Search Results (156)

This study focuses on the clastic reservoir in the first member of Yaojia Formation within Qijia-Gulong Sag, Songliao Basin. The results indicate that the reservoir in the study area develops within a shallow-water delta sedimentary system. The dominant sedimentary microfacies comprise underwater distributary channels, mouth bars, and sheet sands. Among these, the underwater distributary channel microfacies exhibits primary porosity ranging from 15.97% to 17.71%, showing the optimal reservoir quality, whereas the sheet sand microfacies has a porosity of only 7.45% to 12.08%, indicating inferior physical properties. During diagenesis, compaction notably decreases primary porosity via particle rearrangement and elastic deformation, while calcite cementation and quartz overgrowth further occlude pore throats. Although dissolution can generate secondary porosity (locally up to 40%), the precipitation of clay minerals tends to block pore throats, leading to “ineffective porosity” (permeability generally < 5 mD) and overall low-porosity and low-permeability characteristics. Carbon–oxygen isotope analysis reveals a deficiency in organic acid supply in the study area, restricting the intensity of dissolution alteration. Reservoir quality evolution is dominantly governed by the combined controls of sedimentary microfacies and diagenesis. This study emphasizes that, within shallow-water delta sedimentary settings, the material composition of sedimentary microfacies and the dynamic equilibrium of diagenetic processes jointly govern reservoir property variations. This insight provides critical theoretical support for understanding diagenetic evolution mechanisms in clastic reservoirs and enabling precise prediction of high-quality reservoir distribution. Full article

The Silurian marine shale in the Sichuan Basin is currently the main reservoir for shale gas reserves and production in China. This study investigates the reservoir evolution of the Silurian marine shale based on fractal dimension, quantifying the complexity and heterogeneity of the shale’s pore structure. Physical simulation experiments were conducted on field-collected shale samples, revealing the evolution of total organic carbon, mineral composition, porosity, and micro-fractures. The fractal dimension of shale pore was characterized using the Frenkel–Halsey–Hill and capillary bundle models. The relationships among shale components, porosity, and fractal dimensions were investigated through a correlation analysis and a principal component analysis. A comprehensive evolution model for porosity and micro-fractures was established. The evolution of mineral composition indicates a gradual increase in quartz content, accompanied by a decline in clay, feldspar, and carbonate minerals. The thermal evolution of organic matter is characterized by the formation of organic pores and shrinkage fractures on the surface of kerogen. Retained hydrocarbons undergo cracking in the late stages of thermal evolution, resulting in the formation of numerous nanometer-scale organic pores. The evolution of inorganic minerals is represented by compaction, dissolution, and the transformation of clay minerals. Throughout the simulation, porosity evolution exhibited distinct stages of rapid decline, notable increase, and relative stabilization. Both pore volume and specific surface area exhibit a trend of decreasing initially and then increasing during thermal evolution. However, pore volume slowly decreases after reaching its peak in the late overmature stage. Fractal dimensions derived from the Frenkel–Halsey–Hill model indicate that the surface roughness of pores (D1) in organic-rich shale is generally lower than the complexity of their internal structures (D2) across different maturity levels. Additionally, the average fractal dimension calculated based on the capillary bundle model is higher, suggesting that larger pores exhibit more complex structures. The correlation matrix indicates a co-evolution relationship between shale components and pore structure. Principal component analysis results show a close relationship between the porosity of inorganic pores, microfractures, and fractal dimension D2. The porosity of organic pores, the pore volume and specific surface area of the main pore size are closely related to fractal dimension D1. D1 serves as an indicator of pore development extent and characterizes the changes in components that are “consumed” or “generated” during the evolution process. Based on mineral composition, fractal dimensions, and pore structure evolution, a comprehensive model describing the evolution of pores and fractal dimensions in organic-rich shale was established. Full article

This study conducted uniaxial creep tests on coal samples under both natural and water-saturated conditions for durations of about 180 days per sample to study the stability of coal pillar dams of the Daliuta Coal Mine underground reservoir. Combined with synchronized acoustic emission (AE) monitoring, the research systematically revealed the time-dependent deformation mechanisms and damage evolution laws of coal under prolonged water immersion and natural conditions. The results indicate that water-immersed coal exhibits a unique negative creep phenomenon at the initial stage, with the strain rate down to −0.00086%/d, attributed to non-uniform pore compaction and elastic rebound effects. During the steady-state creep phase, the creep rates under water-immersed and natural conditions were comparable. However, water immersion led to an 11.4% attenuation in elastic modulus, decreasing from 2300 MPa to 2037 MPa. Water immersion would also suppress AE activity, leading to the average daily AE events of 128, which is only 25% of that under natural conditions. In the accelerating creep stage, the AE event rate surged abruptly, validating its potential as an early warning indicator for coal pillar instability. Based on the identified long-term strength of the coal sample, it is recommended to maintain operational loads below the threshold of 9 MPa. This research provides crucial theoretical foundations and experimental data for optimizing the design and safety monitoring of coal pillar dams in CMURs. Full article

China has abundant shale oil and gas resources, which have become a critical pillar for future energy substitution. However, due to the highly heterogeneous nature and complex pore structures of shale reservoirs, traditional plugging agents face significant limitations in enhancing plugging efficiency and adapting to extreme wellbore environments. In response to the technical demands of nanoparticle-based plugging in shale reservoirs, this study systematically investigated the microscopic interaction mechanisms of nano-plugging agent shell polymers (Ployk) with various reservoir minerals under different temperature and salinity conditions using molecular simulation methods. Key parameters, including interfacial interaction energy, mean square displacement, and system density distribution, were calculated to thoroughly analyze the effects of temperature and salinity variations on adsorption stability and structural evolution. The results indicate that nano-plugging agent shell polymers exhibit pronounced mineral selectivity in their adsorption behavior, with particularly strong adsorption performance on SiO₂ surfaces. Both elevated temperature and increased salinity were found to reduce the interaction strength between the shell polymers and mineral surfaces and significantly alter the spatial distribution and structural ordering of water molecules near the interface. These findings not only elucidate the fundamental interfacial mechanisms of nano-plugging agents in shale reservoirs but also provide theoretical guidance for the precise design of advanced nano-plugging agent materials, laying a scientific foundation for improving the engineering application performance of shale oil and gas wellbore-plugging technologies. Full article

Underground hydrogen storage (UHS) in carbonate and siliceous formations presents a promising solution for managing intermittent renewable energy. However, experimental data on hydrogen–rock interactions under representative subsurface conditions remain limited. This study systematically investigates mineralogical and petrophysical alterations in dolomite, calcite-rich limestone, and quartz-dominant siliceous cores subjected to high-pressure hydrogen (100 bar, 70 °C, 100 days). Distinct from prior research focused on diffraction peak shifts, our analysis prioritizes quantitative changes in mineral concentration (%) as a direct metric of reactivity and structural integrity, offering more robust insights into long-term storage viability. Hydrogen exposure induced significant dolomite dissolution, evidenced by reduced crystalline content (from 12.20% to 10.53%) and accessory phase loss, indicative of partial decarbonation and ankerite-like formation via cation exchange. Conversely, limestone exhibited more pronounced carbonate reduction (vaterite from 6.05% to 4.82% and calcite from 2.35% to 0%), signaling high reactivity, mineral instability, and potential pore clogging from secondary precipitation. In contrast, quartz-rich cores demonstrated exceptional chemical inertness, maintaining consistent mineral concentrations. Furthermore, Brunauer–Emmett–Teller (BET) surface area and Barrett–Joyner–Halenda (BJH) pore distribution analyses revealed enhanced porosity and permeability in dolomite (pore volume increased >10×), while calcite showed declining properties and quartz showed negligible changes. SEM-EDS supported these trends, detailing Fe migration and textural evolution in dolomite, microfissuring in calcite, and structural preservation in quartz. This research establishes a unique experimental framework for understanding hydrogen–rock interactions under reservoir-relevant conditions. It provides crucial insights into mineralogical compatibility and structural resilience for UHS, identifying dolomite as a highly promising host and highlighting calcitic rocks’ limitations for long-term hydrogen containment. Full article

The Carboniferous–Permian tight sandstone gas reservoirs in the Shenfu area of the Ordos Basin in China are characterized by the widespread development of multiple formations. However, significant differences exist among the tight sandstones of different formations, and their formation mechanisms and key controlling factors remain unclear, hindering the effective selection and development of favorable tight gas intervals in the study area. Through comprehensive analysis of casting thin section (CTS), scanning electron microscopy (SEM), cathodoluminescence (CL), X-ray diffraction (XRD), particle size and sorting, porosity and permeability data from Upper Paleozoic tight sandstone samples, combined with insights into depositional environments, burial history, and chemical reaction processes, this study clarifies the characteristics of tight sandstone reservoirs, reveals the key controlling factors of reservoir quality, confirms the differential evolutionary mechanisms of tight sandstone of different formations, reconstructs the diagenetic sequence, and constructs an evolution model of reservoir minerals and porosity. The research results indicate depositional processes laid the foundation for the original reservoir properties. Sandstones deposited in tidal flat and deltaic environments exhibit superior initial reservoir qualities. Compaction is a critical factor leading to the decline in reservoir quality across all formations. However, rigid particles such as quartz can partially mitigate the pore reduction caused by compaction. Early diagenetic carbonate cementation reduces reservoir quality by occupying primary pores and hindering the generation of secondary porosity induced by acidic fluids, while later-formed carbonate further densifies the sandstone by filling secondary intragranular pores. Clay mineral cements diminish reservoir porosity and permeability by filling intergranular and intragranular pores. The Shanxi and Taiyuan Formations display relatively poorer reservoir quality due to intense illitization. Overall, the reservoir quality of Benxi Formation is the best, followed by Xiashihezi Formation, with the Taiyuan and Shanxi Formations exhibiting comparatively lower qualities. Full article

This study evaluates the performance degradation of spray rigid polyurethane foam (RPUF) insulation on reservoir dam structures under multi-physics coupling conditions. Focusing on characteristic environmental exposures in Hot Summer and Cold Winter (HSCW) climate zones, accelerated aging tests simulating coupled temperature–humidity effects were conducted to comparatively analyze the thermal resistance and durability evolution between unprotected and encapsulated RPUF configurations. Scanning electron microscopy (SEM), infrared spectroscopy (IR), and other methods were used to characterize and analyze the structure of RPUF. Research has shown that in HSCW climate zones, the thermal conductivity of RPUF gradually increases with the number of degradation cycles, and the insulation performance decreases, mainly due to the damage of the pore structure caused by temperature aging and the combined effect of moisture absorption aging. In comparison, the RPUF after protection can effectively slow down the rate and degree of decline of its insulation performance. On this basis, a time-varying prediction model for the thermal conductivity of RPUF under long-term service in HSCW climate environments was fitted, providing a scientific basis for the durability evaluation of reservoir dam insulation. Full article

In order to clarify the pore evolution and coupling characteristics with hydrocarbon charging in the deep-buried ultra-tight sandstone reservoirs of the second member of Xujiahe Formation (hereinafter referred to as the Xu 2 Member) on the eastern slope of the Western Sichuan Depression, this study integrates burial history and thermal history with analytical methods including core observation, cast thin section analysis, scanning electron microscopy, carbon-oxygen isotope analysis, and fluid inclusion homogenization temperature measurements. The Xu 2 Member reservoirs are predominantly composed of lithic sandstones and quartz-rich sandstones, with authigenic quartz and carbonates as the main cementing materials. The reservoir spaces are dominated by intragranular dissolution pores. The timing of reservoir densification varies among different submembers. The upper submember underwent compaction during the Middle-Late Jurassic period due to the high ductility of mudstone clasts and other compaction-resistant components. The middle-lower submembers experienced densification in the Late Jurassic period. Late Cretaceous tectonic uplift induced fracture development, which enhanced dissolution in the middle-lower submembers, increasing reservoir porosity to approximately 5%. Two distinct phases of hydrocarbon charging are identified in the Xu 2 Member. The earlier densification of the upper submember created unfavorable conditions for hydrocarbon accumulation. In contrast, the middle-lower submembers received hydrocarbon charging prior to reservoir densification, providing favorable conditions for natural gas enrichment and reservoir formation. Three sweet-spot reservoir development patterns are recognized: paleo-structural trap + (internal source rock) + source-connected fracture assemblage type, paleo-structural trap + internal source rock + late-stage fracture assemblage type, and paleo-structural trap + (internal source rock) + source-connected fracture + late-stage fracture assemblage type. Full article

The spatiotemporal heterogeneity of moisture distribution causes the coal pillar dams in underground water reservoirs to undergo long-term dry–wet cycles (DWCs) under varying moisture content increments (MCIs). Accurately measuring the pore damage and fractal dimensions (D_f) of coal rock by different MCIs under DWCs is a prerequisite for in-depth disclosure of the strength deterioration mechanism of underground reservoir coal pillar dams. This study employed low-field nuclear magnetic resonance (LF-NMR) to quantitatively characterize the pore structural evolution and fractal dimension with different MCI variations (Δw = 4%, 6%, 8%) after one to five DWCs. The results indicate that increasing MCIs at constant DWC numbers (N_DWC) induces significant increases in pore spectrum area, adsorption pore area, and seepage pore area. MRI visualization demonstrates a progressive migration of NMR signals from sample peripheries to internal regions, reflecting enhanced moisture infiltration with higher MCIs. Total porosity increases monotonically with MCIs across all tested cycles. Permeability, T₂ cutoff (T_2C), and D_f of free pores exhibit distinct response patterns. A porosity-based damage model further reveals that the promoting effect of cycle numbers on pore development and expansion outweighs that of MCIs at N_DWC = 5. This pore-scale analysis provides essential insights into the strength degradation mechanisms of coal pillar dams under hydro-mechanical coupling conditions. Full article

The Sichuan Basin is a key area for shale gas energy exploration in China. However, the pore evolution mechanism and accumulation effect of the Lower Jurassic continental shale gas in the northeastern Sichuan Basin remain poorly understood. In this study, the pore structure characteristics of shale reservoirs and the dynamic accumulation and evolution of shale gas in the northern Fuling and Yuanba areas were systematically analyzed by adsorption experiments, high-pressure mercury injection joint measurement, and thermal simulation experiments. The results indicate the following: (1) The continental shale in the study area is predominantly composed of mesopores (10–50 nm), which account for approximately 55.21% of the total pore volume, followed by macropores (5–50 μm) contributing around 35.15%. Micropores exhibit the lowest proportion, typically less than 10%. Soluble minerals such as clay minerals and calcite significantly promote pore development, while soluble organic matter may block small pores during hydrocarbon generation, which facilitates the enrichment of free gas. (2) The thermal simulation experiment reveals that pore evolution can be divided into two distinct stages. Prior to 450 °C, hydrocarbon generation leads to a reduction in pore volume due to the compaction and transformation of organic matter. After 450 °C, organic matter undergoes cracking processes accompanied by the formation of shrinkage fractures, resulting in the development of new macropores and a significant increase in pore volume. This indicates that thermal energy input during the thermal evolution stage plays a key role in reservoir reconstruction. (3) The early Jurassic sedimentary environment controls the enrichment of organic matter, and the Cretaceous is the key period of hydrocarbon accumulation. Hydrocarbon generation and diagenesis synergistically promote the formation of gas reservoirs. The Cenozoic tectonic activity adjusted the distribution of gas reservoirs, and finally formed the enrichment model with the core of source–reservoir–preservation dynamic matching. For the first time, combined with dynamic thermal simulation experiments, this study clarifies the stage characteristics of pore evolution of continental shale and identifies the main controlling factors of shale gas accumulation in the Lower Jurassic in northeastern Sichuan, which provides a theoretical basis for continental shale gas exploration and energy resource development, offering important guidance for optimizing the selection of exploration target areas. Full article

The Upper Triassic Xujiahe Formation in the western Sichuan Basin is rich in natural gas resources and is one of the main tight sandstone gas-producing layers in the Sichuan Basin. Taking the tight sandstone of the second member of the Xujiahe Formation (Xu-2 Member) in the western Sichuan Basin as the study target, based on the analysis of the rock sample, a thin section, scanning electron microscopy, inclusion, the carbon and oxygen isotope, the petrological characteristics, the reservoir properties, the diagenetic sequences, and the pore evolution processes were revealed. The tight sandstones are composed of litharenite, sublitharenite, and feldspathic litharenite with an average porosity of 3.81% and a permeability mainly ranging from 0.01 to 0.5 mD. The early to late diagenetic stages were revealed, and the diagenetic evolution sequence with five stages was constructed. The Xu-2 sandstones were subdivided into three different types, and each type has its own tightening factors and processes. In the quartz-rich sandstone, the compaction and pressure solution were the primary causes of reservoir tightening, while late fracturing and dissolution along fractures were the main factors improving reservoir properties. In the feldspar-rich sandstone, early dissolution was a primary factor in improving porosity, while carbonate and quartz cements generated by dissolution contributed to a decrease in porosity. In the rock-fragment-rich sandstone, chlorites formed in the early stage and dissolution were the main factors of reservoir quality improvement, while the authigenic quartz formed in the middle diagenetic stage was the primary cause of reservoir tightening. Four major source-to-sink systems were identified in the western Sichuan Basin and they have different reservoir characteristics and reservoir quality controlling factors. This study will contribute to a deeper understanding of the characteristics, diagenetic evolution, and tightening process of tight sandstone reservoirs, effectively promoting scientific research and the industrial development of tight sandstone gas in the Xu-2 Member of the Sichuan Basin. Full article

The deposition and evolution of ice-rich materials on Martian surfaces offer valuable insights into climatic evolution and the potential driving forces behind global climate change. Substantial evidence indicates that the mid-latitudes of Mars played a crucial role in the formation and development of glacial and periglacial landforms during the Amazonian period. However, few studies have comprehensively examined ice-related landforms in the low-latitude region of Mars. Whether extensive glacial activity has occurred in the equatorial region of Mars and whether there are any potential geological records of such activities remain unclear. In this study, we analyzed remote sensing data from the Martian equatorial region (0°–±30°) and identified existing glacial/periglacial features, as well as remnant landforms of past glaciation. Our findings reveal that glaciation at low latitudes is more widespread than previously thought, with ice-related remnants extending as far equatorward as 13°N in the northern hemisphere and 19°S in the southern hemisphere, highlighting a broader latitudinal range for ice-related landforms. These landforms span multiple episodes of Martian geological history, supporting the hypothesis on the occurrence of repeated glaciation and various high-obliquity events. Evidence of dynamic interactions between ice deposition and sublimation in low-latitude regions demonstrates substantial ice loss over time, leaving ice-related remnants that provide valuable insights into Mars’ climatic evolution. Based on volumetric estimates of the concentric crater fill (CCF), the low-latitude regions of Mars may contain up to 1.05 × 10³ km³ of ice. This corresponds to a global equivalent ice layer thickness ranging from 21.7 mm (assuming a pore ice with 30% ice content) to 65.1 mm (assuming glacial ice with 90% ice content), suggesting a potentially greater low-latitude ice reservoir than previously recognized. Full article

The heterogeneity of shale pore systems, which is controlled by thermal maturation, fundamentally governs hydrocarbon storage and migration. Artificial sequence maturity samples of Xiamaling shale were obtained through a temperature–pressure simulation experiment (350–680 °C, 15–41 MPa). In combination with low-pressure CO₂/N₂ adsorption experiments, mercury intrusion porosimetry experiments and fractal theory, the heterogeneity of the pore size distribution of micropores, mesopores and macropores in shale of different maturities was quantitatively characterized. The results reveal that the total porosity follows a four-stage evolution with thermal maturity (R_o = 0.62–3.62%), peaking at 600 °C (R_o = 3.12%). Multifractal parameters indicate that areas with a low probability density are dominant in terms of pore size heterogeneity, while monofractal parameters reflect enhanced uniform development in ultra-over maturity (R_o > 3.2%). A novel Fractal Quality Index (FQI) was proposed to integrate porosity, heterogeneity, and connectivity, effectively classifying reservoirs into low-quality, medium-quality, and high-quality sweet-spot types. The findings contribute to the mechanistic understanding of pore evolution and offer a fractal-based framework for shale gas reservoir evaluation, with significant implications for hydrocarbon exploration in unconventional resources. Full article

The fractal dimension quantitatively describes the complexity of the shale pore structure and serves as a powerful tool for characterizing the evolution of shale reservoirs. Thermal simulation experiments were conducted on the low-maturity transitional shale from the Shanxi Formation in the Ordos Basin. The initial samples consisted mainly of quartz (39.9%) and clay minerals (49.9%) with moderate-to-good hydrocarbon generation potential. Samples from different thermal maturation stages were analyzed through geochemical, mineralogical, and pore structure experiments to reveal the evolution of mineral compositions and pore structure parameters. The fractal dimensions of the pore structure were calculated using both the FHH and capillary bundle models. Correlation coefficients and principal component analysis (PCA) were employed to explore the factors influencing the fractal dimension and its evolutionary patterns during reservoir development. The results indicate that (1) with increasing thermal maturity, the quartz content gradually increases while the contents of clay minerals, carbonate minerals, pyrite, and feldspar decrease. (2) The evolution of porosity follows five stages: a slow decrease (0.78 < Ro < 1.0%), a rapid increase (1.0% < Ro < 2.0%), a relatively stable phase (2.0% < Ro < 2.7%), a rapid rise (2.7% < Ro < 3.2%), and a slow decline (Ro > 3.2%). The evolution of the pore volume (PV) and specific surface area (SSA) indicates that the proportion of pores in the 5–20 nm and 20–60 nm ranges gradually increases while the proportion of pores smaller than 5 nm decreases. (3) The fractal dimension of shale pores (D₁, average value 2.61) derived from the FHH model is higher than D₂ (average value 2.56). This suggests that the roughness of pore surfaces is greater than the complexity of the internal pore structure at various maturities. The D_M distribution range calculated from the capillary bundle model was broad (between 2.47 and 2.94), with an average value of 2.84, higher than D₁ and D₂. This likely indicates that larger pores have more complex structures. (4) D₁ shows a strong correlation with porosity, PV, and SSA and can be used to reflect pore development. D₂ correlates well with geochemical parameters (TOC, HI, etc.) and minerals prone to diagenetic alteration (carbonates, feldspar, and pyrite), making it useful for characterizing the changes in components consumed during pore structure evolution. (5) Based on the thermal maturation process of organic matter, mineral composition, diagenesis, and pore structure evolution, an evolutionary model of the fractal dimension for transitional shale was established. Full article

Studies of hydrocarbon migration and enhanced oil recovery focus on the effects of reservoir heterogeneity on subsurface fluid flow and distribution. Differential diagenesis in clastic rock reservoirs is an important factor of internal-reservoir heterogeneity and its relationship to hydrocarbon charges is a key scientific issue for understanding hydrocarbon accumulation mechanisms in tight-sandstone reservoirs. This paper focuses on the ninth member of the Upper Triassic Yanchang Formation (Chang 9), located in the central and western Ordos Basin, China. The aims of the paper are to examine the differential diagenesis of sandstone reservoirs and to illustrate the process of organic/inorganic fluid–rock interaction using an integrated method of petrography, UV fluorescence spectra, fluid inclusion, and basin modeling analyses. The Chang 9 reservoir comprises four sandstone types: mechanically compacted sandstone, calcite-cemented sandstone, water-bearing sandstone, and oil-bearing sandstone. These four types of sandstone experience contrasting diagenetic evolutions. During early diagenesis, mechanically compacted sandstone and calcite-cemented sandstone undergo strong deformation and cementation, respectively. The water-bearing and oil-bearing sandstones experience similar diagenetic evolutions, but significantly different from those two tight sandstones in fluid activity and diagenesis magnitude. Three types of porous bitumen were identified in the oil-bearing sandstone, whereas no bitumen was identified in the water-bearing sandstone. According to the contact relationship between bitumen, cements, and dissolution pores, the related diagenesis sequence of the oil-bearing sandstones of Chang 9 was reconstructed. Three phases of fluid flow occurred in turn, with hydrocarbon charging in the process, but no hydrocarbon charging occurred in the water-bearing sandstones. The research findings, in terms of organic and/or inorganic fluid–rock interaction, can be used as a reference for the differential diagenesis and process of fluid–rock interaction in low-permeability sandstone reservoirs with a highly heterogeneous internal reservoir framework. Furthermore, this study could help in understanding the internal heterogeneity characteristics of a fluvial sandstone reservoir and its relationship with hydrocarbon charging. Full article