Search Results (1,180)

The Gulf of Taranto (Ionian Sea) is a key transitional sector between the Southern Apennines collisional belt and the Calabrian Arc system, where the expression of Pleistocene–Holocene deformation in the shallow stratigraphic record remains debated. This study focuses on the Taranto Canyon area, the main morphologic feature of the northeastern Gulf of Taranto slope. We integrate high-resolution multibeam bathymetry (10 m grid) with Sparker seismic profiles to (i) define the shallow seismo-stratigraphic framework and (ii) document spatial relationships between shallow discontinuities, morphostructural lineaments, and submarine channel network organization. A simplified tie to the Livia 001 well constrains the subdivision of the shallow succession into four seismic units: the late Pleistocene–Holocene unit (PtH), the Santerno Formation (SNT), the Calcarenite di Gravina (GRA), and the Cupello Limestones (CPL). The PtH interval shows the strongest lateral variability and includes widespread acoustically disturbed bodies and recurrent sub-vertical fluid escape acoustic anomalies. Steep discontinuities producing reflector terminations, minor vertical separation, and localized bending affect PtH and, locally, SNT, with normal fault geometries prevailing where resolvable. Bathymetric mapping reveals multiple lineament families and preferred channel orientations that persist across higher Strahler orders, supporting a structurally conditioned template that guides seafloor morphology, sediment routing, and canyon–slope evolution in the northeastern Gulf of Taranto. Full article

The external quantum efficiency (EQE) of InGaN-based LEDs typically decreases as wavelength shifts from blue to green to red. While this trend has often been attributed to the internal quantum efficiency of InGaN quantum wells (QWs), the influence of light extraction efficiency (LEE) on the wavelength-dependent EQE has received less attention. In this study, we numerically investigated the LEE of blue, green, and red InGaN micro-LED structures using finite-difference time-domain simulations, including the dispersion of composite materials. We first optimized the distance between the QW and the Ag reflector for each color, then evaluated the total LEE and the LEE within a 20° collection angle as the micro-LED structure diameter varied. For diameters ranging from 2 to 6 μm, green and red micro-LEDs exhibited average LEE values that were over 10% and 20% higher than those of blue micro-LEDs, respectively. This is attributed to the decreasing refractive index of GaN and increasing reflectance of the Ag reflector as the wavelength increases. Such substantial variations in LEE among blue, green, and red InGaN micro-LEDs highlight the importance of considering wavelength-dependent LEE when interpreting measured EQE results. Full article

Hafnium oxide (HfO₂) is predominantly used as a high-index material in multi-layer dielectric coatings for high-peak- and high-average-power lasers, but laser damage often initiates within the HfO₂ layers despite their wide bandgap. Oxygen deficiency during deposition can introduce vacancy-related sub-bandgap states and absorptive defects, lowering damage resistance. This study investigates how oxygen flow during HfO₂ deposition with ion beam sputtering (IBS) affects its stoichiometry, defect formation, and nanosecond laser-induced damage threshold (LIDT) and whether single-layer trends predict multilayer performance. Single layers were deposited at varying oxygen flows, characterized for optical and structural properties, and tested for the LIDT at 1064 nm and 355 nm. Increasing oxygen flow drove the layer toward near-stoichiometric HfO₂, reduced the refractive index, and altered the density of surface pinhole-like features. The single-layer LIDT at 355 nm increased with oxygen, whereas the 1064 nm LIDT was comparatively less sensitive to oxygen flow, consistent with the wavelength-dependent roles of absorptive precursors and microstructural defects. In contrast, a HfO₂-based high-reflector (HR) showed a higher LIDT at lower oxygen flow, indicating that the family of damage precursors changes between single layers and multilayers; in stacks, structural properties such as stress, gas entrapment and thermal dissipation may outweigh the isolated absorptive defects found in single layers. These results demonstrate that the optimal oxygen flow condition depends on both LIDT wavelength and film architecture. We identified, for single layers, a 15–35 sccm window for maximizing the 1064 nm LIDT and a high-flow optimum (45 sccm) for the 355 nm LIDT and, for 355 nm HR stacks, a distinct lower-flow regime (~10 sccm). Full article

This study investigates the core optimization of a Prismatic Solid Molten-Salt Reactor (PSMSR) to meet key objectives of compactness, high power density, and extended operational life. With graphite irradiation resistance being a paramount concern in high-flux environments, the analysis focuses on the influence of core height-to-diameter ratio, active zone size, and reflector thickness on the graphite displacement per atom (DPA) distribution and burnup performance. The results indicate an optimal active core configuration characterized by a 1:1 height-to-diameter ratio, a 175 cm active zone radius, and a 55 cm reflector. Building on these findings, reactivity-control strategies were refined. An evaluation of burnable-poison addition against fuel-loading optimization revealed that the latter, by adjusting the TRISO (TRi-structural ISOtropic) packing factor and control-rod dimensions, can meet the safety shutdown margin requirements and substantially improve the fuel utilization efficiency, ultimately achieving a burnup depth of 50.3 MWd/kgU and a 10-year operation lifetime without refueling at a 500 MWt power level. This research provides an effective technical solution for the modular deployment of solid-state molten-salt reactors in remote areas and in special application scenarios. This research offers a viable technical pathway for implementing solid-fueled molten-salt reactors in remote and specialized scenarios, enabling their modular deployment. Full article

Synthetic aperture radar (SAR), which appeared in the early 1990s, refers to a technology that creates a virtual large aperture by receiving/combining signals from various locations while moving with a fixed antenna. Using SAR-based image acquisition technology, a reconnaissance satellite can obtain high-quality images regardless of the weather and day/night conditions. In this study, the qualification tests of a space-grade 5m-class deployable reflector antenna for satellites, which is the primary payload of a SAR-based satellite, were conducted. In order to ensure the electrical performance of the reflector antenna, an alignment verification test was performed using a laser tracker system during the assembly and integration process. Generally, the satellite experiences a considerable amount of structural load under the launch condition and is exposed to extremely low- and high-temperature thermal environments under the orbital condition. For the space mission, environmental tests should be conducted to verify the structural/thermal stability for the launch and orbital conditions. A deployment repeatability test was conducted to ensure that the deployment mechanism operated properly before/after each test. The qualification process and philosophy proposed in this work could be applied to the development of the space-grade deployable reflector antenna. Full article

A robust and cost-effective fiber-optic ultrasound sensor based on a slope-symmetric Fabry–Perot interferometer (FPI) is presented, employing dual-channel quadrature-biased heterodyne interrogation with an acousto-optic modulator (AOM). By introducing a 200 MHz frequency shift that yields an effective π/2 phase offset between the direct (unshifted) and frequency-shifted optical paths, the system ensures complementary sensitivity: when one channel operates at zero slope on the FPI transfer function (minimum sensitivity), the other resides at maximum slope, providing inherent immunity to laser wavelength drift and environmental perturbations. Experimental validation demonstrates reliable ultrasound detection across varying operating points. At quadrature extremes, one channel achieves peak amplitudes of ±2 V while the other is quiescent, whereas intermediate points enable simultaneous detection with amplitudes of ±1.5 V (AOM channel) and ±0.05–0.1 V (direct channel), accompanied by corresponding DC levels ranging from ~0.4 V to 1.6 V. The AOM channel utilizes simple envelope detection after 9.5–11.5 MHz bandpass filtering, maintaining low cost, though coherent mixing is suggested for enhanced weak-signal performance. The angle-symmetric FPI design, combined with gold-disk reflector adaptations and potential femtosecond laser micromachining, further reduces fabrication costs without sacrificing finesse or sensitivity. This quadrature-biased approach offers superior stability compared to single-channel systems, making it highly suitable for practical applications in photoacoustic imaging, nondestructive testing, and structural health monitoring. Full article

Photonic-crystal surface-emitting lasers (PCSELs) are a new type of semiconductor laser with the potential for high-power output and high-beam-quality operation. Integrating a distributed Bragg reflector (DBR) into PCSELs can significantly enhance device performance. However, the growth of high-aluminum-content DBRs on photonic crystal layers with buried air holes presents two major challenges. First, the low mobility of aluminum atoms increases the propagation of surface roughness from the substrate into the DBR, increasing defect density. Second, the high growth temperatures required for DBR growth can deform the thermally unstable air holes. In this work, we investigated a metal–organic chemical vapor deposition (MOCVD) regrowth process for fabricating DBRs on PCSELs. By adjusting the epitaxial growth temperature and V/III ratio, we effectively controlled the diffusion of adatoms on both the sample surface and inside the holes. As a result, the root mean square (RMS) surface roughness decreased by ~96%, and uniform buried air holes were obtained, with a filling factor of ~ 18.8% and a depth of ~ 270 nm, without significant deformation. Finally, we fabricated a PCSEL device with a DBR structure, exhibiting a beam divergence angle of ~ 0.5° and a peak power of about 0.86 W. This study provides a key process solution for the development of PCSELs with high-quality DBR structures, enabling further improvement in optical output performance. Full article

This paper presents a process-controlled study of illumination engineering in single-photon avalanche diodes (SPADs) fabricated in a 110 nm standard CMOS image sensor (CIS) technology. Front-illuminated (FI) and back-illuminated (BI) SPADs were implemented with identical front-end-of-line (FEOL) structures, including the junction and guard-ring configurations, enabling the isolation of the effects of illumination direction and back-end-of-line (BEOL) configuration without modifying the junction structure. Through TCAD simulations and comprehensive experimental characterizations, including current–voltage, light-emission, dark count rate (DCR), photon detection probability (PDP), and timing-jitter measurements, we systematically analyze the performance trade-offs introduced by the BI configuration. The BI SPAD exhibits enhanced near-infrared PDP and a broader spectral response due to its deeper absorption region and the incorporation of a metal reflector, while maintaining identical avalanche characteristics, as evidenced by an unchanged 72 ps full-width-at-half-maximum (FWHM) timing jitter. However, the backside illumination increases the diffusion tail, indicating a trade-off between near-infrared sensitivity and diffusion-related timing performance. These results provide design guidelines for optimizing SPAD performance through illumination-direction and BEOL engineering while preserving the FEOL design and demonstrate a useful approach for SPAD integration in standard CMOS technology. Full article

Spaceborne synthetic aperture radar (SAR) absolute radiometric calibration relies on point targets with a known radar cross-section (RCS), such as triangular trihedral corner reflectors (TTCRs). Traditionally, radiometric calibration using TTCRs requires precise alignment of the corner reflector (CR) boresight to the radar line-of-sight (LOS), leading to frequent field operations and high labor dependency. In this study, a novel compact bidirectional trapezoidal CR is proposed to eliminate such alignment reorientations. The novel CR adopts three design considerations: a scalene shape to optimize the boresight elevation angle and enhance the peak RCS; a bidirectional configuration with azimuth fine-tuning to align with the radar LOS for both ascending and descending passes; and trapezoidal plate trimming to reduce the volume and weight without sacrificing RCS performance. An in-orbit validation is conducted in Xi’an, China, using the SuperView Neo 2-03 satellite. The results demonstrate that the imaging quality of the bidirectional trapezoidal CRs is comparable to that of conventional TTCRs, with all the parameters meeting system specifications. The radiometric calibration constant of the bidirectional trapezoidal CR differs from that of the conventional TTCR by no more than 0.27 dB, with a total uncertainty of ~0.33 dB (1σ)—demonstrating that it achieves equivalent radiometric calibration accuracy to TTCRs. The experiment confirms the feasibility and engineering applicability of the bidirectional trapezoidal CR for X-band SAR radiometric calibration. Full article

Oxide materials represent a versatile and fundamental platform for photonics, allowing the manipulation of light through optical property engineering. This review focuses mainly on the physics and applications of simple oxides, analysing their use in the realisation of dielectric mirrors, in particular of distributed Bragg reflectors, and planar microcavities. Critical aspects regarding the design of multilayer structures, the control of optical confinement and the improvement of the quality factor in passive devices are discussed. However, to provide a complete picture of the evolution of the field, the section dedicated to oxide materials anticipates future directions dominated by complex oxides such as lithium niobate, lithium tantalate and barium titanate required for active photonics. In this context, a necessary technological paradigm shift is highlighted: the transition from the current use of film-on-insulator platforms to the direct epitaxial growth of these functional materials, an essential step for the scalability and monolithic integration of future photonic devices. Full article

This work presents a silicon-on-insulator (SOI) refractive index sensor based on a coupled resonator optical waveguide (CROW) architecture employing two inversely coupled Sagnac loop reflectors (SLRs) connected through a self-coupled feedback waveguide. The structure exploits bidirectional propagation and discrete–continuum interference to produce sharp Fano-type asymmetric resonances with steep spectral slopes, enabling enhanced wavelength sensitivity. Numerical analysis demonstrates that tuning the loop radius, directional-coupler length, coupling gap, and feedback-path length provides precise control over free spectral range (FSR), resonance asymmetry, and spectral sharpness. The sensor exhibits consistent and monotonic resonance shifts for refractive index variations from 1.33 to 1.36, with sensitivities ranging from 106 to 120 nm/RIU for the ridge feedback configuration. Sensitivity is further improved by introducing a subwavelength grating (SWG) segment into the feedback waveguide, which enhances evanescent-field interaction and increases the overlap factor without compromising compactness or Fano asymmetry. The SWG-assisted design attains sensitivities of 185.8–212.2 nm/RIU, nearly doubling sensitivity. The proposed coupled-SLR CROW provides a compact footprint, high-Q resonances, and flexible spectral engineering through accessible geometric parameters. These characteristics highlight the potential of the coupled-SLR and SWG-enhanced CROW as a promising platform for high-resolution, photonic refractive index sensing applications on SOI. Full article

A parabolic trough collector (PTC) is a linear concentrating system consisting of a parabolic-shaped reflector with a receiver tube positioned along the focal axis. In this study, the performance of a parabolic trough solar collector is evaluated, with aperture area, collector length, breadth, Rim angle, and inner and outer absorber diameters of 5.54 m², 3.65 m, 1.52 m, 70°, 0.048 m, and 0.05 m, respectively. The experiment was conducted at Ranchi, India (23.35° N and 85.30° E). During this day, marked by a cloudless sky, the ambient temperature ranged from 27 °C to 39 °C. The global solar radiation ranged from (630 W/m² to 975 W/m²), and the wind speed varied between (0.8 m/s and 1 m/s). Aluminium oxide (Al₂O₃) and Therminol VP-1-based nanofluid were employed as the working fluid. The different volume fractions of nanoparticles were taken, and the evacuated tube PTC performance was analysed. When Al₂O₃–Therminol VP-1 of varying concentration (0–4%) and mass flow rate of 0.041 kg/sec is used, it has been observed that the receiver’s heat transfer performance improved with an increment in nanoparticle volume fraction. Temperature-dependent properties were applied to the thermal efficiency, exhibiting a notable increase of approximately 7.2% when the volume fraction ascends from 0 to 4%. At elevated Reynolds numbers, the efficiency decreases compared to lower volume fractions. These results contribute to understanding the effect of nanoparticle concentration on PTC performance. Full article

In this letter, a circularly polarized (CP) 4 × 4 array antenna generating a fan-beam radiation pattern is presented, along with its application as the primary pattern of an offset reflector antenna. A sequentially rotated feed network is incorporated into the proposed antenna, enabling a wide axial ratio (AR) bandwidth of 1.9 GHz centered at 8.2 GHz. The proposed array antenna generates about 27.5° and 14.5° of half-power beamwidth (HPBW) in $\varphi =0°$ and $\varphi =90°$ planes, respectively. The fabricated antenna shows good agreement with the simulated results in terms of impedance bandwidth, gain, and radiation characteristics. Furthermore, the offset reflector antenna fed by the proposed CP array is evaluated, resulting in a gain enhancement of approximately 17 dB and a fan-beam radiation characteristic with half-power beamwidths of 3.95° and 2.15°, with an axial ratio bandwidth of 1 GHz. Full article

Heliostats constitute essential elements within concentrating solar power (CSP), where their structure, load profiles, and operational environment render wind loads a critical factor in their design considerations, as these loads directly impact the cost of energy generation. The aerodynamics significantly influence wind-induced effects, resulting in considerable variability in wind loads among different heliostat geometries. This study utilizes the Computational Fluid Dynamics (CFD) methodology to systematically examine the aerodynamic behavior of an isolated pentagonal heliostat. Employing the Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations with an atmospheric boundary layer inlet condition, the investigation focuses on the flow field and wind load characteristics at four representative pitch angles: 0° (stow position), 30°, 60°, and 90°. Findings indicate that the pitch angle exerts a decisive impact on flow separation patterns. Specifically, as the elevation angle decreases, the flow regime shifts from being predominantly influenced by the mirror surface to being governed by the support structure, mediated through an interactive coupling between these components. At the 60° operational pitch angle, the pentagonal heliostat’s distinctive corner geometry induces an asymmetric vortex configuration—characterized by a smaller vortex at the top and a larger one at the bottom—thereby disrupting the conventional vortex distribution observed in symmetric heliostat designs. A further analysis of wind load characteristics indicates that, compared to a quadrilateral heliostat, the pentagonal mirror exhibits a significantly lower Elevation Moment Coefficient, despite a slight increase in the normal force coefficient. This reduction is attributed to a balancing mechanism: the “vortex structure asymmetry” creates an upper-large–lower-small distribution of absolute negative pressure on the support surface, while the “stagnation point position” shift with elevation angle produces an upper-small–lower-large distribution of absolute positive pressure on the reflector. The interaction between these opposing trends minimizes the net pressure differential across the mirror height, thereby contributing to superior overall aerodynamic performance. The reduction in the elevation moment coefficient contributes to enhanced structural wind resistance, thereby improving the overall energy efficiency and economic viability of concentrating solar power. Full article

Planar mirrors play a crucial role in autocollimation testing and optical beam relay systems of telescopes and other fields. However, for the next-generation large-aperture telescopes, typical monolithic planar mirrors fall short in meeting anticipated performance requirements, owing to their high costs and fabrication limitations. Here, a new integrated multimodal testing method for 3–4 m-class segmented planar mirrors is proposed. The presented system utilizes an innovative keystone architecture with a central mirror and keystone-shaped segments, which is superior to the traditional hexagonal architecture. To facilitate rapid coarse alignment, a machine vision system based on edge detection is investigated. Furthermore, the dispersed fringe technique is used for robust co-phasing. By using a segmented planar mirror designed with sub-aperture stitching strategy and combining local apertures, the system cost was reduced and high-precision measurement was achieved. Eventually, the alignment, co-focus and co-phasing measurements based on the proposed concept were completed, and the transfer characteristics were determined by analyzing the Optical Transfer Function (OTF). Test data shows co-phasing accuracy of better than 30 nm RMS (root-mean-square) and alignment accuracy less than 10 arcseconds. In addition, the system uses small-aperture mirrors in autocollimation testing to facilitate flexible alignment and testing of individual segments. The test optical path is configured to match the effective focal length of the system under test, and the optical lever effect of reflectors enhances the alignment sensitivity. The method combines autocollimation and wavefront sensing which allows the approach to provide high-precision control of co-focus, co-phasing, and surface errors correction. Full article