Search Results (195)

Mycotoxins are secondary metabolites produced primarily by certain species of the genera Aspergillus, Fusarium, Penicillium, Alternaria, and Claviceps. Toxigenic fungi and mycotoxins are prevalent in staple foods, resulting in significant economic losses and detrimental impacts on public health and food safety. These fungi demonstrate remarkable adaptation to water and heat stress conditions associated with climate change, and the use of synthetic antifungals can lead to the selection of resistant strains. In this context, the development of novel strategies for their prevention and control of food is a priority objective. This review synthesizes the extant knowledge concerning the antifungal and anti-mycotoxin potential of the primary metal nanoparticles (silver, copper) and metal oxide nanoparticles (copper oxide and zinc oxide) studied in the literature. It also considers synthesis methods and the lack of consensus on technical definitions and regulations. Despite methodological gaps and the scarcity of publications analyzing the effect of these NPs on fungal growth and mycotoxin production simultaneously, it can be concluded that these NPs present high reactivity, stability, and the ability to combat these food risks. However, aspects related to their biosafety and consumer acceptance remain major challenges that must be addressed for their implementation in the food industry. Full article

Objective: Fluoride is widely recognized for its preventive role against secondary caries. This systematic review aimed to evaluate how environmental and material factors influence fluoride ion release from metal-reinforced glass ionomer cements. Methods: A structured literature search was performed in March 2025 across PubMed, Scopus, and Web of Science databases. Search terms included combinations of fluoride release AND glass ionomer AND silver OR zinc OR strontium OR copper. The study selection process followed PRISMA 2020 guidelines and was organized using the PICO framework. Out of 281 initially identified records, 153 were screened based on titles and abstracts. After applying predefined eligibility criteria, 23 studies met the inclusion requirements and were included in the qualitative analysis. Results: Among the 23 included publications, 12 involved glass ionomers modified with silver, and 6 of these reported an increase in fluoride release. Seven studies focused on zinc-modified cements, and four examined materials reinforced with strontium. Conclusions: The addition of strontium, titanium oxide, silver nanoparticles, or zirconium oxide increases the release of fluoride ions, while sintered silver reduces it. There is a great discrepancy among researchers regarding the effect of the addition of zinc oxide and its appropriate amount in the glass ionomer material. Full article

The growing prevalence of bacterial infections and the alarming rise of antimicrobial resistance (AMR) have driven the need for innovative antimicrobial coatings for medical implants and biomaterials. However, implant surface properties, such as roughness, chemistry, and reactivity, critically influence biological interactions and must be engineered to ensure biocompatibility, corrosion resistance, and sustained antibacterial activity. This review evaluates three principal categories of antimicrobial agents utilized in surface functionalization: metal/metaloxide nanoparticles, antibiotics, and phytochemical compounds. Metal/metaloxide-based coatings, especially those incorporating silver (Ag), zinc oxide (ZnO), and copper oxide (CuO), offer broad-spectrum antimicrobial efficacy through mechanisms such as reactive oxygen species (ROS) generation and bacterial membrane disruption, with a reduced risk of resistance development. Antibiotic-based coatings enable localized drug delivery but often face limitations related to burst release, cytotoxicity, and diminishing effectiveness against multidrug-resistant (MDR) strains. In contrast, phytochemical-derived coatings—using bioactive plant compounds such as curcumin, eugenol, and quercetin—present a promising, biocompatible, and sustainable alternative. These agents not only exhibit antimicrobial properties but also provide anti-inflammatory, antioxidant, and osteogenic benefits, making them multifunctional tools for implant surface modification. The integration of these antimicrobial strategies aims to reduce bacterial adhesion, inhibit biofilm formation, and enhance tissue regeneration. By leveraging the synergistic effects of metal/metaloxide nanoparticles, antibiotics, and phytochemicals, next-generation implant coatings hold the potential to significantly improve infection control and clinical outcomes in implant-based therapies. Full article

Printed electronics employ established printing methods to create low-cost, mechanically flexible devices including batteries, supercapacitors, sensors, antennas and RFID tags on plastic, paper and textile substrates. This review focuses on the specific contribution of screen printing to that landscape, examining how ink viscosity, mesh selection and squeegee dynamics govern film uniformity, pattern resolution and ultimately device performance. Recent progress in advanced ink systems is surveyed, highlighting carbon allotropes (graphene, carbon nano-onions, carbon nanotubes, graphite), silver and copper nanostructures, MXene and functional oxides that collectively enhance mechanical robustness, electrical conductivity and radio-frequency behavior. Parallel improvements in substrate engineering such as polyimide, PET, TPU, cellulose and elastomers demonstrate the technique’s capacity to accommodate complex geometries for wearable, medical and industrial applications while supporting environmentally responsible material choices such as water-borne binders and bio-based solvents. By mapping two decades of developments across energy-storage layers and functional electronics, the article identifies the key process elements, recurring challenges and emerging sustainable practices that will guide future optimization of screen-printing materials and protocols for high-performance, customizable and eco-friendly flexible devices. Full article

Burn wounds represent a complex clinical challenge, primarily due to their high susceptibility to infections and the frequent formation of the biofilm, which significantly hinder the healing process. Therefore, effective infection prevention and management are critical components of burn wound care. This review provides a comprehensive overview of the current and emerging antimicrobial strategies in burn management, with a particular focus on alternative approaches to conventional antiseptics and antibiotics. This manuscript highlights the role of metals and metal-based agents, including silver, zinc oxide, and copper compounds, alongside plant-derived bioactive substances such as aloe vera, marigold, and turmeric. Additionally, the potential of antimicrobial peptides and probiotics as innovative therapeutic options is explored, emphasizing their antimicrobial, anti-inflammatory, and pro-healing properties. Finally, this review presents an analysis of recent patents in the field of burn wound care, offering insights into current trends and future directions in the development of advanced wound dressings. By addressing both established and novel strategies, this review aims to provide a valuable resource for clinicians, researchers, and innovators seeking to improve outcomes in burn wound management. Full article

Nanotechnology is emerging as an innovative and sustainable agricultural approach that minimizes environmental impacts by developing nanostructured materials to promote plant growth and combat plant-parasitic nematodes (PPNs). Plant-based nanoparticles (NPs) are attracting increasing attention as they are more environmentally friendly, economical and biocompatible compared to traditional chemical and physical synthesis methods. The ability of plants to reduce and stabilize metal ions and form NPs of specific size and morphology through their biochemical content offers great advantages for agricultural applications. Phytochemicals produced by plants enable the biological synthesis of metal and metal oxide NPs by acting as reducing agents and coating agents in NP synthesis. The effects of plant-based NPs in nematode control are based on mechanisms such as the disruption of the nematode cuticle, induction of oxidative stress and interference with parasite metabolism. Several plant species have been investigated for the synthesis of metal and metal oxide nanoparticles such as silver (Ag-NPs), nickel oxide (NiO-NPs), zinc oxide (ZnO-NPs), copper oxide (CuO-NPs) and iron (Fe-NPs). These biologically synthesized NPs show potent biological activity against important PPNs such as Meloidogyne spp., Pratylenchus spp. and Heterodera spp. The integration of plant-derived NPs into agricultural systems has significant potential for plant growth promotion, nematode suppression and soil health improvement. This review highlights their role in reducing environmental impact in agricultural applications by examining the sustainable synthesis processes of plant-based NPs. Full article

Two phenoxy-ketimines ligands, 2-(1-(benzylimino)ethyl)phenol (HL^BSMe) and 2-((benzylimino)(phenyl)methyl)phenol (HL^BSPh), were synthesized and used as supporting ligands of new copper(II), copper(I), and silver(I) complexes. In order to confer different solubility properties to the metal complexes and to stabilize Cu and Ag in their +1 oxidation state, the lipophilic triphenylphosphine (PPh₃) and the hydrophilic 1,3,5-triaza-7-phosphaadamantane (PTA) were selected as co-ligands in the syntheses of the Cu(I) and Ag(I) complexes. All compounds were characterized by CHN analysis, NMR, FT-IR spectroscopy, and electrospray ionization mass spectrometry (ESI-MS); the molecular structure of the copper(II) complex [Cu(L^BSPh)₂] was also determined by single-crystal X-ray diffraction. Finally, the antibacterial activity of the metal complexes, the Schiff base ligands and phosphane co-ligands, were assessed by determining the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against Gram-negative (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus). Full article

Copper nanowires (Cu NWs) are considered a promising alternative to indium tin oxide (ITO) and silver nanowires (Ag NWs) due to their excellent electrical conductivity, mechanical properties, abundant reserves, and low cost. They have been widely applied in various optoelectronic devices. In this study, Cu NWs were synthesized using copper chloride (CuCl₂) as the precursor, monoethanolamine (MEA) as the complexing agent, and hydrated hydrazine (N₂H₄) as the reducing agent under strongly alkaline conditions at 60 °C. Notably, this is the first time that MEA has been employed as a complexing agent in this synthesis method for Cu NWs. Through a series of experiments, the optimal conditions for the CuCl₂–MEA–N₂H₄ system in Cu NWs synthesis were determined. This study revealed that the presence of amines plays a crucial role in nanowire formation, as the co-ordination of MEA with copper in this system provides selectivity for the nanowire growth direction. MEA prevents the excessive conversion of Cu(I) complexes into Cu₂O octahedral precipitates and exhibits an adsorption effect during Cu NWs formation. The different adsorption tendencies of MEA at the nanowire ends and lateral surfaces, depending on its concentration, influence the growth of the Cu NWs, as directly reflected by changes in their diameter and length. At an MEA concentration of 210 mM, the synthesized Cu NWs have an average diameter of approximately 101 nm and a length of about 28 μm. To fabricate transparent conductive films, the Cu NW network was transferred onto a polyethylene terephthalate (PET) substrate by applying a pressure of 20 MPa using a tablet press to ensure strong adhesion between the Cu NW-coated mixed cellulose ester (MCE) filter membrane and the PET substrate. Subsequently, the MCE membrane was dissolved by acetone and isopropanol immersion. The resulting Cu NW transparent conductive film exhibited a sheet resistance of 52 Ω sq⁻¹ with an optical transmittance of 86.7%. Full article

This study presents the preparation of hybrid iron oxide nanocomposites through a two-step process combining microfluidic-assisted synthesis and post-synthetic surface modification. Fe₃O₄ nanoparticles were synthesized and simultaneously functionalized with salicylic acid using a three-dimensional vortex-type microfluidic chip, enabling rapid and uniform particle formation. The resulting Fe₃O₄/SA nanostructures were further modified with either silver or copper oxide to form iron oxide nanocomposites with enhanced antimicrobial functionality. These nanocomposites were subsequently integrated into silica aerogel matrices using a dip-coating approach to improve surface dispersion, structural stability, and biocompatibility. The structural and morphological properties of the samples were investigated using XRD, FT-IR, TEM with SAED analysis, and Raman microscopy. In vitro cytotoxicity and antimicrobial assays demonstrated that Fe₃O₄/SA–Ag and Fe₃O₄/SA–CuO exhibit potent antibacterial activity and cell type-dependent biocompatibility. In vivo biodistribution studies showed no accumulation in major organs and selective clearance via the spleen, validating the systemic safety of the platform. These findings highlight the potential of the synthesized nanocomposites as biocompatible, antimicrobial coatings for advanced biomedical surfaces. Full article

Nanoparticles (NPs) have revolutionized biomedical and pharmaceutical applications due to their unique physicochemical properties. However, their widespread use has raised concerns regarding their potential toxicity, particularly mediated by oxidative stress mechanisms. This redox imbalance, primarily driven by the overproduction of reactive oxygen species (ROS), plays a central role in NP-induced toxicity, leading to cellular dysfunction, inflammation, apoptosis, and genotoxicity. Zebrafish (Danio rerio) have emerged as a powerful in vivo model for nanotoxicology, offering advantages such as genetic similarity to humans, rapid development, and optical transparency, allowing real-time monitoring of oxidative damage. This review synthesizes current findings on NP-induced oxidative stress in zebrafish, highlighting key toxicity mechanisms and case studies involving metallic (gold, silver, copper), metal oxide (zinc oxide, titanium dioxide, iron oxide), polymeric, and lipid-based NPs. The influence of NP physicochemical properties, such as size, surface charge, and functionalization, on oxidative stress responses is explored. Additionally, experimental approaches used to assess ROS generation, antioxidant enzyme activity, and oxidative damage biomarkers in zebrafish models are examined. In addition to toxicity concerns, pharmaceutical applications of antioxidant-modified NPs are evaluated, particularly their potential in drug delivery, neuroprotection, and disease therapeutics. Notably, studies show that curcumin- and quercetin-loaded nanoparticles enhance antioxidant defense and reduce neurotoxicity in zebrafish models, demonstrating their promise in neuroprotective therapies. Furthermore, cerium oxide nanoparticles, which mimic catalase and SOD enzymatic activity, have shown significant efficacy in reducing ROS and protecting against oxidative damage. Challenges in zebrafish-based nanotoxicology, the need for standardized methodologies, and future directions for optimizing NP design to minimize oxidative stress-related risks are also discussed. By integrating insights from toxicity mechanisms, case studies, and pharmaceutical strategies, this review supports the development of safer and more effective nanoparticle-based therapies while addressing the challenges of oxidative stress-related toxicity. Full article

This study investigates silver (Ag), copper oxide (CuO), and bimetallic Ag/CuO nanoparticles (NPs) synthesized using Cistus creticus L. extract, focusing on their synthesis, physicochemical characteristics, and antioxidant activity. Green synthesis methods utilizing plant extracts offer environmentally benign routes for nanoparticle fabrication, attracting significant interest across multiple fields. NP formation was confirmed by UV/Vis and total X-ray fluorescence (TXRF) spectroscopy, while dynamic and electrophoretic light scattering (DLS, ELS) characterized particle size and ζ-potential, respectively. AgNPs exhibited the smallest particle size (30.8 ± 8.81 nm), while CuONPs had the largest (44.07 ± 19.19 nm). For Ag/CuONPs, the ζ-potential value was −77.9 ± 2.99 mV. Morphological and structural analyses performed using transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) revealed that AgNPs were spherical, while CuONPs and Ag/CuONPs exhibited spherical and polymorphic structures. Colloidal stability studies over 60 days demonstrated that the NPs were highly stable, indicating their suitability for pharmaceutical and cosmetic applications. Antioxidant activity, assessed via the DPPH assay, demonstrated that CuONPs had the highest free radical scavenging activity. By systemically comparing Ag, CuO, and bimetallic Ag/CuONPs synthesized from Cistus creticus L. extract, this study provides valuable insights for the development of tailored nanomaterials with diverse applications in pharmaceutics and cosmetics. Full article

The extraction of metallic nanoparticles (MNPs) from waste electrical and electronic equipment (WEEE) has gained extensive attention from researchers for eco-friendly, reliable, and sustainable alternative protocol over the traditional linear economic approach (make-use-dispose) for boosting the circular economy. A plethora of MNPs including metals/metal oxide nanoparticles having a size dimension ranging from 1–100 nanometers (nm) have been extracted from these WEEE by using different chemical, physical, and biological methods. Recovery of certain precious MNPs can be achieved by dismantling and recycling electronic waste items in the form of gold (Au), platinum (Pt), zinc oxide (ZnO), silver (Ag), and copper oxide (CuO). These MNPs provide a huge range of applications such as antibacterial, therapeutic, target drug delivery, and biotechnological applications. This comprehensive review provides in-depth knowledge of the synthesis of MNPs using different techniques from WEEE and delves into their potential applications in biomedical fields with in-depth mechanisms. This article also discussed global challenges and opportunities in this area for adopting the concept of circular economy to conserve natural resources for future generations and hence create a greener environment and protect our planet. Full article

Melanoma is an aggressive cancer with rising incidence and high mortality rates, largely due to chemotherapy resistance and molecular dysregulation. Nanotechnology, particularly silver nanoparticles (AgNPs), has emerged as a promising therapeutic avenue because of the nanoparticles’ ability to induce oxidative stress and apoptosis in cancer cells. However, conventional colloidal AgNPs lack selectivity, often causing significant damage to healthy cells. In this study, we introduce a green synthesis of AgNPs using plant extracts, providing an eco-friendly alternative with improved antitumor selectivity compared to traditional colloidal AgNPs. Leveraging label-free Data-Independent Acquisition/Sequential Window Acquisition of All Theoretical Mass Spectrometry (DIA/SWATH MS) quantitative proteomics, we investigated the antitumor effects of green-synthesized versus traditional AgNPs on A375 melanoma cells at 24 and 48 h. Our findings reveal that green AgNPs selectively reduced melanoma cell viability while sparing healthy keratinocytes (HaCaT), a benefit not observed with colloidal AgNPs. Proteomic analysis highlighted that green AgNPs significantly downregulated oncogenes, enhanced carbohydrate metabolism, and disrupted copper homeostasis in melanoma cells. This marks the first study to explore the differential effects of green and traditional AgNPs on melanoma using an integrated proteomic approach, underscoring the molecular potential of green AgNPs as a targeted and sustainable option for cancer therapy. Full article

Background/Objectives. Chronic wounds pose a substantial global healthcare burden exacerbated by aging populations and the increasing prevalence of conditions such as diabetes, peripheral vascular disease, and venous insufficiency. Impaired physiological repair mechanisms, including angiogenesis, collagen synthesis, and re-epithelialization, hinder the healing process in chronic wounds. Many of these physiological processes are dependent on their interaction with copper. We hypothesized that the targeted delivery of copper ions to the wound bed would enhance healing. Methods. Wound dressings impregnated with copper oxide microparticles were designed to ensure the controlled release of copper ions. The efficacy of these dressings was evaluated using non-infected wound models, including diabetic mouse models compared against control and silver dressings. Outcome measures included wound closure rates, epidermal skin quality assessed by histopathological examination, and gene expression profiling. Clinical applications were assessed through diverse case studies and controlled trials involving chronic wound management. Results. Copper dressings significantly accelerated wound closure and enhanced angiogenesis compared to control and silver dressings. Histopathological analyses revealed faster granulation tissue formation, epidermal regeneration, and neovascularization. Gene expression studies showed upregulation of critical angiogenic factors such as VEGF and HIF-1α. Investigations and clinical observations corroborated improved healing across various chronic wound types, including non-infected wounds. Conclusions. Copper is essential for wound healing, and copper-impregnated dressings provide a promising solution for chronic wound management. By enhancing angiogenesis and tissue regeneration, these dressings go beyond antimicrobial action, offering a cost-effective and innovative alternative to conventional therapies. Copper dressings represent a transformative advancement in addressing the challenges of chronic wound care. Full article

Silver-coated copper powder, a cost-effective alternative to pure silver, has gained attention for its potential applications in electronics, energy, and catalysis. To explore the impact of heat treatment on its properties, a series of experiments were conducted with temperature increments of 50 ${}^{\circ }$C and varying holding times. The silver-coated copper powder was prepared through chemical plating and was heat-treated to assess changes in surface morphology, conductivity, density, and antioxidant performance. Results show that heat treatment significantly improved surface flatness and smoothness, particularly at 600 ${}^{\circ }$C for 5 min followed by 700 ${}^{\circ }$C for 10 min. After treatment, the specific surface area decreased from 0.2282 m²/g to 0.2217 m²/g, while bulk density increased from 2.813 g/cm³ to 2.945 g/cm³, improving fluidity and stability. However, dislocation defects and the elimination of surface plasmon coupling between silver particles reduced conductivity, with resistance rising from 2.8 m$\Omega$ to 3.2 m$\Omega$. X-ray diffraction showed an increase in silver grain size from 13.68 nm to 20.33 nm, enhancing density but increasing electron scattering. Heat treatment also raised the initial oxidation temperature from 200 ${}^{\circ }$C to 230 ${}^{\circ }$C but accelerated subsequent oxidation. This study improves upon existing technology by significantly enhancing the surface smoothness, oxidation resistance, density, and specific surface area of the silver-coated copper powder. Full article