the rheological and microstructural properties of a mixed hydrogel based on FP and AXF, which has promising features as a new covalent biopolymeric material. Full article

Sugar beet flakes, a by-product of the sugar industry, were used as a source for pectin extraction that was performed using conventional citric acid extraction (CE) and two non-conventional extraction techniques—microwave-assisted extraction (MAE) and pulsed ultrasound-assisted extraction (PUAE). The influence of extraction conditions was studied for each technique based on pectin yield and galacturonic acid content, and spectroscopic, chromatographic and colorimetric methods were used for pectin characterization. Better results for pectin yield were achieved through CE (20.80%), while higher galacturonic acid content was measured in pectin extracted using PUAE (88.53 g/100 g). Pectin extracted using PUAE also presented a higher degree of methylation and acetylation. A significant increase in the molecular weight of pectin was observed for the PUAE process (7.40 × 10⁵ g/mol) by comparison with conventional extraction (1.18 × 10⁵ g/mol). Hydrogels and cryogels prepared with pectin from sugar beet flakes also showed differences in physicochemical parameters determined by the method of pectin extraction. Hydrogels had higher bulk density values irrespective of the pectin extraction method, and overall lower values of the textural parameters. Cryogels prepared with pectin from CE showed higher values of the textural parameters of hardness, adhesiveness, cohesiveness, gumminess and chewiness, while gels obtained with pectin from MAE and PUAE had higher thermal stability. The results of this study prove that sugar beet flakes can be considered a potential source for pectin production, and the extracted pectin is suitable for obtaining hydrogels and cryogels with physicochemical parameters comparable to the commercial citrus and apple pectin available on the market. Full article

Background: The microbial metabolites short-chain fatty acids (SCFAs) are proposed to largely contribute to improvements in metabolic health associated with dietary fiber (saccharolytic) fermentation. Nevertheless, towards the distal colon, fermentable carbohydrates become depleted, and gut bacteria switches towards protein (proteolytic) fermentation. This yields a diversity of metabolites like branched-chain fatty acids (BCFAs), often considered detrimental to metabolic health. We previously demonstrated that acute SCFA administration to the distal, but not the proximal colon, led to beneficial alterations in human substrate and energy metabolism. Hence, we hypothesize that a switch from proteolytic to saccharolytic fermentation in the distal colon has the most pronounced metabolic health effects and aimed to identify a complex carbohydrate mixture capable of inducing such a microbial substrate switch. Methods: The TIM-2 model, an in vitro computer-controlled dynamic model, was used to mimic colonic fermentation, simulating amongst others body temperature, luminal pH, microbial metabolite absorption, and peristalsis. TIM-2 was inoculated with standardized pooled microbiota from individuals with overweight/obesity and disturbed glucose homeostasis. After an overnight adaptation period, pre-digested proteins were added to the model to create a high protein background. Subsequently, either separately or in combination, potato fiber, native inulin from chicory, pectin from sugar beet, or no fibers (protein control) were administered. Samples of the lumen and dialysate were taken at various time points and assessed for proximal (0–8 h) and distal (8–24 h) SCFA and BCFA levels. Results: Of all the tested combinations, combining potato fiber and pectin resulted in the highest distal SCFA production (26.3 vs 6.4 mmol) and SCFA:BCFA ratio (13.3 vs 2.2) compared to the protein control. Discussion: The combination of potato fiber and pectin was best able to increase distal SCFA production in pooled microbiota of individuals who were overweight/obese. To assess whether these results translate to improvements in metabolic health, we are currently conducting a 12-week double-blind placebo-controlled randomized study. 44 individuals who are overweight/obese and have a disturbed glucose homeostasis are randomized to supplementation with a potato fiber/pectin mixture or placebo (maltodextrin) while consuming an eucaloric high protein diet (25 E% protein). The primary outcome will be the change in peripheral insulin sensitivity. Full article

Pectin, a natural biopolymer, can be extracted from food waste biomass, adding value to raw materials. Currently, commercial pectin is mostly extracted from citrus peels (85.5%) and apple pomace (14.0%), with a small segment from sugar beet pulp (0.5%). However, driven by high market demand (expected to reach 2.12 billion by 2030), alternative agro-industrial waste is gaining attention as potential pectin sources. This review summarizes the recent advances in characterizing pectin from both conventional and emerging food waste sources. The focus is the chemical properties that affect their applications, such as the degree of esterification, the neutral sugars’ composition, the molecular weight, the galacturonic acid content, and technological–functional properties. The review also highlights recent updates in nutraceutical and food applications, considering the potential use of pectin as an encapsulating agent for intestinal targeting, a sustainable biopolymer for food packaging, and a functional and emulsifying agent in low-calorie products. It is clear from the considered literature that further studies are needed concerning the complexity of the pectin structure extracted from emerging food waste raw materials, in order to elucidate their most suitable commercial application. Full article

Research on the use of polysaccharides as hydrophobic bioactive carriers instead of proteins is still scarce. Sugar beet pectin (SBP) contains a small amount of protein and is a potential carrier for loading curcumin. In this work, SBP encapsulation, genipin crosslinking, and laccase-induced gelation were used to develop novel jelly food and improve the stability of curcumin without the incorporation of oil. By mixing the SBP solution (40 mg/mL) with curcumin powder (25 mg/mL SBP solution), an SBP–curcumin complex (SBP–Cur) was fabricated with a loading amount of 32 mg/g SBP, and the solubility of curcumin improved 116,000-fold. Fluorescence spectroscopy revealed that hydrophobic interactions drove the complexation of curcumin and SBP. Crosslinked by genipin (10 mM), SBP–Cur showed a dark blue color, and the gel strength of laccase-catalyzed gels was enhanced. Heating and UV radiation tests suggested that the genipin crosslinking and gelation strategies substantially improved the stability of curcumin. Because of the unique UV-blocking capacity of blue pigment, crosslinked samples retained 20% more curcumin than control samples. With the enhanced stability of curcumin, the crosslinked SBP–curcumin complexes could be a functional food ingredient used in functional drinks, baked food, and jelly food. Full article

The production of bioplastics from renewable materials has gained interest in recent years, due to the large accumulation of non-degradable plastic produced in the environment. Here, sugar beet pulp (SBP) is evaluated as a potential raw material for the production of bioplastics such as polylactic acid (PLA) and polyhydroxyalkanoates (PHAs). SBP is a by-product obtained in the sugar industry after sugar extraction from sugar beet, and it is mainly used for animal feed. It has a varied composition consisting mainly of cellulose, hemicellulose and pectin. Thus, it has been used to produce different value-added products such as methane, hydrogen, pectin, simple sugars, ethanol, lactic acid and succinic acid. This review focuses on the different bioprocesses involved in the production of lactic acid and PHAs, both precursors of bioplastics, from sugars derived from SBP. The review, therefore, describes the pretreatments applied to SBP, the conditions most frequently used for the enzymatic hydrolysis of SBP as well as the fermentation processes to obtain LA and PHAs. Full article

The present study aimed to evaluate the capability of persimmon pectin (PP) as a stabilizer for acid milk drinks (AMDs) compared with commercial high-methoxyl pectin (HMP) and sugar beet pectin (SBP). The effectiveness of pectin stabilizers was assessed by analyzing particle size, micromorphology, zeta potential, sedimentation fraction, storage, and physical stability. Results of CLSM images and particle size measurements showed that PP-stabilized AMDs had smaller droplet sizes and more uniform distributions, indicating better stabilization potential compared with the HMP- and SBP-stabilized AMDs. Zeta potential measurements revealed that the addition of PP significantly increased the electrostatic repulsion between particles and prevented aggregation. Moreover, based on the results of Turbiscan and storage stability determination, PP exhibited better physical and storage stability compared with HMP and SBP. The combination of steric repulsion and electrostatic repulsion mechanisms exerted a stabilizing effect on the AMDs prepared from PP. Overall, these findings suggest that PP has promising potential as an AMD stabilizer in the food and beverage industry. Full article

The objective of this study was to explore the structural changes and oxidation resistance of ultrasonic degradation products of sugar beet pectin (SBP). The changes in the structures and antioxidant activity between SBP and its degradation products were compared. As the ultrasonic treatment time increased, the content of α-D-1,4-galacturonic acid (GalA) also increased, to 68.28%. In addition, the neutral sugar (NS) content, esterification degree (DE), particle size, intrinsic viscosity and viscosity-average molecular weight (M_V) of the modified SBP decreased. Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM) were used to study the degradation of the SBP structure after ultrasonication. After ultrasonic treatment, the DPPH and ABTS free radical scavenging activities of the modified SBP reached 67.84% and 54.67% at the concentration of 4 mg/mL, respectively, and the thermal stability of modified SBP was also improved. All of the results indicate that the ultrasonic technology is an environmentally friendly, simple, and effective strategy to improve the antioxidant capacity of SBP. Full article

A bacon-type meat analogue consists of different structural layers, such as textured protein and a fat mimetic. To obtain a coherent and appealing product, a suitable binder must glue those elements together. A mixture based on pea protein and sugar beet pectin (r = 2:1, 25% w/w solids, pH 6) with and without laccase addition and a methylcellulose hydrogel (6% w/w) serving as benchmark were applied as binder between textured protein and a fat mimetic. A tensile strength test, during which the layers were torn apart, was performed to measure the binding ability. The pea protein–sugar beet pectin mixture without laccase was viscoelastic and had medium and low binding strength at 25 °C (F ≤ 3.5 N) and 70 °C (F ≈ 1.0 N), respectively. The addition of laccase solidified the mixture and increased binding strength at 25 °C (F ≥ 4.0 N) and 70 °C (F ≈ 2.0 N), due to covalent bonds within the binder and between the binder and the textured protein or the fat mimetic layers. Generally, the binding strength was higher when two textured protein layers were glued together. The binding properties of methylcellulose hydrogel was low (F ≤ 2.0 N), except when two fat mimetic layers were bound due to hydrophobic interactions becoming dominant. The investigated mixed pectin–pea protein system is able serve as a clean-label binder in bacon-type meat analogues, and the application in other products seems promising. Full article

While sugar beet pectins (SBPs) are well known for effectively stabilizing fine oil droplets in low-fat food and beverages, e.g., low-fat dressings and soft drinks, it often fails in products of higher oil contents. The aim of this study was to improve the emulsifying properties of SBPs and, consequently, their ability to reduce coalescence during high pressure homogenization of products with increased oil content. Therefore, the molecular size of SBPs was reduced by partial cleavage of the homogalacturonan backbone using the enzymes exo- and endo-polygalacturonanase and varying incubation times. The sizes of SBPs were compared based on the molecular size distribution and hydrodynamic diameter. In addition, to obtain information on the interfacial activity and adsorption rate of SBPs, the dynamic interfacial tension was measured by drop profile analysis tensiometry. The (non)modified SBPs were used as emulsifying agents in 30 wt% mct oil–water emulsions stabilized with 0.5 wt% SBP at pH 3, prepared by high-pressure homogenization (400–1000 bar). By analyzing the droplet size distributions, conclusions could be drawn about the coalescence that occurred after droplet breakup. It could be shown that SBPs modified by exo-polygalacturonanase stabilized the oil–water interface more rapidly, resulting in less coalescence and the smallest oil droplets. In contrast, SBPs modified with endo-polygalacturonanase resulted in poorer emulsification properties, and thus larger oil droplets with increasing incubation time. The differences could be attributed to the different cleavage pattern of the enzymes used. The results suggest that a minimum molecular size is required for the stabilization of fine oil droplets with SBPs as emulsifiers. Full article

Bio-based polymer composites find increasing research and industrial interest in different areas of our life. In this study, cellulose nanofibers (CNFs) isolated from sugar beet pulp and nanoemulsion prepared from sugar beet pectin and pomegranate extract (PGE) were used for making films and used as coating with antioxidant and antimicrobial activities for paper. For Pectin/PGE nanoemulsion preparation, different ratios of PGE were mixed with pectin using ultrasonic treatment; the antibacterial properties were evaluated to choose the formula with the adequate antibacterial activity. The antioxidant activity of the nanoemulsion with the highest antimicrobial activity was also evaluated. The nanoemulsion with the optimum antibacterial activity was mixed with different ratios of CNFs. Mechanical, greaseproof, antioxidant activity, and antibacterial properties of the CNFs/Pectin/PGE films were evaluated. Finally, the CNFs/Pectin/PGE formulation with the highest antibacterial activity was tested as a coating material for paper. Mechanical, greaseproof, and air porosity properties, as well as water vapor permeability and migration of the coated layer from paper sheets in different media were evaluated. The results showed promising applicability of the CNFs/Pectin/PGE as films and coating material with antibacterial and antioxidant activities, as well as good stability for packaging aqueous, fatty, and acidic food products. Full article

Although sugar beets are primarily treated as a source of sucrose, due to their rich chemical composition, they can also be a source of other carbohydrates, e.g., mono- and oligosaccharides. The study focused on both fresh beet roots and those stored in mounds. Our studies have shown that, in addition to sucrose, sugar beet tissue also comprises other carbohydrates: kestose (3.39%) and galactose (0.65%) and, in smaller amounts, glucose, trehalose and raffinose. The acidic hydrolysis of the watery carbohydrates extracts resulted in obtaining significant amounts of glucose (8.37%) and arabinose (3.11%) as well as xylose and galactose and, in smaller amounts, mannose. An HPSEC liquid chromatography study of the molecular mass profile of the carbohydrate compounds present in the beet roots showed alongside the highest percentage (96.53–97.43%) of sucrose (0.34 kDa) the presence of pectin compounds from the araban group and arabinoxylooligosaccharides (5–9 kDa) with a percentage share of 0.61 to 1.87%. On the basis of our research, beet roots can be considered a potential source of carbohydrates, such as kestose, which is classified as fructooligosaccharide (FOS). The results of this study may be helpful in evaluating sugar beets as a direct source of various carbohydrates, or as a raw material for the biosynthesis of fructooligosaccharides (FOS) or galactooligosaccharides (GOS). Full article