Search Results (109)

Addressing the challenges of bulky, low-efficiency sound-insulation materials at low frequencies, this work proposes an acoustic metamaterial based on curve fractal channels. Each unit cell comprises a concentric circular-ring channel recursively iterated: as the fractal order increases, the channel path length grows exponentially, enabling outstanding sound-insulation performance within a deep-subwavelength thickness. Finite-element and transfer-matrix analyses show that increasing the fractal order from one to three raises the number of bandgaps from three to five and expands total stop-band coverage from 17% to over 40% within a deep-subwavelength thickness. Four-microphone impedance-tube measurements on the third-order sample validate a peak transmission loss of 75 dB at 495 Hz, in excellent agreement with simulations. Compared to conventional zigzag and Hilbert-maze designs, this curve fractal architecture delivers enhanced low-frequency broadband insulation, structural lightweighting, and ease of fabrication, making it a promising solution for noise control in machine rooms, ducting systems, and traffic environments. The method proposed in this paper can be applied to noise reduction of transmission parts for ceramic automation production. Full article

Near-field acoustic holography (NAH) provides an effective way to achieve wide-band, high-resolution visualization measurement of the sound insulation performance of building components. However, based on Green’s function, the microphone array’s inherent amplitude and phase mismatch errors will exponentially amplify the sound field inversion process, significantly reducing the measurement accuracy. To systematically evaluate this problem, this study combines numerical simulation with actual measurements in a soundproof room that complies with the ISO 10140 standard, quantitatively analyzes the influence of array system errors on NAH reconstructed sound insulation and acoustic images, and proposes an error correction strategy based on channel transfer function normalization. The research results show that when the array amplitude and phase mismatch mean values are controlled within 5% and 5°, respectively, the deviation of the weighted sound insulation measured by NAH can be controlled within 1 dB, and the error in the key frequency band of building sound insulation (200–1.6k Hz) does not exceed 1.5 dB; when the mismatch mean value increases to 10% and 10°, the deviation of the weighted sound insulation can reach 2 dB, and the error in the high-frequency band (≥1.6k Hz) significantly increases to more than 2.0 dB. The sound image shows noticeable spatial distortion in the frequency band above 250 Hz. After applying the proposed correction method, the NAH measurement results of the domestic microphone array are highly consistent with the weighted sound insulation measured by the standard method, and the measurement difference in the key frequency band is less than 1.0 dB, which significantly improves the reliability and applicability of low-cost equipment in engineering applications. In addition, the study reveals the inherent mechanism of differential amplification of system errors in the propagating wave and evanescent wave channels. It provides quantitative thresholds and operational guidance for instrument selection, array calibration, and error compensation of NAH technology in building sound insulation detection. Full article

The architecture of contemporary museums often emphasizes visual aesthetics, such as large volumes, open-plan layouts, and highly reflective finishes, resulting in acoustic challenges, such as excessive reverberation, poor speech intelligibility, elevated background noise, and reduced privacy. This study quantified the impact of surface—specific absorption treatments on acoustic metrics across eight gallery spaces. Room impulse responses calibrated virtual models, which simulated nine absorption scenarios (low, medium, and high on ceilings, floors, and walls) and evaluated reverberation time (T₂₀), speech transmission index (STI), clarity (C₅₀), distraction distance (r_D), Spatial Decay Rate of Speech (D_2,S), and Speech Level at 4 m (L_p,A,S,4m). The results indicate that going from concrete to a wooden floor yields the most rapid T₂₀ reductions (up to −1.75 s), ceiling treatments deliver the greatest STI and C₅₀ gains (e.g., STI increases of +0.16), and high-absorption walls maximize privacy metrics (D_2,S and L_p,A,S,4m). A linear regression model further predicted the STI from T₂₀, total absorption (Sabins), and room volume, with an 84.9% conditional R², enabling ±0.03 accuracy without specialized testing. These findings provide empirically derived, surface-specific “first-move” guidelines for architects and acousticians, underscoring the necessity of integrating acoustics early in museum design to balance auditory and visual objectives and enhance the visitor experience. Full article

Compared to traditional temperature measurement methods, ultrasonic temperature measurement technology based on the principle of resonance offers advantages such as shorter section lengths, higher signal amplitude, and reduced signal attenuation. First, the type of sensor-sensitive element was determined, with a resonant design chosen to improve measurement performance; using magnetostrictive and resonant temperature measurement principles, the length, diameter, and resonator dimensions of the waveguide rod were designed, and a molybdenum–rhenium alloy (Mo-5%Re) material suitable for high-temperature environments was selected; COMSOL finite element simulation was used to simulate the propagation characteristics of acoustic signals in the waveguide rod, observing the distribution of sound pressure and energy attenuation, verifying the applicability of the model in high-temperature testing environments. Second, a resonant temperature sensor consistent with the simulation parameters was prepared using a molybdenum–rhenium alloy waveguide rod, and an ultrasonic resonant temperature-sensing system suitable for high-temperature environments up to 1800 °C was constructed using the molybdenum–rhenium alloy waveguide rod. The experiment used a tungsten–rhenium calibration furnace to perform static calibration of the sensor. The temperature range was set from room temperature to 1800 °C, with the temperature increased by 100 °C at a time, and it was maintained at each temperature point for 5 to 10 min to ensure thermal stability. This was conducted to verify the performance of the sensor and obtain the functional relationship between temperature and resonance frequency. Experimental results show that during the heating process, the average resonance frequency of the sensor decreased from 341.8 kHz to 310.37 kHz, with an average sensitivity of 17.66 Hz/°C. During the cooling process, the frequency increased from 309 kHz to 341.8 kHz, with an average sensitivity of 18.43 Hz/°C. After cooling to room temperature, the sensor’s resonant frequency returned to its initial value of 341.8 kHz, demonstrating excellent repeatability and thermal stability. This provides a reliable technical foundation for its application in actual high-temperature environments. Full article

Based on the resource conservation requirements of GB/T 50378-2019 “Green Building Evaluation Standard”, this study constructed a BIM–Ecotect collaborative analysis model and proposed a “four-dimensional integration” green performance optimization method. Taking a high-rise office building in Wuhan as an example, a LOD 300-level Revit building information model was established, and a multidisciplinary collaborative analysis was achieved through gbXML data interaction. The lighting simulation results show that the average natural lighting coefficient of the office area facing south is 2.4 (the standard 85%), while in the meeting room area, due to the optimized design of the curtain wall, the average natural lighting coefficient has increased to 2.6 (the standard 92%). In terms of energy-saving renovation, a three-dimensional collaborative design strategy was adopted. Through the optimization of the envelope structure, the cooling load of the air conditioning system was reduced by 25.3%, and the heat load was reduced by 23.6% (the u value of the exterior wall was reduced by 56.3%, the SHGC of the exterior windows was reduced by 42.9%, and the thermal resistance of the roof was increased by 150%). The ventilation optimization adopts the CFD flow field reverse design, adjusting the window opening rate of the exterior windows from 15% to 20% to form a turbulent diffusion effect. Therefore, the air change rate in the office area reached 2.5 times per hour, and the CO₂ concentration decreased by up to 27.1% at most. The innovative adoption of the “composite sound insulation curtain wall” technology in acoustic environment control has increased the indoor noise compliance rate by 27 percentage points (from 65% to 92%). The above research data indicate that digital collaborative design can achieve an overall energy-saving rate of over 20% for buildings, providing a replicable technical path for enhancing the performance of green buildings. Full article

Opera houses are often used as concert halls with the use of a temporary acoustic shell set on stage. In most cases, the shell shape and its position in the fly tower are decided by theatre technicians, after evaluating the concert programme and considering the conductor and the musicians’ requests, without being supported by an acoustic analysis. This paper describes the acoustic shell influence on the acoustic field of a baroque theatre when changing its dimensions and the orchestra staff, with and without the choir, when the theatre is used as a concert hall. The “Opera di Roma” case study is presented, and the main acoustic parameters’ trends and their sensitivity are analyzed. The shell layout optimization, which is suggested in the prediction analysis of the case study, does not coincide with the ones preferred by the musicians. The main reasons for this controversial result are explained in the paper, underlining the rules determining the musicians’ opinions during the acoustic design and/or analysis process, to better focalize the applied acoustics activities. Full article

This study investigates the effectiveness of sloped horizontal shading fins in enhancing visual comfort, electricity generation, and acoustic attenuation in a south-facing office room in Wrocław, Poland (51° latitude). A simulation-based approach combined Radiance daylight simulations, PV energy modeling, and graphical acoustic analysis. Four fin configurations were tested to identify the optimal design. The results indicate that Variant 3, featuring two 1 m wide fins inclined at 45°, achieved the best overall performance, increasing UDI_{300–3000/168} from 53.1% to 95.8%, reducing DGP from 50% to 27%, and enabling an estimated annual electricity production of 4.67 MWh. Additionally, applying sound-absorbing material on the shaded side of the fins significantly reduced reflective acoustic wave bounces, significantly reducing façade-exposed noise. This multifunctional solution demonstrates a practical and scalable strategy for improving office environmental quality in temperate climates, contributing to energy efficiency, acoustic comfort, and visual well being. Full article

Supramolecular compounds are capable of encapsulating small molecules to form host–guest compounds, which can be combined with sound surface wave technology to achieve high-precision detection of specific gases. In this paper, we analyzed the adsorption ability of Cryptophane-A and Cryptophane-E, the caged supramolecular materials, at room temperature by numerical simulation using first principles. The geometrical optimization of Cryptophane-A, Cryptophane-E, and gas molecules was carried out by the Dmol³ module in Materials Studio. Through adsorption calculation of gas molecules, the change of density of states and the magnitude of adsorption energy of Cryptophane-A and E were compared and analyzed. The results show that Cryptophane-A and E are van der Waals adsorption for molecules in gas (except CO₂ and C₂H₆). The adsorption energy of Cryptophane-A is lower than that of Cryptophane-E, but it is more selective and has preferential adsorption for methane. In this paper, we also tried to calculate the adsorption of Cryptophane-A and E on two methane molecules. The result showed that the former could adsorb two methane molecules, but the adsorption energy was lower than that of one methane molecule; the latter could not adsorb two methane molecules stably. The study shows that Cryptophane-A is more suitable as a sensitive material for CH₄ detection, which provides support for the development of acoustic surface wave methane detection technology. Full article

Machine learning (ML) robustness for voice disorder detection was evaluated using reverberation-augmented recordings. Common vocal health assessment voice features from steady vowel samples (135 pathological, 49 controls) were used to train/test six ML classifiers. Detection performance was evaluated under low-reverb and simulated medium (med = 0.48 s) and high-reverb times (high = 1.82 s). All models’ performance declined with longer reverberation. Support Vector Machine exhibited slight robustness but faced performance challenges. Random Forest and Gradient Boosting, though strong under low reverb, lacked generalizability in med/high reverb. Training/testing ML on augmented data is essential to enhance their reliability in real-world voice assessments. Full article

Noise levels in Neonatal Intensive Care Units (NICUs) significantly impact neonatal health, influencing stress levels, sleep cycles, and overall development. One critical factor in managing noise is reverberation time (T), which affects sound persistence and acoustic comfort. This study, conducted at the Universidad de Las Américas in Quito, Ecuador, examines T in two NICU room types—open unit and private room. Measurements were taken in simulated environments to assess acoustic differences between these two designs. Results indicate that T is significantly lower in private rooms compared to open units, suggesting that private rooms provide a more controlled and acoustically favorable environment for neonates. Lower T reduces excessive noise exposure, improving sleep quality and minimizing stress responses in preterm infants. Furthermore, the findings align with Sustainable Development Goals (SDGs), particularly SDG 3 (Good Health and Well-being) and SDG 11 (Sustainable Cities and Communities), by advocating for hospital designs that enhance patient health and promote sustainable infrastructure. These results highlight the importance of integrating acoustically optimized spaces in NICUs to improve neonatal outcomes and contribute to a more sustainable healthcare system. Future research should further explore architectural solutions for noise reduction to refine NICU design standards. Full article

Acoustic temperature measurement (ATM) and sound source localization (SSL) are two important applications of acoustic sensors. The development of novel acoustic sensors capable of both ATM and SSL is an innovative research topic with great interest. In this work, an acoustic Fabry-Perot resonance detector (AFPRD) and its cross-shaped array were designed and fabricated, and the passive ATM function of the AFPRD and the SSL capability of the AFPRD array were simulated and experimentally verified. The AFPRD consists of an acoustic waveguide and a microphone with its head inserted into the waveguide, which can significantly enhance the microphone’s sensitivity via the FP resonance effect. As a result, the frequency response curve of AFPRD can be easily measured using weak ambient white noise. Based on the measured frequency response curve, the linear relationship between the resonant frequency and the resonant mode order of the AFPRD can be determined, the slope of which can be used to calculate the ambient sound velocity and air temperature. The AFPRD array was prepared by using four bent acoustic waveguides to expand the array aperture, which combined with the multiple signal classification (MUSIC) algorithm can be used for distant multi-target localization. The SSL accuracy can be improved by substituting the sound speed measured in real time into the MUSIC algorithm. The AFPRD’s passive ATM function was verified in an anechoic room with white noise as low as 17 dB, and the ATM accuracy reached 0.4 °C. The SSL function of the AFPRD array was demonstrated in the outdoor environment, and the SSL error of the acoustic target with a sound pressure of 35 mPa was less than 1.2°. The findings open up a new avenue for the development of multifunctional acoustic detection devices and systems. Full article

Gold nanoparticles–cuprous oxide/reduced graphene oxide/polypyrrole (AuNPs-Cu₂O/rGO/PPy) hybrid nanocomposites were synthesized for surface acoustic wave (SAW) sensors, achieving high sensitivity (2 Hz/ppb), selectivity, and fast response (~2 min) at room temperature. The films, deposited via spin-coating, were characterized by SEM, EDS, and XRD, revealing a rough, wrinkled morphology beneficial for gas adsorption. The sensor showed significant frequency shifts to NH₃, enhanced by AuNPs, Cu₂O, rGO, and PPy. It had a 6.4-fold stronger response to NH₃ compared to CO₂, H₂, and CO, confirming excellent selectivity. The linear detection range was 12–1000 ppb, with a limit of detection (LOD) of 8 ppb. Humidity affected performance, causing negative frequency shifts, and sensitivity declined after 30 days due to resistivity changes. Despite this, the sensor demonstrated excellent NH₃ selectivity and stability across multiple cycles. In simulated breath tests, it distinguished between healthy and patient-like samples, highlighting its potential as a reliable, non-invasive diagnostic tool. Full article

In order to improve the acoustic performance of honeycomb sandwich structures, a Helmholtz-type honeycomb sandwich acoustic metamaterial (HHSAM) was proposed. The theoretical and finite element models were established by calculating the acoustic impedance of multiple parallel Helmholtz resonators (HR). By comparing the sound absorption of the single and multiple HR, it was found that the simulation results were basically consistent with the theoretical calculations. The sound absorption and insulation performance of the honeycomb panels, the honeycomb perforated panels, and the HHSAM structure were compared through impedance tube experiments. The results showed that, over a wide frequency range, the acoustic performance of the HHSAM structure was superior to that of the other two structures. Under scattered sound field conditions, the reverberation room results showed that the sound absorption of the HHSAM structure was better than that of the honeycomb panel in the frequency range of 100–5000 Hz. The noise reduction coefficient (NRC) of the honeycomb panel was 0.1, indicating almost no sound absorption effect in engineering. The NRC of the HHSAM structure could reach 0.35. In terms of sound insulation, the HHSAM structure was more prominent in the 400–4000 Hz range than the honeycomb panel. In the frequency range of 500–1600 Hz, the transmission loss of the HHSAM was 5 dB higher than that of the honeycomb panel. Full article

High-temperature pipelines, as core facilities in the fields of petrochemical and power, are constantly exposed to extreme working conditions ranging from 450 to 600 °C, facing risks of stress corrosion, creep damage, and other defects. Traditional shutdown inspections are time-consuming and costly. Meanwhile, existing electromagnetic acoustic transducers (EMATs) are restricted by their high-temperature tolerance (≤500 °C) and short-term stability (effective working duration < 5 min). This paper proposes a high-frequency circumferential guided wave (CLamb wave) EMAT based on a Halbach permanent magnet array. Through magnetic circuit optimization (Halbach array) and multi-layer insulation design, it enables continuous and stable detection on the surface of 600 °C pipelines for 10 min. The simulations revealed that the Halbach array increased the magnetic flux density by 1.4 times and the total displacement amplitude by 2 times at a magnet’s large lift-off (9 mm). The experimental results show that the internal temperature of the sensor remained stable below 167 °C at 600 °C. It was capable of detecting the smallest defect of a φ3 mm half-hole (depth half of the wall thickness), with a signal attenuation rate of only 0.32%/min. The signal amplitude of Q235 pipelines under high-temperature short-term detection (<5 min) was 1.5 times higher than that at room temperature. However, material degradation under high temperature led to insufficient long-term stability. This study breaks through the bottleneck of long-term detection of high-temperature EMATs, providing a new scheme for efficient online detection of high-temperature pipelines. Full article

This study investigates speech intelligibility and its influencing factors within pier-style airport lounges and assesses the applicability of the Speech Transmission Index (STI) in these large, elongated spaces. Field impulse response measurements were conducted in two pier-style departure lounges with volumes of 98,099 m³ and 60,414 m³, respectively, complemented by simulated binaural room impulse responses for subjective speech intelligibility testing in Mandarin. The research explores the correlations between various acoustic parameters—Early Decay Time (EDT), Reverberation Time (T₃₀), and Definition(D₅₀)—and speech intelligibility scores under different Signal-to-Noise Ratios (SNRs). Findings indicate a significant impact of SNR on speech intelligibility, with a coefficient of determination (R²) of 0.849, suggesting substantial variability explained by SNR. As SNR increases to 10 dB(A), speech intelligibility scores improve significantly; however, further enhancements in clarity diminish beyond this threshold. Additionally, the study reveals a significant relationship between room acoustic parameters, particularly EDT and D50, and speech intelligibility scores, with EDT having a negative impact and D50 a positive impact on speech clarity. The results confirm the suitability of STI in evaluating speech intelligibility in these specific architectural contexts. This study recommends maintaining an SNR of 10 dB(A) and a minimum STI of 0.45 for public address broadcasts in pier-style departure lounges to ensure that announcements are clearly audible to passengers. Full article