Search Results (5,762)

The detection and monitoring of asbestos–cement roofing remain a critical public health and environmental challenge, especially in urban and suburban areas where asbestos-containing materials are still widespread due to their extensive use in the 20th century. Although hyperspectral and high-resolution multispectral remote sensing have proven effective for mapping asbestos–cement roofs, many existing approaches rely on proprietary software, limiting transparency, reproducibility, and large-scale adoption. This study presents a fully reproducible, cost-free Python-based workflow for the detection and temporal monitoring of asbestos–cement roofing using high-resolution multispectral WorldView-3 imagery. The workflow integrates atmospheric correction (using the Py6S radiative transfer model), spatial preprocessing, supervised pixel-based classification, postprocessing, and building-level aggregation within an open framework. A Maximum Likelihood Classifier is applied to VNIR and SWIR data using empirically defined roof typologies to enhance class separability. Pixel-level results are aggregated to the building scale through adaptive thresholding enabling the translation of spectral classifications into meaningful building-level information. Tested over the city of Mantua (Italy), the approach achieved reliable classification performance and enabled multi-temporal comparison to identify changes potentially due to roof remediation. Evaluation metrics (precision, recall, and F1-score) highlight the importance of carefully choosing the building-level threshold. By relying exclusively on open-source tools, the workflow enhances transparency, reproducibility, and scalability for long-term monitoring. Full article

Mangrove represent vital coastal ecosystems that contribute to shoreline stabilization, ecological balance, and environmental management. Nevertheless, the precise delineation of mangrove regions using remote sensing data is often impeded by spectral similarities with intertidal mudflats and aquatic features, alongside the irregular spatial patterns and intricate margins of mangrove stands. This research utilizes high-resolution Gaofen-6 (GF-6) satellite observations as the foundational data to develop Triplet Axial High-Resolution Network (TAHRNet), a semantic segmentation architecture derived from the High-Resolution Network with Object-Contextual Representations (HRNet-OCR) framework for mangrove identification. The model integrates a Triplet Attention module to facilitate cross-dimensional feature dependencies and an improved Multi-Head Sequential Axial Attention mechanism to capture long-range spatial context while maintaining structural consistency. Based on evaluations using the test dataset, TAHRNet yielded a Mean Intersection over Union (MIoU) of 92.01% and a Overall Accuracy of 96.38%. Relative to U-Net and SegFormer, the proposed approach showed MIoU improvements of 5.25% and 1.88%, with corresponding Accuracy gains of 2.68% and 0.94%. Further application to coastal mapping in Zhanjiang produced results that align with manual visual interpretation. These findings suggest that TAHRNet is a viable tool for mangrove extraction and can provide technical support for coastal monitoring and ecological analysis. Full article

Estimating forest aboveground biomass (AGB) in mountainous forest ecosystems remains a significant challenge due to complex terrain, the high cost and limited applicability of traditional field-based methods. To address this issue, a remote sensing-based AGB estimation framework integrating intelligent optimization and machine learning was developed for Mount Tai in eastern China. Sentinel-2 multispectral data were selected to derive 105 candidate variables, including spectral bands, vegetation indices, texture features, and topographic factors, from which 17 key variables were selected using Pearson correlation analysis for model construction. A Support Vector Machine (SVM) optimized by the Pigeon-inspired optimization (PIO) algorithm was developed to adaptively determine optimal hyperparameters, and its performance was compared with that of Random Forest (RF) and standard SVM models. Among the three models, PIO-SVM produced the highest numerical accuracy. For the training dataset, it obtained an R² of 0.85 and an RMSE of 46.12 t/hm². For the testing dataset, it achieved an R² of 0.73 and an RMSE of 62.19 t/hm², compared with 0.72 and 66.25 t/hm² for the standard SVM model and 0.70 and 65.19 t/hm² for the RF model. The spatial distribution of AGB derived from the optimal model shows higher AGB values in the central and northern regions characterized by dense forest cover, in close agreement with field observations. Overall, the results suggest that PIO-based parameter optimization can improve SVM performance for AGB estimation in mountainous forests. This study provides a reliable and efficient framework for regional-scale monitoring of forest biomass and carbon sink dynamics. Full article

Surface and interface engineering has become a decisive factor in determining the performance and reliability of integrated photonic sensors. As photonic device architectures advance and geometric optimization strategies approach their fundamental performance limits, the nanoscale interface region where confined optical modes interact with the surrounding environment progressively becomes the dominant factor governing sensitivity, noise characteristics, and long-term operational stability. This review critically examines recent advances in these strategies applied to integrated photonic sensing platforms, including waveguide, interferometric, and resonant architectures. Emphasis is placed on how functional layers, nanomaterials, and hybrid interfaces modify light–matter interactions, while simultaneously introducing optical loss, spectral distortion, and stability constraints. Beyond summarizing reported sensitivity enhancements, this review analyzes performance benchmarking methodologies and highlights the limitations of conventional metrics such as bulk sensitivity and nominal limit of detection. Normalized figures of merit are discussed as essential tools for isolating genuine interface contributions across diverse platforms. Experimentally documented trade-offs between enhanced surface interaction, optical degradation, and temporal drift are examined in detail, alongside challenges related to reproducibility, wafer-scale variability, and long-term interface stability. By synthesizing insights from photonics, surface chemistry, and materials science, this review outlines key open questions and identifies design principles necessary for translating surface-engineered photonic sensors from laboratory demonstrations to robust and scalable sensing technologies. Full article

Amplified Spontaneous Emission (ASE) sources are widely employed as highly stable broadband sources in fields such as high-precision navigation and optical detection. Erbium-doped fiber (EDF), as the core active component in ASE sources, has long been a key subject of thermal stability research. We fabricated a low-doped EDF with an 80 μm-cladding using the vapor phase doping (VPD) technique. This EDF was compared with a commercial 125 μm-cladding EDF using a double-pass forward (DPF) optical path configuration with a narrowband filter. We investigated the temperature-dependent characteristics of the ASE spectra generated by the two EDFs with different parameters. The temperature drift performance of the two EDFs was analyzed based on three critical indicators of the spectrum: mean wavelength, spectral bandwidth, and output power. In comparison with the commonly used EDF, the results show that a properly designed small-cladding EDF with an appropriate length can deliver higher ASE output power and exhibit a lower mean-wavelength temperature drift. This study provides an important guideline for promoting the miniaturization of high-precision fiber-optic sensing devices. Full article

Sea ice classification is of fundamental importance for polar monitoring and global climate research. Global Navigation Satellite System Reflectometry (GNSS-R) has emerged as a frontier technology in polar remote sensing due to its high spatiotemporal resolution and cost-effectiveness. Based on BeiDou System Reflectometry (BDS-R) data acquired from the Fengyun-3E (FY-3E) satellite, this study introduces a classification approach that integrates multi-dimensional sea ice information. A comprehensive feature set was constructed by integrating the Spectral Entropy (SE) of the Normalized Integrated Delay Waveform (NIDW) First-order Differential Curve to characterize the oscillatory complexity of the trailing edge power decay process as a scattering dynamic property, the Root Mean Square height (RMS) to characterize the attenuation magnitude of scattering intensity arising from surface roughness and related factors as a scattering intensity attenuation property, and salinity (S) and L-band brightness temperature (TB) data from SMOS to describe dielectric and radiative properties. These novel features are combined with traditional GNSS-R features. After selecting the optimal feature set via an ablation study, the features were used to train a Random Forest (RF) classifier for sea ice classification. Validated against Ocean and Sea Ice Satellite Application Facility (OSI SAF) sea ice type products, the proposed method yielded an overall accuracy of 93.86% and a Kappa coefficient of 0.8061. The integration of multi-dimensional features notably improved the identification of Multi-Year Ice (MYI), achieving a Recall of 85.11% and an F1-score of 84.43%. These results indicate that the proposed multi-dimensional feature set provides an effective solution for GNSS-R-based sea ice classification. Full article

Spectral remote sensing enables efficient acquisition of large-scale land surface information and is a key approach for monitoring soil salinity content (SSC). However, surface mulching significantly alters the spectral reflectance responses of croplands, increasing the uncertainty of SSC retrieval using remote sensing. This study aimed to systematically identify SSC-sensitive spectral features under different mulching conditions and to evaluate the effects of spatial resolution on SSC–spectral relationships. Multi-resolution datasets were constructed based on plastic mulch geometric parameters, and SSC–spectral relationships were analyzed using correlation methods and recursive feature elimination (RFE). Results indicate that under near-ground ultra-high-resolution conditions, the correlation between inter-mulch bare soil spectral features and SSC was weakly influenced by mulch type, and distinguishing mulch types provides limited improvement in inter-variable relationships. Pearson’s r exceeded 0.40 for both white- and black-mulched samples, and distinguishing mulch types provided only marginal gains in model accuracy (RFR–RFE R² = 0.9524 for white-mulched and 0.9252 without distinguishing; R² = 0.9387 for black-mulched). In contrast, under multi-resolution settings at the field scale, separating black-mulched, white-mulched, and non-mulched fields significantly enhanced the correlation between spectral indices (SIs) and SSC, with the coefficient of determination (R²) based on the recursive feature elimination (RFE) algorithm increasing by up to 0.28. The highly sensitive SIs of non-mulched farmland are generally consistent with those of white-mulched farmland but differ markedly from those of black-mulched farmland. Scale optimization analysis further indicated that the optimal spatial resolution was 1.35 m for white-mulched and non-mulched farmland. Black-mulched farmland performed best at 5.4 m, likely because stronger spectral masking by black mulch increases mixed-pixel dominance and benefits from spatial aggregation. These findings provide methodological guidance and practical approaches to accurately retrieve SSC in plastic-mulched croplands and to determine the optimal image spatial resolution. Full article

Urban agriculture plays a critical yet increasingly complex role in sustainable urban development, especially in high-density regions undergoing rapid transformation. Accurate mapping of its spatial distribution and functional composition remains a methodological challenge due to its fragmented landscape, small plot sizes, and multifunctional nature. This study addresses this gap by developing and applying a novel hierarchical classification framework that integrates agricultural land cover types with key socio-economic functions to map urban agriculture in the Pearl River Delta (PRD), China. This framework is structured around agricultural land categories (i.e., cropland, garden, forest, grass, and water body) and further delineated by two primary production functions, planting and breeding, with a third functional dimension, leisure activities, proposed as a conceptual extension for future research. Using unmanned aerial vehicle (UAV) imagery and high-resolution satellite data, we constructed a spatial sample database for urban agriculture. The random forest algorithm was applied to classify urban agriculture with Gaofen-2 imagery, generating detailed spatial distribution maps across the study area, with consistently reliable overall accuracy (79.07–81.82%), though this may be slightly optimistic due to potential spatial autocorrelation between training and testing samples. While the framework performed exceptionally well for spectrally and spatially distinct classes such as water bodies and perennial plantations, challenges remained in discriminating among annual field crops due to spectral similarity. These findings underscore the potential of integrating multi-temporal remote sensing data to capture phenological variations for improved classification. This study provides a replicable, functionally informed mapping approach that not only advances the methodological toolkit for urban agriculture characterization but also offers a valuable evidence base for land use planning, agricultural policy, and sustainable urban development in rapidly urbanizing regions. Full article

Accurate permittivity characterization at terahertz frequencies is important for material analysis and device design, yet it remains challenging for small-volume samples and compact test structures. In this work, a terahertz permittivity sensor based on a spoof surface plasmon polariton (SSPPs) transmission line coupled to a backside split-ring resonator (SRR) is proposed and numerically studied. The SSPPs line is patterned on the top side of the substrate, while the SRR is etched on the backside, with the sample loaded into the SRR gap. The SSPPs mode penetrates through the substrate and excites the SRR, producing a pronounced transmission notch. Changes in the sample permittivity modulate the effective capacitance of the resonator, resulting in a monotonic shift in the notch center frequency. For relative permittivities from 1 to 8, the notch center frequency decreases from 152.1 GHz to 117.8 GHz, corresponding to a total shift of 34.3 GHz and an average sensitivity of about 4.90 GHz/ε_r. The minimum S₂₁ remains within approximately −23.80 to −21.56 dB, while the Q-factor stays in the range of 94.33–108.23, indicating good spectral readability. Tolerance analysis further shows that the resonance frequency is sensitive to critical structural dimensions and layer alignment, and practical implementation is therefore more suitable for single-device calibrated frequency-shift sensing. These results demonstrate the feasibility of the proposed dual-layer SSPPs–SRR configuration for compact permittivity sensing in the terahertz regime. Full article

In the fields of atomic physics, quantum sensing, and precision measurement, 852 nm lasers are essential for the resonant excitation and manipulation of the cesium (Cs) D₂ transition ($6S_{1/2}\to 6P_{3/2}$). While significant global progress has been made in developing 852 nm laser based on distributed feedback (DFB) lasers and external cavity diode lasers (ECDL), the burgeoning demand for portable and integrated quantum instruments imposes stringent requirements on miniaturization and long-term, maintenance-free operation. To address the challenge of mode competition in Faraday lasers, this work demonstrates a frequency-stabilized semiconductor laser based on an atomic frequency-selective architecture. By utilizing a customized Faraday Anomalous Dispersion Optical Filter (FADOF) for frequency selection, the laser wavelength automatically corresponds to the Cs 852 nm D₂ transition, offering “Plug-and-play” operation. To further enhance integration, we propose and demonstrate a miniaturized Faraday laser architecture that resolves the instability caused by the mismatch between the FADOF transmission bandwidth and the free spectral range (FSR) of the external cavity. By employing a 7000 Gs magnetic field, the FADOF bandwidth is actively broadened to ∼15 GHz, while the cavity length is concurrently compressed to 30 mm to maximize FSR to effectively suppressing unstable mode competition. The resulting laser achieves a highly compact dimension of $102\times 109\times 96{\mathrm{mm}}^3$. Performance testing demonstrates a Lorentzian fitted linewidth of $16.4\mathrm{kHz}$ and a 1-s frequency stability of $3.05\times {10}^{-13}$ after modulation transfer spectroscopy (MTS)-based frequency locking. This robust and autonomous 852 nm laser source provides a critical technological foundation for the miniaturization of high-performance quantum sensors. Full article

Carotid artery disease, including atherosclerotic stenosis and non-atherosclerotic abnormalities, substantially increases ischemic stroke risk and motivates accessible tools for early screening. Current diagnostic pathways rely on clinic-based imaging and skilled operators, creating barriers to frequent monitoring and scalable deployment. We present a non-invasive diagnostic approach using a wearable MEMS accelerometer patch to capture mechano-acoustic vibrations generated by carotid blood flow at the neck. The miniature device integrates a hermetically sealed wideband accelerometer with out-of-plane sensitivity and micro-g resolution to detect subtle flow-induced vibrations. We validated the approach in a carotid flow phantom and a clinical study of 74 patients. Time–frequency representations were computed using the continuous wavelet transform (CWT), from which interpretable spectral and scalogram-derived candidate biomarkers were extracted. Six non-redundant features were then selected for multivariate classification, distinguishing pathology, defined as 50% or greater stenosis or a non-atherosclerotic abnormality, from non-pathology, defined as less than 50% stenosis. Finally, model interpretability was assessed using SHapley Additive exPlanations (SHAP) to quantify the contribution of each biomarker to predicted disease probability. These findings resulted in an AUROC of 0.97 and AUPR of 0.947, with 81.7% sensitivity and 93.6% specificity at the prespecified threshold (precision 85.4%, F1 83.5%, accuracy 89.8%), highlighting the potential of wearable seismic sensing combined with interpretable machine learning for fast screening and longitudinal monitoring of the right and left carotid arteries. Full article

Spectral interrogation of fiber Bragg gratings (FBGs) in the ~850 nm band remains relatively uncommon, largely due to the limited availability of commercial instruments and the restricted applicability of conventional interrogation schemes in this wavelength range. This work presents a practical and high-precision wavelength demodulation method for 850 nm FBG sensing based on an imaging Charge-Coupled Device (CCD) spectrometer. A Czerny–Turner (C–T) optical configuration is employed for spatial spectral dispersion, and the optical system is theoretically analyzed and optimized using ZEMAX to balance spectral resolution, optical throughput, and compactness. A polynomial wavelength–pixel calibration model is established, and Gaussian fitting is adopted for robust peak-position extraction under multimode fiber conditions. Experimental validation is carried out using four serially cascaded FBGs distributed over 830–880 nm. The wavelength–pixel calibration yields an RMS residual of 0.46 nm. Within a strain range of 0–2000 με, the average wavelength demodulation bias of a single FBG is 6.8 pm, with a wavelength demodulation RMS error of 86.9 pm and a measured strain sensitivity of 0.72 pm/με. The results demonstrate that the proposed CCD-based imaging interrogation scheme is feasible for 850 nm FBG sensing and enables accurate wavelength demodulation in this relatively underexplored band. Since the system is implemented using standard off-the-shelf components, it also provides a practical technical route for the deployment of FBG sensing systems in engineering applications. Full article

For studies utilizing methods such as water color parameter inversion and algal bloom classification, abundant spectral bands and high spectral resolution are of great significance. However, for multispectral satellite sensors that are not designed for water color studies (e.g., Sentinel-2 MSI), the number of bands in the visible–near-infrared range is limited, and lacks specific spectral bands with rich spectral information. Hyperspectral reconstruction of multispectral data based on hyperspectral remote sensing reflectance ($R_{rs}$) databases and machine learning algorithms have been proven to be a feasible solution. Based on the in situ measured $R_{rs}$ data, this study constructed a large-sample hyperspectral $R_{rs}$ database covering various optical water types using two Chinese hyperspectral satellites, and compared the spectral reconstruction accuracy of six machine learning algorithms. The results show that expanding the $R_{rs}$ database for model training by integrating hyperspectral satellite data can effectively improve the reconstruction accuracy in waters of different optical types. Comparisons with in situ measured hyperspectral $R_{rs}$ indicate that the reconstructed Sentinel-2 hyperspectral data achieve high accuracy, with the Spectral Angle Mapper (SAM) less than 5° and the correlation coefficient ($r$) higher than 0.7. Furthermore, the reconstructed data can effectively restore spectral information not captured by the original multispectral data, such as the suspended sediment $R_{rs}$ peak at 580 nm and the chlorophyll $R_{rs}$ valley at 680 nm. Through spectral reconstruction, the spectral resolution of Sentinel-2 can be maximized while retaining its advantages of fast revisit capability and high spatial resolution, thereby expanding its application potential in water color remote sensing. Full article

Object detection in optical remote sensing imagery has emerged as a crucial task in computer vision, with applications ranging between environmental monitoring to disaster management, precision agriculture, and urban planning. This review systematically examines current methodologies, categorising them into four principal approaches: (1) template matching-based methods, which leverage predefined patterns for object identification; (2) knowledge-based methods, which incorporate geometric and contextual information to enhance detection accuracy; (3) object-based image analysis (OBIA), which segments images into meaningful objects using spectral and spatial properties; (4) machine learning-based methods, particularly deep convolutional neural networks (CNNs), which have revolutionised the field through automatic feature learning. Each methodology’s performance characteristics, computational requirements, and suitability for different remote sensing applications are analysed. Our systematic review, following PRISMA guidelines, analysed 189 studies published from 2010 to 2025, of which 73 provided quantitative results on standard benchmarks. The three most critical challenges identified are as follows: (1) annotation bottleneck, as dense bounding box labelling of remote sensing imagery remains highly labour-intensive for deep learning approaches, (2) extreme scale variation spanning 2–3 orders of magnitude within single scenes, and (3) domain adaptation failures when models encounter new geographic regions or sensor characteristics. This review identifies critical research gaps and proposes prioritised future directions, emphasising foundation models for zero-shot detection, efficient architectures for resource-constrained deployment, and standardised benchmarks with size-specific metrics. The analysis provides practitioners with evidence-based decision frameworks for method selection and researchers with a roadmap for advancing object detection in remote sensing applications. Full article

Pine wilt disease (PWD) is a devastating biological forest disturbance, making its large-scale and high-precision remote sensing monitoring crucial for epidemic prevention and control. However, the performance of existing deep learning methods in high-resolution imagery is often limited by the confusion of spectral features among disparate ground objects and the complexity of forest boundaries. To address these challenges, this study proposes an innovative, end-to-end deep learning architecture termed MBA-Former. Built upon the robust Swin Transformer V2 backbone, the model systematically integrates two highly adaptable functional modules: (1) a front-end intelligent fusion module designed to adaptively fuse heterogeneous features, and (2) a back-end boundary refinement module that refines segmentation contours via dual-task learning. To train and evaluate the model, fine-grained manual annotations were first performed on Gaofen-2 satellite imagery acquired from multiple typical epidemic areas across northern and southern China. Information-enhanced datasets were constructed by fusing the original spectral bands, typical vegetation indices, and texture features. A comprehensive performance evaluation was then conducted, specifically targeting typical challenging scenarios characterized by complex ground object boundaries. The experimental results demonstrate that the Multi-modal Boundary-Aware Transformer (MBA-Former) significantly outperforms current state-of-the-art models. It achieved a mean Intersection over Union (mIoU) of 81.74%, an IoU of 77.58% for the most critical infected tree category, and a Boundary F1-Score of 78.62%. Compared to the best-performing baseline model, Swin-Unet, these three metrics exhibited notable improvements of 2.88%, 3.55%, and 4.46%, respectively. These findings convincingly demonstrate that MBA-Former provides a highly accurate and robust solution for the large-scale, automated remote sensing monitoring of forest diseases, offering immense value in preventing significant economic losses and preserving forest ecosystem integrity. Full article