Search Results (272)

Multifunctional polymer scaffolds with mechanical support, biocompatibility, and antimicrobial activity are key for next-generation biomedical materials. We report the fabrication of electrospun nanocomposite fibers made from polycaprolactone (PCL), starch, and mesoporous aluminum oxide nanoparticles (n-Al₂O₃). Nanoparticles (11 ± 4 nm) were synthesized via a sol-gel method, predominantly comprising γ- and α-Al₂O₃ phases. Four fiber systems were fabricated by side-by-side electrospinning: PCL, PCL/starch, PCL/n-Al₂O₃, and PCL/starch/n-Al₂O₃. SEM analysis confirmed uniform and bead-free fibers in all formulations. Tensile tests showed that the incorporation of starch and nanoparticles improved the mechanical performance compared with neat PCL. In particular, PCL/starch/n-Al₂O₃ fibers exhibited increases of 404% in Young’s modulus and 102% in elongation at break. In PBS, starch and n-Al₂O₃ enhanced hydrophilicity and accelerated weight loss, with PCL/starch/n-Al₂O₃ showing the highest mass loss. Antibacterial tests indicated that only fibers with nanoparticles could inhibit Staphylococcus aureus and Escherichia coli, with PCL/starch/n-Al₂O₃ showing a major effect. Although n-Al₂O₃ increased cytotoxicity toward NIH-3T3, starch mitigated this effect, and the ternary scaffold showed no detectable cytotoxicity. Moreover, PCL/starch/n-Al₂O₃ exhibited non-hemolytic behavior, enhanced fibroblast migration, and wound-healing-related protein expression. Overall, side-by-side electrospun PCL/starch/n-Al₂O₃ scaffold exhibited showed improved mechanical, biological, and antibacterial properties, supporting its potential as a wound-dressing material. Full article

Soil salinity is a major environmental constraint that threatens global food security by significantly inhibiting seed germination and early seedling establishment. Salinity disrupts all three phases of seed germination: Phase I (imbibition), where reduced water absorption capacity reduces seed hydration and delays metabolic reactivation; Phase II (lag phase), where ionic toxicity and oxidative stress impair enzyme activity, reserve mobilization, and cellular metabolism; and Phase III (radicle protrusion), where limited cell division and length prevent radicle emergence and seedling establishment. These disturbances reduce germination percentage, germination rate, germination index, germination energy, and plant vigor, while increasing average germination time. At the morpho-physiological level, salinity impairs water absorption, membrane stability, photosynthetic pigment accumulation, and root–shoot development. Biochemically, excessive accumulation of reactive oxygen species (ROS), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) causes cellular damage and metabolic dysfunction. At the molecular level, salinity alters the expression of the aquaporin gene family (PIPs, TIPs, NIPs, and SIPs), suppresses starch mobilization by reducing α-amylase, enhances abscisic acid (ABA) signaling, and inhibits gibberellic acid (GA) biosynthesis, all of which cause inhibition of germination and early growth. As a result, an effective strategy is needed to improve seed germination under saline conditions. Therefore, the second focus of this review is to critically evaluate the potential of nanoparticles (NPs) and nanobiochar (NBC) as emerging tools to mitigate salinity stress during seed germination. Current evidence suggests that NPs and NBC enhance water absorption, maintain membrane strength, improve nutrient availability, promote antioxidant defense systems, and regulate osmotic adjustment in saline environments. Furthermore, these nanomaterials alter key molecular pathways involved in aquaporin expression, hormonal homeostasis, and reserve mobilization, thereby promoting successful germination and seedling establishment. By combining recent advances in physiological, biochemical, and molecular research, this review provides a comprehensive understanding of salinity-induced germination disruption and highlights the potential of NP- and NBC-based approaches to improve crop establishment under saline conditions. Full article

Iron oxide-based nanomaterials have attracted considerable interest owing to their unique magnetic properties and potential biomedical and environmental applications. In this study, starch-coated superparamagnetic Fe₃O₄ nanoparticles (Sta-MNP) were synthesized and comprehensively characterized using electron microscopy (TEM, SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), and nanoparticle tracking analysis (NTA). The results confirmed the formation of a magnetite-based iron oxide nanoparticles sample with a median physical diameter of 12.24 nm, superparamagnetic behavior with a saturation magnetization of 59.81 emu/g, and effective starch coating on the nanoparticle surface. The biological effects of Sta-MNP were assessed in Triticum aestivum L. using the mitotic index (MI) and aberration index (AI) as cytogenetic endpoints, respectively. Exposure-induced concentration-dependent increases in both parameters across the tested volume fractions (0–200 µL/L), suggesting a significant interaction between Sta-MNP and dividing cells. Overall, this study provides a comprehensive physicochemical profile of starch-coated magnetite nanoparticles and demonstrates their potential cytogenetic impact in a plant model system, supporting further investigation of their environmental interactions and potential agricultural applications. Full article

Salinity is a major factor limiting the increase in crop yield around the world. Wheat starch and straw are important raw materials for producing bioethanol, and their productivity is adversely affected by salinity. Polyacrylic acid-modified Mn₃O₄ nanoparticles (PMO) have been reported to improve crop tolerance to stressors, including salt stress. Therefore, this study aimed to elucidate the mechanism by which seed soaking with PMOs enhances wheat salt tolerance. PMO seed soaking promoted wheat germination (increase of 30.9%) under salt stress, and seedlings treated with PMO seed soaking had a higher fresh weight (increase of 31.4%). PMO seed soaking increased the POD activity (by 31.9%) but decreased superoxide dismutase and catalase activities of wheat seeds and the O₂⁻ and H₂O₂ contents (by 25.0 and 71.4%, respectively). Furthermore, PMO soaking increased the ATP, NADPH, and NADH contents (by 367.6, 212.0, and 283.2%, respectively) by regulating sugar metabolism and enhanced the ascorbic acid–glutathione cycle. Additionally, the PMO soaking treatment optimized energy allocation in wheat under salt stress and increased yield (by 9.7%). PMO modulated sugar metabolism, thereby optimizing energy allocation to plant growth and the antioxidant system, which enhanced wheat germination and yield formation under salt stress. Full article

As the world moves toward a circular bioeconomy, starch nanoparticles (SNPs) have emerged as key components for sustainable development. Traditional production methods have historically relied on harsh acid treatments; however, their substantial environmental footprint has catalyzed a much-needed shift toward “green” chemistry. This review explores the rise of eco-friendly synthesis strategies—including high-power ultrasound, mechanical milling, nanoprecipitation, and enzymatic hydrolysis—and explains how these “clean” methods allow us to precisely define the nanoparticles’ properties. Furthermore, the functional applications of SNPs are analyzed, focusing on their role as reinforcing agents in biodegradable packaging, natural stabilizers in food emulsions, and encapsulation matrices for targeted nutrient delivery. By connecting recent breakthroughs, this work identifies technological synergy, the integration of physical and biological methods, as the most promising route to overcome current yield and scalability limitations. Finally, a future perspective is proposed, focusing on what is needed to move these innovations from the lab to industrial applications, ensuring they are safe, effective, and truly sustainable for the global food sector. Full article

Multilayer packaging—engineered by integrating complementary materials such as plastics, paper, and aluminum—has become a cornerstone technology for enhancing shelf life, minimizing spoilage, and reinforcing the mechanical integrity of packaging formats including films, pouches, and bottles. In this study, a laminate was developed by thermally bonding polylactic acid (PLA) with a poly(butylene adipate-co-terephthalate) (PBAT)/thermoplastic starch (TPS) matrix embedded with silver nanoparticles (Ag-NPs) at 0–3 wt.%. The resulting structures were systematically evaluated for their barrier performance, physicochemical characteristics, and antimicrobial functionality. Fourier-transform infrared (FTIR) spectroscopy confirmed the absence of chemical interactions between Ag-NPs and the polymer matrix, indicating physical dispersion rather than chemical bonding. However, at higher loading (3 wt.%), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) revealed notable nanoparticle aggregation. Functionally, the multilayer films demonstrated markedly improved water vapor barrier properties compared to single-layer PBAT/TPS films. Migration studies showed that silver release increased with nanoparticle concentration and was significantly enhanced under acidic conditions relative to distilled water. Importantly, Ag-NP-incorporated laminates exhibited pronounced antibacterial activity against Staphylococcus aureus. Collectively, these findings highlight the potential of Ag-NP-enriched, starch-based multilayer laminates as next-generation active packaging systems that combine with effective microbial control. Full article

Ginger possesses both significant edible and medicinal value. Sprouting of ginger is a critical phase that influences the yield and quality of the crop. While silica nanoparticles (SiNPs) are known to promote the growth of ginger, their impact on sprouting remains unclear. The results show that sprouting 100 mg L⁻¹ SiNPs (SiNP100) significantly improved ginger sprouting rate and respiratory intensity while reducing weight loss. It also elevated fructose, sucrose, and glucose contents, as well as sucrose phosphate synthase (SPS), sucrose synthase (SS), neutral invertase (NI), acid invertase (AI) activities, indicating that SiNP100 is associated with enhanced sprouting by modulating sugar metabolism. Concurrently, starch content decreased and α- and β-amylase activities increased. Hormonal profiling showed that SiNP100 increased auxin (IAA), trans-zeatin (TZR), isoamylalkenyladenin (IP), and gibberellic acid (GA₃) levels, while decreasing abscisic acid (ABA), further supporting its role in promoting sprouting. RNA-seq and RT-qPCR validated that SiNP100 significantly enriched the plant hormone signal transduction and starch and sucrose metabolism pathways, upregulating genes related to sugar transport and metabolism (ZoSweet7, ZoSSIVa, ZoSPS1, and ZoSUS5). Field trials over two consecutive years confirmed that SiNP100 application improved ginger growth, photosynthesis, antioxidant capacity, and ultimately yield and quality. This study demonstrated the potential of SiNPs to improve seed sprouting and promote ginger growth under field conditions. Full article

Two hemostatic bionanocomposite dressings were developed using natural, semi-natural (or semi-synthetic) and synthetic polymers. The first system consisted of chitosan (CS), polyvinyl alcohol (PVA), and carboxymethyl cellulose (CMC) (CS/PVA/CMC), while the second was based on CS, PVA, and starch (SR) (CS/PVA/SR). Zinc oxide (ZnO) nanoparticles and bicyclic monoterpene camphor (CP) ketone were incorporated as bioactive agents in order to enhance antimicrobial and hemostatic performance. FTIR spectroscopy confirmed the successful solvent casting synthesis of the dressings and the interactions between the biopolymers and additives. XRD analysis indicated a predominantly amorphous structure, while SEM images and EDS analysis revealed uniform dispersion of ZnO particles within the polymer matrices without aggregation. Furthermore, the CS/PVA/CMC-1ZnO/CP sample exhibited a water sorption of 12,666 ± 126%, while CS/PVA/SR-1ZnO/CP reached 7013 ± 215%. ZnO incorporation also improved mechanical performance, with CS/PVA/SR-2ZnO/CP displaying the highest tensile strength (39.18 ± 0.2 MPa) and elongation at break (9.54 ± 1.04%). ZnO incorporation also led to a concentration-dependent increase in antibacterial activity, with SR-based dressings achieving near-complete bacterial reduction at higher ZnO loadings. All the dressings demonstrated good biocompatibility, while CS/PVA/SR-1ZnOCP showed the fastest clotting time (420 s ± 40), highlighting its potential for hemostatic applications. Full article

Naked oat (Avena nuda L.) is an important dual-purpose crop for grain and forage in cold regions; however, its high fatty acid content renders seeds prone to deterioration during storage. This study aimed to investigate the protective effects of zinc oxide nanoparticles (ZnO NPs) on artificially aged naked oat seeds and elucidate the underlying molecular mechanisms. Non-aged seeds (Naged) were subjected to artificial aging at 45 °C and 100% relative humidity for 24 h (Aged), followed by priming with 30 mg L⁻¹ ZnO NPs for 6 h (Daged). Antioxidant enzyme activities were determined spectrophotometrically, and transcriptome sequencing was performed on an Illumina platform to identify differentially expressed genes (DEGs) and enriched pathways. We found that ZnO NPs increased catalase (CAT), peroxidase (POD) and superoxide dismutase (SOD) activities by 3–4-fold, restored germination rate from 75% to 98%, and enhanced seed vigor index. A total of 21,403 DEGs were detected, with 15,841 stably expressed in response to nano-priming. Reactive oxygen species (ROS) burst rapidly induced up-regulation of AP2/EREBP transcription factor family members, which subsequently activated antioxidant enzyme genes to maintain cellular redox homeostasis. Metabolic pathway analysis demonstrated that the phenylpropanoid pathway was reprogrammed, characterized by down-regulated lignin biosynthesis and up-regulated flavonoid production, thereby enhancing ROS scavenging capacity. Additionally, the pentose phosphate pathway was activated to provide additional NADPH for antioxidant defense, and up-regulated ADP-glucose pyrophosphorylase (AGPase) facilitated starch accumulation. Notably, the 40S ribosomal protein S13 exhibited the highest connectivity in protein–protein interaction networks, was up-regulated 2.1-fold, and was enriched in post-translational modification processes. These findings suggest that nano-priming with ZnO NPs represents a promising biotechnological strategy for enhancing seed vigor and storability in naked oat, with potential applications in sustainable agriculture and the seed industry. Full article

Children are often underserved by adult-oriented oral medicines, leading to off-label use and dosage-form manipulation that may compromise dosing accuracy. This review summarises recent advances in paediatric orodispersible tablets (ODTs), focusing on manufacturing technologies, superdisintegrants, taste masking, and in vitro disintegration testing. Following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidance and a protocol registered with the International Platform of Registered Systematic Review and Meta-analysis Protocols (registration number INPLASY2025110022), we searched PubMed, EMBASE, MEDLINE, Scopus, and Google Scholar for experimental studies on paediatric-relevant ODT formulation and evaluation. Two reviewers screened studies and extracted data on manufacturing methods, excipients, disintegration/dissolution testing, and key outcomes. Risk of bias was assessed using a six-domain framework. Overall, 65 studies met the inclusion criteria for this review. Direct compression was the dominant method, with freeze-drying, sublimation, spray-drying, nanoparticle-in-tablet systems, and semi-solid extrusion/3D printing also reported. Crospovidone, croscarmellose sodium, and sodium starch glycolate were the most common superdisintegrants, while natural and co-processed disintegrants showed promise as cost-effective alternatives. Disintegration was usually assessed using pharmacopoeial methods, with some modified set-ups to better simulate oral conditions. Paediatric ODT development is advancing rapidly. Broader translation requires harmonised disintegration testing, age-stratified acceptability reporting, and GMP-ready workflows, alongside benchmarking of superdisintegrants and attention to dose flexibility, packaging, and affordability. Full article

Plantain (Musa paradisiaca) peel is an agro-industrial waste product with remarkable functional potential, attributed to its composition of bioactive compounds with antioxidant and antimicrobial properties. Given this scenario, this scoping review aimed to map and synthesize the scientific evidence regarding the nutritional composition and potential functionalities of plantain peel. A scoping review approach was used, and data were reported using the PRISMA-ScR checklist. The studies evaluating the use of plantain peel were included without restrictions on language or publication date. The following databases were searched: Embase, MEDLINE (via PubMed), Scopus, and Web of Science. Additional searches were conducted through Google Scholar. The protocol has been registered prospectively on the Open Science Framework. This review’s findings included 53 studies. All of them presented methodological limitations that hindered further analysis and the generation of robust evidence. This analysis detailed the chemical composition of the peel, showing that it varies with ripeness stage and processing and is an excellent source of fiber and minerals. Several technological applications are explored, including the use of peel in the production of functional foods, the development of nanoparticles with antimicrobial activity, and its use as a substrate for the biosynthesis of industrial enzymes and citric acid. This review also addresses the possible health benefits that have already been studied in animal and in vitro models. Plantain peel is a promising agro-industrial by-product with high fiber, starch, and bioactive compound content and functional properties. Despite advances, challenges in sensory acceptance and process standardization limit industrial application. A key research gap remains in the systematic evaluation of antinutrient reduction (e.g., oxalates, phytates) and pesticide residue levels during the processing of plantain peel, a mandatory step before its widespread application in the food industry (e.g., flours and food additives). Further research on optimization and bioactive mechanisms is essential to enable its large-scale use and strengthen its role in the circular bioeconomy and human health. Full article

Background/Objectives: Cannabidiol is a non-psychoactive substance that possesses properties suitable for the treatment of several disorders related to the central nervous system. However, successful administration of cannabidiol remains challenging due to low and variable bioavailability and potential adverse effects. Intranasal delivery of cannabidiol may help overcome these limitations, but the pharmacokinetics of such administration has not been fully established. Methods: Starch-based cannabidiol-loaded nanoparticles were used as carriers and were administered to rats via the intranasal route. Cannabidiol levels in plasma and the brain were examined at different time points and compared to cannabidiol levels in plasma and the brain following intravenous administration of cannabidiol solution for injection. Pharmacokinetic parameters were calculated for each delivery route, and a pharmacokinetic model was fitted for the intranasal administration. Results: Intranasal administration resulted in a bioavailability of 47.9%. Systemic absorption accounted for 44% of the absorbed drug, while 56% was absorbed by direct brain entry. Intranasal administration resulted in rapid brain penetration with a brain t_max of 10 min and demonstrated a brain bioavailability of 28.5% compared to bioavailability after intravenous bolus injection of cannabidiol solution. Conclusions: Intranasal administration of cannabidiol-loaded nanoparticles was found to be effective for the delivery of cannabidiol to the brain with significantly lower systemic exposure compared to intravenous administration. A proposed pharmacokinetic model was found to be appropriate in describing and predicting the disposition pathways following intranasal administration, especially when designing drug delivery systems for brain targeting. Full article

Copper-based nanoparticles (Cu-based NPs) represent a major focus in nanomedicine due to their unique physicochemical properties and excellent biocompatibility. In this paper, we present an interdisciplinary study bridging engineering and biomedical sciences by employing a novel synthesis approach to produce highly stable and uniformly dispersed spherical copper nanoparticles (CuNPs), which were subsequently tested for their cytotoxic effects on SKBR3 and MSC human cells. The synthesis of CuNPs was performed in the presence of the complexing agent trisodium citrate (TSC), while starch was used for the chemical reduction step. Characterization of the Cu-based NPs via UV–Vis, FT-IR, Mie theory, DLS and SEM confirmed their nanoscale structure. The obtained CuNPs were subsequently assessed for their biological effects and cytotoxic responses induced in normal and SKBR3 cancer cell lines. The SKBR3 cell line showed a dose-dependent decrease in the cell index and a higher proportion of apoptotic cells compared to normal MSCs, with apoptosis representing the dominant mode of cell death. Although SKBR3 cells appeared to mount an antioxidant response against CuNP oxidative stress, the response was insufficient to counteract the apoptotic progression. In comparison, MSCs showed a greater resilience to CuNP-induced cellular stress. By promoting oxidative stress and disrupting the antioxidant defense system of cancer cells, CuNPs exhibit promising anti-cancer properties. Full article

The fabrication of sustainable packaging films based on chitosan/starch (CTS/Starch) blends, reinforced with Chitosan Nanoparticles (CNPs), was achieved via the casting blend technique. This research explored the impact of varying CNPs loading on critical physicochemical properties, including water vapor permeation (WVP), thermal stability, and mechanical strength. To elucidate the structural and chemical complexities of the blend films, surface morphology was investigated via Scanning Electron Microscopy (SEM), internal architecture was visualized using Transmission Electron Microscopy (TEM), and molecular interactions were probed through Fourier Transform Infrared (FTIR) spectroscopy. The reduction in WVP from 6.18 ± 0.54 to 5.38 ± 0.93 g.m⁻¹.s⁻¹.pa⁻¹, equilibrium moisture content (EMC) from 16.52 ± 1.03% to 12.5 ± 1.05%, and water absorbency (WA) from 340 ± 1.63% to 88.65 ± 1.12% in CTS/Starch blend films demonstrated loaded with (0–8 wt%) CNPs loading. Concurrently, films with 2–8 wt% CNP loading exhibited an increase in opacity from 2.38 ± 1.01 mm⁻¹ to 4.83 ± 0.83 mm⁻¹, accompanied by a decrease in transmittance from 89.20 ± 0.50% to 79.70 ± 1.20%. These findings collectively indicated that the CNP-incorporated chitosan/starch composites offer enhanced ultraviolet light shielding and improved water barrier capabilities compared to the non-reinforced chitosan/starch films, underscoring their promising utility in food and pharmaceutical packaging applications. Full article